Default type too faint and small
After I upgraded to the latest version of the Firefox the print on most sites I visit became virtually unreadable because the text is so faint. In same cases I have to block the text to be able to read it. It became impossible to use the "Reply" or Compose" in gmail (online) because the default type-size is so small and faint (grey? or light?). I literally have to go to a notepad to compose my message, then block and copy, and finally paste it into the reply window. I played with default colors, etc but nothing seems to fix it. I even used the classic-theme restorer add-on and still no improvement...
Anybody else have this problem? What is the solution?
Hello,
First, you have a possible Trovi infection, at least from what I have seen in your "browser.newtab.url" setting. Please visit:
* http://malwaretips.com/blogs/trovi-removal/
If you have already removed it from Firefox, then ignore everything I posted above.
Can you look into your font settings for:
* Tools (or [[Image: New Fx Menu]]) > Options > Content
And make sure that the colors are set appropriately? You can also click "Advanced" and try some of the options there, make sure that you change the settings for "Western" if you want to use custom settings (unless you browse sites of different languages and want to change those too) - be sure to uncheck "Allow pages to choose their own fonts, instead of my selections above" if you want.
Please see [[Change the fonts and colors websites use]] for more information.
Similar Messages
-
Photoshop CS3 can't do lowercase type-only large and small caps
Photoshop CS3, G5 PowerMac Dual 2GHz w/ 7GB RAM
A weird Photoshop problem: using the type tool, I can only produce type in large-and-small-caps, as opposed to upper and lower case. I can't generate any lowercase text. I've tried all the usual diagnostic tools: trashing the prefs seemed to work at first, but it's destructive of other stuff I don't want to lose, and anyway the problem came back after a while. I tried the Phantom User, and learned that the problem is tied to my User Identity, i.e., the problem doesn't exist in other User identities, but how do I make use of that information? I considered migrating to a new user identity, but I would have to go through every single appliciation, blah blah blah. So: does anybody have a quick, elegant solution to this, or is this a problem that has suddenly cropped up elsewhere? I'm not crippled by it, thanks to Illustrator CS3, but it's a convenience that I miss. And how do I trash the PS prefs without losing my brush tool presets?Birck,<br />>trashing the prefs seemed to work at first, but it's destructive of other stuff I don't want to lose,<br /><br />What "destruction" are you talking about?<br />>and anyway the problem came back after a while.<br /><br />I assume this happens with fonts other than those (such as Trajan Std) that were designed with just caps and small caps. It sounds like it may be a duplicate or corrupted font issue. Did you use a good font manager to check for duplicate or corrupted fonts? Did you clear font caches (with Cocktail)?<br />> tried the Phantom User,<br /><br />I see a black mask, cape and scary organ music here. <g> If logging in as a new user clears the problem, you may have a corrupted user identity and should stop using it.<br /><br />Neil
-
The punctuation symbols are very faint and small when I type them versus the size of the letters. How do I fix this?
Change another font try. if you just want use that font, I think you should recreate the font.
-
The font for sign into my yahoo mail is so small that I am unable to make out my ID and password and when I do get into my mailbox, the fonts are far too big and the words overlap. Tried going into tools /options to make changes but not successful, please help.thanks
Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting "none" as a high value can cause such issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/ -
I need to remove the default Firefox bookmarks.
There are way too many and none of which are usefull to me.
Also, I am vision impaired and reading through such a long list is very eye-fatigueing to me.
I would like to make my old IE Favorites folder the default. How can I do this?Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
For the annoying start-up message:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder. -
I am sending a single-page poster in Illustrator to a commercial printer. There are several placed graphics and I want to choose the correct file-type to keep my Illustrator file nice and small.
Printers like PDFs, but you should consult with the print vendor before you save the file in any particular format. Each vendor is different and have an established workflow. They may not accept JPGs. If the poster prints offset, you will need to supply the appropriate resolution per their request or what they require. If the poster is large format or grand format, then they will or should know what resolution is appropriate. However, large format inkjet only requires 144-150ppi at 100% final size. Try to get in the habit of consulting with the print vendor early on so you end up supplying what is needed.
-
Please Help! For some reason when ever I type in PSE 10 it comes out very faint and almost invisable like. I'm not sure what I did but I cant get it back to the normal black font??? Please help. I know this seems like a very simple and easy question. I could use any advise. I've tried everything.
Further to what dominic said, in PSE 11 and 12, you get to Reset Tool by clicking the four-lined square on the upper right of the Tool Options area. In older versions, click the tiny triangle or tool icon at the far left of the Options Bar.
-
Do not like updated ICal because the day and times are too faint to be read.
Since update of ICal, the numbers (day of month and time of day) are too faint to be read. Can this be fixed?
There are no setting to change that right now. You may try to increase the contrast of your display while working with iCal
System Preferences -> Universal Access -> Seeing
in the Display section adjust the "Contrast" slider. -
Is there a way to have the use of what we used to call "Macros" which would be a key you could hit where you have installed a word, phrase, etc that you type repeatedly? By this I mean if, while on line, you repeatedly type out the phrase "Thank you very much for your attention to this matter"....you could hit a key (like maybe F5 or something similar) that would automatically type this phrase out so you don't have to type it over and over and over again.
You can also look at Clippings.
*Clippings: https://addons.mozilla.org/firefox/addon/clippings/ -
CRMD_ORDER: how to set default values for Requester and Change Manager
Hello Folks,
how do I set default values in TA crmd_order?
I drew my organizational hierarchy using TAs bp and ppoma_crm.
When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer) to be set automatically, not manually.
Both Requester (= Key User) and Change Manager are derivable. I did not find anything in SPRO neither in the OSS neither here.
Points will be rewarded as a matter of course!
Thanx in advance!Hi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason -
Types of buffering and difference between them
hi experts,
Types of bufferings and difference.
Thanks.Hi,
Buffering
The major difference between the context buffer and the normal database and table buffers is that it is only refreshed at given intervals. There is no attempt to update it synchronously, or even nearly synchronously. This means that it is not appropriate to use it for every context or context module.
Buffering Types
Permanent (P): This is the default setting. In this case, the data is kept on each application server beyond the end of the transaction in which it is used. The buffer is reset every hour on the hour (8:00, 9:00...). You can reset the buffer manually in the Context Builder.
Temporary (T): Data is only buffered for the duration of the current transaction.
No buffering (N)
Buffer Size
You can set the maximum number of entries to be buffered. The default is 128. This number only applies to the permanent buffer for a single module. Within a transaction, all of the data that occurs is stored in the buffer unless you have switched off buffering for the module. It is usually best to leave the maximum buffer size set to 128. It is not often that a large number of key combinations occur within one hour on a single application server. Even if this does occur, you can expect combiniations from the first 128 entries to be repeated. The system resets the buffer after one hour, which should ensure that no one module monpolizes it.
Buffering Types
An I buffer is a table that assigns derived values to the input fields of the module. It
Only contains one entry with key values.
An E buffer is a table that assigns the derived values of the module tot he key fields of the context, It
contains more than one entry with key values.
can be a join of all I buffers for the modules buffered
Performance
The E buffer gives the fastest access, since it can find the values requested in the DEMAND statement in a single step. Under certain circumstances, it can return a smaller number of hits than the I buffer.
<b>http://help.sap.com/saphelp_nw04/helpdata/en/9f/db966035c111d1829f0000e829fbfe/frameset.htm
http://sap.niraj.tripod.com/id19.html
http://www.planetsap.com/Userexit_List.htm
http://www.allsaplinks.com/material.html
http://www.sap-img.com/abap-function.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822
SLDB-To find out the logical database details
http://de.geocities.com/rafaelreichle/abapkeywords.html
STMS-Transport Management System
http://www.kabai.com/abaps/q.htm
http://www.skytechnologies.com.au/default_files/job_scheduling.htm
PZ04-TIME STATEMENT
http://www.sapdevelopment.co.uk/fmodules/fmsfield.htm
http://help.sap.com/saphelp_nw04/helpdata/en/59/cd7daa07d711d5b66f006094192fe3/content.htm
http://www.sapfriends.com/sapstuff.html</b>
<b>***Reward Points if Useful</b>
Regards
Gokul -
Default values for iBase and component in CRMD_ORDER
Dear developers,
is there a possibility to set the input fields for iBase and component in the transaction CRMD_ORDER on a userspecified default value? The Parameter-ID's IBC and IIB that are saved with the SAP-User doesn't work
Is the a known solution?
Thanks in advance,
Jens SperkHi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason -
Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanksThose are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
Define event types in Customizing and restart the transaction.
how to define event to restart the transaction in BADI
I have given error message in badi. it is giving
No SAP Event Management communication for events; no event types def
Message no. /SAPTRX/ASC084
Diagnosis
You have not defined event types for the business process types.
therefore not possible to communicate event data to SAP Event
Management.
System response
The communication of event data is aborted.
Procedure
Define event types in Customizing and restart the transaction.Hi Kevin,
What DataSource does your testalias refer to?
- If it is a custom DataSource, you must have created this custom DataSource also.
- If it is the default DataSource, you shouldn't have this problem in general...
In either case, you can try deploying your DataSource and/or DataSource alias together with your application:
http://help.sap.com/saphelp_nwce10/helpdata/en/45/07d2eeea3e0485e10000000a155369/frameset.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/45/c82cd460a42e96e10000000a155369/frameset.htm
I hope that helps!
Regards,
Yordan -
How can I change a PDF document to have an enlarged text area and smaller margins?
I've just been reading a long discussion initiated by a guy who wanted to recompose a PDF file to print in fewer pages. I'm not asking about that. I'm aware that Acrobat Pro 9 will not recompose the pages of a pdf for you; as someone said, it's not a word processing program. I want to copy a PDF to a new file with an enlarged text area and smaller margins, so I can read it more easily. My eyesight isn't so great.
I'm trying to print a decision of the US Supreme Court, for my study. The problem is that these PDF files of such decisions are composed in 10-point type with generous margins, in folio-size pages smaller than 8 1/2 x 11". When you open PDF files of these decisions, you get extremely wide margins and relatively small type. Essentially, I'd like to re-rasterize the document so it prints on my 8 1/2 x 11" paper in a larger apparent type size, but in the same high resolution as the original. By the way, the decision I'm working on is almost 200 pages long, so I don't want to do this, obviously, in a page by page manner.
I guess I could do this in Photoshop, by blowing pages up and cropping them. Photoshop does a good job of eliminating the jaggies when you do this. But it would seem better to re-rasterize the pages from the PDF source file. So would any reader be kind enough to explain this process to me? (I'm fairly savvy in Photoshop, Illustrator, and computer printer concepts, but a complete newb in Acrobat.)If you just want this for printing, one thing you can easily do is crop all of the pages to remove the margins. For example, you can rop 2" off the left and right sides, and 1.5" off the top and bottom. Then print using a Page Scaling of "Fit to Printable Area".
To crop in Acrobat 9, select: Document > Crop Pages
be sure to select All for the Page Range.
Maybe you are looking for
-
Voicemail list was erased in iOS7. Any way to get this back???
I have an iPhone 4s and just recently (like everyone else) updated to iOS7. The only problem I've had is after the upgrade, my voicemail list was completely gone. In iOS6, there was a list of voicemails you had saved. It isn't just that the indiv
-
Opening the Canvas window and the Timeline from the browser
I am on an Intel 2x2.66 Dual Core using OS 10.4.11 and working in FCP 6.04. I know this is a stupid question but having been a composer all my life, I am not up to speed on FCP and I seem to be unable to find the answer in my manual. I dragged a Quic
-
Upgrade from Solaris 8 to Solaris 10
What are the points to take care of when migrating the system from Sun Solaris v 8 to Sun Solaris v 10? Any help would be greatly appreciated.
-
hi all, i am cheenangshuk das working on a standard ALV report. i need to insert some new column in that report and populate that column with some general cutomer data like customer house num / street address ,building code, telephone no. Can any on
-
We installed the new version of the installation from Market Place which is Ep 6, SP 2 Patch 4 Hotfix 1 on a Windows 2000 with Oracle . The problem we have now, is when we try to apply hotfix 5,6 for patch 4. When we apply the hot fix from sapinst we