Default transport under Local change request

Dear Friends,
I am trying to transport objects from dev to QAS. i catch hold of the object, create transport request. By Default they are getting assigned to Local Change Requests instead of being assigned to Modifiable requests under target system. (in SE09)
how can i change the default from local change request to Quality.
Regards
Paddy

Thanks Edwin,
this is what i am doing now. But, by default i want it to be set in Quality--> Modifiable.
Everytime going to settings and changing it does not seem to be a permanent solution.
Request your earliest response.
Rgds.

Similar Messages

Released the Transport Request which is in Local Change Request

Hi,
Actually without knowing I have released transport requests which are under Local Change Request.Due to this they are not available for importing in Quality system.My Package is also there in one of those Requests.Now please guide me how to recover these requests.
Regards
Karthik

Hello Karthik
The easiest way should be to copy the object list of your local request to a new (transportable) workbench request.
However, the system might tell you that your objects can only be put into a local request.
In this case you need to find out why your objects are not (yet) transportable.
Usually there are two reasons for local request:
1.) The request does not have a target system -> check the request header and enter the correct target system (if possible)
2.) Your package has an inappropriate transport layer assigned -> change the transport layer
Regards
Uwe

Local change requests

Dear All,
One of transport request has ersides at
302-> Workbench -> Local change requests . --> When I release the Transport
request its didnot create a data and cofiles under /usr/sap/tans folder.
At the same time Transport request is resides at
302-> Workbench -> DMY Dummy->Released the request -> created the data and cofiles.
1. What is the Difference between Local change requests and DMY transport requests. ?
2. How to get the data and cofiles of transport request resides under Local change requests. is their any way to copy and create a new transport. If yes. How to copy and create a new transport request in sap R3 4.6C.?
Thanks
Malai

Dear Sharath,
Thank you for the detaild information.
I have mistakenly already released local transport request, Now status shows that released. And screen is not editable.
Hence I tried your second options.
Created the copy of "Local Change request" which I already released,
XXXK900206       XXXPADM       For Pmg Modification 20100531 Modification
     XXXPK900207   XXXPADM       Repair (Changed from Unclassified)
         Object list of request
         Comment: Object list included
         Report source
First I released the reference Transport Request. Its released fine, then When I release the transport request it prompt a small window
Object Checks
Not all objects in the request could be locked
Do you want to release them anyway?
Yes or Error or Cancel is available.
I clicked the error button. found that below message on the screen.
Object LIMU REPS ZFFF0020:
Only edit objects from development class ZPF001 in local requests
Object LIMU REPS ZFFF0320:
nly edit objects from development class ZPF001 in local requests
Object LIMU REPS ZFFF0380:
_When I click Icon which resides above error , it prompt me the below window_
Only edit objects from development class ZPN001 in local requests
Message no. TK 332
Diagnosis
Objects in development class ZPN001 cannot be edited in transportable Workbench requests in the current system FNP. The transport routes are configured such that objects from development class ZPN001 can only be edited in local Workbench requests.
System Response
The function terminates.
Procedure
You have the following options:
If you want to transport objects in development class ZPN001 into the target TS1 once only, without changing the configuration of the transport routes, then create a transport of copies in the extended view of the Transport Organizer (Transaction SE01). Go to the request overview and choose Request/task -> Object list -> Include objects to include your objects in this transport of copies.
If you would like objects in development class ZPN001 to be transported generally into the target system TS1, contact your transport administrator. In this case, the configuration of the transport routes must be corrected in the Transport Management System (TMS). For details, see the documentation on the Transport Management System.
PLease let me know how to procedd?.
Thanks
Malai

Transporting local change request

Hi all,
I had updated an include (MV50AFZ1 - SAP standard one - used access key to change this) to copy STO header and item texts to delivery when delivey documnet was created. This was created as a local change request. My basis guy tells me that this request cannot be transported.
Kindly let me know how this can be done.

Hi,
Go in that include and change it once thenit will ask for the package name to save , then save it in a package so that a new request will be created.
If it is not happening..
Then in the menu of ur include <b>goto->object directory entry</b> change the $tmp to new package,
then it will ask for the request...
or
else the best way is to delete the old local request.. then if u save it, it will automatically ask for the package and then u can able to create a requset...
Cheers,
Simha.

Changing from local change requests to transportable

Hi gurus
i have a system that has transport system set to Local change Requests and would like to transport them into another system .The transports have been released .what is the quickest way to change this without redoing the transports?
Any ideas are welcome

Hi,
did you configure STMS and transport route?
if yes then process as follows.
create new workbench request using SE10
SE10 -> create -> workbench request ->
give the description and target system SID.
select the request and click on include object ( ctrl + F11) check object list from request and enter you local transport request number. -> enter
release the new request and import it in target system.
regards,
kaushal

Local Change Request created in PRODUCTION needs to be moved to SANDBOX

I need to transport a request from Production (BWP) to a sandbox system (BS1), but when I create the transport it is created as a Local Change Request. How can I change it to a transportable request? I've checked the development class and it is correct. The package is ZBW and the transport layer is ZBD1. Please help.

Adding further to Santosh's suggestion....
Creating the transport of copies is the easiest option..if this is a one time activity...
Once the the objects are included from the Local change request to the transport of copies...release this...
Then move the tranport files at the OS level to the import queue of the Sandbox system....then in STMS of the SANDBOX..attach these file to the queue and then import it....
Thanks.

Local change requests being created for changing package info

Hi experts,
After a client copy of object into a new server whenever changes are being made to these objects local change requests are being created. i found that the above behaviour is because of the transport layer in the package, which was also copied during client copy, is of the old server. And when that was change to the one available in the new server the change to the package also got created as local change request. Now I wan this package to get transported to quality from development ( where the change was made). Please help.

Hi,
Thank you for your suggestion. I Created a Tp copy and included the local change requests in them and gave target system as quality system. There were 2 requests as local change requests, only one of them took the intended change in the quality but for the other the change made in the development system was not refelecting in the quality system.

Two tasks under one change request

hi all,
when two tasks will be created under one change request, when using same user id.
is there any harm having different tasks under one change request?
is it better to have different change request for different tasks...
Thx in Advance....

Hi
There is no problem to use like taht.
you can create any number of tasks of diffrent users or same user under same Transport Request.
it won't create any problem also.
you need to transport those tasks with that Transport request.
individuval taska won't be transported.

Tansportable request change to local change request by mistake

Hi,
I have a standard 3 system TMS, DEV,QAS, PRD
I delete the virtual QAS and active the transport route by mistake, and all the transport able request changed to local change request...
and now I have configured the TMS in the right way.
and can create the transportable request.
How can I move the old requests back?
From local chang request to transportable request?
Many thanks.
BR,
Randy

Hi ,
I remeber doing something like this.
SE01--> Create a transport of copies request --->create new request ---> then to the new requset ---> go to the Request/task (menu item) -
> other request (here we can choose which transport we want to include in this new TR) .
I am not really sure why we choosed like Transport of copies and why not others.etc.
Even I need to read more about this.I remembered that this worked for us.
Hope this helps you too .
Thanks.

Need to change the local change request to development class for Process Ch

Hello ,
I have created a Tranport request for Process chain but its saved as local change request .
Please suggest how to change that .
Thanks ,
Rahul

Hi
1.First delete the request which you collected the process chain as local object becuase you will not able to collect the process chian again.
2. Goto Tranport connector to collect the process chain again.
3. Select grouping option as necessary objects.
4. Drag and drop the process chain to the right hand side
5. After collecting the process chain, click on the package icon and give the package created for development class.
6. The system will ask for Transport request and save the PC in the Transport Request.
Hope it helps.
Regards
Sadeesh

Logon screen during transport of a change request

Hi Gurus,
When I have do a transport of a change request from our development system to our quality system some users get a logon screen and some users not.
I think it's because of some authorization.
Can anybody tell me which role I need ??
GJ

Hi
some users have permission to import transports (Auth object S_CTS_ADMI) in the target client.
If another user has no authorization, charm tries to import via client 000 -> logon screen appears if current user has no permission to logon via trusted rfc to client 000
Another possibility is to give user TMSADM the authorization to import in client 000. So all users can import.
regards andy

Local change request

hi
i released local change request in my development server .but it is not showing request number in queue any another place. i want that local change request released request in quality server queue
is there a way to modification in released request .
any possible to the released request get back to original place.
pls give me solution

Local change request will not create any request files (data/cofiles), you can create another request manually and add the object of the local request. SE09 --> create request --> select type of request (customization or workbench) --> type des and create new request.
expand the newly created request and select include objects --> and the appropriate request.
alternative is do minor changes in the program and it will popup you for new changes reuqest.
cheers,
-Sunil

Transport for local workbench request

Hi guys,
i have a package which I modified and want to save to a transport, but a dialog is prompted for local workbench request. Actually I am wondering why this package is local object. Because in local object I didn't see this object.
Can somebody give me some hint?
Thanks in advance
Regards,
Liying

A local object is something which non-transportable. You should change the Object directory entry of the objects to a transportable package so that the system will automatically prompt you for tr. request number.
regards,
Ravi
Note - Please mark all the helpful answers

Release local change request

Dear all,
I would like to back up some of my change requests. But when release them, they are not available in transport directory of this system. Do you know how to resolve this problem ?
Thank you very much,
Sylvecat

Hi,
Go to SE10.
Select the released Check Button
You will get it.
Regards
Sandipan

How to transfer local workbench request to production server

Hi,
All my workbench requests are saved under local change request node instead of being in the production system node. How to release and transport these requests to the production server.
Kindly help.
Regards,
Sriram

Hi Sriram,
In SE01 check whether u have given value for target system or not.
Target system is ur production system .Check whether u have specified it in SE01 for ur transport request.
If u have not specified target system for ur Transport request it will be shown in Local Workbench request
Regards,
lakshman.
Edited by: Lakshman N on Aug 4, 2009 9:31 AM

Default transport under Local change request

Similar Messages

Maybe you are looking for