Default Values in Vendor Masters
Hi,
while creating, vendor master I would like to have default in vendor master for Reconciliation Account and Planning group9cash management group) as respectively "210010" and "V7".
Is there any way to achiveb this ?
With Regards,
Jaheer.
Check this link
vendor creation default values
Similar Messages
-
How to set Default value in Vendor master
Hi ,
While creating or Updating Vendor Master , House Bank should take automaticaly one purticular Bank .
How to do this? please kindly help me on this issue.
Thanks
JKhello JK,
for finding Exits and implement please follow below..
you can see in SMOD.
for using this you must create first your own project..its good way..
Goto Tcode --CMOD n SMOD, and create ur project..->click on enhancement -> add Exit name ->click on component ->and check for exact exits by setting break point..
any problem then let me knw.
Regards,
Sujeet -
Vendor creation default values
Where is the config for setting up default values on vendor creation process- fields like- "check double invoice" ?
Thanks
RajHi Rajendra ,
Screen control for the vendor is controlled by the Account group you assign to them. So go to IMG> Financial accounting > Account rec. and payables> Master data > Define account group with screen layout. Here you can find and change the the fields status for General , company code and purchasing data.
Hope it helps.
Thanks
Kiran
P.S Pls award points if you find the answer is helpful. -
Vendor Line Item Display-Default value for customer items
Is it possible in selection screen of transaction FBL1N (Vendor line item display) the default value of field "customer items" to be checked?
Thanks in advance.hi Tsiami
it's not possible. if u want check customer line items go throw this TC:FBL5N
plz assign points
regards
sivareddy. -
How to use copy default values for material from vendor master in Account Group
Dear all:
In define AccountGroup for vendor ,there is a field named DURAS which means default values,who can tell me how to use it?
Any informations are appreciated!Hi Katherine,
I have tried using default value as B in the customizing
If i maintain default values in the vendor master record, it will automatically adopt in the purchase info record.
Here i tried using sales person & telephone no field in vendor master record & it automatically adopts to purchase info record.
Region sales person and telephone no i have maintained in vendor master record, it automatically fetches to info record for the particular account group. I am not sure if there is any relation between vendor master and material master record.
Regards
Subbu. -
Default values for creating vendor master data
Hi.
Is it possible to set default value for payment term and planning group when creating vendor master data of a specific account group?
Thanks in advance.HI,
1, Create a vendor in your Account group as the reference vendor account
2, By t-code:XK01, create new vendor with reference vendor of step 1,
then the system will transfer the value from your reference vendor.
Regards
Ravinagh Boni -
Defaulting values at document level from Vendor Master?
Hi Gurus,
Can anyone tell me whether we have a provision in SAP wherein the system defaults all values in vendor master like Payment method, House bank ID in all the documents wherein the vendor is getting debited or credited with appropriate posting keys.
Thaks in advance and points will be rewarded.
Regards
GopalDear Gopal,
You can use OBU1 to default document type and and posting key.
One way is to default other values as well from vendor master is to implement a proper BAdi/Enhancement that will be called before initialising the screen and default as per your requirement.
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Hope this will help.
Regards,
Naveen. -
Default value in field when creating a new vendor (Transaction: XK01)
Hi, everybody!
Is it possible to set a default value to a field when creating a new vendor (transaction: XK01)?
We need the field "Payment terms" in "Payment transactions accounting" tab and field "Terms of payment" in "Purchasing data" tab to be filled with a default value when creating a new vendor.
Thanks in advance
Best regards,
J MadariagaYou can try creating a transaction varient fron SHD0 for this which will default the requiredd values .
-Hari. -
Default Values for Creation of STO's.
Hello Experts:
When I create STO's, I don't see any source of default values, like Delivery Tolerance, Confirmation control key, etc, that for a PO usually come from the Vendor or The Info Record.
We have managed to add these values via BADI, but for STo's created from APO via Transportation load Builder, this Badi is no taking effect. (The Badi I used is and works fine when doing it online, in ME21N or via a BAPI.
Do you have any experience on where (user exit, etc) to add logic for putting these default values in the STO's created by TLB.
Thanks in advanceSorry the BADI used is ME_PROCESS_PO_CUST
-
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are
Vendor batch No. : Transaction ZJPMPU322
(Background)
There are "vendor batch" and "batch" fields in Goods-in-order and Goods-in-plan lists (transaction ZJPMPU322). Values for these fields are retrieved from inbound delivery document (transaction VL33N). After core 7.0 upgrade, "vendor batch" is not copied from "batch" in inbound delivery document any more so that nothing appears in the vendor batch field in the lists.
(Change request)
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are retrieved from "batch" in inbound delivery document ONLY IF "vendor batch" is blank in the inbound delivery document.
(Current design)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN
(If there is no record in LIPS, blank will be printed out for both fields)
(After change)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN only if LIPS-LICHN is not blank.
If LIPS-LICHN is blank, vendor batch is retrieved from LIPS-CHARG.
(If there is no record in LIPS, blank will be printed out for both fields. If both LIPS-CHARG and LIPS-LICHN are blank, blank will be printed out for both fields),
Following is the program:
REPORT zjpmrpu322 MESSAGE-ID zjpm001
NO STANDARD PAGE HEADING
LINE-COUNT 50
LINE-SIZE 255.
*& Development ID: PU_DD_322_LJP *
*& Report : ZJPMRPU322 *
*& The Purpose of this program is to print the Goods-in-order list *
*& and the Goods in plan list for raw materials, materials purchase *
*& etc at the Sasayama plant, Japan. *
*& Change Log: *
*& Init Who Date Text *
*& PV P V R S Varma 07-May-2003 Initial Version *
*& DU D.Usui 2004/02/26 CR No. 1432 *
*& DU D.Usui 2004/03/08 CR No. 1447 *
*& DU D.Usui 2004/05/06 CR No. 1591 *
Constants
CONSTANTS:
c_werks LIKE ekpo-werks VALUE 'JP01', "Plant code - Sasayama plant
c_id LIKE thead-tdid VALUE 'F02', "Text ID for Info record
c_object LIKE thead-tdobject VALUE 'EKPO',"Object of text for info rec
*c_zzjp_r1 LIKE marc-zzjp_re1 VALUE 'GMP', "Goods in plan- Domestic
*c_zzjp_r2 LIKE marc-zzjp_re1 VALUE 'GMPI', "Import sales order document
c_plus TYPE c VALUE '', "Holding '' sign
c_spras LIKE makt-spras VALUE 'J', "Language key Japan
*c_device(7) type c value 'PRINTER', "Device type
c_form(16) TYPE c VALUE 'ZJPMPU305', "Form name
c_ele_gmp(4) TYPE c VALUE 'GMP', "GMP Text element
c_ele_gmpi(4) TYPE c VALUE 'GMPI', "GMPI Text element
add begin CR1432
c_ele_bgmp(4) TYPE c VALUE 'BGMP', "BGMP
c_ele_bgmpi(5) TYPE c VALUE 'BGMPI', "BGMPI
add end CR1432
c_function(3) TYPE c VALUE 'SET', "Function
c_type(4) TYPE c VALUE 'BODY', "Window area in main window
c_win_head(7) TYPE c VALUE 'HEADING', "Heading window
c_win_shead(7) TYPE c VALUE 'SUBHEAD', "sub heading window
c_win_fot1(7) TYPE c VALUE 'FOOTER1', "Footer 1 window
c_win_main(4) TYPE c VALUE 'MAIN', "Main window
c_comd(8) TYPE c VALUE 'NEW-PAGE', "New-page command
c_zar TYPE ekko-bsart VALUE 'ZAR',
c_x TYPE c VALUE 'X', "Indicator for print options
c_f TYPE c VALUE 'F', "Indicator for Purchase Order
add begin CR1591
Deletion indicator in purchasing document
c_loekz(1) TYPE c VALUE 'L',
For ranges tables
c_sign_i(1) TYPE c VALUE 'I', "Sign(include)
c_op_eq(2) TYPE c VALUE 'EQ', "Option(=)
Confirmation category
c_ebtyp_ab(2) TYPE c VALUE 'AB', "Order acknowledgment
add end CR1591
c_la(2) TYPE c VALUE 'LA'. "Indicator for Inbound deliver
Database Tables
Vaiables / Internal tables *
Internal table to store PO information
Not used after CR1591
DATA: BEGIN OF t_purc OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
charg LIKE eket-charg, "Batch number
matnr LIKE ekpo-matnr, "Material code
werks LIKE ekpo-werks, "Plant
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
END OF t_purc.
Internal table to store material description.
DATA: BEGIN OF t_makt OCCURS 0,
matnr LIKE makt-matnr, "Material code
maktx LIKE makt-maktx, "Material description
END OF t_makt.
Internal table for storage of final EKET data
DATA: BEGIN OF t_eket OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
ebelp_ex(6) TYPE n, "Extended ebelp with length 6
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
dabmg LIKE ekes-dabmg, " Delivered Quantity
charg LIKE eket-charg, "Batch number
matnr LIKE ekpo-matnr, "Material code
werks LIKE ekpo-werks, "Plant
maktx LIKE makt-maktx, "Material Description-- jp check
etens LIKE ekes-etens, "Sequence Number
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
vpnam(40) TYPE c, "Vendor product name
END OF t_eket.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE ekes-eindt, "Item delivery date
menge LIKE ekes-menge, "Scheduled Quantity
dabmg LIKE ekes-dabmg, " delivered quantity
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
mark TYPE c,
END OF t_ekes.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes_temp OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE ekes-eindt, "Item delivery date
menge LIKE ekes-menge, "Scheduled Quantity
END OF t_ekes_temp.
Internal table for storing data from MLGN table.
DATA: BEGIN OF t_mlgn OCCURS 0,
matnr LIKE mlgn-matnr, "material code
lhmg1 LIKE mlgn-lhmg1, "Standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of measure
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
END OF t_mlgn.
Internal table for storing data from MARM table.
DATA: BEGIN OF t_marm OCCURS 0,
matnr LIKE marm-matnr, "material code
umrez LIKE marc-zzjp_cas_size, "Std package unit
meins LIKE ekpo-meins, "alternate unit
END OF t_marm.
Internal table for storing data from MARC table.
DATA: BEGIN OF t_marc OCCURS 0,
matnr LIKE marc-matnr, "Material code
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
END OF t_marc.
Internal table for storing data from lfa1 table.
DATA: BEGIN OF t_lfa1 OCCURS 0,
lifnr LIKE lfa1-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
END OF t_lfa1.
Internal table for Storing data from LIPS table.
DATA: BEGIN OF t_lips OCCURS 0,
vbeln LIKE lips-vbeln, "Delivery document no
posnr LIKE lips-posnr, "Item number for Delivery document
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
END OF t_lips.
Internal table for storing the final display data.
DATA: BEGIN OF t_display OCCURS 0,
g_checkbox type c, "check box for selection of records
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
vpnam(40) TYPE c, "Vendor product name
lifnr LIKE ekko-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
umrez LIKE marc-zzjp_cas_size, "Std package unit
meinh LIKE ekpo-meins, "alternate unit
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
std_pac_no(13) TYPE n, "Std receipt package no
tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
vbeln like ekes-vbeln, "Goods-in-order
vbelp like ekes-vbelp, "Item
add end CR1447
END OF t_display.
Internal table for storing the final display data -Goods in order list
DATA: BEGIN OF t_display1 OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
vpnam(40) TYPE c, "Vendor product name
lifnr LIKE ekko-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
umrez LIKE marc-zzjp_cas_size, "Std package unit
meinh LIKE ekpo-meins, "alternate unit
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
std_pac_no(13) TYPE n, "Std receipt package no
tot_std_pt(13) TYPE n, "Total no of std pallets
END OF t_display1.
Internal table for storing the final display data - Goods in plan list
DATA: BEGIN OF t_display2 OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
vbeln like ekes-vbeln, "Goods-in-order
vbelp like ekes-vbelp, "Item
add end CR1447
END OF t_display2.
add begin CR1591
RANGES: r_matnr FOR mara-matnr, "for p_matnr
r_ebeln FOR ekpo-ebeln. "for p_ebeln
add end CR1591
DATA: line TYPE i. " line number
DATA: g_checkbox TYPE c. "check box for selection of records
DATA: g_tab LIKE sy-index. "variable to hold index
DATA g_tabix LIKE sy-tabix. "holder for table index
Printing Options.
DATA: lw_pr_options LIKE itcpo.
*lw_pr_options-tddest = 'SA03'. " Print Device Name
lw_pr_options-tdpreview = 'X'. " Print Preview
lw_pr_options-tdnewid = 'X'. " New Request
lw_pr_options-tdlifetime = 2. " Retention in Spool
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
SELECT-OPTIONS:
s_date FOR sy-datum DEFAULT sy-datum. " Search period.
PARAMETERS:
p_matnr LIKE mara-matnr, " Material code
p_ebeln LIKE ekpo-ebeln. " Purchase Document No
SELECTION-SCREEN END OF BLOCK blk1.
Selection Screen Checks *
AT SELECTION-SCREEN.
IF ( s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Entry Must in atleast one of the Fields'(t00).
ENDIF.
IF ( NOT p_matnr IS INITIAL ) AND
( s_date IS INITIAL ) AND
( p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del begin CR1591
This check is not found in original FS
IF ( NOT p_matnr IS INITIAL ) AND
( s_date IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del end CR1591
Validations for Data selection *
del begin CR1591
Waste check
IF ( NOT s_date IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
PERFORM f_check_date_in_eket.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
PERFORM f_check_date_in_eket.
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
PERFORM f_check_date_in_eket.
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
( NOT s_date IS INITIAL ) AND
( p_matnr IS INITIAL ).
PERFORM f_check_date_in_eket.
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
( s_date IS INITIAL ) AND
( p_matnr IS INITIAL ).
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
del end CR1591
Data selection from Tables *
START-OF-SELECTION.
SET PF-STATUS 'SELECT'.
add begin CR1591
Set ranges tables
PERFORM set_ranges.
add end CR1591
mod begin CR1591
**Selection of PO data from EKET into internal table t_purc.
PERFORM f_select_eket.
**Selection of corresponding PO data for EKET from EKES into t_ekes.
PERFORM f_select_ekes.
**Selection of material desc from MAKT table into T_makt.
PERFORM f_select_makt.
**Copy the contents of t_purc and t_makt into t_eket table.
PERFORM f_move_eket.
**Replace the corresponding entries of t_eket with t_ekes.
PERFORM f_update_eket.
Selection of PO data from EKET into internal table T_EKET.
PERFORM f_select_eket2.
Selection of corresponding PO data from EKES appending to T_EKET.
PERFORM f_select_ekes2.
Selection of material desc from MAKT table into T_MAKT.
PERFORM f_select_makt2.
mod end CR1591
*Selection of vendor product name.
PERFORM f_select_vpnam.
del begin CR1591
No need
**copy t_eket-ebelp into temporary variable.
PERFORM f_copy_ebelp.
del end CR1591
*selection of data from MLGN table into t_mlgn internal table
PERFORM f_select_mlgn.
*selection of data from marm table into t_marm internal table
PERFORM f_select_marm.
*selection of data from marc table into t_marc internal table
PERFORM f_select_marc.
*selection of data from lfa1 table into t_lfa1 internal table
PERFORM f_select_lfa1.
*Selection of data from LIPS table into t_lips internal table
PERFORM f_select_lips.
del begin CR1591
Don't display list screen when no data exists
*END-OF-SELECTION.
del end CR1591
*lines = sy-linno - 1.
*Collection of data into the final display internal table t_Display
PERFORM f_collect_final.
*Display the contents of t_display as a simple List
PERFORM f_list_display.
AT USER-COMMAND.
PERFORM f_select_layout.
INCLUDE zjpmipu315.
INCLUDE zjpmipu316.
*& Form f_check_MATNR_in_plant
This Routine is to check if the the selected material code is
available in the plant 'JP01'.
FORM f_check_matnr_in_plant.
DATA: l_matnr LIKE mara-matnr.
SELECT matnr UP TO 1 ROWS FROM marc
INTO l_matnr
WHERE
matnr = p_matnr AND
werks = c_werks.
ENDSELECT.
IF l_matnr IS INITIAL.
MESSAGE e000 WITH
'The material is not available in '(t02) c_werks 'plant'(t20).
ENDIF.
ENDFORM. " f_check_MATNR_in_plant
*& Form f_check_EBELN_in_EKPO
This Routine is to check if the Purchase order number selected
is existing or not and if it exists, check if it is related to
the plant 'JP01'.
FORM f_check_ebeln_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
INTO l_ebeln
WHERE
ebeln = p_ebeln AND
werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
MESSAGE e000 WITH
'PO not available or not related to '(t03) c_werks 'plant'(t21).
ENDIF.
ENDFORM. " f_check_EBELN_in_EKPO
*& Form f_check_matnr_in_ekko
This routine is to check if any PO exist for the selected
Material code.
FORM f_check_matnr_in_ekpo.
DATA: l_matnr LIKE ekpo-matnr.
SELECT matnr UP TO 1 ROWS FROM ekpo
INTO l_matnr
WHERE
matnr = p_matnr.
ENDSELECT.
IF l_matnr IS INITIAL.
MESSAGE e000 WITH
'PO does not exist for the material no'(t04) p_matnr.
ENDIF.
ENDFORM. " f_check_matnr_in_ekpo
*& Form f_check_date_in_eket
This routine is to check if any purchase order exists
with the selected
FORM f_check_date_in_eket.
DATA: l_eindt LIKE eket-eindt.
SELECT eindt UP TO 1 ROWS FROM eket
INTO l_eindt
WHERE
eindt IN s_date.
ENDSELECT.
IF l_eindt IS INITIAL.
MESSAGE e000 WITH
'No PO exist with the selected delivery date '(t05).
ENDIF.
ENDFORM. " f_check_date_in_eket
*& Form f_check_werks_in_ekpo
This Routine is to check if the selected purchase order
is associated with the plant JP01
FORM f_check_werks_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
INTO l_ebeln
WHERE
werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
MESSAGE e000 WITH
'The selected P0 is not relevant to '(t06) c_werks 'plant'(t22).
ENDIF.
ENDFORM. " f_check_werks_in_ekpo
*& Form f_select_eket
Routine to collect data from EKET, EKPO, MAKT, EKKO tables
using inner join and store the data into internal table
t_PURC. The data selection is based on the selection screen's
input.
FORM f_select_eket.
IF ( NOT s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~matnr = p_matnr AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~matnr = p_matnr AND
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ENDIF.
IF sy-subrc <> 0.
MESSAGE s000 WITH 'Data not found'(t07).
LEAVE LIST-PROCESSING.
ELSE.
SORT t_purc.
ENDIF.
ENDFORM. " f_select_eket
*& Form f_select_makt
Routine to select the material description for all the
materials present in T_purc table
FORM f_select_makt.
DATA: l_t_makt(4) TYPE c VALUE 'MAKT'.
SELECT
matnr
maktx
FROM
makt
INTO TABLE t_makt
FOR ALL ENTRIES IN t_purc
WHERE
matnr = t_purc-matnr AND
spras = c_spras.
IF sy-subrc <> 0.
MESSAGE s000 WITH
'Relevant data not found in'(t09) l_t_makt 'table'(t23).
ELSE.
SORT t_makt.
ENDIF.
ENDFORM. " f_select_makt
*& Form f_move_eket
Routine to join data in T_PURC and T_MAKT tables into
internal table T_MAKT.
FORM f_move_eket.
LOOP AT t_purc.
t_eket-ebeln = t_purc-ebeln.
t_eket-ebelp = t_purc-ebelp.
t_eket-eindt = t_purc-eindt.
t_eket-menge = t_purc-menge.
t_eket-charg = t_purc-charg.
t_eket-matnr = t_purc-matnr.
t_eket-werks = t_purc-werks.
t_eket-meins = t_purc-meins.
t_eket-lifnr = t_purc-lifnr.
READ TABLE t_makt WITH KEY matnr = t_purc-matnr
BINARY SEARCH.
IF sy-subrc = 0.
t_eket-maktx = t_makt-maktx.
ENDIF.
APPEND t_eket.
CLEAR t_eket.
ENDLOOP.
ENDFORM. " f_move_eket
*& Form f_select_ekes
Routine to select EKES data for all corresponding entries
of T_EKET.
FORM f_select_ekes.
DATA: l_tabix TYPE i.
IF NOT s_date IS INITIAL.
SELECT
ebeln
ebelp
etens
eindt
menge
INTO TABLE t_ekes
FROM
ekes
WHERE
eindt IN s_date.
ELSE.
DESCRIBE TABLE t_purc LINES l_tabix.
IF l_tabix GT 0.
SELECT
ebeln
ebelp
etens
eindt
menge
dabmg
vbeln
vbelp
FROM
ekes
INTO TABLE t_ekes
FOR ALL ENTRIES IN t_eket
FOR ALL ENTRIES IN t_purc
WHERE
ebeln = t_purc-ebeln AND
ebelp = t_purc-ebelp AND
eindt IN s_date.
AND ebeln eq p_ebeln.
and matnr in p_matnr.
ENDIF.
CLEAR l_tabix.
IF NOT s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ELSEIF NOT s_date IS INITIAL AND p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ELSEIF s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ENDIF.
IF sy-subrc = 0.
SORT t_ekes.
ENDIF.
IF NOT t_ekes[] IS INITIAL.
t_ekes_temp[] = t_ekes[].
SORT t_ekes_temp BY ebeln ebelp.
DELETE ADJACENT DUPLICATES FROM t_ekes_temp COMPARING ebeln ebelp.
LOOP AT t_ekes_temp.
READ TABLE t_purc WITH KEY ebeln = t_ekes_temp-ebeln
ebelp = t_ekes_temp-ebelp.
IF sy-subrc NE 0.
CLEAR t_purc.
SELECT SINGLE
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO CORRESPONDING FIELDS OF t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~ebeln = t_ekes_temp-ebeln
AND eket~ebelp = t_ekes_temp-ebelp
AND ekpo~elikz NE c_x
AND ekko~bstyp EQ c_f
AND ekko~bsart NE c_zar.
IF sy-subrc EQ 0.
APPEND t_purc.
CLEAR t_purc.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH: t_ekes_temp, t_ekes.
CLEAR: t_ekes_temp, t_ekes.
Once the header is filled up get the details from EKES
SELECT ebeln ebelp etens eindt menge dabmg vbeln vbelp
INTO TABLE t_ekes
FROM ekes
FOR ALL ENTRIES IN t_purc
WHERE ebeln EQ t_purc-ebeln.
Mark the entries as 'X' which falls in the date range
LOOP AT t_ekes.
IF t_ekes-eindt IN s_date.
t_ekes-mark = 'X'.
MODIFY t_ekes INDEX sy-tabix TRANSPORTING mark.
ENDIF.
ENDLOOP.
SORT t_ekes BY ebeln ebelp ASCENDING mark DESCENDING.
Delete the entries from eket if no entries in EKES falls in the period
LOOP AT t_purc.
l_tabix = sy-tabix.
READ TABLE t_ekes WITH KEY ebeln = t_purc-ebeln
ebelp = t_purc-ebelp.
IF sy-subrc EQ 0.
IF t_ekes-mark NE 'X'.
DELETE t_purc INDEX l_tabix.
ENDIF.
ENDIF.
ENDLOOP.
delete the entries from EKES which do not fall in the specified period
DELETE t_ekes WHERE mark NE 'X'.
ENDFORM. " f_select_ekes
*& Form f_update_eket
Routine to substitute relevant t_eket entries with that of
t_ekes entries.It does not modify the remaining entries for
for which the corresponding values in t_ekes doesnot exist.
FORM f_update_eket.
DATA: BEGIN OF lt_temp_eket OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
dabmg LIKE ekes-dabmg, " Delivered quantity
matnr LIKE ekpo-matnr, "Material code
maktx LIKE makt-maktx, "Material Description-- jp check
etens LIKE ekes-etens, "Sequence Number
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
charg LIKE eket-charg, " Batch number Added by PD 08/08/03
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
END OF lt_temp_eket,
l_menge LIKE ekes-menge.
LOOP AT t_eket.
LOOP AT t_ekes WHERE ebeln = t_eket-ebeln
AND ebelp = t_eket-ebelp.
Added by PD 08/08/03
MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
MOVE t_eket-ebeln TO lt_temp_eket-ebeln.
MOVE t_eket-ebelp TO lt_temp_eket-ebelp.
MOVE t_eket-meins TO lt_temp_eket-meins.
CLEAR l_menge.
l_menge = t_ekes-menge - t_ekes-dabmg.
IF l_menge LE 0.
CONTINUE.
ELSE.
MOVE l_menge TO lt_temp_eket-menge.
ENDIF.
MOVE t_ekes-eindt TO lt_temp_eket-eindt.
MOVE t_ekes-etens TO lt_temp_eket-etens.
MOVE t_eket-lifnr TO lt_temp_eket-lifnr.
MOVE t_eket-maktx TO lt_temp_eket-maktx.
MOVE t_eket-matnr TO lt_temp_eket-matnr.
MOVE t_ekes-vbeln TO lt_temp_eket-vbeln.
MOVE t_ekes-vbelp TO lt_temp_eket-vbelp.
APPEND lt_temp_eket.
CLEAR lt_temp_eket.
CLEAR t_ekes.
ENDLOOP.
IF sy-subrc NE 0.
Added by PD 08/08/03
MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
MOVE t_eket-ebelnDear
Problem No 1 : we are working in a process industries with three plants each of them have three order type. we have define MRP group in "OPPR" then assign each MRP group to Orde types in "OPPE". Now the problem is whn i convert plan order in process order for any material systme automaticaly pick the order type PIi01.
Answer :
1.Please check the OPPR -Plant and MRP group -Select Order Type Button -Check what Order Type you have assinged here ( PI01( May be the default Process Order Type )
2.If you are maintaing MRP group ( 0001 or 0002) , did you asisng the same in MRP1 view ?? because
3.Did you maintain the similar Order type in OPKP -Define Production Scheduling Profile ? -This has highest priority .
4.Did you maintain correct order type in OPJH-Maintain Order Type ??
Refer the expert comments on the same issue : Strategy group to define production order type
Problem No 2: 2nd Problem is system system is not creating plan order for prrevios dates. say i enter PIR for month of november from first november to 30th november and run MRP on 29th the sytem create plan order on 30th of november with exception message 30.
Answer : You can plan the order in back dated , if you maitain Satrt date in the Past optiuon in OPU3/OPU5-Define Scheduling parameters .Goto OPU3 -Select the Order Type -Double click -Maintain 90-60 days in the Start Date in the past in Scheduling Control and Details scheduling tab .
Hope it helps
regards
JH -
Change Description of Service Item default value
Hello
in a service SC, on the item detail basic data, we want to change the default value of the field "Description of Service Item ". by default it is "Service Item" and we want to change it.
Where can I change it excepted in BADI BBP_DOC_CHANGE_BADI
thanks,Hi
Which SRM version are you using ? What is your business requirement ? Do you want to change Service Item description value for every line item in the shopping cart OR
the permanent text displayed on the Left side on the HTML Template.. ?
<b>Incase you want to modify the HTML template Text, then it can be done using HTML Template modification.</b>
Using Transaction SE80, In the Internet Service - BBPSC01, you need to find the relevant HTML Template and make the required chnages to the Description there as per your business requirements.
All BBPSC* transaction are using the HTML sources of service BBPSC01.
So you have to modify template SAPLBBP_SC_UI_ITS_300 from service BBPSC01.
Make sure to publish the complete service on all defined sites so that changes can appear in all respective SRM Client systems.
Related links ->
BBPSC01 Template Labels stored where ????
Re: Template Shopping cart
Re: Internet Service flow
Re: Need to change the field description
Re: how to change descriptions of links on the shopping cart page
How to change "vendor text " label in BBPSC01 and BBP_POC
Hope this will help. Do let me know.
Regards
- Atul -
Tax codes - can you set up default value for rows and freight? HELP!
Hello - I have two issues with tax codes:
1. When adding a sales order if any of the rows do not have a value for "Tax Code" I will get an error "Row without tax was found".
- How can I get all rows on my sales orders, documents, etc to default to a specific tax code? Or will users ALWAYS have to enter the tax code?
2. When addring a sales order with Freight, if the order is added without adding a tax code to the freight I will get an error "Expense with tax was found"
- How can I get the tax code have a default value? We always use the same tax code, so it is redundant to have to enter this information.
Any suggestions?Hi Jhon,
this is the simplest and best way to make a Tax Code default is Go to
Answer for Question 1
Administration -> Setup -> Financial -> Tax -> Tax Code Determination (Click on this)
in that screen you can set a default tax code for both sales as well as Purchase.
If you want to set Tax Code based on Vendors or Customers or Items separately then you can use the Key Fields.
Answer for Question 2
Once you enter the Tax Code in the freight i think it takes the Tax Code itself, I'm not so sure about this one though.
Hope this helps you out
regards,
Shreyas -
Default Values in Purchase Requisition
Hi MM Experts,
I want to set default values for Purchasing Organisation and delivery address for a particular user in transaction ME51N(Purchase requisition creation).
Can someone please advise me on how to do it?
I tried using the "Default Values" button, but the fields Purch Org and Delivery address are not there.
Thanks in advance.
cheers,
RandiHi Randi,
In ME51N, once the source of supply is assigned, the purchasing org will default to the porg defined for the vendor that is
assigned. For MRP, Purchase Organization will only be taken from the Source List. The POrg. cannot be dopted automatically due to the reasons mentioned in the Note 73241.
73241 ME51: User parameter EKO is not generated
Regards,
Purnima -
Set default value to a field in MM01
Hi Friends ,
Can anyone tell me that how can set a default value to field "Rounding Value" in tab "MRP1" when i go to transaction "MM01" . I tried to search user exit/Badi for the same but i didn't get OR can say not able to find.
PLEASE HELP ME.
THANKS IN ADVANCE.
KishorIn config, there is something called a rounding profile which I think will help you achieve what you want. Here is the path to the config task.
Implementation Guide for R/3 Customizing (IMG)
-->Logistics - General
-->Quantity Optimizing and Allowed Logistics Units of Measure
-->Maintain Rounding Profile
Here is the documentation related to that task.
<i>Maintain Rounding Profile
In this step you define rounding profiles for adjusting units of measure to match delivery or transport units.
Rounding profiles can be maintained on a general or plant-specific basis. General maintenance is recommended as this requires you to enter less data.
A distinction is made between static and dynamic rounding profiles.
A static rounding profile comprises the following:
Threshold value
Rounding value
The threshold value is the value from which the system rounds up to the next delivery quantity.
The rounding value is the value to which the system rounds up as soon as the threshold value has been reached.
Several combinations of threshold and rounding values can be defined for rounding profiles.
No logistics units of measure are taken into account with static rounding profiles. This means that the system rounds up statically to the rounding values entered in the profile and not to "full pallets", for example.
Dynamic rounding profiles comprise the following:
Rounding method
Rounding rule
Indicator to show that units of measure are to be condisered only if they are allowed for the vendor or recipient.
The rounding method controls how the system rounds off:
No rounding
Rounding to a multiple of the order or sales unit
Rounding to order or sales unit, and to logistics units
No rounding
You have to define an additional rounding rule if you want your profile to round off to whole logistics units. This rounding rule is the key used for grouping logistics units of measure. The group contains all the units to which the system can round off when using the profile.
You can also have the system include only those logistics units that are allowed for the vendor or recipient. Allowed units of measure are defined in unit of measure groups that can be used at material-vendor level or at material-plant level.
Example
a) Static rounding profile
A material has a base unit of measure of 1 piece. Purchases are made in cases (1 case = 5 pieces) or pallets (1 pallets = 8 cases or 40 pieces).
You maintain the static rounding profile as follows:
From To Rounded to
01 05 05
06 10 10
11 15 15
16 20 20
21 25 25
26 30 30
31 31 35
32 40 40
41 45 45
46 50 50
66 70 70
71 71 75
72 80 80
81 85 85
b) Dynamic rounding profile
To procure materials in lower price bands, you define rounding rules containing all pallets and cases that the relevant vendors can deliver. You enter a percentage for every pallet and case category that indicates the level to which a quantity is to be rounded up to the next unit of measure.
Rounding rule 01
Unit of measure Round up as of
Euro pallet 70% full
Pallet category 2 80% full
Case for euro pallet 65% full
Case category 2 75% full
You maintain a dynamic rounding profile using the rounding method "round to whole logistics units" and assign the profile rounding rule 01.
A material has a base unit of measure of 1 piece. Purchases are made in cases (1 case = 5 pieces) or pallets (1 pallet = 8 cases or 40 pieces). The system then rounds an order quantity of 68 pieces (= 40 + 28) to 2 Euro Pallets (= 80 pieces) because the second pallet is already 70% full.</i>
Hope this helps,
Srinivas -
Hi,
While opening "F-22" (Customer invoice), u find that the posting key for the first line item will appear by default as "01" similar to vendor invoice "F-43" , GL transaction "F-02" and so. My doubt is where do we give the default values for the respective screen?
Thanks,
ManojHi,
There is an IMG path where these default values for document processed.
Financial Accounting > Financial Accounting Global Settings > Document > Default Values for Document Processing > Define Default Values
But it is advisable from sap to not to change standard settings in IMG.
Regards
Arun
Maybe you are looking for
-
Field for resource allocation in project online
Hi, I'm running Project Pro for Office 365. I'm trying to build some Business Intelligence reports. I would like to make a PivotChart in excel where the X-Axis is the time and the Y-axis is the allocation percentage. I would have a filter to select t
-
Problem with property resource bundles
I use struts message resource to localize my jsp pages. struts message resources itself uses property resource bundles to accompolish its task.the problem arises when I try to print a message from resource bundle using: <bean:message bundle="messages
-
Working in Forms 6i Client/Server I work as part of a very small development team. Most of our program specs evolve from informal discussions, a few notes and eventually, progression onto the back of a postage stamp! We have tried to develop a more f
-
After Leopard upgrade, computer starts up fine but gets stuck at finder
I've upgraded from Tiger to Leopard. Everything went smoothly in the install. When the computer first rebooted and finder appeared, everything worked great. Then I opened my email and it asked for the keychain to be 'reset'. I clicked reset and then
-
Thanks.. SQL> define TNAME='PATIENT_AUD' SQL> define CNAME='AUD_CREATED_TS' SQL> define MINGAP=10 WITH aquery SQL> 2 AS (SELECT &cname after_gap ,LAG (&cname, 1, 0) OVER (ORDER BY &cname) before_gap FROM &tname) 3 4 5 SELECT before_gap, after_gap, (a