Default value for depreciation area

While running repeat run depreciation, i am facing following error:
"Depreciation area 90 in company code IN00 does not have default values"
Let me know abt what value it is asking & how to solve the problem
Depreciation area 90 is a revaluation depreciation.

Hi
Try SPRO - Asset Accounting - Depreciation - Valuation Methods - Depreciation Key - Default Values
Thank You,

Similar Messages

Default value for variable are not within permitted value range (precalc)

Hello BW community
Issue:
I have created a variable (Characteristic Value/ Manual input-default value) and use the precalculated value set (details-basic settings). In the further variable definition I could select the precalculated value set in 'Default values', which I have defined beforehand in the broadcaster..
The precalculated value set in the broadcaster settings is just based on a master data query on 0CUSTOMER.
Error:
The variable gets the error E991/R9E Errors: Default values for variable 'XXX' are not within permitted value range.
The detail description of the error is: You defined default values for variable 'Sold-to party precalc value set for manuel input' that are not appropriate for the variable type; for example, a range is defined as a default value for a variable that only permits a single value.
So please has someone had the same issue and found out how to solve it? It would be excelent to get good solution for this issue.
Best regards and thanks
Christian
PS-1: System BW 701 / SAPKW70105
PS-2 : there has been a SDN entry with the same topic but not resolved too.
link: /thread/980839 [original link is broken]

Hello,
Thanks for your response.
I should have mentioned that in my post. I tried this very first time. I thought that this is the place where you provide default value. But I got following exception at that time, so I thought, may be this is used for something else.
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
oracle.jbo.NameClashException: JBO-25001: Object viewAllInd of type Control Binding Definition already exists.
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:415)Do I need handle something else when you put the default value?
Thanks,
Jai

How to make default value for controlling area for MDG-F 7.0

how do we default certain pre-defined values for few fields? e.g. controlling area or company code for MDG finance?
Thank you in advance.
SP

Hello Sahil
Account and CC/PC are 2 different entity types. For PC and CC there is dependency. First you have to load Cost centers and then load PC.
For CC - load CC master data first. Then load hierarchy file then group file and finally assignment file.
Follow same process for PC.
GL you can load independently but you have first load group GL then operational GL and then GL at company code level,
Kiran

Account Creation - Badi for Default values for BP Role and Sales Area

Hi all,
my requirement regards the possibility to create a new prospect (a link should be available in the navigation bar or create section).
Logically, a bp role as "Prospect" and particoular sales area should be created automatically.
I created an implementation for the BADI definition "BADI_CRM_BP_UIU_DEFAULTS". But don't know how to create the default values for BP role and Sales area:
In my code
assign cr_me->('VIEW') to <lv_view_name>.
if sy-subrc ne 0.
exit.
endif.
lv_viewname = <lv_view_name>.
case lv_viewname.
when 'AccountDetails.htm'.
I obtain the viewname "AccountDetails" , the related context "Header". After I don't know how to proceed to obtain the related entities through the relationship BuilRolesRel and BuilSalesArrangementRel.
Am I following the right way? Is there another solution to prepare the output for default values?
Any kind of suggestion will be appreciated.
Regards, Roberto

go to spro>cross-application components>sap busines partner>business partner> basic settings>field groupings>Configure Field Attributes per BP Role
Double click the business role which you want to customaze (e.g. 'A') and change the proper settings.
Regards.

What are the default values for "default if unwired"?

How do you know what the default value for an object will be...if using a "use default if unwired" with an event case?
Is there a listing somewhere of what default values will be?
Thank you,
cayenne

tst wrote:
Personally, I would highly recommend disabling this on every single tunnel coming out of an event structure (with the possible exception of the tunnel going to the loop's stop terminal). If you use this option, you are almost guaranteed to forget to wire a required value into a tunnel at some point in the future when you add a new case.
More generally, I think that this option should not be the default for these tunnels. You can see more about this here and I would suggest voting it up if you agree with it - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Output-tunnels-from-event-structure-should-default-to-...
VERY much agreed! Disabling the "default if unwired" option makes absolutely certain that you have considered the correct value for every case.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

What are the default values for the NetStream.multicast***** properties

I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
Sorry for my poor english, Thanks.

the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream. in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit. setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher. if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4). this is for safety. we recommend you always leave push enabled.
each peer (including the publisher) can change the multicast stream parameters dynamically. changes are local to that peer.
for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called. example:
   var ns:NetStream = new NetStream(netConnection, groupSpecification);
   ns.multicastWindowDuration = 10; // change default for everybody
   ns.publish("mystream");
   ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick. overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

Default values for static report parameters are not visible when scheduling

Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource.
This test report has one Static parameter.
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

Hi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick

Default values for the controlling area and language

Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant Gokhale

Hello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks.

How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu N

Hey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS)

I need to pass null as a default value for a parameter in Before Trigger

Hi All,
I am using Before trigger function in calculation tab which has some set of parameters.So, I accept some parameters which are passed to this Before Trigger function and need these parameters default value as null.
To be clear I want to set the Default value for a parameter in workbook to be NULL and pass the same to the calling Function.
please help me.
Thanks in advance

Hi All,
I am using Before trigger function in calculation tab which has some set of parameters.So, I accept some parameters which are passed to this Before Trigger function and need these parameters default value as null.
To be clear I want to set the Default value for a parameter in workbook to be NULL and pass the same to the calling Function.
please help me.
Thanks in advance

How to set default value for vc2_255_arr in plsql parameter directive?

Hi,
I would like to set a default values for a plsql parameter which is of vc2_255_arr type. How to do that?
Below is the example from PL/SQL Server Page.
+" To set a default value, so that the parameter becomes optional, include a default="expression" attribute in the directive. The values for this attribute are substituted directly into a PL/SQL statement, so any strings must be single-quoted, and you can use special values such as null, as in the following example:+
+<%@ plsql parameter="p_last_name" default="null" %> "+
My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"
*<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" %>*
Thanks in advance!
kwong

My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
   type vc2_255_arr is table of varchar2 (255)
                          index by binary_integer;
   vc2_255_arr_default   vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
   vc2_255_arr_default (1) := 'abc';
   vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
   arr   pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
   for i in 1 .. arr.count
   loop
      dbms_output.put_line (arr (i));
   end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %>

How to set default value for Zfeild using statusprofile

hi experts,
I need to set a default value for a zfeild using status profile.Although we can default the values,using getter and setter methods,but in my requirement,the feild will be defaulted when the page is locked,also in display mode,which will require me to write code to unlock then set the value and then write a commit,as there wont be any user action performed.
I have created a zstatus profile and have set the required status to inital,but no luck
please suggest if this canbe achived through status profile.
Regards
Anu.

Hi,
You can check in the getter if the Page is locked and then display the value to want to display. Note that this will be just Displaying the default value for the Zfield and it will not set the default value into the Zfield in DB, because when the document is locked ( means locked for editing - mostly when system status is completed ) , setters are not called and so you can display the value but cant set it. This is fine if the value you want to display in Z field is just for user's informations and its not required to save this default value.
The best approach would be to set the value in the Zfield before the page is locking. For example, If you wat to set the zfield value when status is set to "Completed" , then you can configure an action that is 1) triggered during saving of the document with 2) start condition "When status is completed" ( both 1 and 2 you can mention in action defination ), then Implement this action badi in which you can set the Zfield to default value.
This will ensure that default value is always set whenever the page is getting locked for editing ( i assumed that page lock means status completed ).
Thanks & Regards
Suchita

How can I get the default value of a particular preference programatically. I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I get the default value of a particular preference in FireFox?.
I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
Any help towards acheiving this programtically is greatly appreciated.
If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Dear Friend,
Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
Then you can get the value from the outparameter using callablestatement.getXXX().
Try that way.
For free tral versions of JDBC Drivers go to www.Atinav.com

Default value for Read-Only Picklist Field

Hi, all--
I would like to have a default value ("Undetermined") for the "Associated Account" read-only picklist value. I have an account record of this value for this purpose. This is because if there is no value in the field, the record will not be included in a report that includes the field. I do not want to make the field required at this point.
Field management doesn't appear to allow any default value for read-only picklists. Does anyone know how to get around this, either at the lead record stage or at the lead report stage (without resorting to an analytic, which won't work for what we are doing)?
Thanks.

That's a great question. It doesn't appear as though you can select it from the typical method of Admin | Application Customization | Lead | Lead Field Setup | Associated Account.
Have you tried creating a workflow to populate the field using Before Modified Record Saved?

Default value for attribute "COUNTRY" in BP_HEAD_SEARCH/MainSearch

Hi Gurus,
Requirement is to set default value for attribute "COUNTRY" in BP_HEAD_SEARCH/MainSearch when user clicks on Corporate Account.
Below is code that i have written in DO_PREPARE_OUTPUT.
Code is working fine and in the debug also i can see the value of COUNTRY is set to DE, but it is not showing on the screen for first time but when i load component second time(Refresh the screen), it shows me value.
Any help would be appreciated. If somebody has otheralternative kindly share.
CALL METHOD super->do_prepare_output( iv_first_time = iv_first_time ).
Calling Super Method
CALL METHOD super->do_prepare_output
   EXPORTING
     iv_first_time = abap_true.
Data Declatation
DATA :lr_col            TYPE REF TO if_bol_bo_col,
        lr_current        TYPE REF TO if_bol_bo_property_access,
        lr_param          TYPE REF TO if_bol_bo_property_access,
        lr_qs             TYPE REF TO cl_crm_bol_dquery_service,
        lv_attr_name      TYPE name_komp,
        lv_sign           TYPE bapisign,
        lv_option         TYPE bapioption,
        w_country_exist   TYPE c,
        w_param           TYPE string,
        w_value           TYPE string,
        w_flag            TYPE c.
Getting SEARCH Context Node
lr_qs ?= me->typed_context->search->collection_wrapper->get_current( ).
Get Selection Parameters
lr_col ?= lr_qs->get_selection_params( ).
Start from first parmaters
lr_current = lr_col->get_first( ).
Clearing Variables
CLEAR : w_country_exist, w_flag, w_param, w_value.
Loop till we have selection paramters
WHILE lr_current IS BOUND.         " While loop 1
checking attribute name is COUNTRY then setting some variable
    w_param = lr_current->get_property_as_string( 'ATTR_NAME' ).
    CASE w_param.
      WHEN 'COUNTRY'.
If country is filled then setting variable
        w_value = lr_current->get_property_as_string( 'LOW' ).
        IF w_value IS NOT INITIAL.
          w_country_exist = abap_true.
        ENDIF.
When we got COUNTRY attribute then setting flag
        w_flag = abap_true.
    ENDCASE.
Calling next parameter
    lr_current = lr_col->get_next( ).
ENDWHILE.                          " While loop 1
In below block we are checking is COUNTRY attribute is blank and
we have found COUNTRY attribute in current selection paramters
IF lr_qs IS BOUND.                 " SEACRCH CONTEXT BOUND
If vairable is blank means DE or any other value is not filled in COUNTRY Attribute
    IF w_country_exist IS INITIAL.   " w_contry_exist
We have to add selection attribute if we come accross COUNTRY attribute during our search
      IF w_flag EQ abap_true.        " w_flag
Adding COUNTRY attribute with default value 'DE'
        lr_qs->add_selection_param( EXPORTING iv_attr_name = 'COUNTRY'
                                              iv_sign      = 'I'
                                              iv_option    = 'EQ'
                                              iv_low       = 'DE' ).
      ENDIF.                         " w_flag
    ENDIF.                           " w_contry_exist
ENDIF.                             " SEACRCH CONTEXT BOUND
In below block we will remove COUNTRY attribute when it has blank value
IF lr_qs IS BOUND AND w_country_exist IS INITIAL.
    lr_current = lr_col->get_first( ).
    WHILE lr_current IS BOUND.
      w_param = lr_current->get_property_as_string( 'ATTR_NAME' ).
      CASE w_param.
        WHEN 'COUNTRY'.
          w_value = lr_current->get_property_as_string( 'LOW' ).
          IF w_value IS INITIAL.
            lr_col->remove( iv_bo = lr_current ).
          ENDIF.
      ENDCASE.
      lr_current = lr_col->get_next( ).
    ENDWHILE.
ENDIF.
Edited by: Harsharandeep Singh on Apr 28, 2011 3:44 PM

Hi,
Try it like this:
DATA:
    lr_bo        TYPE REF TO if_bol_bo_property_access ,
    lv_attr_name TYPE name_komp.
FIELD-SYMBOLS:
    <ls_param>   TYPE crms_thtmlb_search_criterion.
READ TABLE parameters
       ASSIGNING <ls_param>
       WITH KEY field = 'COUNTRY'.
IF ( sy-subrc = 0 ).
    <ls_param>-value1 = ip_pfct.
ENDIF.
CHECK ( me->parameter_collection IS NOT INITIAL ).
lr_bo = me->parameter_collection->get_first( ).
WHILE lr_bo IS BOUND.
    CALL METHOD lr_bo->get_property_as_value
      EXPORTING
        iv_attr_name = 'ATTR_NAME'
      IMPORTING
        ev_result    = lv_attr_name.
    IF lv_attr_name EQ 'COUNTRY' .
      CALL METHOD lr_bo->set_property
        EXPORTING
          iv_attr_name = 'LOW'
          iv_value     = 'DE'.
      EXIT.
    ELSE.
      lr_bo = me->parameter_collection->get_next( ) .
    ENDIF.
ENDWHILE .
Kind regards,
Micha

Default value for depreciation area

Similar Messages

Maybe you are looking for