Default  Transport controls disappears when i use separate windows

The title is pretty clear. When i use separate windows for mixer and video, the transport controls disappears. (By the way, STP1 had a much better interface. Why one big closed window in STP 2?) How to have the transport controls back?

This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. To simplify the test case, you could create a simple drag-and-drop ADF application without JHeadstart and see if the same problem occurs there. Try to access the session variable in a custom data action similar to the way JhsDataAction does it when applying the query bind params.
If it reproduces, can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? Thanks.
Hope this helps,
Sandra Muller
JHeadstart Team
Oracle Consulting

Similar Messages

  • ActiveX controls disappear when VI is loaded in a Sub-Panel with Start Modal Dialog usage

    Hi,
    I have a subpanel in a VI (VI1) in which another VI (VI2) is loaded. VI1 is used as a module for an Action step in TestStand. VI2 has ActiveX controls like ExpressionEdit and Adobe PDF reader etc. VI1 loads VI2 in a sub-panel and calls Start Modal Dialog.vi. I have set 'Show front panel when called' to true for VI1 so that the VI pops up when the sequence is run. When the sequence runs and when the Start Modal Dialog VI is called from VI1, all ActiveX controls in VI2 (loaded in the sub-panel) disappears. Here is the screenshot of the frontpanel of VI1 when the sequence is run:
    This problem occurs in TestStand 4.2.1, TestStand 2010 and TestStand 2010 SP1 (as far as I have tested. May occur in older versions too). In the attached file, VI1 is 'ExprEdit Test.vi' and VI2 is 'SubpanelLoad.vi'. The attached sequence is developed in TestStand 2010 SP1.
    How can this issue be solved?
    Thank you,
    Ganesh Kumar
    Solved!
    Go to Solution.
    Attachments:
    Subpanel Load ExpressionEdit problem.zip ‏23 KB

    Hi,
    An update on this issue: I tried changing the order of loading the VI in the SubPanel and the start modal dialog. I called start modal dialog and then loaded the VI (VI2) in the SubPanel. When I ran the sequence, the activeX controls did not disappear (I was pretty sure that the ActiveX controls in VI2 would not disappear since I am calling Start Modal Dialog before loading the VI in the Subpanel). Then I just changed the sequence of operations back to the previous order (loading the Subpanel with the VI and then calling the Start Modal Dialog). When I ran the sequence, the activeX controls where still displayed. But when I ran the sequence with the VI1 backup (that I had taken before making all these modifications) the activeX controls were not displayed. I a nutshell, I now have 2 versions whose codes are the same. But when I run the sequence with action steps for these VIs, the activeX controls disappear when the unmodified backup VI runs and does not disappear when the modified VI is run. I have attached the files that I used along with the sequence file. The details are as follows:
    ExprEdit Test (Not Working).vi - The unmodified backup VI for which the ActiveX controls disappear.
    ExprEdit Test (Working).vi - The modified VIs in which the ActiveX Controls do not disappear (But same code as ExprEdit Test (Not Working).vi).
    ExpreEdit Test.seq - The sequence file containing 2 action steps one each for theabove mentioned VIs.
    SubpanelLoad.vi - The VI that contains activeX controls and is loaded in the SubPanel.
    Note that the sequence is created in TestStand 4.2.1.
    Thank you,
    Ganesh Kumar
    Attachments:
    Subpanel Load ExpressionEdit problem.zip ‏36 KB

  • Small black squares appear/disappear when I used the down key

    Small black squares appear/disappear when I used the down key-particulary when on FB, but also at other times

    No, there is no yellow star on any of the entries. Each entry has the site's (or company's) logo, as well as the name of the site and URL. There is nothing more in each entry.

  • Acrobat Pro Ver 9 for Win 7 the menu bar (File, Edit, View, Document etc) Disappears when I move the Window

    Lately in Acrobat Pro Ver 9 for Win 7 the menu bar (File, Edit, View, Document etc) disappears when I move the window . . only happens when I have a pdf file open . . everything worked fine until a few days ago . . F9 fixes the problem until I move the window again . . I realize my version is old so I tried tried downloading XI reader and having the same issue . . any help would be appreciated

    Hi Ernestprinter,
    Check if you have multiple Java versions installed on your computer.
    Try clean boot http://support.microsoft.com/kb/929135
    Also i would suggest uninstall security software and install it back.
    Currently you may use F9 key to restore Menu bar.
    Regards,
    Ajlan Huda.

  • Audio disappears when I use preloader

    I have a movie that has an audio track (I have it set to "start" for the Sync). It works perfectly, but when I insert a preloader with it, the audio disappears. The rest of the movie still works fine (visual) but it is silent.  Couldn't find exactly this problem in a thread. Any ideas?

    if you're using actionscript to instantiate your sound, use:
    var yoursound:Sound = new Sound(this);
    if you're using the timeline to instantiate your sound, make sure it's not set to export for use with actionscript.

  • Airport signal disappears when I use our cordless phone

    Hi. I am running an adelphia premiere high-speed DSL modem into an airport extreme base station, which provides a wireless signal to an i-book and powerbook. I am also running a line from the extreme base station to a Vonage unit, for internet telephone, from which I use a cordless panasonic phone (KX-TG2216). It's a new set-up as we have just moved house. And I'm finding that whenever I use the cordless phone my airport signal disappears (icon goes to grey), and sometimes I even lose my base station network in the popup menu (necessitating finding it again on airport setup assistant). They're just not there... But they come back when I terminate any use of the cordless handset. Is it a hardware compatibility issue? Do I need some kind of firmware patch?
    Any help gratefully received. Thanks!

    simonherb, Welcome to the discussion area!
    Your cordless phone uses the same 2.4 GHz that is used by the AirPort Extreme base station (AEBS). Therefore it is directly interfering with your wireless network.
    You may be able to configure the AEBS to use a channel that works OK even when the telephone is in use.
    A better solution is to get a cordless phone that does not operate at 2.4 GHz.

  • Photo Albums & Photos Disappear when publishing using ftp

    Hi,
    I am having trouble with both my iweb sites photos. There is two main problems:
    1. An album that appears normally in iweb is not visable on the published site
    2. An album will have random photos that are missing and replaced with a blank on the published site
    Some things I have tried:
    - I publish via ftp, so I tried publishing to a local folder - The albums and photos work normally
    - I tried republishing with a 3rd party cyperduck - same problem
    - I thought maybe it was therefore a ftp problem. So I logged in to my hostings file manager and check if the files are actually on the server -  but they are..
    - I tried republishing the entire site - same problem
    An example can be seen on the following - the third album is completely missing and if you go into the other albums, there will be random gaps where other photos are missing.
    http://www.gippmed.com/My_Albums/My_Albums.html
    Similar problem on this site, on the USA album, there is two photos missing towards the bottom:
    http://www.lukecainshooting.com/Luke_Cain/Photo_Gallery/Pages/USA.html
    Any help or suggestions would be greatly appreciated.
    Thank you

    Hi Cyclosaurus,
    Thank you for your reply. Sorry to bug you again but can I ask some further questions? Pls excuse my lack of knowledge on these things.
    In relation to your points:
    1) In the ftp publishing settings, public_html is acutal in where it says "site name", where it says "URL" I have http://www.gippmed.com. I was advised to put public_html in "site name" from my hosting. If I put anything else it publishes the entire site to a folder with that name on the server and is not viewable online?
    2) I have removed the spaces in the album page name and will reupload soon. In relation to the image file names, am I correct in saying that iweb is naming them from the captions? Do you really have to use one word captions or use underscores, it looks a little odd? I have read troubleshooting articles about iweb and spaces and it also recommends similar as you are, suggesting that all page names should have underscore instead of spaces. Problem is, if for example I change the page name "About Me" to "About_Me" iweb automatically changes it in the navigation menu and this looks silly to have undescores in the Nav Menu. Is there a way around this?
    Lastly, a new problem that I have never had before:
    Previously, iweb would remember what I had published and only publish new site changes. Now, every time I turn my computer off and on, I open iweb and it doesn't recognise any of the previous publishing, ie it republishes the entire site.
    Thank you again for your help

  • Why does an image in Preview disappear when I move the window from my laptop screen to my external monitor?

    I have an external 23" Cinema display connected to my MacBook Pro. When I open a file in Preview, moving it from either screen that it was originally on (laptop>LCD or LCD>laptop), the image disappears or "blanks". Only zooming in on the image will re-display it. Any ideas?

    Still investigating this problem.

  • Default profile not working when home directory on Windows server.

    Hi,
    Using 10.6.4.
    I have created a default profile (stored in /System/Library/User Template/English.lproj) and this works fine for new local users.
    If I bind to AD (Using UNC path from Active Directory to derive network home location) and login as an AD user for the first time the default profile is not applied.
    Has anyone experienced this problem?
    Thanks,
    Dom.

    I'm experiencing the same thing, and am wondering if you had any success?

  • The latest flash plugin 10.3.181.34 makes my mouse pointer disappear when pointer not moving (Windows Vista) - any thoughts?

    When I start firefox 6.0 beta, the mouse pointer disappears once firefox has initialized itself. If I move the mouse pointer, it reappears, then disappears again when it is at rest.
    If I disable the flash plugin, the mouse pointer behaves normally, i.e. it is always visible.

    Firefox 5.0 does the same thing as stated above.

  • Weblogic Server does not show managed server started when I used the Windows service to start it.

    I created a windows service to start a managed server and the services was created successfully and stated.  WHen I go to the Weblogic Server Admn console, the server is still showing shutdown.  Whenm I try to start it, it returns with error that the the service is not able to start.  Has anyone ran into anything similar.  I am running on Windows Server 2008R2 and running Weblogic Server 10.3.6 and Fusion Middleware 11.1.6.
    C

    Hi,
    For starting managed server as windows service there is no need of nodemanager .
    Please follow the steps given in the below doc:
    How to Install MS Windows Services For FMW 11g WebLogic Domain Admin and Managed Servers (Doc ID 1060058.1)
    Thanks,
    Sharmela

  • Why am I continually being asked my security question on my banking application when I use either Windows XP or Windows 7 and Firefox 3.6.13 but not on my Windows XP system with Firefox 3.6.3?

    I have three computers, two run Windows XP. One of the XP systems has Firefox 3.6.3 and the other has 3.6.13 installed. The banking application login acts normally with Firefox 3.6.3 but each banking login requires the security question answered with Firefox 3.6.13. This happens on both the Windows XP system using 3.6.13 and the Windows 7 system using 3.6.13. Testing Internet Explorer on all three computers does not show the same problem with the security question.
    I am unable to trace this starting with any particular Firefox update due to initially thinking the problem was with the banking website.
    The login webpage is https://you.usersonlnet.com/asp/USERS/Common/Login/NetLogin.asp

    I believe I've solved this issue by carrying out the following action:-
    First cancel all “send and receive” operations in OutLook. Next remove all emails from your "Outbox" (by either deleting them or moving them to the “Draft” folder). Next shutdown OutLook and then click on the “Start” button on the lower left-hand side of the Window’s taskbar, then click on “Run” now type in “regsvr32.exe inetcomm.dll” without the quotation marks, so it looks like this:
    regsvr32.exe inetcomm.dll
    Note the space between .exe and inetcomm.dll and hit “Enter” on the keyboard.
    The computer will execute the command. If all goes well in a few moments a dialog box will appear and state “dll registered successful
    I have not had it hand since ... cross fingers ;)

  • Touch pad controls disappeared after update for Bootcamp windows 7

    After updating Bootcamp for Windows 7 on my MacBook Pro 13" (Mid 2009), the touchpad lost its tap functionality and there, nolonger, is a touchpad tab in the Bootcamp Manager. Is there any way to reinstate the "tap to click" function?

    Thanks, but what do you mean by Windows Support Software? ... the Windows 7 drivers, Windows 7 OS, or Bootcamp for Windows 7 ?

  • When you use the Windows Media Sync to down load music from the PC to the Razr?

    What folder is the music stored in? I can see the music on my phone under My Music but I cannot see it on the V CAST Media Manager.

    It really depends on how you got the music on there in the first place.  Usually, I think, it goes into a music folder.  Also, make sure to check both the SD card and internal storage.

  • Cannot view transport controls

    For some reason I am unable to view my transport control bar, when it used to be visible. I think it may be a silly problem that I just cannot seem to fix, though I've tried adjusting the screen and everything I can think to help fix the problem. I simply cannot scroll down to the bottom of the screen to see the transport controls though when i minimize it on screen with the other applications showing it is obvious that the controls are at the bottom of the page. I just cannot access them when I have garage band pulled up. HELP!

    Wow - thank you!!! I had no clue that's what I needed to do, so now I feel slightly ridiculous. In any event, I appreciate it!

Maybe you are looking for