Default View in Lead View

Hi All,
Upon clicking on 'Lead' in the NavBar of ICWC, I'd like the default view to be 'Business Context' instead of the existing 'Overview'.
I know the view can be substituted at runtime. But can I know the steps to do so?
Thanks

Then mark the threak like solved

Similar Messages

In Fact Sheet, Open Leads View is displaying all Leads

Hi Gurus,
I have configured Account Fact Sheet(BP_Account_FS).
I have added view "Open Leads", which should "display the last n leads that have status "open" or "in process".
But In my case "Open Leads" is displaying all the Leads, which have status "Converted" & "Rejected" also.
Anyone has come across with this. What are your suggestions?
Thanks & Regards
Rohan

Hi,
Raised an OSS, there was a programming error, so a new SAP Note has created SAP Note No. 1319703.
Thanks & Regards
Rohan

Entry view posting key not defaulting to General ledger view

Hello guys,
I did a downpayment to my vendors account with assignment to asset under construction and noticed that the posting key of the bank accounts line did not default to the GL view.So instead of a credit to the bank i have a debit to the bank in the GL account.
However the entry view of the transaction is consistent with what was posted.
Entry view
Cr Bank account.    100
Dr vendor account._100_
    Balance                0
GL view
Dr Bank account                                         100
Dr Vendor alternative reconciliation account 100
     Balance                                                 200
The entry view is correct but whats in the gl is wrong.Can someone please help .
Regards

Hi Banji,
I am also facing the same issue. Would be great if you can let me know how you were able to resolve it.
Thanks,
Abhinav
Edited by: Abhinav Gunjan on Jul 9, 2008 8:49 PM

Preview has defaulted to 2 page view, how do I change it?

My Preview has defaulted to 2 page view, how do I change so that it opens PDFs in single page view?
Obviously I can do this every time I open pdf but that's crazy. I can't seem to find any preference files to delete.
Preview Version 4.2 (469.5)
Any ideas ?
thanking you very much in advance...

Welcome to the Apple discussions.
If nobody comes up with an easy adjustment, when Preview is not loaded, go into your library/preferences and rename com.apple.preview.plist and com.apple.preview.ImageSizingPresets.plist. Bring up Preview and you should be back to it's basic defaults, as it will recreate those files when it loads. If everything is OK, go back and drag the renamed files to the trash.

How to default printing to details view

I upgraded to 10.8 and now every time I print, it defaults to the small window whereas I want the Details view of the print menus by default. 10.6 used to be in Details mode all the time; how do I make it use the Details view of printing options?

If I click on the Show Details button in the print window on my system (10.8.4), it shows the details view in the print window. Once I do that, the next time I print from that same application, it defaults to the details view.
It doesn't default to that if I try printing in a new application that I have not clicked that on though.
When you click on Show Details in the print window and then print again from that same application, does it open with the details view?

Authorization - Restrict to view non-leading ledger only

Dear Gurus,
Is it possible to allow users to have access to view non-leading ledger only and not main ledger?
However, at posting, we will want users to still have access to post to main ledger.
Appreciate your expertise on this!
B Regards,
Wong

Hi Atif,
Thanks for the response.
I tried that but it is now telling me that I need to provide the leading ledger authorization too.
Any idea why?
We will like to only provide non-leading ledger authorization for displaying reports.
Regards,
Wong

What is the diffrence between SAP View and CAD View ?

What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
Raj

Hello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K

How Do I Get A Split Screen View? (Two views in the main window)

I basicly want 1 UIView at the top and then below another UIView. How would I go about doing this? I need to be able to execute methods to it like -(void) viewDidLoad.
my iPhone app
First view
Second view
How do I do this?
If you could explain in detail that would be great.
Thanks so much.
Note:
I have tried inserting 1 extra view (Into the view that starts up with your app. Reason I only put in one view is because, I dont need 2 really. How I mean by two is 1 extra view and the default view that was there anyway) and in interface builder clicking on the view I have just dragged in, then clicking on: File > Write Class Files. But I colud not execute code to it for some reason. (For example I could not use the classes made with the Write Class Files. If I put the -(void) viewDidLoad method in with an NSLog it would not run.)
Help?
Thanks allot!
Im using Xcode 3 By the way.

Well, yeah. Im really sure. There is no other way I want it.
I want to have 2 views in one window.
The reason why, is so I can have a Core Plot view at the top, and just the bog standard UIView at the bottom (But I know what to do with Core Plot aslong as I know how to get 2 UIViews both with working view controllers).
My main question basicly is that fact that I want to be able to have a secondviewViewController with all the right IBOutlets like dataSource to make it work.
Thanks alot.

Dreamweaver CC crashes when switching from code view to design view

I am experiencing a recent problem with a file I am currently working. When I switch from code view to design view Dreamweaver crashes and requests a shut down. Other files seem to work without a problem. This particular files has 3 cascading EdgeAnimation CC files that are selected by media queries. I can test the page online without a problem but not in design or live view.

Since your new page didn't crash, this leads me to believe that you have some critical errors and/or conflicts in your other page(s).
Try running your code through the W3C validation tools.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Also debug JavaScript.
JavaScript - http://www.jslint.com/
Nancy O.

Switching from text view to visual view in SharePoint Designer 2013 crashes 100% of the time

Whenever I am in SharePoint Designer 2013 and try to switch a workflow from text view to visual view, SharePoint Designer crashes. Text workflows work fine. I have tried any of the solutions that I could find including:
- Removing KB2837633 and 2768006 (neither were installed)
- Installing SharePoint Designer 2013 SP1 (KB2817441)
- Performing a "Repair" on both SharePoint Designer 2013 and Visio 2013
- Clearing the caches in the AppData directory
- Setting Visual as the default mode for workflows to open in (so, not exactly switching, but trying to open it directly in the visual view)
Event viewer reports that it is an issue with Microsoft.Web.Authoring.ni.dll which throws an unhandled exception, System.AccessViolationException.
This is the error message:
System.AccessViolationException was unhandled
HResult=-2147467261
Message=Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Source=Microsoft.Web.Authoring
StackTrace:
at Microsoft.Web.Authoring.Workflow.XamlWrapper.GetStageInfo(UInt32 node, String& name, UInt32& transition, UInt32&
stageContainer)
There is no InnerException.
Can anyone suggest something else to try?
Thanks!

Hi,
I have checked out the links above to no avail. I will keep looking. I have included the details from event viewer below.
Details from event viewer:
Event ID 1001
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: SPDESIGN.EXE
P2: 15.0.4569.1503
P3: 52b0b061
P4: Microsoft.Web.Authoring.ni.dll
P5: 15.0.4531.1000
P6: 51cb6bd8
P7: c0000005
P8: 0012f4b8
P9:
P10:
Event ID 1000
Faulting application name: SPDESIGN.EXE, version: 15.0.4569.1503, time stamp: 0x52b0b061
Faulting module name: Microsoft.Web.Authoring.ni.dll, version: 15.0.4531.1000, time stamp: 0x51cb6bd8
Exception code: 0xc0000005
Fault offset: 0x0012f4b8
Faulting process id: 0xc3c
Faulting application start time: 0x01cf69f7dfc05fc8
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\SPDESIGN.EXE
Faulting module path: C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\Microsoft.W7830ee34#\bed75c80b5bf64ca619a88ad4a48b674\Microsoft.Web.Authoring.ni.dll
Report Id: 45c4e398-d5eb-11e3-8ff3-7054d21a367e

When I click on a picture to enlarge it on a web page ( any webpage),a new blank page opens with nothing.It only syas search bookmarks and history.What do I have to do to view an enlarged view says

Using Firefox to search a web page.
When I click on a picture to enlarge it on a web page ( any webpage),a new blank page opens with nothing.It only says" search bookmarks and history".
What do I have to do to view an enlarged view ? What settings do i have to enable in firefox.
Any help would be appreciated
Colincolin30

See:
* [[Images or animations do not show]]
* http://kb.mozillazine.org/Images_or_animations_do_not_load
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Pass value from 1 view to other view

Hello Friends,
I am new to ABAP dynpro, I am working on one sample program. I have created 2 views, in 1st view I have 2 input fields and go button. In second view, 1 input field and 'back button'. I want to enter 2 numbers in 1st view and multiply it and display it in 2nd view.
Please help to achieve this functionality.
Thanks,
Shreekant

Hi Radhika,
Sorry for troubling you.. Here is the code I have written for OnAction on Button. (for view1(input_view))
method ONACTIONGOTO_RESULT .
DATA lo_el_context1 TYPE REF TO if_wd_context_element.
DATA ls_context1 TYPE wd_this->element_context.
DATA lv_zint1 LIKE ls_context1-zint1.
get element via lead selection
lo_el_context1 = wd_context->get_element( ).
get single attribute
lo_el_context1->get_attribute(
    EXPORTING
      name = `ZINT1`
    IMPORTING
      value = lv_zint1 ).
DATA lo_el_context2 TYPE REF TO if_wd_context_element.
DATA ls_context2 TYPE wd_this->element_context.
DATA lv_zint2 LIKE ls_context2-zint2.
get element via lead selection
lo_el_context2 = wd_context->get_element( ).
get single attribute
lo_el_context2->get_attribute(
    EXPORTING
      name = `ZINT2`
    IMPORTING
      value = lv_zint2 ).
Multiply 2 numbers
data: l_data type int4.
clear: l_data.
l_data = lv_zint1 * lv_zint2.
wd_this->fire_go_to_result_plg( ).
endmethod.
>>> In the above code, I have stored the value in l_data, which I want to populate in result_view.
If I use 'wd_this->fire_go_to_result_plg( ).' in above code, it will go to result_view, but no value is populating.
Please can you provide me the sample code to achieve it...
OR, also let me know if any other simple method to achieve this functionality.
Thanks for the help.
Regards,
Shreekant

Add a simple switch to PDF Reader to change between MY-VIEW and ORIGINAL-VIEW

I would like to open pdf file with my same default viewing preference *every single time* that I open a PDF file, regardless of what the original document creator set as the default view. It would be nice to have a SIMPLE switch between MY-VIEW and ORIGINAL-VIEW. It's very frustrating to have to keep switching my view preferences every time I open a new file with a different default.

Thank you Bernd, but that is only part of the solution. For example, I do set the Page Layout to 1-page-continuous. MOST of the time it keeps this setting, but some documents either override that setting, or perhaps it reverts back to a default (maybe with version upgrades?). The other part is that I always want the menu-bar and toolbar to show up. Some documents hide these when they open. I realize that I can hit [F8] and/or [F9] to toggle these, but there are additional settings. I also want to always have the selection tools available, etc. Bottom Line: I just want a collection of settings that I can call up with a single, simple shortcut or button, so I don't have to perform multiple steps just to get the tool back to my standard configuration whenever something changes it.

How can the info block be assigned with the view and assign view to users.

Dear Friends,
Anyone could plz tell me how can the info block be assigned with the view and assign view to users. Also how can the info block in sale summary be assigned with a view and how to assign this view for user.
Regards,
Ashima

Hi,
To define view and to make it default
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Define Reporting Views (Tcode:OVCD).
To assign default user to the view.
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Default View To User (Tcode:OVCC).
To assign Elements of SAPScript "SD-SALES-SUMMARY" to information Blocks To A View use
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Information Blocks To A View (Tcode:OVCB).

Recreation of Info-Views as Business Views

Hello,
We have been running reports on Crystal 7 (Seagate Info 7) and have installed BOXI R2 and managed to migrate the reports to Crystal XI. Just not sure if we have done this in the most effective way and if issues can arise from how we have set up the data sources.
There was no direct migration tool to bring the reports onto the new system. Moreover, we work on a Baan IV database and have had some issues trying to use the Universe Module and so have are using Business Views.
The old reports were using info-views, we recreated the these info-views as business views on BOXI. In doing so, we made a data foundation including all tables and links as to accommodate for the tables needed by the all of the info views. From there, we created appropriate business elements, specifying the fields used. And finally, the respective business views. By changing the datasource (Database -> Set datasource location) we were able to use the same reports as before but through the business views.
We put all of the tables and linked them inside of the same data foundation. We figured the benefit was that in the case we needed to create new business views that we would have access to any table we wanted. So the question is, does this lower the performance (take longer to run reports) or possibly cause problems with data integrity? Should we have migrated the reports another way?

I am configuring the SNC settings now.
BI is 64 bit
Bobj is 32 bit non IA server.
During this process I need to install Win 32 bit sap crypto lib in my system. After that there are profile settings in BI which need to be made which conflict with the existing SSO configuration:
Current settings in default profile:
snc/identity/asp:SAPServiceDB1@domain name snc/gssapi_lib        C:\WINDOWS\ime(x86)\gx64krb5.dll
New parameters to be created in the instance profile as described in the BOBJ documentation:
snc/identity/asp:CN=DB1, OU=SAP, O=domain name, C=US
      snc/gssapi_lib E:\usr\sap\DB1\SYS\exe\run\sapcrypto.dll
The main issue with be the library dll.
One more thing.
The SAP crypto library nees to be installed on the SAP server (64bit) and the BOBJ server (32bit). I was unable to locate a 32bit version for Windows x86. There is a x86/IA32 version but unknown if this is
compatible.
The IA32 reference is usually specific to itanium servers which we do not have.
Please advice.
Thank you,
Padman
Edited by: Padmanaban on Nov 14, 2008 5:02 PM

Default View in Lead View

Similar Messages

Maybe you are looking for