Default to second button on burned disc

When I burn a Blu-ray disc from Encore the main menu shows up with the second button highlighted instead of the first one. This is for a list of text buttons arranged from top to bottom on the screen, and I've checked the assigned order in Encore to confirm it's correct.
Is there a simple fix for this?

I had the same problem with one of my submenus. In my case it defaulted to the 3rd button. I decided to redo that menu, so I removed all buttons on that menu, then added them back in the order in which I wanted them to be.
Bingo! When I go to that submenu from the main menu, it now defaults to the 1st button. However, that submenu is also accessible from another submenu. Using that route the troublesome submenu still defaults to the 3rd button!
I think there's a bug in CS3 in relation to this.

Similar Messages

Burned disc defaults to second button

I understand this may be a known problem but I don't see a solution posted here: when I burn a Blu-ray disc the main menu defaults to highlighting the second button even though the first button was properly assigned in Encore. This is for a menu where the chapters are linked to text-only buttons arranged from top to bottom on the screen.
Is there an easy fix for this?

I had the same problem with one of my submenus. In my case it defaulted to the 3rd button. I decided to redo that menu, so I removed all buttons on that menu, then added them back in the order in which I wanted them to be.
Bingo! When I go to that submenu from the main menu, it now defaults to the 1st button. However, that submenu is also accessible from another submenu. Using that route the troublesome submenu still defaults to the 3rd button!
I think there's a bug in CS3 in relation to this.

"Browse"button couldn't change to "Burn Disc"

itunes 7,Disc Driver DVD+-RW connected via usb and and recognized by itunes,windows XP Pro, mp3 songs authorized,creat playlist in itunes.
after inserting a blank disc, itunes shows me to choose the songs in playlist and to burn. But "Browse"button couldn't change to "Burn Disc", failed.

I have a similar issue. For me at least, it seems that I cannot move songs from my ipod into new playlists (and therefore the browse button does not change to burn). This is a recent development, in the last couple of days. I.e., I was previously able to create a new playlist and move songs into it for burning to CD. So, this does not pose any answer to your question, I just have a similar issue: the burn. Does anyone know of a solution?
compaq nc4010 Windows XP Pro

Missing "burn disc" button and preferences

Since upgrading to iTunes 8 there is now no "burn disc "button at the bottom right hand corner [only the genius symbol and an arrow]. As well there is no longer the option to choose what kind of CD to burn i.e MP3,CD or Data , in preferences.

I read some other posts and one guy said you have to create a playlist in the side bar, then open the play list. Once you do that the burn disc button will appear. If you are showing you entire library, the button will not show.
I just tried it and it works.

'burn disc' button non-existent

hi!
i've been able to burn cd's from itunes in the past, but now, i don't even get the 'burn disc' button in the upper right hand corner...can anyone pls help?
thanks!
karyl

Have you created a playlist to burn a CD from? The burn CD button is only present and visible in a playlist you wouldn't have one in the main library view because you can't burn a CD from the library: iTunes for Windows - Creating your own audio CDs

Burn Disc Button Disappears

Hi! I just bought a new computer and I am unable to burn playlists from my ipod that I owned before the computer. The burn disc button disappears when I make a playlist from my ipod under the subtitle devices. The burn disc button is there, however when I am under the playlists subtitle. The computer is authorized. Any ideas?

You can not burn a playlist on your ipod, it has to be on the PC and listed in iTUnes.
If you have an "On The Go" playlist, it should transfer to iTUnes if you have the "Auto Update" feature on

Burn Disc button at bottom not there

Howcome I do not have a "Burn Disc" button on the lower right hand corner of my itunes window? I tried to set up to burn a disc and that button does not appear which makes it a little difficukt to burn CD's. I have downloaded the most recent version of itunes and still nothing.

Have you created a playlist to burn a CD from? The burn CD button is only present and visible in a playlist you wouldn't have one in the main library view because you can't burn a CD from the library: iTunes for Windows - Creating your own audio CDs

When i right click on a playlist it is not giving me a burn disc option????

Can anybody help with this problem.
I right click on my playlists and am not getting a burn disc or burn playlist to disc option.
Is there another way i can try and burn a disc?
Thanks in advance.

This may be caused by the changes that Ubuntu makes.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Ubuntu 11.xx and later displays window menus in the control bar at the top of the screen with the switch to the Unity window manager.
* http://en.wikipedia.org/wiki/Ubuntu_Unity

Can you burn discs with the HP Pavilion H8-1224?

I tried telling the Geek Squad that my bottom silver button on the expansion bay won't workon my HP Pavilion H8-1224 & I can no longer burn discs. They said the button does not open anything but it used to. Am I losing my marbles?

Hi,
Yes, you can check supported blank discs from the following link:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03220156#N728
It ONLY has one Optical drive. I don't know how you could open the second button.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

The Attempt to burn disc failed. The burn failed because of a medium write error.

When trying to burn a CD, I'm getting an error that reads:The Attempt to burn disc failed. The burn failed because of a medium write error. I experienced this message before and took my Macbook in to the store and the the genius was stumped but when he tried one of his CD's it burned fine to he concluded that the problem was in the CD's NOT the Macbook or program HOWEVER, months later, I'm having the same issue using the NEW CD's. Does anyone have any information about this?

3 methods to fix this:
The first is to reset pram
at boot up hold four keys down till you hear 3 chimes:
command(apple)=option+p+r
release keys and it will now reboot.
The second is to reset nvram
at boot up hold four keys down:
command(apple)+option+o+f
a black screen will appear
now type: reset-nvram
click enter
now type: reset-all
click enter
it will now reboot
The third is to open system preferences.
go to international
under languages: drag any of the other languages to the top, then drag english back to the top.
make sure "order for sorted lists" is set to english
make sure "word break" is set to english(united states, computer)
then restart.
I hope this helps you as it certainly did me. :^)

CD Burner Troubleshooting: No Burner Disc or software found

I've had my iMac for just a couple months, slowly learning the ropes. I successfully burned a few CDs, but then one day it suddenly started giving me an error message when I click on "burn disc." It said: No Disc Burner or software found.
I tried to go to software updater under the apple/software update, but it told me there was no software that needed updating.
Any guidance?

Can you burn at all?
Does your burner show up in System Profiler?
To run System Profiler, select 'About This Mac' in the  menu.
Then click on the 'More Info...' button.
Expand the 'Hardware' section by clicking on the triangle.
Your disc burner can probably be found in 'ATA', otherwise try 'Serial-ATA'
Also check 'Disc Burning'. This should give more details about your burner.
On your system it should say at 'Burn support:' Apple supported or something like that.
Here's an example of my burner:
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.8) iTunes 7.0.1

Issues burning discs on iTunes/ error message about burn speed

I've never had problems burning discs on iTunes until today, I tried to burn one of my playlists on a Memorex CD-R.
- The burn seemed to be going OK at first, but the drive started making an obnoxious, loud noise by the 4th song out of 16.
- The progress bar in iTunes then said "burning disc, finalizing" even though the CD had not been finished.
- The drive practically launches the CD out, causing it to drop, rather than ejecting half way and holding it like usual. An error message came up saying something along the lines of, "iTunes cannot burn this CD because the burn speed is too high for the CD drive or media. Lower the burn speed in the burning pane of preferences"
- I tried it again without changing the burn speed (which I suppose was set to maximum) thinking it was something to do with the disc. The same thing happened the second time I tried to burn the disc. The reason I didn't change the burn speed when it asked me to was because I'd never been prompted about the burn speed and I've used the whole stack of these Memorex CD's without problems.
I am trying to figure out where the problem really lies - does this sound like an iTunes issue (which needs an update except that my system does as well), CD issue or a drive issue? Is there a more reasonable burn speed I should try next time?
Any help would be so appreciated, thank you!!
Message was edited by: Behnaz

Try a different brand. Highly recommended:
FUJI
TDK
Verbatim
Make sure the CDs are not dirty, smudged and/or scratched.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
Repair permissions after each burning session.

Error 4900 When burning discs PLEASE HELP ME !!!

When i try burning a disc from itunes, after about a minute of doing stuff the disc ejects and i get a message saying there was an error burning the disc (4900)
This has only started happening the past couple of weeks, before that i never had any trouble burning discs from itunes atall.
It is very frustrating as i havent a clue what it means or what to do about it, can anyone help me fix it???
Please!!!!!!!!!!!!!!!!!

I just ran the diagnostics test and this is the results
Microsoft Windows Vista Home Edition Service Pack 1 (Build 6001)
Acer Aspire 5520
iTunes 8.0.1.11
QuickTime 7.5.5
FairPlay 1.0.15
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.1.13
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number 25042FB61CBEED6A
Current user is not an administrator.
The current local date and time is 2008-10-04 17:29:33.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 7000M / nForce 610M
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {FB97CCED-8C3D-4788-9FD1-7EDF228EAD8D}
Description: Broadcom 802.11g Network Adapter
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Oct 04 17:05:55 2008
Lease Expires: Sun Oct 05 17:05:55 2008
DNS Servers: 192.168.1.1
192.168.1.1
Adapter Name: {4A66390C-37F1-4179-AF6D-56BE200D52CB}
Description: NVIDIA nForce Networking Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-09-26 09:39:17.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: NTIDrvr (1.0.0.6), GEARAspiWDM (2.0.7.5),
E: MATSHITA DVD-RAM UJ870QJ, Rev 1.00
Audio CD in drive.
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4900(0x00001324). It happened on drive E: MATSHITA DVD-RAM UJ870QJ on CDR media at speed 24X.
** iPod/iPhone Connectivity Tests **
iPodService 8.0.1.11 is currently running.
iTunesHelper 8.0.1.11 is currently running.
Apple Mobile Device service 2.11.32.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod nano (3rd Generation) running firmware version 1.1.3
Serial Number: 6U747640YXR

8.2.1 Not able to burn disc.

Since the most recent upgrade I'm unable to burn disc. I've done this before many times and have never had problems, nevertheless I followed these instructions after the first attempt failed http://support.apple.com/kb/HT2239
Nothing happens after step 16.
Prior to upgrade I could watch in the "Window Player" what song the system was burning, also the check marks would change to completed status. Now it just sits there with a "Player Window" that reads "Burning Disc ... finishing."
After 3 hours, I clicked the "x" in the window. It then gave a pop-up, "If you stop this disc burn, your disc will not be usable. Are you sure you want to stop?" I clicked yes.
Window reads "Canceling disc burn... this may take a minute or two" after displaying this for an hour, I had to complete a "Forced Quit" on Itunes, though itunes was responding.
I've gone thru this process three times, and all 3 disc are unusable with 0 tracks.
I'm trying to burn 15 songs I purchased today from Itunes with at total time of 1:08:04, 136MB min onto a CD-R 700MB/80MIN disc.
Anyone have a solution? Thanks.

I too am experiencing the same problems as mentioned above but I now am receiving a disc error message of "The attempt to burn a disc failed. The device failed to calibrate the laser power level for this media." This now happens whether I try to burn a Cd or try to back-up my purchases.
I have tried to burn a disc via finder first using a Itunes song file and second an Iphoto Jpeg. After both attempts I received this error code: 0x800Z006D I have not been able to find this error code.
Next I tried to put a DVD movie as well as an Apple install disc in my Superdrive. Both times the disc was spat out w/o reading. This also happens if I put in an audio CD. I've tried to install a laser lens cleaner, but this too was spat out.
Enter Utilities and clicked on Console and after I tried to load a DVD movie this message showed up in Console:
+2009-07-31 10:21:20.908 DiskImages UI Agent[252] Could not find image named 'background'.+
+Can't load ///usr/standalone/i386/boot.efi+
+Error while getting file ID of /System/Library/CoreServices/boot.efi. Ignoring...+
+Workaround Bonjour: Unknown error: 0+
I am now on 8.2.1(6) after having burn issues with 8.1
I am lost. Is this a hardware, program, driver issue?

Burn disc - 1970 creation date

I burn folders to discs from the menu ("Burn ABC to Disc"), which usually works fine except for one thing: the creation date on every single file is changed to 12/31/1969, which - not surprisingly - can show up as 1/1/1970 in the Terminal.
- The modification and acces times of the files on disc are correct.
- The original files have correct creation dates - seen both in the Finder and Terminal ("ls -lU").
Is there any way to burn discs that fixes this problem?
Thanks

The date is significant in Unix systems, is called "the epoch". You see, date and time are stored as an integer number counting the seconds that have elapsed since the 'start of time'. If the counter is set to zero, Unix thinks it has just been born, which is the first second of the first day of 1970: 1/1/1970, 0:0:1.
In your case, I have no idea why the creation date is reverted to that, while the modification and access dates are not. Perhaps someone else who has recently burned folders to disk can pipe in after checking the results, so we can pinpoint whether this is something isolated to your Mac or a a general Lion bug.

Default to second button on burned disc

Similar Messages

Maybe you are looking for