Default Text Settings Issue

After I installed InDesign CS3 on my new Mac, I created a new document and added a text frame. I turned on the All Small Caps function and now it seems that every time I use the text tool to draw a new text frame, even in different documents, that setting is the only setting that seems to be set. How can I turn this off? Thanks in advance!

With no document open, click OFF the Small Caps function.

Similar Messages

  • Default Text in Transportation (Shipment)

    Hi Gurus
    Need yr expertise.. I need to maintain certain default texts for a customer in shipment (transportation).. How can I maintain those texts? Where should I maintain it? Can I maintain it in customer master, so that whenever there is shipment it will be copied over? I try to find the text in the customer master but it is only showing in the sales order but not shipment..
    Pls advise..
    Sanjay

    Hi Sanjay Gupta,
    Texts in the SD module carry and share information, such as shipping instructions, through master data and transactional data. You can configure the system to propose the text from the master data or within a document and carry it across the supply chain process. The system then can copy the text to subsequent documents, so you don’t need to enter the information again. You also can use the text as an instruction for subsequent processes — for example, a note in the delivery document that specifies pick-up instructions.
    For instance, you could record customer instructions for receiving the goods. You also could use texts when you have an agreement that is about to expire and you want to send a note with the document that accompanies the goods you send the customer. Another example would be if your customer would like to receive products in a particular sequence. In this case, you could include this information in the shipping instructions, which would notify the warehouse folks of the request before they ship the product.
    the t.code is VOTXN to setup text determination. here you can select it for sales document header item, delivery and billing header item details. Also you can do it customer texts. you can configure the text procedure which contain several text ids which during the sales order can be used to maintain additional information.
    Maintian the Test in Customer master as well Shipping Header Data
    Please check your Config Settings again.
    Please let me know if have any issues and Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • Default printer settings for HP Deskjet 882c

    All I want to do is set this printer to print in black and white by default. If I wanted color, I would use my other printer ... I want faster than a snails pace so I brought this one back out.
    Being a PC for my entire life, this should be an easy thing to set the default print settings on the printer. I don't see them!
    What I am printing is emails off hotmail ... tons of them ... going back months ... so please don't ask me to add an additional step here ...
    Pulling my hair out here ... help would be lovely!

    You are on the right track for sure. The claim code is in fact printed in blue, so if your color inks are low or empty it will not show up. 
    I noticed there are 2 version of the 6500A, I will go under the assumption that you do not have the 'Plus' version since you didn't specify this, shouldn't be a big discrepancy either way (let me know if I am wrong).
    Viewing your ink levels is covered here, your Cyan ink cartridge could be empty : http://goo.gl/RjIhbp
    You can still find the claim code on the front panel of your printer without color ink. Go back to web services on your printers display and it will show your "*@hpeprint.com" email address. The prefix before the "@" is in fact your code.
    Also note that your code has most likely expired, which happens after 24 hours of being generated. Not a big deal. If your code has expired you will have to reset the web services in your printer, this will generate a new printer code. You can do this easily from the front panel of your printer.
    Follow this link and expand the section “What if I lose my printer code before registering?” under “Frequently asked questions (FAQs)”
    http://goo.gl/0WUyIe
    (*a note on step 4, some firmware updates may have simplified this entire step to be simply “remove web services”)
    After enabling the web services again the printer code area will still be blank if you are out of cyan ink. 
    Regardless the new code will display on the front panel (under web services).
    I hope this gets you going with ePrint. Let me know if you are having issues printing in color beyond this, or if you are still experiencing difficulties with ePrint.
    I work on behalf of HP.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Premiere Elements 12 will not allow me to add any more 'Default Text'

    Premiere Elements 12 will not allow me to add any more 'Default Text'. Being using it fine up until today! Created over 80 words so far for subtitles but for some reason it wont allow me today!!!

    Dave
    Thanks for the follow up. Interesting result.
    What is the specific Music Score that you used in the Premiere Elements 12/12.1 Mac Soundtrack that was limiting you in the number of words that could be included as text in the project's opened Titler?
    Please confirm
    a. Working in Expert workspace or Quick workspace?
    and
    b. Was the 12.1 Update in effect before and after you observed that the Music Score soundtrack removal resolved the issue of number of words limit in the Titler?
    and
    c. Did the Titler problem exist if you replace the Music Score soundtrack with a non Music Score music file?
    and
    d. If you moved the Music Score soundtrack to one of the numbered Audio Tracks, did the Titler problem exist?
    If you have no Music Score soundtrack in the project, create your title of 80 plus words in the Titler, close the Titler, and then bring the Music
    Score soundtrack to the project's Soundtrack, does that strategy work for you?
    The above information will help me to think about what happened in your case and give me more insight into how to prevent it happening to
    you in future projects.
    Thanks.
    ATR

  • Can I change default text size in CS5

    Every new document seems to open with a default text size of 12 pt. (or 0.167 inches). I am a sign maker and my typical artboard size is often 120" x 120" or larger.
    Is there a way to change the default text size so that new documents open with a text size of, say, 1 inch (or 3 inches, etc)?
    Any help would be greatly appreciated.
    thanks,
    Duncan McLean

    Open the New Document Profile that you use the most (from HD>Users><yourname>>Library>Application Support>Adobe>Adobe Illustrator CS5>en_US>New Document Profiles) or the equivalent path in Windows. Then go to Window>Type>Character Styles and double click on the [Normal Character Style] at the top of the list and modify the settings there to your liking. Save the document and restart AI.
    Here's a view

  • Excel 2010 ignores print server's default color settings.

    Excel 2010 ignores print server's default color settings.
    Our Setup:
    Printers are hosted on Server 2008 R2 Print Server. 
    Two local printers are created on the print server for each Xerox MFP that we have.   Example: Xerox MFP (B&W) - Default settings are set to print black and white only.    Xerox MFP
    (Color) - Default settings are set to print color.     So for every MFP we have two printers are created.
    Both variations of the network printers are deployed to the users with the Black and White version being the default.    If a user needs to print something in color, they select the Color version of the MFP printer.   This
    helps us save on color toner costs. 
    This works great for web applications, Microsoft Word, Adobe Reader, and other applications.   But, it doesn't seem to work in Microsoft Excel 2007 or 2010.   Whatever the default printer is of the two versions that are deployed,
    excel seems to hold onto those printer settings.
    Example: If your default printer is Xerox MFP (B&W), when you select Xerox MFP (Color), it still retains the Black and White selection in the printer properties.  However, if you select a completely different model printer such
    as Fax, and then go to  Xerox MFP (Color), it will pick up the necessary default color settings.
    If I install the printers locally on the user's PC/Computer, it works perfectly.   However, it doesn't work when they are utilizing the print server's printers.
    Things that I have tried:
    Different drivers for Xerox.  Global, PS, PCL.
    Different brands of printers.   Still experience the same issue.
    Different port names.  
    Different protocols, raw versus LPR.
    Different versions of excel, 2007 and 2010.
    Looked through group policy to see if I could force it. 
    Checked the excel sheet settings, black and white only was not selected.
    Tried most of the printer properties settings. 
    Created a Server 2012 print server and experienced the same result. 
    Xerox's custom configuration file editor.
    *Something to note, if I have the black and white version utilize PostScript Drivers and the color version utilize PCL driver, it correctly loads the color settings.   However, if you utilize Postscript for both versions, it doesn't. 
    I have to vary the print drivers.  Ideally, I don't want to have to do this because I want consistency between prints.

    Hi,
    Make sure you have the latest printer drivers - go to the manufacture's website, download and install if necessary.
    Jaynet Zhang
    TechNet Community Support

  • Default text size for a scaling/auto field

    Hi All,
    Im currently using Adobe Acrobat X Pro and am working in a PDF all written in size 10 font. I have text fields that need to be entered and scale if too much text is written. I've set the font size as 'Auto' and this scales without issue, however when the field is first entered and not yet scaled (as in, there is enough room for the text) it defaults to size 12. I'm needing this to default to size 10, and still be able to scale if too much text is entered, but I can't find any options for this. I essentially lose my ability to set the default text by setting it to 'Auto' yet it's still going to size 12 by default - how can I change this setting to size 10?
    I've tried searching various forums for this answer but can never find exactly what I'm after - Any help will be appreciated.
    Joel

    Thanks for the response George.
    If that's the case, would I be able to write an 'on mouse down' java script as a work around, or will these font sizes be dealt with the same. As in, if I change font size with a script to 10, will this effectively remove my 'auto' text size that allows scaling?

  • Change the default margin settings for the MS word!

    Hi All,
    BI Publisher version:latest 10.1.3.4
    DB:10.2.0.4
    Oracle Apps:12.0.6
    OS:AIX
    We are facing an issue of which description is as below:
    RTF output is being uploaded through "XML Publisher" Responsibility.
    3.1.9 Header and Footer Margin from Edge Not Preserved in RTF Output
    This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, and 10.1.3.4.1.
    Microsoft Word provides a Page Setup option for specifying the margin for the headers and footers from the edge of the page. This option is available by choosing the File menu, then Page Setup, then the Margins tab, and the From edge box. This margin setting is not retained when the output format is RTF. The output is created with the default margin settings instead. The margin settings do work correctly for other output formats such as HTML, PDF, and Excel.
    So, the "default setting" mentioned here is around 1/2 inch for MS Word which is getting added in the output, even if the margin in template is zero.
    Expected output:
    So what we need to do is -
    1. Check the MS word installation on the application server
    2. Change this default margin setting as top and bottom 0 on the server in the MS word page setup. (I can give you steps to do this in word if required)
    We have tried setting this margin to 0 on client side and generating the output and it makes no difference, so it must be coming from the server.
    We need to know how could we modify the settings and need to know te source and Check the MS word installation on the application server?
    Could anyone please share such an issue faced before!
    Thanks for your time!
    Regards,

    Hi All,
    Moreover,
    Our understanding about the RTF output is this -
    When we generate an RTF report output from Oracle EBS, the word document that is generated is with the settings of MS word that is installed on application server.
    This understanding could be wrong as we have never faced such situation before! We have come to this conclusion because the default settings that we do on client machine do not work.
    And as per the documentation of BI publisher the RTF should always be generated with the default settings of MS word.
    So what you could help us with is this -
    1. See if the MS word application is installed on application server ( if you think this is not application server, but any other server then please check there!)
    2. Change the default margin settings for the MS word.
    Regards,

  • Can I set Mail default text color

    Is there a way to set default text color for sent messages?  These settings don't seem to have any effect:

    Only way I know how is to save a Draft with some character, even a space with color set & use that to Draft send.
    Or maybe set a Favorite in CMD+t in Mail.

  • Will migration assistant change the default display settings on my new Mac?

    I just set up a new iMac and used Migration Assistant to load from my Time Machine. But now the display looks muted and not as bright. Would Migration Assistant change the default display settings on my new Mac?

    Migration Assistant may not be the cause. But you should reset the NVRAM and see it that fixes the issue.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the third time.
    Release the keys.

  • Reset hp envy 4500 printer to default factory settings

    The printer indicates that the cartridges are not suitable for this printer. That is strange, because both cartridges are original HP cartridges. I'm looking for a way to reset the printer to the default factory settings, but I can't find a way to do this neither in the manual nor on the printer itself. Does anyone have a suggestion? Thank you very much.

    did you find a way to resolve this? i am having the same error message and when i called for support, they said i just needed to buy a new printer.  Because of this error message blocking the entire screen, I cannot reset anything or access the main menu. It seems like it's an issue that needs to be fixed manually by taking the printer apart simply because there is not an emergency trick mentioned by staff or by manual that I have found. Any help besides replacing the idiot box all together?

  • How to set Default text when sending a blank mail from SAP

    Hi all,
    How to add Signature with company logo in the mail body.
    User should see at least one default text (eg; Hi) in the mail body if the sender did not type any text in the mail body when sending a mail from SAP.
    Is it possible to set like this on Subject also.
    Kindly share your ideas.
    Regards,
    Mathan A

    Hi Mathan,
    Please check sap note
    SAP Note No. 1304146 Email Signatures feature note
    1163250 - How to Create an Email Signature on several rows
    I hope it will solve your issue.PLease mark thread as answerd.
    Best Regards,
    Atul

  • Change default text in adf faces component in Webcenter Spaces

    Hi ,
    Here is the link that I found to change the default text in adf faces component. http://www.oracle.com/technetwork/developer-tools/adf/learnmore/49-skin-component-labels-169191.pdf
    Scenario is simple :
    Taskflow "ABC" is used in webcenter space through imported Library in spaces App. Taskflow "ABC"  have the pageFragment "view1" and fragment has a adf table on that page. I was trying to change the "Detach" text using below code in above provided instruction. 
    { "af_panelCollection.LABEL_DETACH_TABLE_DLG", "Any name for the Detachable Table" },
    { "af_panelCollection.LABEL_DETACH_TREE_TABLE_DLG", "Any name for the Detachable Tree Table" }
    Query/Problem : I did change in the trinidad-skins.xml of DesignWCSpaces app ... redeployed the war.. But the text didn't changed. The above steps worked fine for individual ADF application ... SO what's wrong with implementation on Webcenter Spaces ?

    Hi.
    Basically you have to do the following:
    Create an ADF JAR Library including your Skin (JS, Images, CSS Skin, Resources Bundles and trinidad-skins.xml)
    Deploy the ADF JAR Library as Shared-lib in WebLogic.
    Include in your weblogic.xml of the WebCenter Portal (Formerly Spaces) deployment via DesignWebCenterSpaces or the new extension the reference to the shared-lib.
    Restart WebCenter Portal (Spaces). When starting WebCenter Portal (Spaces) it looks inside of the Classpath for all trinidad-skins.xml files.
    Setup your custom skin for a Space and test.
    If the Skin is not selectable in the Administration Console then register your new skin downloading/updating/uploading from the MDS the generic-site-resources.xml file of the default scope GUID.
    If you still have issues then may I priorize a Blog entry explaining this .
    Regards.

  • Default object settings in templates?

    I would like to save highlight boxes size and color, mouse
    click properties, and others as default object settings for new
    recordings. After saving a movie as a template and creating a new
    movie from that template, objects in the recordings do not retain
    the properties I expected. Is there any way to set these
    defaults?

    You can do nothing about the mouse - that I can think of,
    anyway. The highlight boxes (including properties) as well as
    click-boxes, buttons, text-captions and other objects can be saved
    to just one or two slides in another movie, then opened in a 2nd
    instance of Captivate to be copied and pasted as needed into the
    "current" project.
    Without criticizing "templates", this simple "Library Movie"
    concept is similar but without the confusion-factor that some
    people have with templates.
    Have a good day!

  • Default text for a dimension in Webi

    Hi Experts,
    What is the default text which a dimension takes up in Webi report created on a universe and Bex query ?
    Here i have all three text maintained for a dimension - short, medium, long.
    and the properties in the IOBJ set as - Text and key,Text Type as medium text, Bex description as Long descritpion.
    I have not changed anything at the universe level (any text definition)
    The text which is coming in my webi report is coming as short text even though medium is set in the IOBJ properties.
    Please help me on this in understanding how the text are pulled in BO Webi report.
    regards,
    Amit Jain

    Hey  Amit,
    I faced with same problem,
    The WEBI view text according to definition in BEx Query in display properties of characteristic.
    If you build selection prompt based on this characteristic , there WEBI search engine use Provider Specific properties.
    I wrote a little blog post about this issue
    http://digilov.blogspot.com/2011/11/searching-by-bex-medium-text-problem-in.html
    I hope it will help you
    Regards,
    Aharon

Maybe you are looking for