Default values not showing up in CAT2

Hi Guys,
Using tcode CAC1 I have configure to show the default values of Cost Center and Activity type from IT0315. But for some reason I cannot see the default values in CAT2 for any of the PERNR.
Please let me know what else I am missing.
Thanks a lot.
mini

Hello,
Make sure you mark the items you want on Defaults inside CAC1 t-code.
You have the following options and from where are they taken of:
- Controlling area -> from IT0001
- Activity type -> from IT0315
- Purchase order -> from IT0315
- Attendance/Absence type -> directly entered in CAC1
- Master cost center -> from IT0000
- Sender business process -> from IT0315
- Service master -> from IT0315
- Cost center -> from IT0315
- Wage type -> directly entered in CAC1
Regards,
Bentow.

Similar Messages

Ssrs parameter default value not showing ,when available values is binded to query dataset

I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is not showing in report preview .
Many Thanks
Chandra

Hi Chandra,
According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
the default values.
Reference:
Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Crystal report default values not showing in BOE

Hi,
In Crystal Designer 2008, we can set parameters to have a default value. When we refresh the report in Designer, the default value is the one that's automatically selected. However, once we upload it to BOE, the default value is blank and we must manually re-create them in the Default Value Properties. Anyone knows why it is like that?

Hello,
Make sure you mark the items you want on Defaults inside CAC1 t-code.
You have the following options and from where are they taken of:
- Controlling area -> from IT0001
- Activity type -> from IT0315
- Purchase order -> from IT0315
- Attendance/Absence type -> directly entered in CAC1
- Master cost center -> from IT0000
- Sender business process -> from IT0315
- Service master -> from IT0315
- Cost center -> from IT0315
- Wage type -> directly entered in CAC1
Regards,
Bentow.

Static Parameters - Default Values Not Showing On Crystal Server

First, I create a basic report with static parameters. Then I assign default values to the parameters. When I run the report in the Crystal Developer, a window pops up and I see my parameters with the default values assigned. At this point, if I run the report, it runs as expected and uses the default parameter values.
However... if I install this same report on the Crystal Server, select 'Properties' > 'Default Settings' > 'Parameters', I see my parameters but I don't see their default values, yet if I select 'View', then a window pops up and I see my parameters and their default values.
I guess I have the following questions:
1. What's the difference between 'Viewing' and 'Running' a report on the Crystal Server?
2. Why don't I see the parameter default values when I select 'Properties' > 'Default Settings' > 'Parameters' in the Crystal Server?
I see the same behavior whether I use CR Developer XI or 2008. The reports are being run on Crystal Server 2008.

Hi,
There are two modes of saving a report. 1 save your report with data (to do this go in File-- Save Report with Data check this option) 2. Save your report without data (uncheck the above said option)
I think you are saving your report without saving the data with your report. Try to save the report with saved data this will keep your parameter default values.
Viewing is just looking at your report data which was saved along with your report. 'Running' is nothing but you are refreshing your report which will give you current data.
Thanks,
Sastry

Camera Raw Defaults & Presets not showing menus (BRIDGE)

Hi There
I just upgraded to a new version of PS CS3 & Bridge and the option to apply Presets, or to Apply Camera Raw Defaults is not showing when I right click a file in Bridge. It also doesnt show up in the menu. I need to be able to Batch process hundreds of photos at a time and then convert them to Tif formats. I used to be able to do this by applying my Adobe Camera Defaults to many images at once. How do I do this now????
I am running Bridge 2.0.0975 and PS 10. Help!! This is critical for me!!!
thanks so much!

> Even if old versions are available for download, having older versions available on disk in case of malfunction is a perfectly acceptable practice.
> This applies to any update of any software.
Agreed. I have gigabytes of disk space packed full of iso's, dmgs, and zips for
(almost) all of the software I've installed on my computers. It's a pain to
manage sometimes, but I know I can go back and reinstall PS7 (for instance) if I
need to even though I have no clue where the CD is at. It's just one part of my
configuration management and backup strategy. I don't have a sysadmin to take
care of this kind of thing for me any more, unfortunately, so I have to do it
myself.
This plan also has the advantage that I don't have to be online to download
older versions from a vendors site (if it's even available) or go searching for
a seeded torrent (if it's not).
I'm not saying this approach is good for every one or even good for anyone but
me, but it is a perfectly valid way of doing things.
-X

Metadata values not showing in Site Studio layout using Idoc Script

Hi All,
We have a SS layout (secondary) with replaceable regions for showing content that is listed in a primary page dynamic list.
Part of the layout shows contribution elements of Contributor Data File content items, but part of layout also shows metadata values. We use  to show the content item Title with no problems.
However, for some content items, some metadata values are not showing on the layout - specifically a custom metadata field called xFinishDate (which is of type 'Date' in Config Man). The code  simply does not work (nothing is displayed) for some content items, despite definitely having a set FinishDate value. Some other content items show this value fine.
The  value works for ALL items, but the  does not, and there appears to be no difference between the items that it does, and does not work for. They are all CDF, same DocType, same CheckIn profile, etc.
The non-working items are all released and indexed. Their Content Information in Content Server shows complete metadata. I have resubmitted the non-working items for reconversion in Repo Man but no luck.
Is there something I am missing? Any help is greatly appreciated.
Luke.

Actually the default DOC_INFO resultset that is on the page seems to be for the content item being loaded into the secondary layout's replaceable regions. This is why DOC_INFO.dDocTitle gives the results expected.
However, I think I have discovered why the xFinishDate value was not showing. Using sapan's code (and modifying it a bit) I was able to print out all the metadata field names and values for default DOC_INFO resultset.
Using this URL as an example: http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011217
At the top of page region (replaceable) where the Contributor Data File is loaded into, the DOC_INFO resultset is relevant to the content item that is being loaded into the layout (content ID: BD3_011217 - as per the URL format), which is what we want.
However, throughout the Contributor Data File content, if a link is made using the Site Studio link wizard via FCK Editor (in the above case, it is the position description link, which is a link to a PDF) and the link is 'Link to a file' and the 'Choose Target section' is selected as 'Use default website section metadata', the resulting link looks like "http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011216". Any references to the DOC_INFO resultset on the page after the instance of this link now use the metadata of the content item referred to in the link, not the original content item. I have dumped out the DOC_INFO fields/values in different parts of the layout to prove this. The linked content item has no xFinishDate value so this is why nothing displays (displaying xFinishDate needs to happen after the link to the position description).
I guess I need to either:
- change the way the link is made to the content item to "Link to the Content Item's URL", but I would prefer not to expose the resulting path e.g. "[!--$HttpRelativeWebRoot--]groups/group-name/@account-name/documents/content-type/content-id.pdf"
- explicitly make a resultset using  with the content ID I know I want and use it instead of the default DOC_INFO one. Is there any other way to make a resultset comprising of a single item's metadata?
9.45 SS_GET_SEARCH_RESULTS
■ Description: This is a wrapper around the regular CS GET_SEARCH_RESULTS
service. It allows some Site Studio features to be specified simply as flags and have
the real query syntax be constructed on the server. It can modify the standard
'SearchResults' resultset to contain an additional column called 'ssUrl' which will
contain the Site Studio-friendly url for all of the search results.
■ Parameters:
– siteId: the unique identifier of the site (required).
– ssLimitScope: True/False, restricting scope to within the site only (optional).
– ssUserSearchText: user-supplied search text (optional).
– ssWebsiteObjectType: object type (optional).
– computeFriendlyUrls: True/False, modify results to include ssUrl (optional).
■ Returns: resultset named ’Search Results’.
■ Security: The user must have at write access to at least one security group on the
content server
Thanks to everyone for their help. Almost there!
Edited by: lukeb2112 on 18/01/2010 17:30

Rich text default values not appearing in content entry template

Hello all,
Sorry for the repost, but no one seems to have an answer for me in the other forum and I thought I might be able to reach more people here.
I have created a base text item and would like to include default values in some of the attributes. The problem is the default value I set in the rich text field is not appearing when I try to create an instance of my item type.
Is this a bug, or am I not doing something right? All of my other attributes show their default values.
Thanks in advance,
Jim

bug 3221058
Patch 4021971 for 9.0.4.1
(only available on http://metalink.oracle.com site)
Patrick.

Non-cumulative Values not showing in Inventory Management Queries

Hi:
Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

Found the problem. It had to do with the compression variant in the delta process chain. The compression was set to 'no marker update'. Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up. Reinitalized and the deltas are working correctly now.

Default Value , Not Null and EJB2.1

Hi ,
Am using Weblogic10.3 + Oracle Db + EJB2.1 Local Entity Beans .
The issue is that one of the table has createdDt which is not null and is defualt is set to Sysdate. When I try to create this Entity with createdDt null , I get an exception like below , But since I have mentioned default value , I shouldnt be getting this. Have I missed something ?
Code is quite straighforward
Organisation org = organisationHome.create();
....org.setter methods..
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-01400: cannot insert NULL into ("XXX"."ORGANISATION_T"."CREATEDDT_F")
ErrorCode=1400 SQLState=23000
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-01400: cannot insert NULL into ("XXX"."ORGANISATION_T"."CREATEDDT_F")
     at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
     at weblogic.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
     at weblogic.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at weblogic.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
     at weblogic.jdbcspy.SpyPreparedStatement.executeUpdate(Unknown Source)
     at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:159)
     at weblogic.ejb.container.manager.BaseEntityManager.executeInsertStmt(BaseEntityManager.java:763)
     at weblogic.ejb.container.internal.TxManager$TxListener.executeInsert(TxManager.java:900)
     at weblogic.ejb.container.internal.TxManager$TxListener.executeDBOperations(TxManager.java:831)
     at weblogic.ejb.container.internal.TxManager$TxListener.beforeCompletion(TxManager.java:1054)
     at weblogic.transaction.internal.ServerSCInfo.doBeforeCompletion(ServerSCInfo.java:1217)
     at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1195)
     at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:118)
     at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1302)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:2114)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:263)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:230)
     at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:621)
     at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:60)
     at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:441)
     at com.tieto.tix.core.domain.DomainServices_7p8lqs_EOImpl.createOrganisation(DomainServices_7p8lqs_EOImpl.java:7717)
     at com.tieto.tix.core.domain.DomainServices_7p8lqs_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

parmTest( , "param2") is syntactically incorrect, so there can be no "workaround".
In addition to solutions offered by SwapnilVJ and Saransoft84, you could also use a rest parameter:
function parmTest(... args)
// set up default values
var val1:Boolean=true;
var val2:String="";
switch(args.length)
case 0:break;
case 1:
   if(args[0] is String){val2=args[0] as String;}
   else{val1=args[0] as Boolean;}
   break;
case 2:
default:
   val1=args[0] as Boolean;
   val2=args[1] as String;
   break;
   trace(val1 + " " +val2);
parmTest();
parmTest("hello");
parmTest(null,"hello");
parmTest("hello",null);

How can I get a default value to show the name instead of the ID.

I have a field with with a LOV that works great! It displays first & last name and returns the ID to the field.
The problem is the users want the first & last name to automatically default in the field without selecting from the LOV. However, I still need to store(return) the ID.
Also are application users username and passwords case sensitive?

Angie, Can you provide some more details.
This is a popup LOV correct? So the field in question is the source database column or is it static or what is it currently?
I am not sure if I understand your business rule of "automatically default in the field without selecting from the LOV" if that is the case why select from the LOV.
None the less try this.. Here is what I am assuming you would like: a value is set on a previous page or throughout yoru application when you arrive on page X a LOV is there that could have it's value derived from an item on a previous page.
So your LOV query should be like this
select a,b from your_table where foo = 'abc' OR :ITEM_VALUE_OF_LOV
make sure you add the "or clause" on your query otherwise the LOV will display the numerical value in the LOV and not the display value
If your LOV source column is a database value and you want to override it in essenece with your default value you can do something like this:
set a pl/sql process on load to:
select value into :P_ITEM_VALUE_OF_LOV from table;
or you could set your source used as "only when null" and set a default value within the element as well..

Filter values not showing on iPad

Hi,
I have a BW query based universe (UNV) that is published to iPad. The WebI report runs fine in BI Launchpad. However, when I open same report on iPad, the prompt values are not show (I see only blank Blank Blank) and report is not executed. BW server is BW 7.3 BO is BO 4, SP2.
How do I fix this issue?
Regards,
Nikhil

Hello Simone,
please can you tell me, if the open document function with refresh parameter is working in BO mobile App V 4.0.3 (Build 1211)?
In the Release notes for this Version it is described how to do this:
Open Document
1. Apart from iDocID, sIDType and sDocName, other document identifier parameters are not supported
in the OpenDoc URL.
2. Apart from sReportName, sRefresh, IsM[name] and IsS[name], other input parameters are
not supported in the OpenDoc URL.
3. Session management parameter (token) is not supported.
4. Output parameters are not supported in the OpenDoc URL.
We tried to use the following link, but the report did't refresh with the correct parameters:
http://svie32sapbo1:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AfFdCbmEEvZIiVXXFLh4iPY&sIDType=CUID&sRefresh=Y&lsMWert=Alarmierung
The Part "Wert=Alarmierung" should be dynamical in future.
Thank you and regards
Wolfgang

Discount value not showing in the P.O printout

Hi,
I have created a Service p.o with 5 line items,i have entered the condition type RA01 = 10 % for all the items,
But in the P.O printout the discount value is showing only for the first 2 line items , the value is not showing for the balance 3 line items.
Any help will be greatly appreciated.
Nijamudeen.S

Hi,
if the same condition type is used for previous two line items, then this is ABAP issue. May be smartform coding is restricting to print the value for more than 2 line items. Can you seat with ABAP and check.

BCWP values not showing in CNE5

Hi,
After executing CNE5 report it not showing BCWP value in particular project only.I have checked all the necessary data like actual dates are maintained.
What could be the reason.
Please guide.
Regards
Nitin

Hi,
Thanks for reply.
I've already done that.
BCWP is not showing only for 4 projects & in other project it is giving correct BCWP value.
When we generate MIS through BW Module I am getting BCWP graph for the same project whose BCWP not showing in CNE5.
Thanks & Regards
Nitin

Variable value not showing in sql developer tool

HI,
I am using sql developer tool. when i take mouse in variable name at debugging its not showing variable value and instead showing variable name data type and owner. but in past i have used sql developer tool where when i take mouse on variable at debugging mode it shows the varable value. please tell me is there any issue in sql develper tool currently i am using.
sql developer version 2.1.0.63

Sorry - but I doubt if you will get much help for that ANCIENT version of Sql Developer.
My best suggestion is to download the current version and see if you still have the problem. There have been HUNDREDS of bug fixes since that version you are using.
Oracle SQL Developer Downloads
Take note that the current version REQUIRES a much higher JDK version than what you may be using. And do NOT try to install the new version on top of the old one.
Install the new version into a totally new folder. You will be ask if you want to import your settings from your current version.

UDF Value not showing in SQL

Dear Experts...
Here is a strange situation in my DB. I have some UDF on A/P Invoice for TAX details print preview.
UDF Values are properly showing in SAP but not in SQL in same table, Same document they are blank in SQL.
I can't understand why SQL does not showing me Value of UDF.
Regards,
Ravi

Hi Ravi,
Run below query in query generator for specific document number and check if udf values are shown or not?
SELECT T0.DocNum, T0.CardCode As 'Vendor Code',T0.CardName As 'Vendor Name', T0.NumAtCard As 'Vendor Ref. No.', T0.DocDate, T0.TaxDate, T0.DocTotal - T0.VatSum As 'Basic Value of Goods', T0.U_CENVAT As 'CENVAT', T0.U_ECess, T0.U_HSCess, T0.U_VAT_4, T0.U_Add_VAT1, T0.U_VAT_12,
T0.U_Add_VAT2, T0.U_CST2, T0.U_CST4, T0.U_CST5, T0.U_Service_Tax, T0.U_ST_ECess, T0.U_ST_HSCess,T0.TotalExpns As 'Others',T0.DocTotal - T0.VATSUM As 'Total' FROM OPCH T0 WHERE T0.docType = 'I' and T0.DocNum=[%0]
Thanks,
Neetu

Default values not showing up in CAT2

Similar Messages

Maybe you are looking for