Default varient for a particular report

hi guys,
First of all wish you all a prosperous, healthy and productive 2007.
Can anybody help me to a set a varient as a default for a particular report.
For example,
I create a new varient ztest for a KSB1 report.
Each time when go to the trascation KSB1 report I have to select my varient from path KSB1 --> Go to (Menu bar) --> Varient ---> get --> ztest(my varient)
Is there any possiblity to set this varient as default so that when i go to trasction ksb1 report the varient ztest select as default. I don't need to select the ztest varient.
Regards,
sp sahu

hi,
there r 2 options -
1)Either go to Se93 and create a new tcode and give ur variant name there..
2) u can create a small report program and submit the report (for tcode KSB1) with ur default variant like this demo code -
constants:
c_report like sy-repid value
'RKAEP000',
c_variant like VARID-VARIANT value 'YOUR_VARIANT'.
submit (c_report) using selection-set c_variante.
reward if helpfull
amit

Similar Messages

Maintaing a default value for a particular field in the selection screen

Hi all,
How to maintain a default value for a particular field in the Selection Screen of a Standard report
Regards
Ajay

>
ajay babu wrote:
> Hi all,
>
> How to maintain a default value for a particular field in the Selection Screen of a Standard report
>
> Regards
> Ajay
Create a variant for your standard program and assign this variant to the field 'Start with variant' while creating transaction code for the standard program in the transaction 'SE93'.
Regards
Rajesh.

Need a default varient for ME57

Hi Folks,
Could any one please explain how to maintain a default varient for transaction ME57? Also do explain to maintain all fields as empty while entering to ME57 expcept the scope of list and sort indicator. Say for example we maintain 3 varients for ME57 and when we enter all fields are need to be empty.
Thanx in advance.

you can go to
SPRO-MM-Purchasing-Reporting-Maintain purchasing list-scope of list-Define defult valur for transcaiton
this will take care of balnk value in all field except scope if list and sort indicator
If you want selection parameter defulat than
SPRO-MM-Purchasing-Reporting-Maintain purchasing list-selection parameter-Define defualt value for transciton.
here you can maintain for seleciton parameter.

How to disable cache for a particular Report in obiee 10g?

HI
My name is Rani .Learning obiee10g ifaced 1 interview in that they asked me like how u disable cache for a particular report?

In the advanced tab of the report, under prefix you need to mention:
SET VARIABLE DISABLE_CACHE_HIT=1;
Refer below link
http://tipsonobiee.blogspot.com/2009/06/step-by-step-to-bypass-all-caches.html
Thanks

Cache Disabling for a particular report

Hi Gurus,
Disalbling cache for a particular report will be SET VARIABLE DISABLE_CACHE_HIT=1; that should be in analytics -> advanced tab -> prefix column.
Is there any another way for disabling the cache for a particular report.
Another Solution
Add a dummy column to your report with CURRENT_TIMESTAMP in the formula. Hide this column.
Now your report will never generate cache. (CAN ANY ONE EXPALIN THIS IN DETAIL).
Thanks,
kumar

You can go for CURRENT_TIMESTAMP or Now() these both return the timestamp of report execution (more or less). So there are more chances for not to hit the cache.
What makes you to go with other than the below? this also proven one with no doubt can go for it.
SET VARIABLE DISABLE_CACHE_HIT=1;
if helps pls mark

How to set custom widths for a particular report column?

how could I set a custom width for a particular report column? Is there a way to do it using css?
Thank you.

Hi Leland,
I have tested this here: [http://apex.oracle.com/pls/otn/f?p=267:18]
All I have done is add the following into the report's Region Header:
<style type="text/css">
#apexir_EMPNO {width:200px}
#apexir_ENAME {width:200px}
#apexir_DEPTNO {width:200px}
.apexir_WORKSHEET_DATA TR TD {height:100px;}
</style>The headers have all be set to be left-aligned. Each column should be 200px wide (even though I'm setting the width on the headers, it will be applied to the entire column unless a cell's contents is wider, in which case the column is made wider). The final entry above adjusts the height of all TDs within the IR table.
Andy

How to change the utilised join for a particular report

Hi,
I have a discoverer report which is very similar to a previously developed report. I copied the report and now I want to change the join that is utilised by the new one (Two different joins exist between the two folders being used). How can I do this?
In the report items tab under selected items in edit work sheet I can see the different joins and the one it is currently being used is ticked, i can right mouse click on the joins but the options to add/remove from worksheet are disabled (Greyed out)
Can anyone tell me how to do this?
Thanks in advance
Keith

Short answer - I'd recreate the new report.
Long answer - I'm not sure if 10g handles this differently, but I've seen many a Disco 4 report that somehow has a 'memory' that you just can't get rid of.
For example, if you chose some items from one folder and some others from another folder due to a join, then you deleted all those 2nd folder items, and chose from a third - and you absolutely, positively (thx. fedex) know that there's nothing referring to the original 2nd. folder (ie: no conditions, calculations, functions, etc.), you may very well still see the original 2nd. folder being referred to in the SQL. Sounds strange but it does occur.
So, again, if 4.x, then for sure I'd start from scratch for the new report. If 10.x, I'd probably still start from scratch as even if fixed, I've just seen it screw up my day too many times in the past to try to copy something that probably only takes 15 minutes of recreation work.
Russ

Default Setting for Genenral Ledger Report

Hello,
While i am running General Ledger Report for G/L system show defaul subtotal for daily, Monthly and Yearly. Is there any setting available so that report shows default yearly total only.
Regards,
Arpit Shah

Hi,
This is the default functionality of B1.After running the report only you can uncheck the daily,monthly and yearly sub-total.
If you are fed up with time taken to uncheck and refreshing data,you can create SQL query.

How to force an agg table for a particular report?

Hi,
We have a report which shows duplicate records from the same table. we assume that this is because the report is hitting the fact table instead the agg table.
Is there any way to force the report to hit the Agg table and not the fact?
We have tried :
1. content level tab option
2. Number of elements in the dimensional hierarchy

Hi,
For eg, Consider three tables
F_Sales_y (Summary at Year level)
F_Sales_m (Summary at Month level)
F_Sales (fact day level)
Do the joins at physical layer, In BMM use the other two tables as source inside F_Sales.
Set the cotent level for the summary facts F_Sales_y (year), F_Sales_m (month).
now based on the dimension level the corresponding the bi server will choose the corresponding fact.
Also check this post,
http://obiee101.blogspot.com/2008/11/obiee-making-it-aggregate-aware.html
Thanks,
Vino

How to determine the time duration of each job for a particular report

Hi guys,
I am facing a very interesting problem which I want to share with all of you-hoping to get some input from you
enlightened fellas :).
I have vendor and vendor sub-range maintained in one custom table. For each vendor I have got article site combination maintained in another table. The thing is I have to execute this program in background. Now for each vendor I may have only 1 article or multiple articles. So if I schedule the job for 60 min. say then for 1 article the time alloted will be too big and for multiple articles the time alloted may prove to be too small. Another thing from a functional point of view is a vendor which has 1 article today may have more articles added to his name tomorrow (if the customer likes his product the company may buy more from him). So the point is we have to dynamically adjust the time alloted for each job.
I could not find any utility in ABAP which can do this.
Can any of you please help me?
Thanks a lot !
Hasso.
Edited by: Hasso14 on Apr 28, 2011 3:06 PM

Exaactly-only I want to find the best time needed to finish for an article or multiple articles i.e I do not know how many articles will be available for each vendor beforehand before doing a select on the 2 tables. But once I know the number (maybe 1 or more than 1) I want to allot the best time for that article/lot of articles(maybe JOB_OPEN technique ?).Also the number of articles may vary over time so the algorithm should take care of that too.-quite a tricky prob :)-I would request the others to see this reply which I think will clarify their doubts.
Edited by: Hasso14 on Apr 28, 2011 9:03 PM

500 Internal Server error for a single report in a dashboard

Hi All,
I had an issue with a report in a dashboard i.e.., In a dashboard a report is prepared by using the opaque view. When I ran the report in a dashboard it ran for about 15 to 20 mins and the report is excuted with the data. Now I tried to downlaod the data for that particular report into the excel sheet by using the option Download to Excel. At this stage after 5 mins I am facing the Internal serevr error. But strange behaviour is that it downloads sometimes and sometimes it does'nt. One more important thing is that I tested the query in backend and it took around 6 to 7 mins to fetch the data. The total no of rows for the query is only 166. So can anyone please give me some suggestions or we can have a discussion as this report is behaving strangely. One more thing I forgot to mention is that they used session variables as parameters in the query for two fields which they used in the opaque view to build that report.
Thanks,
Sandy

Hi Arun,
where can i check with that whether in DEV/PROD system...?
I don't have access to PROD system and SU01 system too.
Can you please guide me with the steps to get it done.
Please check the below log which is getting displayed for the User, when he is logging in.
Error summary
While processing the current request, an exception occurred which could not be handled by the application or the framework.
If the information contained on this page doesnu2019t help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUSage.java:348)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java.245)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
u2026 59 more
Please provide me any help.
Thanks in advance.
Regards,
Ponneswari A.

Extracting the Logical sql query for the specified report in OBIEE 11g

Hi ,
I want to extract the logical SQL Query for the Particular report in OBIEE 11.1.1.5.
Any pointers related to this will be very helpful.
Thanks,
Sonali

for a try please add Logical sql view to ur report it will dispaly the Logical sql for that Report..
Hope it will helps you.

Cannot set default programs for a file extension in Gnome

After a gnome upgrade (cannot remember when), I can no longer set the default program for a particular file extension by right clicking the file in nautilus -> going to "properties" -> going to "open with" tab -> highlighting a program -> pressing "set as default".

The program I was trying to set was totem for default video playback; wine had made windows media player the default player prior. Interestingly, once I installed gnome-mplayer; the default program changed to gnome-mplayer and I was then able to switch default programs. This error may be related to wine.
Last edited by Bluerider (2013-07-05 23:07:59)

How to find the transaction code for the particular program or include

Dear All,
Please help me on this queary.
1) How to find what is the transaction assigned for the particular Report
2) How to find the particular include is used in which programs and also transaction codes
I have one ZProgram that contains only includes no selection screen, I have to find where this program is used, in that one include is ther I would like to know in which program and in which transaction that is used,
They have given ME9F, ME21N/22n, wheren this includle is calling.
Please kinely help on this.
Thanks and Regards,
Muralikrishna

HI
1. you can find the transaction for your report by opening in se80. On the left side window it will show the transaction if there is any.
2. to find in which programs particular inclue is called , just open include in se38 and press where used list icon. in the pop up window select programs.
regards
vijay
reward points if helpful

Permission to view particular report only in SharePoint 2013

Hi,
How to setup the permissions in SharePoint 2013 for a particular report for a particular user?
The report is of SSRS 2012 with SharePoint mode.
We have many folders containing different reports. We are trying to provide access for a particular user to a particular report alone. But we are not able to do that. the following are the ways we tried,
1. Providing READ access to the Report Folder (Unique Permissions)
2. Providing READ access to the Report RDL (Unique Permissions)
but nothing helped...
If you have achieved providing access to a particular report in SharePoint 2013 please share us the solution -Thank you!
--------------------------- Radhai Krish | Golden Age is no more far | --------------------------

http://msdn.microsoft.com/en-us/library/ms156034.aspx
Check if below helps
To add a user or group to a system role
Start Report Manager (SSRS Native Mode).
Click Site Settings.
Click Security.
Click New Role Assignment.
In Group or user name, enter a Windows domain user or group account in this format: <domain>\<account>. If you are using forms authentication or custom security, specify the user or group account in the format that is correct for
your deployment.
Select a system role, and then click OK.
Roles are cumulative, so if you select both System Administrator and System User, a user or group will be able to perform the tasks in both roles.
Repeat to create assignments for additional users or groups.
To add a user or group to an item role
Start Report Manager and locate the report item for which you want to add a user or group.
Hover over the item, and click the drop-down arrow.
In the drop-down menu, click Security.
Click New Role Assignment.
5. In Group or user name, enter a Windows domain user or group account in this format: <domain>\<account>. If you are using forms authentication or custom security, specify the user or group account in the format that is correct
for your deployment.
6. Select one or more role definitions that describe how the user or group should access the item, and then click
OK.
7. peat to create assignments for additional users or groups.

Default varient for a particular report

Similar Messages

Maybe you are looking for