Default value to a field in PBO

Hi all,
I need to set a default value to a fields in a screen.
But when i declared field as NUMC , i am not able to store 0 (zero value) into it .
and also when iam declaring as integer also iam not able to store 0 .
Pls anybody let me know how to set the defualt value.
its urgent

Hi Madhavi,
This is the issue with NUMC type field. It will not display zero on the screen. As you want it only numeric field then NUMC not suit your need as it can also store CHAR values. So you better declare it as CHAR field and in the code give error if someone enters CHAR values for that field like below.
IF l_field CA sy-abcde.
ERROR -Only numeric values allowed.
ENDIF.
Regards,
Atish

Similar Messages

Assigning a default value to a field

Hello Everyone,
       Could you please tell me how to assign a default value to a field in a transparent table, so that while creating an entry even if we don't enter the value, a default value will be assigned.
Thanks,
Anbu.

Like this
DATA: BEGIN OF itab OCCURS 0,
        field1 TYPE c VALUE 'X'
        field2 TYPE c,
      END OF itab.
append itab.
append itab.
You will have by default X set in both rows for field1.
Regards
Marcin
PS: Ooops I just noticed you meant transparent table but I wrote about internal one. As long as you maintain that table using maintenance view you can use event 05 - When Creating a New Entry and set fixed value for a field there. So whenever you create new entry it will receive that value.
Edited by: Marcin Pciak on Jun 23, 2010 8:57 AM

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

How to set default value to input field dynamically

Hello Experts,
I am using adobe forms inside Webdynpro Java.
Adobe form is having few input fields where at run time i want to assign default value to those fields.
How can i do it ?
Thanks in advance,
Vinay
Edited by: VINAY on Feb 24, 2011 6:39 AM

Hi Mate,
Just set the value to the webdynpro context fields on view init.
if its like that will override the values entered by use on the form.
just check if the default value is equall to the field value if yes leave it, if not dont touch that field.
does this make sense...?
Cheers,
Sai

Want to affix a default value to a field in PO creation

Hi all,
I want to set the default value for the field 'Account assignment category ' when a certain type of Purchase order is created in all the screens pertaining to Purchase order.
Please suggest
regards
kanishak

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

Field with a default value from another field

I need to populate a field as the default value from another field that the user inputs. I've tried the scripting that I found from the below Topic in the Archived Forums, but I'm not able to make it work. I've tried numerous variations and still to no avail. I tried to make the scripting work in Acrobat 6 and then decided that maybe I needed to upgrade, so I'm now trying it in Acrobat 8 with no results. Can anyone help?
Topic
Acrobat 5 - field with default value of another field
Ben PF - 03:31am Mar 23, 2007 Pacific
How can I have a field date2 which has the default value of field date1, but which can be edited by the user if necessary without changing the value of date1.
I've tried, but I just can't figure it out!
Any help much appreciated.
Ben
| Back to Topic List | Bookmark | Subscribe
To start a NEW discussion click on the Back to Topic List link and select Add Topic.
If you are in an archive forum please go up to the main topic list (archives are read only).
Messages
2 messages. Displaying 1 through 2.
First Previous Next Last Show All Messages
Gene Dianoski - 5:22am Mar 23, 07 PST (#1 of 2)
This, or some variation of this, should work:
if(this.getField("date2").value == ""{
this.getField("date2").value = this.getField("date1).value;
| Bookmark back to top
Ben PF - 6:49am Mar 23, 07 PST (#2 of 2)
Thanks very much.
I put it in at document level to start, but it didn't run the script automatically when date1 was first filled in, so I have put it in as a mouse exit action in date1 and it works a treat.
Thanks for your help.
Ben

Okay forget what I posted above and lets start over. Go to your first field and under Properties -> Actions Tab -> Select Trigger -> On Blur Run A JavaScript.
Put this:
this.getField("myField2").value = event.target.value;
Make sure that you replace ("myField2") with the actual name of your second field. I just tested this and it works for Acrobat version 6.
I haven't been doing as much javascripting as I used to, so sometimes I too make some basic mistakes.

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

How to set the default values of the field of the context.

Hi Experts ,
I want to set the default value of the field of the context.
Where and how this declaration should be done.
Thanks in Advance.

In the context tab of the view. Select the attribute for which you want to set the default value.it will show the properties at the bottom. set the Default value property to the value which you want to set as the default value.
Regards
Naresh

Hello Guru's, How to setup default value to a field

Hello Guru's,,
will anyone guide me the procedure how to setup a default value to a field in mm01 SAP STD Transaction.
example: material description ' xxxxxxx ' , it should be constant for all materials.
full points for the answer
PV

Hi,
Pls look into it
These are the way to set the default values.
Step 1 :
CONSTANTS : P_MAKTX TYPE MAKT-MAKTX VALUE 'DESCRIPTION'.
STEP 2:
SET PARAMETER ID 'MAT' FIELD 'DESC'.
CALL TRANSACTION 'MM01' AND SKIP FIRST SCREEN.
If it is useful reward points.

Not allows to assign default value to input field using values in datastore

Hi Masters,
Consider that I have one input field in a form. I should assign default value to it. I should assign to it, the value which i have stored in a datastore. When i run the application, if i give default value as 123 ,then it is working fine i.e., it is showing 123 in the textfield in form , but if i give the default value as STORE@ProductId, then it is not displaying that value in the form.
Please help me out.
Thanks & Regards,
Kaushik Sreeram

Hi,
i faced this problem and here's what i concluded:
There's no way you can set default value for input field dynamicly, since the default value of input control is caculated only once (i think on initializing of the iView). The input control and the data store are initialized at the same time, STORE@productID is empty that time...
If you don't need to recieve value through the input field you're trying to initialize, but just to display the value from the store - I suggest you try using another control - Expression Box. It's value is calculated continiously, just like the Label's, and you can refere to it later.
Regards,
Yulia

Displaying default value for a field in ALV table

Hai all,
     I am having an ALV table in which I want to display Requisition number by default using a value which i generated randomly and it is stored in a variable.
While displaying ALV table my req number field should display that value by default when ever user is inserting a row( all the coloumns n my alv are editable.
Is it possible??
Kindly give some suggestions.
Thanks in Advance,
Nalla.B

Hai Kris,
    I took help from ur link and i declared a global attribute request_number.
and i created an event handler ON_ALV_INSERT and did the follwing coding for giving default value wen ever am inserting new row.
FIELD-SYMBOLS: <wa_row> LIKE LINE OF r_param->t_inserted_rows.
DATA bill_details TYPE REF TO zdom_bill_detail.
LOOP AT r_param->t_inserted_rows ASSIGNING <wa_row>.
    bill_details ?= <wa_row>-r_value.
    IF bill_details->REQ_NUMBER IS INITIAL.
DATA lo_nd_bill_detail TYPE REF TO if_wd_context_node.
DATA lo_el_bill_detail TYPE REF TO if_wd_context_element.
DATA ls_bill_detail TYPE wd_this->Element_bill_detail.
navigate from <CONTEXT> to <BILL_DETAIL> via lead selection
lo_nd_bill_detail = wd_context->get_child_node( name = wd_this->wdctx_bill_detail ).
lo_el_bill_detail = lo_nd_bill_detail->get_element( index = <wa_row>-index ).
      lo_el_bill_detail->set_attribute(
        EXPORTING
          name = 'REQ_NUMBER'
          value = wd_comp_controller->request_number
Wen am setting the value of wd_comp_controller->request_number to my context attribute am getting NULL object ref error.
lo_el_bill_detail->set_attribute(
    name = `REQ_NUMBER`
    value = wd_comp_controller->request_number ).
Pls give some suggestions,
Thanks in Advance,
Nalla.B

How to set default value to input field

Hi Experts,
I need to set default value to one input field for the transaction crmd_order as a screen variant. Guide me in doing that.
Regards,
Harish

Using the transaction SHD0, you can define the screen variant. While defining the sceen variant, you are allowed to define the default values.
Using screen variant, for the main transactoin, you can also define the transaction variant and you can use this as an independent transaction.

Urgent: How to set a default value to CLOB field?

Hi All,
As per the requirements we have to populate the CLOB field in a template with default value with some template similar to a letter issued to clients in bank.
So, every time when I insert a record in that table this CLOB field should have that letter template populated by default and user will modify that if required from GUI.
How can I populate that CLOB field by default?
Thanks!

Something like this?
ME_XE?
create table test_clob
pk_value number primary key,
one_clob clob   default rpad('something', 32000, '*')
insert into test_clob (pk_value) values (1);
select * from test_clob;
Table created.
Elapsed: 00:00:00.13
ME_XE?ME_XE?
1 row created.
Elapsed: 00:00:00.09
ME_XE?ME_XE?
          PK_VALUE ONE_CLOB
                 1 something***********************************************************************
1 row selected.
Elapsed: 00:00:02.65
ME_XE?ME_XE?
ME_XE?ME_XE?select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE     10.2.0.1.0     Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
5 rows selected.
Elapsed: 00:00:00.18
ME_XE?

Setting default value for form field assoc with a table column

On a "Create Record" situation I was trying to set the default values of some form fields using a page level "Process". These form fields have Source Type = Database Column. It wasn't working, I could only set non-db assoc form field values no matter when the "Process" was set to exec. From some other posts it seems that this is by design, ie. not being able to programatically set the initial values of form fields that are sourced to db columns. I was hoping to have just one "Process" that would exec to set these initial values in one place rather than scattered about for each field that needed a default value. These particular default values come from ref tables and may be different for each user.
So, it looks like I have to use a "Default Value" plsql chunk for each field on the form itself or else set their value on the calling form's Redirect in the "Set these Items" area.
Is this correct?

You could define a database function which accepts the name of the item and the user ID of the user running the application. Based on the item name and the user ID have the function return the appropriate initial value. Invoke this function in a "Default Value" PL/SQL block.
Does that help in centralizing your initial values? You could have one function per page or one function per application. I would do one function per application.

Default value in LOV field in Create and Update page in OAF

Hi All,
I am unable to default LOV field in Create and Update page in OAF.
I tried in below way :
OAMessageLovInputBean lovBean1 = (OAMessageLovInputBean)webBean.findChildRecursive("AAA");
But I am getting developer mode exception, so please guide me how i can set the default value for create and update page instead of using code in process request method in controller.
Thanks

Hi,
1) In case of create, you can default the value either in EOImpl or in AM while initializing the row:
//in EOImpl
public void create(AttributeList attributeList)
super.create(attributeList);
setXXAttribute(<value>);
//in AM, VO new row initialization :-
VOImpl VO = getVO1();
VO.setMaxFetchSize(0);
VORowImpl row = (VORowImpl)VO.createRow();
row.setXXAttribute(<value>);
VO.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
2) In case of update, execute the VO (also set the where clause if required) in PR method of update page.
--Sushant

Default value to a field in PBO

Similar Messages

Maybe you are looking for