Default userid password

hi guise.
when i run oracle designer it's ask me user id / password...
i dont's know the userid password can u plz help me..

When the repository was installed, it was installed under a repository owner which is an Oracle user in the repository's database. The repository owner in turn can use the Repository Administration tools to grant access to other Oracle users in the same database. These are given various levels of access, one of which allows them to create new containers using the Repository Object Navigator. They can then grant access to their containers to other users.
So you must go to your database administrator for the database containing your repository and ask for a username and password, then to the repository administrator and ask for that username to be granted access to the repository, and finally to the owners of any containers to which you need access. Fortunately, these are often all the same person - maybe you?

Similar Messages

  • Default userid/password for Essbase 7.1.5

    Hi All,<BR> <BR>I've just now upgraded to Essbase 7.1.5. At the time of installation I gave the 'NAME' as 'James Galt' and system password as 'password'.<BR>Earlier on every upgrade it used to recognize the old security file and I could login to a fresh upgrade using my old id/password. But this time it does seem to recognize the essbase.sec file.<BR><BR>could somebody please let me know the default user-id password for version 7.1.5, so that I can atleast login and try creating some users.<BR><BR>Any help in this matter s highly appreciated.<BR><BR>Thanks in advance,<BR>[email protected]

    There's no such ting as a default user ID and password for Essbase. The system user ID and password is the one you create when you install Essbase. IF you want to reset and start from scratch, delete the essbase.sec file and launch essbase.exe from \essbase\bin. You will be prompted to enter a new user ID and password. Hint : it's not good practive to use someone's name as the system ID. BE aware of a couple of things if you do this, any users, filters, applications, etc you had we'll be gone and have to be re-created. If this was an upgrade from the previous version, upon install completion, you would run the essbase.exe and it would prompt you for the existing password. If it's not working, chances are you are using the wrong password. Remember, the system password might not be the same as the admin password. For instance at my location, when I did the upgrade I entered the admin password and it didn't work. I asked everyone and they said that was the only password. After digging little deeper I found that a couple of years ago it was determined the passwords were too generic so they changed them. While they changed the admin password, the system password stayed the same. After digging, I found out what the old password was and sure enough I was able to fire it up. If you don't have existing apps and users to worry about then just start fresh, but if you want to salvage what you had, then you will need to find the right password. One more thing, if you have Essbase running as a service, disable the service and run it in console mode until you get this straightened out. <BR><BR>HTH

  • What is default UserID/Password for Oracle 11g

    Hello experts,
    I’m new to Oracle and installed 11g first time on Windows. Installation has finished successfully. It gave me the link on open my database.
    Enterprise Manager Database Control URL - (orcl) :
    https://192.168.2.25:1158/em
    when I open it it ask for user id and password. I don’t know what is my userid is. Can anybody help me with this issue.
    Thanks a lot in advance.
    Edited by: user10791378 on Aug 16, 2009 1:36 PM

    >
    I’m new to Oracle and installed 11g first time on Windows. Installation has finished successfully. It gave me the link on open my database.
    Enterprise Manager Database Control URL - (orcl) :
    https://192.168.2.25:1158/em
    when I open it it ask for user id and password. I don’t know what is my userid is. Can anybody help me with this issue.
    >
    You can log in to the Enterprise Manager Database Control with any DBA user. Typically, you should be able to logon as sys or as system. The passwords for these two users where specified by you during the install of the database.
    If you can't remember them, you should be able to change them on the command line after a connect as sysdba there.
    Kind regards
    Uwe
    http://uhesse.wordpress.com

  • What are the default userid and password to logon to Oracle Applications

    What are the default userids and passwords to logon to Oracle Applications Manager?

    There r no any default password for Application Manager,
    However userID is applmgr and if I have to create a password for applmgr I would do that as welcome or welcome1 so the applmgr user can change it when he/she log on first time as needed.

  • What are the userid,password, and host name for oracle 9i?

    HI Guys.
    I am a research student at the University and the I recently downloaded Oracle 9i for my research. But the problems is also with seting it up. Please could you show me the userid, password, and host name for oracle 9i.
    Thanks in advance for your cooperations.
    Malinga R
    [email protected]

    I believe that starting with 9.2, you have to specify different passwords when you install (can't be the default).
    Justin

  • How can we hide userid & password from browser

    How can we hide the userid,password and connectionstring from the address bar of explorer when we run 9i forms on browser

    Ok - I have 9.0.4 and I want to disable this hiding of password, as I have the follwing problem: Forms creates a temporary local file which contains javascript. Per default in xp service pack 2 it is not allowed to run javascript from local file. Is there any parameter in webforms.cfg to disabel the creation of this temporary file?

  • Whatz Default UserID and Passwd for ODM and SSO

    Hi,
    I have installed oracle9i on win2k.After the installation,i tried to use the Oracle Directory Manager.
    I use the Default Userid "cn=orcladmin" and the Default passwd "welcome" to connect to OID server through oracle directory manager.
    It gives me an Bind Failure Error. I have the OID running on localhost on Non-SSL Port 389.
    Is there any other configuration that needs to be done to use ODM...or my default user name and password wrong when i connect for the first time..
    Secondly when i logon to the single sign on server(SSO) using the same credentials mentioned as above it throws an Authentication failed (WWC-41419) Error.
    My question is are my credntials wrong and if so what are the right ones or Is there some other configuration that needs to be done?
    pls help in this regard...without this i cant proceed.
    Thanx

    Thanx for the Reply...It worked.
    I have another question...Once i login to OID using ODM,the Entry Management Tree has no nodes(DIT) under it.
    Then wherez the cn=orclamdin entry stored ?
    There were no errors after the installation though...
    Do i need to run some scripts to create the default entries after the installation.?
    Thanx

  • Why have a default user password feauture?

    Hi,
      I (understood) read in the manual that there could be a default user password -
    28 BF 4E 5E 4E 75 8A 41 64 00 4E 56 FF FA 01 08
    2E 2E 00 B6 D0 68 3E 80 2F 0C A9 FE 64 53 69 7A.
    If the file is encrypted based one this key, readers can open the file without having to prompt for password though the file is encrypted. I want to know whats the point of this? It provides no security. All it ensures is the reader be sophisticated enough to have a security handler. I don't see the point. Is there any advantage of having such a pdf with default user password?.What was the motivation behind this?
    Thanks

    The Standard Security method of PDF supports TWO passwords - the user/open password and the owner/permissions password.  In addition, an encrypted PDF can have a set of rights (DRM) associated with it (eg. Don't print, don't copy, etc.)
    If you wish to control WHO can open the PDF, then you assign a user/open password.  If you wish to allow ANYONE to open the PDF, then you leave it as the default.
    Once the PDF is open (regardless of the open password), then the reader is responsible for respecting the DRM settings on the document.  However, if you are the owner of the PDF (and there is a permissions password), then you can get back FULL permissions by simply providing the owner password.
    Make sense now?

  • How to hide Dynamic Parameter userid/password prompts on infoview

    Hi,
    I want to hide Userid/password for each dynamic parameter, which gets prompts while refreshing or scheduling a report
    I do enter userid and password at CMC->database level but when report has dynamic parameter it still does prompts for each parameter.
    Please advise.
    Megha

    I tried what you suggested..
    Well I run into different error now while refreshing report suing dynamic prompt.
    Error says 'List of Values failure: fail to get values.[Cause of error:Failed to the connetion.ProductName]
    ProductName is my dynamic Parameter.
    Please advise.
    thanks
    Megha

  • Use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature?

    Dear all,
    I am looking to setup the use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature. We SSO to the backened ABAP AS via an SAP NW Portal to which SPNEgo kerberos authentication is setup. Today we specify R3 user id/password to digitally approvae a lot release. The idea is to have users maintain one AD password and don't have to remember the R/3 password anymore and also our Security team to avoid password maintenance.
    I know there are 3 options for digital signature and
    System signature with authorization by user ID and password (We use this currently)
    Digital User signature with verification - (We would like to use this with AD userid/password, so the system still ask the users their AD userid/password for the authentication when they try to "sign" a document.)
    User signature without verification
    Do you think there is a way to configure the system in order to ask and check the active directory userid/password instead of SAP R/3 password? Where can I found documentation about it ?
    I have several different versions of AS ABAP starting from NW 7.02 to NW 7.31.
    My active directory is based on Windows 2008.
    Thanks in advance!!
    Dhee

    Actually enabling Kerberos for SSO purposes and enabling Kerberos for digital signatures are two different topics although the latter is because of the former. I'm interested in the topic as well and I'm currently looking at different options. SAP provides a BAdI for the digital signature API which can be used for external authentication but they do not provide the solution to invoke Kerberos authentication based on username and password. SAP provides a semi solution with NWSSO 2.0 SP2 which works only on Windows with classic dynpros meaning SAP GUI for Windows is assumed. The solution is based on an ActiveX component which does the actual Kerberos authentication using the Secure Login Client which is part of the NWSSO suite. Extending that implementation to non-Windows and non-GUI applications would require some sort of web enabled service that could be used to authenticate the user with username and password. In case authentication is successful, a Kerberos token would be returned to SAP which would then be validated. All the required pieces are there since SAP has Kerberos support now in both stacks of the NetWeaver Application Server, some bits are still missing though which leaves customers looking at 3rd party or custom solutions.

  • Dynamic UserID/Password for file Adapter

    Hi,
    How to use dynamic UserId/Password for file adapter ?
    (Sender/Receiver)
    In our case the Id/Pwd of FTP Site changes freguently.
    Can anyone help.
    Thanks in Advance
    Regards
    Chemmanz

    Hi Chemmanz,
    >>>>In our case the Id/Pwd of FTP Site changes freguently.
    but do you have those passwords in the message payload?
    if not then you will still have to fill it somewhere right?
    BTW
    the only way would be to use java proxies and write a simple ftp adapter inside it (or your own adapter)
    but this is not possible in standard I believe
    Regards,
    michal

  • Convert a web service which has userid/password hard coded......

    Hi,
    We have created a web service in our ECC 5.0 abap system. In SICF we hardcoded the userid/password, the web service works fine and can be called successfully to read the required data from SAP.
    Now we wish to change the process so that the users calling the web service have to pass their userid/password, now things don't work!!
    How do we change things around to the new format?
    Options we are considering are as follows:
    1) Change the function module so that it has import parameters of userid and password (don't think this will work!)
    2) Somehow update the wsdl file so that it includes userid/password, is this possible?
    3) SICF/wsconfig/wsadmin config, but don't know what to do though!!
    Any ideas anyone?
    Thanks.

    > Now we wish to change the process so that the users calling the web service have to pass their userid/password
    1. Do you want to have authorize access to webservice or,
    2. do you want to user supply user/password as a parameter within service.
    for 1st you don't have to do anything just goto SOAMANAGER transaction and select basic http authentication for service endpoint. Every user who want to access (even url of wsdl) need to supply user/password.
    for 2nd option you can integrate user/password field in FM but you need to include code which check and confirm if they are valid credential.
    Regards,
    gourav

  • UserId/Password Not Given-expected to run SQL Plus

    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    I downloaded Oracle 9i and I'm trying to run SQL Plus and its asking me for a userid, password and a host string. I don't know what the userid, password or host string would be. I wanted to see how I like Oracle for a database and just wanted to enter some SQL.
    How will I know what the userid, password, host string would be?
    - Server name = none
    - Filename = none
    - Date/Time 2/8/02
    - Browser + Version = Internet Explorer
    - O/S + Version = Windows 20000
    - Error Msg = invalid userid/password

    could you please suggest what could be the reasonYou are running Oracle on an unsupported operating system (Vista Home premium). You either need to change the OS or use the package meant for Windows Vista.
    http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html

  • Userid/password in a popup dialog box?

    When I sign on to the forums today either on an iPhone or Firefox in windows, I'm getting a popup box to enter userid/password instead of the usual Oracle single sign on page.
    Is this something new?

    Seems to be a feature :-) Has happened many times before - it is typically corrected within a few hours
    Where's my handle?
    Handle not working
    HTH
    Srini

  • Anybody done USERID/PASSWORD authentication against aWindows NT Domain

    I think I'll have to write a C++ Program to the WinNT API to do it
    (LogonUser). Then I'll wrap it with a service object for authentication. Has
    it been done before? Or something similar? We want to validate users against
    a WindowsNT Server DOMAIN.
    -martin ([email protected])

    Hi Martin & All,
    Yes you are right, wrap the API in C++/C then write a PEX file for interface to Fort&eacute; and use the method to invoke the WinNT API authentication. Do not forget to validate the return values from the methods. They are very crucial in handling exceptions etc., in forte.
    I've done the same to provide the mail user authentication in MAPI API wrapper for Fort&eacute;.
    Is this what you looking for????
    Regards,
    Sivaram S Ghorakavi mailto:[email protected]
    International Business Corporation http://www.ibcweb.com/
    From: Martin G Nystrom
    Sent: Wednesday, November 26, 1997 1:53 PM
    To: [email protected]
    Subject: Anybody done USERID/PASSWORD authentication against a Windows NTDomain?
    I think I'll have to write a C++ Program to the WinNT API to do it
    (LogonUser). Then I'll wrap it with a service object for authentication. Has
    it been done before? Or something similar? We want to validate users against
    a WindowsNT Server DOMAIN.
    -martin ([email protected])

Maybe you are looking for