Default wagetype in Basic pay infotype that depends on payscale type

Hi,
Just want to ask if there's a way to default different wagetypes in basic pay infotype that depends on person's pay grade area and pay grade type? Defaulting means I will not choose the wagetype in the pay group but when i choose a specific pay grade area and pay grade type the system will automatically populate the wagetype in basic pay infotype. I've tried using feature LGMST and table V_T539A but this way it is limited to employee subgroup and not by pay grade area and pay grade type.
Hope you can help.
Thank a lot.

Hi,
Note: It is not adviced to deviate from the standard or Best Practice.
>You can copy the LGMST feature, customise pay grade area and pay grade type fields in the decision operation structure to address your requirement. Please test the consequences before implementing.
Regards
Chandrashekar

Similar Messages

Regd Wagetype and basic pay from 0008 thru internal table in smartform..

Hi,
I have a requirement where i have to display in my smartform the values for basic pay and different wagetypes from infotype 0008. In my smartform for 1 employee, only those values of wagetype and basic pay should print which are maintained in 0008. If no value then it should not display in my smartform at all (No even like 0.00).
For this i have made an internal table in my smartform. Plesae advice how can i pass these vales in my smartform.
Note* - There is a filed in my custom inftyope 9003 - "Salary details as on (P9003-ZZDATE1). The value for basic pay and wagetype should be less than or equal to this date.

Hello Preethi,
From your thread ,what i understood is that you have created a able in the smartform.right?You can loop this table and put a condition for checking whether there any records in the internal table.
Hope this will help you !!!
Reward points if it found useful!!
Regards,
Manoj.

Very Urgent...Indirect evaluation symbol 'I ' in basic pay infotype..

Hi Friends,
what is the meaning of 'I' in IND Val field ,which comes with some wagetypes only, in Basic pay infotype.
If 'I' is there in the field it is not storing the value in a table so there is a problem with the calculations for some developments.
how to restrict that 'I' in basic infotype ?if we restrict that will there be any effect in the other areas?
very urgent..appreciate any help..

Hi Nandita
'I' means indirect evaluation of the amount for the wage type. So, if you enter any value, then the amount limit will be computed from using IT0008 or IT0052 and checked with the value entered and 'I' will be removed. If you do not enter any value, then the amount for this wagetype will be computed by SAP function module.
You can check the table T511 and for Wage type where MODNA is not initial are indirect wage types.
Thanks
Navneet

Maintaning HRA in Basic pay infotype

Hi Friends,
We would like to maintain HRA without entering the value in 581 infotype.
But it not allowing us to maintain like that..can any body let me know the dynamic action is existed for this.
Any body can help out on this..
rewards will be given for the helful answers.
Thanks
Nanditha

Hi Pinaki,
My client doesn't want to maintain any tax exemption for HRA thru the 0581 infotype..He wants to enter it directly in the basic pay infotype as we enter the other wagetyeps like baisc, conveyance , food allowance etc.
eventhu I created the wagetype for HRA it is not taking up directly into the basic pay infotype.we need to maintain the 581 infotype..otherwise the HRA will not be updated in the basic pay infotype.
can u help me out on this.
Thanks
nandita

Function Module Error In Uploading Data for Basic Pay Infotype

Hi All,
I'm trying to upload data into Basic Pay Infotype 0008 Using LSMW Subtype 0(Basic Contract). While we are trying to input values into ANSAL(Annual Salary) field directly using default wage type as 1000.
We are gettting a error in function module RP_ANSAL_FROM_WAGETYPES.
and eventhough we are inputting values into ANSAL field it is taking it as 0.00 by default .
Kidly suggest me solution.
Thanks,
Vasanth

Hi ..
check this
765785
673372
730976
note 1032950
http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/content.htm
Message was edited by:
hari kv

Problem in getting default value for Basic Pay

Hi gurus,
i have created a new structure in fresh new sap server for payroll.
after completing configration. when i hire an employee system , it gives an error
on info 8. It did not pick the value from t510 table.
please response it is urgent.
Nawaz Khan

Hi Nawaz
First of alll you have to check the configuration part in the basic pay ( PM>PA>Payroll Data> Basic Pay> Check Wgetype Charateristics. There you can find one screen where you have to modify the indirect valuation module according to the requirements. Then come to PA30 and enter IT0008 for some person and check.
Cheers
Vijai

Changes not seen in Basic pay infotype

Hi Experts,
I have faced the following issue:
Dearness Allowance component that was set as Rs. 500 for a particular period (say Mar2008 to Apr 2010) was changed to Rs.750 in between the period (say Aug 2009).
The set of employees need to be assigned to the updated amount. Running the program 'pc00_m40_dab' for the same says, "Has run successfully". But I don't see the updated result in IT008.
Not sure if there are related settings in 0008. Pls provide your inputs.
Regards,
Ash

DA CONCEPTS
below steps may be useful to u
Prerequesties for VDA Calculation
1.Allowance grouping should exsist
2.VDA component should be maintained for the vda applicable employee
Major Table to touch the configuration (U can access table using sm30)
1.V_T7IND1-ext descrption for index code
2.V_T7IND3-Index code for various consumer price indices-Give the date (Current date) on
every change in VDA you have to mention the data of effect here only.
3.V_T7IND5-Basic slab id for Dearness allowance determination
4.V_T7IND7-Pay scale grouping for allowances-Important step give ur allowance grouping and also
Give the std wage type Fixed da -MD10 and Vda -MD20
5.V_T7IND9-Reference code for various consumer price indices
after all the above things in backend
Give the T CODE :PC00_M40_DAB
In the screen give the effective date given in the V_7IND3 TABLE and execute
Those persons having md10 component in infotype 8 is being processed and u can see the o/p
use sm35
and run the batch input session which will upload in infotype 8
BASIS SLAB BASIS is another techinic which u can update vda according to the basic salary
of employee
say for example those u are drawing <3000 500 vda
3000 750 vda
it can be given in squence number in v_t7ind5 table and the same can be linked to V_T7IND7
table.
Hope i reached u
with regards
partha
keep sharing and learning

Changing infotype Basic pay (IT0008) and then park it!

Hie Guys!
We doing an implementation for a public service utility and these guys need tight authorisations on their salary reviews before they are taken as effective! One thing they want to happen is for a user to change a record linked to salaries like the Basic pay infotype, park it in the system before saving it and then one or two Super users has a look into it before it is passed on as effective.Meanwhile they would want the employee's basic pay to still be at its previous level until they authorise it!
Please any GURUS out there give me a hand and sort this one out!
Tazkkl.

Hi,
Authorization objects enable complex checks of an authorization, which allows a user to carry out an action. An authorization object can group up to 10 authorization fields that are checked in an AND relationship.
For an authorization check to be successful, all field values of the authorization object must be maintained accordingly. The fields in an object should not be seen as input fields on a screen. Instead, fields should be regarded as system elements, such as infotypes, which are to be protected.
You can define as many system access authorizations as you wish for an object by creating a number of allowed values for the fields in an object. These value sets are called authorizations. The system checks these authorizations in OR relationships
Structural Authorizations
Structural profiles are assigned in a different way to general authorization profiles. To assign structural profiles, you use table T77UA (User Authorizations = Assignment of Profile to User), not Role Maintenance (PFCG transaction) as with general authorization profiles. The authorization profiles are specified in the T77PR table (Definition of Authorization Profiles).
You can protect (sub) structures by making relevant entries in this table
A useru2019s Overall Profile is determined from the intersection of his or her structural and general
authorization profiles, when you use both structural and general authorizations.
The structural profile determines which object in the hierarchical structure the user has access to; the general profile which object data (infotype, subtype) and which type of authorization (Read, Write, ...) the user has for these objects. The access mode for authorization objects in HR Master Data is determined in the AUTHC field (Authorization Level).
Steps to do Structural Authorization:
Step1: TC OOAC (table T77S0)
Activate the Structural Authorization switch
Step 2: TC OOSP
Create Structural Authorization profiles
Step 3: Assign Structural Authorization profile to user Id
Transaction Code: SE38 and assign report RHRPROFL0 enter object id for example (Organization unit)
Assign regular Role authorization
Table - T77UA (User Authorizations = Assignment of Profile to
User), not Role Maintenance (PFCG transaction)
The Table T77Pr - authorization profiles are specified in the T77PR table.
You can protect (sub) structures by making relevant entries in this table.
Rupa Prasad

How to create a basic pay wage type without copying from another wagetype

Hi Gurus,
How to create a "New Wage Type" without copying from another wagetype?
& i want this wage type "Non Taxable" as per my organisation requirment.
pls send me config docs on my email id. Pls it is very urgent
Email: [email protected]
Pls Help me
Regards
MHPO

Hi Ram,
Thanks
One more thing should i create "Non taxable payment wage type" in Basic Pay.
in Basic pay there is no any wage type copy Non taxable Wage type but Additional Payments there is one Copy Wage type name is "M400 Non taxable payment"
i check the all config related setting related to M400 non taxable payment
can i copy in Basic Pay any wage type & create new wage type (xyz)
& i change all setting eg processing class & all is similar in (XYZ) =M400
its is ok or not

Subtype in infotype 8(basic pay)

Hi experts..
I have one question.What is purpose subtype in infotype 8.
Thanks in advance.

The subtype on Infotype 0008 is used to specify the Payment type. pl read the following <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/3a/1a5204304e11d2958f00a0c9308b52/frameset.htm">SAP Help</a> for additional info on the Basic Pay infotype.
Arya

Update three wage type out of seven wage types in Infotype BASIC PAY(0008).

Dear All SAP HR Experts,
I am trying to create LSMW to update 3 wage types amount out of total seven wage types.But it was not update amount after creating LSMW.
Please suggest.
Regards,
Mahendra
Pune

Remi,
Are those 3 WTs in IT0008 indirectly valuated (through Salary Grids in T510) or do they require manual input of the amount (direct valuation) ?
Ans Wage type calculation rule already defined,only we have to put wages standard amount in basic pay infotype. for all employees.It will diectly calculated amount according to their attendance data
Are those 3 WTs always in the same position (ie. Lines 2, 5 & 7) in the IT0008 of all the employees ?
Ans:Yes, they are in same line(4,5,8,9) and positions for all employees.
regards
Mahendra
Pune

Multiple currencies in basic pay

Hi all,
our client keeps uses the basic pay infotype only as information (no payroll). They want to be able to use multiple currencies in the different wage types (e.g. one in USD, the other in EUR).
Is this possible ?
thanks in advance !

I too agree with our friend.
It is not possible to use two different currencies in Basic Pay.
I think it not possible in SAP standard.
i assume your client is using IT0008 for reporting purpose to solve this You can create 'Z' table pass IT 0008 values to that table. Write reports based on that table.

Positive time and basic pay

Dear All,
What will happen to basic pay (infotype 8) when the employee has clock time of 3 hrs and his planned working time is 8 hrs for the day
(processing class reduction factor 10 set to 1).
regards
NKMP

1. Are you using clock in / clock out. If so is this 3 hrs is after reqular schedule or during the regular schedule
yes using clock in / clock out. 3 hrs during the regular schedule. employees worked less time
2. Are you using standard timeschema? yes
3. If you say the employee is salaried, what are the wagetypes you are maintain in IT0008?
basic, hra, special allowance
now since he had clocked in less time for the day. How his basic,hra, special allowance will be calculated
regads
NKMP

Need help in basic pay retrival

hi frends,
how to retrieve the data from BASIC PAY(infotype 0008)?????????????
need it urgently

Hi
use the code
form get_pay_data.
Get the Payroll data from Respective Infotypes
rp_provide_from_last p0008 space pnpbegda pnpendda.
pay_tab-pernr    = pernr-pernr.
call function 'RP_FILL_WAGE_TYPE_TABLE_EXT'
    exporting
     appli                              = 'E'
     begda                              = p0008-begda
     endda                              = p0008-endda
     infty                              = '0008'
     objps                              = ' '
     tclas                              = 'A'
     pernr                              = pernr-pernr
     seqnr                              = '   '
     subty                              = '0   '
     dlspl                              = 'X'
     msgflg                             = ''
     nordct                             = ''
    tables
      pp0001                             = p0001
      pp0007                             = p0007
      pp0008                             = p0008
      ppbwla                             = wage_tab
PP0230                             =
PP0014                             =
PP0015                             =
PP0052                             =
EXCEPTIONS
ERROR_AT_INDIRECT_EVALUATION       = 1
OTHERS                             = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at wage_tab.
    pay_tab-waers = wage_tab-waers.
    case wage_tab-lgart.
      when c_lga01.
        pay_tab-basic = wage_tab-betrg.
      when c_lga02.
        pay_tab-sup_allow = wage_tab-betrg.
      when c_lga03.
        pay_tab-hra_allow = wage_tab-betrg.
      when c_lga04.
        pay_tab-chl_allow = wage_tab-betrg.
      when c_lga05.
        pay_tab-soc_allow = wage_tab-betrg.
      when c_lga06.
        pay_tab-fix_allow = wage_tab-betrg.
      when c_lga07.
        pay_tab-ra_allow = wage_tab-betrg.
      when c_lga08.
        pay_tab-per_allow = wage_tab-betrg.
      when c_lga09.
        pay_tab-pen_allow = wage_tab-betrg.
      when others.
        pay_tab-oth_allow = pay_tab-oth_allow + wage_tab-betrg.
    endcase.
    pay_tab-tot_allow = pay_tab-basic + pay_tab-sup_allow +
                        pay_tab-hra_allow + pay_tab-chl_allow +
                        pay_tab-soc_allow + pay_tab-fix_allow +
                        pay_tab-ra_allow + pay_tab-per_allow +
                        pay_tab-oth_allow - pay_tab-pen_allow.
endloop.
append pay_tab.
clear pay_tab.
endform.          "get_pay_data
Reward points if useful
Regards
Anji

Hiring - Create Basic Pay

Hi,
While performing an hiring action, in Create Basic Pay I am encountering an error message - 'Salary/Grade Band does not match with pay scale grade of the position'.
Regards,
Anantha

Hi Anantha,
Go to PO13 and check the planned compensation for the position. This planned compensation suggest the default value on Basic Pay IT0008.
http://help.sap.com/saphelp_di46c2/helpdata/EN/66/9bb8923aff11d189370000e829fbbd/content.htm

Default wagetype in Basic pay infotype that depends on payscale type

Similar Messages

Maybe you are looking for