Default using other program to view source page of firefox

Could I set coda as the default program to open the source page for firefox 2.0.0.12.
Once I right click the "View Page Source", then Coda will open this html page.
Thanks a lot.

You could try searching for an extension on the firefox site: https://addons.mozilla.org/en-US/firefox/

Similar Messages

  • My MacBook pro 2012 Mountain Loin 8.2 don't clear the inactive memory automatically when memory needed for other program so I get page outs.

    My MacBook Pro 2012 Mountain Loin 8.2 doesn't clear the inactive memory automatically when memory needed for other program so I get page outs. There are much inactive memory when page outs. Why my mac does this?

    That's completely normal. If other programs require memory then the system will reallocate Inactive RAM as needed. Page Outs don't mean anything.
    About OS X Memory Management and Usage
    Reading system memory usage in Activity Monitor
    Memory Management in Mac OS X
    Performance Guidelines- Memory Management in Mac OS X
    A detailed look at memory usage in OS X
    Understanding top output in the Terminal
    The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
    Adding RAM only makes it possible to run more programs concurrently.  It doesn't speed up the computer nor make games run faster.  What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent.  It will improve the performance of applications that run mostly in RAM or when loading programs.

  • How do i download files using other downloader (like orbit downloader) instead of firefox downloader itself?

    how do i download files using other downloader (like orbit downloader) instead of firefox downloader itself?
    please give me detailed steps to do it
    i have orbit downloader

    I tried it again, and this time when I resumed it lost about 10Mbytes, so I guess this means that the app store downloader saves its data every 10MBytes.
    I will try downloading the whole thing again(XCode4) and just hope that this time I can get the whole download before it decides to wipe out what it has already downloaded.

  • Viewing multiple pages in Firefox

    I often open multiple pages such as two or three and want one on top the other below but if I click minimize they all get hide.
    How could I view multiple pages?
    Please someone reply and oblige.
    Thank you

    Hi,
    Thank you for links, few hours ago I tried some of the add-ons but did not sort it out therefore, deleted.
    I appreciate your help.

  • How can I use other endnote bibliography formats in Pages '13?

    It's really stupid program. In my uni, we use our own reference style, and I'm using endnote X7. I have used whole time today to change endnote format in pages'13. But, I could note change. the bibliography formats are fix to some popular referencing style. it's really rubbish program to uni studnets. I have wasted 1 day. do you have any ideas?

    yep I tried everything what I can do.
    I have iwork '09. so, I uninstall iWork'13 and reinstalled iWork '09. but, iWork '09 is not working on Maverick.
    So, I have checked any update for iWork '09, but Apple does not support uptating for iWork'09. only ungrading to iWork'13 is possible.
    Endnote and pages both companies, they don't have any soultion for this problem.
    (even though I installed 2.0 endnotepages plug in, still I cannot change bibliography format).
    So, I'm gonna back to Ms-word. Pages'13 is not ready for uni students.
    Pages is just another notepad app for IOS. it's not for Mac user.

  • Need to Use google APIs in View .htm Page

    Hi Experts,
    I have the following requirements:
    I need to capture the Geo code based on the user click from Google maps and update the same in the CRM.
    I need to load the Google maps with multiple Location Marking and Marking Icons will be changing based on some condition.
    I had implemented the Mash-ups to Load Google Maps in the WEB UI screen.
    I found that Mash-ups will be helpful only to load the web Page Via URL(parameters passing) and it will not return back any info.
    So i  created a custom view and write the Java Script logic which contain the Google APIs,functions to load the Maps dynamically with
    multiple Geocodes Etc., How ever while am loading the view in the CRM am not able to load the maps.
    So I create a Page with Flow Logic in the same BSP Component and i provide the same code which i given in View's .htm page,while testing its working fine.
    Q1 > Using Mashups in CRM can use the Google APIS and can we raise events on click on the Maps?
    Q2>  Why Java Scripts contain Google APIS are not loading in the View's .htm page like Pages with flow Logic.
    Q3>  How can i Load the Page with flow Logic in the View's .htm page with out using Iframe?
    Any Suggestion will be helpful.
    Thanks and Regards,
    Y. Ravi Kumar.

    Hi,
    I just wanted to post some of my experience on java.nio.channels.FileLock.
    If a file is in use by an application, for example if a jar file is launched, the file is obviously locked by the system in a way we can't delete it.
    However it is still considered as unlocked by java as an exclusive FileLock could be set.
    If an exclusive FileLock has been set on a file no other exclusive FileLock could be set by any other application. (relieved ! the basic lock operation works !)
    When a FileLock is set on a jar file it DEFINITELY corrupt the considered jar !!!!!
    the message "Invalid or corrupt jarfile" is displayed when I try to execute it using java
    and any zip utility can't open it any more.
    And it is not a locking problem !
    Even after the exit of the application that lock the file, release of the lock, copy of the considered jar, the jarfile is definitely corrupted.
    I guess it could/should be the same thing on other file types.
    What an awful bug :(
    My config is Windows Vista sp1
    java version "1.6.0_05"
    Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
    Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode, sharing)
    Considering the question "if I then use a FileLock and lock my file, can I still delete it?"
    The answer is no you can't delete it:
    You can't delete it with the application that locked it
    (not even with File.deleteOnExit() method -- still with the above config --)
    neither with another application.
    Of course you can release the lock and delete it ...

  • HT4059 Using my iPad 1, viewing a page from a book purchased through iBooks, want to print a page.  Does anyone know how??

    I'm using my iPad 1 and wanting to print a page from a book that I purchased from iBooks.  I can't figure out how to print.  Any suqqetions? Thanks.

    Sorry, but you can't.
    Regards.

  • So then - do most people use other programs to edit thier photos?

    After hours of reading on this discussion forum - which is incredibly informative and useful - and others, it seem that a lot of people use Aperture for its management abilities (I know, DAM) and not as much for its editing abilities. (Perhaps its intended function?) Is this accurate? Is it intended to be a compliment to <insert you favoite photo editor title here> rather than a replacement?
    It seems to be far too powerful an editing tool to simply use to structure my files - but send them out to an editing program when I want to edit.
    Again, I am a newbie and am probably missing something, but as an example using the sharpen edge tool I cannot seem to apply much sharpening at all even maxing the sliders. In PS (I am not trying to cause I debate, it just happens to be the program I have been using to this point) you can easily sharpen, over sharpen and completely distort the image beyond useful with tiny adjustments in the parameters. I have about a half a dozen presets as baselines in unsharp mask (normal, reduce haze, portraits etc) that I start with and change slightly per photo. I wanted to create the same structure in Aperture, but it does not seem to have this ability - which I find strange because just about everything else I do in Aperture seems to have abilites way beyond my own and I find I am having difficulties with simple things, such as adjusting light levels.
    Any thoughts?
    As always, many thanks.

    As has been noted by those wiser and better than I, "take the picture right, then you don't have to muck with it in the darkroom." There is, of course, a lot of truth in this but the digital image is another beast compared to film. I suspect that I handle about 90%+ of my images directly in Aperture. I have a number of plug ins (SilverFX, Vevezia, Photomatix HDR, and Noise Ninja) and I link to an external editor. Most of what needs correcting, improving, focusing, etc., can be done within Aperture particularly now that the plug ins are 64 bit. Still, I have a full copy of Photoshop (actually CS5) as there are things that can be done in PS that I don't know how to do any where else. (There are also hundreds of things that PS can do that I haven't learned!)
    So the answer to your question: depends on how deep you like to get into the image. I liked the dark room in the old days (dating myself here) so I have found the amazing power of a program like PS to be irresistible. YMMV.
    Robert
    A few years back I was able to get Adobe to switch me to the Mac version of CS2 by paying the upgrade fee difference. Won't hurt to ask. There was a bit of song and dance routine (faxes and stuff to prove I had the Win version) but it worked out. Worth a try but recommend you learn Aperture and its available plug ins first.

  • Can't use right click to view source code of photos

    In Windows I can right click my mouse to view the source code of a posted photo. However, I don't see this capability in the iMac. Am I wrong and, if so, how to do it?

    It actually works with Photoshop but not with Flash Pro.

  • Music breaks up while using other programs

    I recently downloaded the latest update for itunes and started listening to my music like I always do but when I started using the internet (scrolling down a website to be precise) the music broke up and sounded more like static than music. It also happened when I enlarged the size of a blank "canvas" of a drawing program. Then after a while the coarse static sound stays, even if I restart the itunes program. It has never done this before and I was wondering if re-downloading and re-installing the latest itunes was a) possible and b) a plausible solution. And if not, what would be?
    I was looking for the itunes support email for direct help. Couldn't find it, suspect there isn't one. Is there one?
    Dell dimension   Windows XP  
    Dell dimension   Windows XP  

    There's some suggestions in this thread about about how this can be worked around.
    I haven't tried it because (and I still can't quite believe it) after switching the player into Mini mode - Advanced>Switch to Mini player - it stopped happening. Even if I go back to full screen mode now it seems fine.
    Weird. Hope somebody else finds the same thing. I haven't tried rebooting or anything yet, so it might come back. No more time to spend on it - I've got work to do!
    PC AMD   Windows XP  

  • FYI using other programs to input video like after effects

    Like using after effects or motion or what have you. Export the video as a mov in the codec of Photo jpeg. It plays back in imovie perfectly Compeki!

    Update:-
    I restarted my computer and it appears these programs work now.
    I should not have needed to do that, however it cleared the problem.
    Sorry for the alarm.
    james.

  • Using other program with Discoverer

    Hi,
    I would like to know if it's possible to read a worksheet or a Word document from Discoverer.
    The idea is to load data from an Excel or Word Document instead of from database tables. This document would have a predeterminated format made by us.
    Is that possible? I didn't find any option to do this in Discoverer Administrator.
    Thanks.

    Hi
    Discoverer cannot read the data that is contained within a Word or Excel document. However, Discoverer can call Word or Excel to display such a document.
    To do this follow this workflow:
    1. Store the Word or Excel document somewhere central where Discoverer can get at it
    2. Create a new VARCHAR2 database column in a table and make the length sufficient to hold the full path and document name
    3. Edit the table and add the Word and Excel document links
    4. Using Discoverer Admin, load the table or refresh an existing table so as to make this new column available
    5. Locate the new item and right click on it
    6. From the popup menu select Properties
    7. Look for the property called Content Type and change this from <None> to FILE
    8. Exit the Admin edition and create a new workbook in one of the end user versions to use this new item
    9. You should see Discoverer display the Excel or Word icon in the column and when you click on the item Discoveer will launch the relevant application and open the document
    This has its uses when dealing with customers in that you could store contract information in a Word document, their latest financial report in Excel or even your latest Powerpoint presentation. You can even store that company's URL so that clicking it will display their website.
    Hope this helps
    Regards
    Michael

  • Firefox hangs regurlary, I can still use other programs on my laptop

    Flash and other add ons are up to date. Using firefox 3.0.2, on windows 7

    If it hangs periodically (a few seconds every minute or every 10 minutes for instance), delete '''places.sqlite''' according to the procedure in [[The bookmarks and history system will not be functional#w_solution-2-create-a-new-places-database]].
    Make also sure you use [[How do I upgrade my graphics drivers?|the latest graphic driver version]].

  • HT1689 If I use the itunes store to buy songs, can I use other programs like winamp to play the content or am I restricted to using itunes?

    If I use itunes store to purchase content, can I use media players like winamp to play them or am I restricted to using itunes only?

    If you buy a Canadian iTunes cards and will have a Canadian mailing address you can use to set up a new account in the iTunes Store there, yes. Note that you will not be allowed to use the Canadian iTunes Store once  you return to the US, though any content you purchased will still work.
    Regards.

  • When iTunes is open (music playing), how do I use other programs, e.g., mail?

    How to get iTunes music to play in the background.

    Hi pgarard1,
    If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Regards,
    - Brenden

Maybe you are looking for