Default Value for Sold-To Value

Hello -
We are on version 3.2 of Solution Manager, and are using Change Management for Urgent Transports. All is working, but want to make some items better. When the user goes to transaction CRMD_ORDER, and create a change request, the field Sold-To is always 35 for us. We would like this to default in. How can this be done?
Thanks,
George

Thanks Raghu,
The situation is that we want to use the BSP Application version of the Service Desk to create messages for all our IT internal issues/questions. In the BSP, you do not specify the IBase, therefore the sold-to is never determined. And since all our messages will be internal, I am wondering if there is a way to always default the sold-to to our company org without modifying the BSP to add the IBase component.
Regards,
Patrick

Similar Messages

Default value for variable are not within permitted value range (precalc)

Hello BW community
Issue:
I have created a variable (Characteristic Value/ Manual input-default value) and use the precalculated value set (details-basic settings). In the further variable definition I could select the precalculated value set in 'Default values', which I have defined beforehand in the broadcaster..
The precalculated value set in the broadcaster settings is just based on a master data query on 0CUSTOMER.
Error:
The variable gets the error E991/R9E Errors: Default values for variable 'XXX' are not within permitted value range.
The detail description of the error is: You defined default values for variable 'Sold-to party precalc value set for manuel input' that are not appropriate for the variable type; for example, a range is defined as a default value for a variable that only permits a single value.
So please has someone had the same issue and found out how to solve it? It would be excelent to get good solution for this issue.
Best regards and thanks
Christian
PS-1: System BW 701 / SAPKW70105
PS-2 : there has been a SDN entry with the same topic but not resolved too.
link: /thread/980839 [original link is broken]

Hello,
Thanks for your response.
I should have mentioned that in my post. I tried this very first time. I thought that this is the place where you provide default value. But I got following exception at that time, so I thought, may be this is used for something else.
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
oracle.jbo.NameClashException: JBO-25001: Object viewAllInd of type Control Binding Definition already exists.
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:415)Do I need handle something else when you put the default value?
Thanks,
Jai

SQLLDR - how to set a default value for an empty string

I'm using SQLLDR to load data from a flat file on Oracle 10g 10.2.0.4 EE, Linux RHEL 4 update 6. Seems like my question is simple, but darned if I can't find the solution.
My source file (comma delimited extracted form a different RDBMS) has some (not all) rows where the output for a string is "", and not NULL. How do I check for empty string and add a default value in the control file? The target column is non-nullable
Here's my current control file - however, the column attributeName where sometimes the source record is "" does not get evaluated as NULL.
load data
infile 'mydata.del'
badfile 'mydata.bad'
discardfile 'mydata.dsc'
into table mydata
fields terminated by "," optionally enclosed by '"'
   TRAILING NULLCOLS
(l_metadata,
company,
className,
attributeName "decode(:vc_attributeName,null, 'none')",
attributeDefault)
{code}
When I tried decode with "", I received the following error:
{code}SQL*Loader-350: Syntax error at line 11.
Expecting "," or ")", found ", 'none')".
attributeName "decode(:vc_attributeName,"", 'none')", {code}
This does not work either:
{code}
load data
infile 'mydata.del'
badfile 'mydata.bad'
discardfile 'mydata.dsc'
into table mydata
fields terminated by "," optionally enclosed by '"'
   TRAILING NULLCOLS
(l_metadata,
company,
className,
attributeName NULLIF attributeName = BLANKS ,"decode(:vc_attributeName,null, 'none')",
attributeDefault) I get the following in the log:
Table COMPANYMETADATA, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
   Column Name                  Position   Len Term Encl Datatype
L_METADATA                          FIRST     *   , O(") CHARACTER
COMPANY                            NEXT     *   , O(") CHARACTER
CLASSNAME                         NEXT     *   , O(") CHARACTER
ATTRIBUTENAME                     NEXT     *   , O(") CHARACTER
    NULL if ATTRIBUTENAME = BLANKS
    SQL string for column : "decode(:attributeName,null, 'none')"
ATTRIBUTEDEFAULT                  NEXT     *   , O(") CHARACTER
Record 1: Rejected - Error on table COMPANYMETADATA, column ATTRIBUTENAME.
ORA-01400: cannot insert NULL into ("SRV5"."COMPANYMETADATA"."ATTRIBUTENAME")
{code}
Any help is appreciated -
Edited by: kpw on Feb 9, 2009 11:10 AM

Hello,
I just loaded following data successfully in my_data table using the same control file I posted. Yes it will evaluate "" as null and replace with none, remember in control file you have this option, "optionally enclosed by '"'.
#my_data.dat
"myname1", "attribname1"
"myname2", "attribname2"
"myname3", "attribname3"
"myname4", ""
#my_data.ctl
load data
into table my_data
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
my_name char(30),
vc_attributeName "decode(:vc_attributeName,null, 'none', :vc_attributeName)"
{code}
Here is the output log file
{code}
Control File:   my_data.ctl
Data File:      mydata.dat
Bad File:     mydata.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table MY_DATA, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
   Column Name                  Position   Len Term Encl Datatype
MY_NAME                             FIRST    30   , O(") CHARACTER
VC_ATTRIBUTENAME                     NEXT     *   , O(") CHARACTER
    SQL string for column : "decode(:vc_attributeName,null, 'none', :vc_attributeName)"
Table MY_DATA:
4 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array:                  18560 bytes(64 rows)
Read   buffer bytes: 1048576
Total logical records skipped:          0
Total logical records read:             4
Total logical records rejected:         0
Total logical records discarded:        0
Run began on Mon Feb 09 18:17:35 2009
Run ended on Mon Feb 09 18:17:36 2009
Elapsed time was:     00:00:00.98
CPU time was:         00:00:00.10
{code}
Hope this helps clearing your dobuts
Regards

How to set default value for a drop down in Mobile Application Studio

Hi,
We have a requirement in which for a drop down - Transaction type (Activities), the value should be defaulted to 'Visit' and the Activity Category should be 'Sales Visit'. I tried debugging the code and got the piece of code where this value is referred, but i'm unable to find out the location where this value is picked from. Also while opening up the properties corresponding to this, there is a default value tab in the properties pane. I tried by giving this default value, but didn't work. When I'm trying to revert the changes i've made in the property, it is showing up an error.
Any pointers on this would be of great help.
Thanks in advance,
Rasmi.

Hi Rasmi,
You can default the process type field of BOACTIVITY by different ways-
1.In BOL, business object BOACTIVITY loaded event, check the parameter bIsNew and then default the value of process type if you want it only for new activities.
Other attributes currently get defaulted in the attributechanged event of BOACTIVITY where field is processtype.So if processtype is defaulted it will try to default other attributes based on that.It will pick values from the customizing maintained in SPRO->CRM->Transactions->Basic Settings->Define Transaction Type->Customizing Header.
2.You can also do defaulting in the UI.If you want to default one field based on a value selected for drop down, then write the code in the onselected2 event of the drop down.
In your specific case, best way is to use option 1.
Regards
Vivek

How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu N

Hey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS)

How to set default value for drop down box in jsf

Hi,
Can anyone help me to set the default value in drop down box using <af:selectManyChoice> ?
As I know there is an unselectedLabel attribute in <af:selectOneChoice> but not valid attribute for <af:selectManyChoice>.
Any help must be appreciated.
Regards,
AK

Hi Frank
My entity type is a List in managed bean. I have set the entityType in the constructor of the managed bean. I have attached my code here.
TPSearchCriteriaBean.java****************************************
/** Constructor */
public TPSearchCriteriaBean() {
super();
entityType=new ArrayList<String>();
entityType.add(UIConstants.LIST_ITEM_ALL);
authorizationType=new ArrayList<String>();
authorizationType.add(UIConstants.LIST_ITEM_ALL);
companyType=new ArrayList<String>();
companyType.add(UIConstants.LIST_ITEM_ALL);
mrgStatus=new ArrayList<String>();
mrgStatus.add(UIConstants.LIST_ITEM_ALL);
legalStatus=new ArrayList<String>();
setEntityType(entityType);
setAuthorizationType(authorizationType);
setCompanyType(companyType);
setMrgStatus(mrgStatus);
country = "0";
//address = new AddressBean();
UIConstants.java***********************************************************
public static final String LIST_ITEM_DEFAULT = "select";
public static final String LIST_ITEM_ALL = "0";
LOVManager.java*****************************************************************
public List<SelectItem> getLovList(String lovType, boolean requiredOption_SELECT, boolean requiredOption_ALL)
log.debug("LOV loading for " + lovType + ": START");
List<SelectItem> lovList = new ArrayList<SelectItem>();
//check validity of lov loading request
validLov:
for (int i = 0; i < lovTypeArray.length; i++)
if (lovTypeArray.equals(lovType))
break validLov;
log.debug("ERROR: LOV Type not valid.");
return lovList;
//First select is replaced by ALL here
//<-- Select --> should be an option
if (requiredOption_SELECT)
lovList.add(new SelectItem(UIConstants.LIST_ITEM_DEFAULT, "--Select--"));
LOVDao dao = new LOVDao();
dao.loadLOVValues(lovType, lovList);
log.debug("LOV Loading successful!");
//<ALL> should be an option
if (requiredOption_ALL)
lovList.add(new SelectItem( UIConstants.LIST_ITEM_ALL, "ALL"));
return lovList;
Kindly help me.
Regards,
AK

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

Pass the results from a selection formula to the default values for a parameter field

Post Author: kevans
CA Forum: General
Crystal 10 u2013 SQL 2000
I want to create a parameter field that will display all of our IT Departments so the end user can select the one they want to run the report against, such as IT-Security, IT-Network, etc. about 40 in all. BUT I donu2019t want this to be a static list where I type in all 40 depts in the default list, I was hoping I could do something more dynamic such a formula field that says u201C if {group.name startswith u2018ITu2019 then {group.name}u201D and then have the parameter field pull from this source.
Iu2019m sure this has been answered in a previous post but Iu2019m not finding it. I see stuff on creating a record selection formula such as u2018if {?group} like u2018IT-Secur*u2019 thenu2026u201D but this leaves too much room for error if people donu2019t type the name correctly. Maybe Iu2019m not using the record selection formula correctly? Sorry if I offend anyone but I just upgraded from 8 to 10 and thought for sure this option would be in 10, perhaps built right into the parameter default value page where you can place in select criteria but NOTHING has changed.

Post Author: sharonmtowler
CA Forum: General
if you are creating the parameters in the rpt file, it will only pull values you enter, or directly from the database
in the record selection you can do something like this, so if they only enter the first 2 characters it should pick up only the IT etc.
(if eft(,2)={?parameter} then true else ={?parameter})

I need to pass null as a default value for a parameter in Before Trigger

Hi All,
I am using Before trigger function in calculation tab which has some set of parameters.So, I accept some parameters which are passed to this Before Trigger function and need these parameters default value as null.
To be clear I want to set the Default value for a parameter in workbook to be NULL and pass the same to the calling Function.
please help me.
Thanks in advance

Hi All,
I am using Before trigger function in calculation tab which has some set of parameters.So, I accept some parameters which are passed to this Before Trigger function and need these parameters default value as null.
To be clear I want to set the Default value for a parameter in workbook to be NULL and pass the same to the calling Function.
please help me.
Thanks in advance

Displaying default value for a field in ALV table

Hai all,
     I am having an ALV table in which I want to display Requisition number by default using a value which i generated randomly and it is stored in a variable.
While displaying ALV table my req number field should display that value by default when ever user is inserting a row( all the coloumns n my alv are editable.
Is it possible??
Kindly give some suggestions.
Thanks in Advance,
Nalla.B

Hai Kris,
    I took help from ur link and i declared a global attribute request_number.
and i created an event handler ON_ALV_INSERT and did the follwing coding for giving default value wen ever am inserting new row.
FIELD-SYMBOLS: <wa_row> LIKE LINE OF r_param->t_inserted_rows.
DATA bill_details TYPE REF TO zdom_bill_detail.
LOOP AT r_param->t_inserted_rows ASSIGNING <wa_row>.
    bill_details ?= <wa_row>-r_value.
    IF bill_details->REQ_NUMBER IS INITIAL.
DATA lo_nd_bill_detail TYPE REF TO if_wd_context_node.
DATA lo_el_bill_detail TYPE REF TO if_wd_context_element.
DATA ls_bill_detail TYPE wd_this->Element_bill_detail.
navigate from <CONTEXT> to <BILL_DETAIL> via lead selection
lo_nd_bill_detail = wd_context->get_child_node( name = wd_this->wdctx_bill_detail ).
lo_el_bill_detail = lo_nd_bill_detail->get_element( index = <wa_row>-index ).
      lo_el_bill_detail->set_attribute(
        EXPORTING
          name = 'REQ_NUMBER'
          value = wd_comp_controller->request_number
Wen am setting the value of wd_comp_controller->request_number to my context attribute am getting NULL object ref error.
lo_el_bill_detail->set_attribute(
    name = `REQ_NUMBER`
    value = wd_comp_controller->request_number ).
Pls give some suggestions,
Thanks in Advance,
Nalla.B

Error 7 occurred at Get LV Class Default Value.vi only in my executable for Print Report - LV 2010 SP1

I have a program written which uses the print report function. Everything works fine in the uncompiled code, my report prints just fine. I can compile my project all the way to a full installer. When I run the executable I get the error:
Error 7 occurred at Get LV Class Default Value.vi
With the following text:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Complete call chain:
     Get LV Class Default Value.vi
     NI_report.lvclass:New Report.vi
     print report.vi
     EMS V3.0 streamline.vi
LabVIEW attempted to load the class at this path:
H:\InMotion\EMS\builds\EMS_01\Emissions Analyzer\EMS.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass
"EMS V3.0 streamline.vi" is my main vi, "print report.vi" is the subvi that creates and prints the report based on all the information sent to it. I get no warning when I compile this to an executable. I already tried repairing both LV SP1 and the report generator toolkit. No change after I compile to an exe.
Any help would be appreciated. Thanks.
Garrett Herning

Ok, I tried that... and now I get an error when I try to compile to an executable... This is right at the end of the build and will not let me build an executable.
Error:
An error has occurred. Expand the Details section for more information.
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Method Name: Linker:Write Info To File

How to use one variable as a default value for another variable?

Hi Experts,
Is it possible to use one variable as a default value for another variable?
For example:
Variable 1 = current calendar year month
Variable 2 = mandatory input ready variable for calendar year month
I want to use variable 1 as default value for variable 2, but also have the ability to change the month if required.
Thanks!
Kathryn

u can use replacement path variable
in that case u can replace the values of 1 variable with the another variable...
but u cannot do this setting
u cannot make variable 2 as mandatory
u cannot enter value for variable 2
because by default it will take the value of variable 1
u have to make follow settings
variable 2
name , technical name
processing by = replacement path
infoobject = ocalmonth
next tab
replaced by another variable
variable name
offset start , offset lenght
save and hit okey

How to set a default value for a page item

I am working with a facility table that has name and address information. The user can add contact name information on a separate page. Since the address for the facility and contact is usually the same, I want to add a default value for the contact address. The facility page is on 201 and the link to add a new contact row is on page 202. I showed in the default value :P201_street for the contact's address. But, when I run the page, the contact address field shows the :P201_street, not the actual facility address. What am I leaving out? Must be something obvious?!
Thanks very much.
Judy

In the default value, I showed: v('P201_STREET1') with the default value type of: PL/SQL Expression and received the following oracle error ==> Item default is not a PL/SQL expression. Use &ITEM syntax. The v('ITEM') syntax is not valid for item defaults. So I changed it to: &P201_STREET1 and got another oracle error , ERR-9132 error in PLSQL expression for item default code, item=P202_STREET1.
Any more suggestions? Thx.
Judy

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set default value for vc2_255_arr in plsql parameter directive?

Hi,
I would like to set a default values for a plsql parameter which is of vc2_255_arr type. How to do that?
Below is the example from PL/SQL Server Page.
+" To set a default value, so that the parameter becomes optional, include a default="expression" attribute in the directive. The values for this attribute are substituted directly into a PL/SQL statement, so any strings must be single-quoted, and you can use special values such as null, as in the following example:+
+<%@ plsql parameter="p_last_name" default="null" %> "+
My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"
*<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" %>*
Thanks in advance!
kwong

My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
   type vc2_255_arr is table of varchar2 (255)
                          index by binary_integer;
   vc2_255_arr_default   vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
   vc2_255_arr_default (1) := 'abc';
   vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
   arr   pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
   for i in 1 .. arr.count
   loop
      dbms_output.put_line (arr (i));
   end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %>

Default Value for Sold-To Value

Similar Messages

Maybe you are looking for