Defaulting PayScale Group and Level in IT0008.

The System is configured as that the Payscale Group and Level will get defaulted in IT0008 from the Planned Compensation maintained for the Job.
This is working fine for all personnel areas except one.
Can anyone pls explain what all tables/SPRO nodes I have to check for the same?

Hi,
Check the Indirect valuation A, B, C & D config in the Reiumbursement Allownace & Perqusities( RAP's )config for the combination of PSArea, PSType, PSGroup, PSlevel
Regards,
Hemant V. Mahale

Similar Messages

Default Payscale group and level

Hi Experts,
Is there any way by which i can default the Payscale Group and Payscale Level? My payscale group is same as Employee Group and level is same as Employee Sub-group.
Plz advice.
regards
TS

Hi
You ca use tariff to default the payscale group and level for particular payroll area
you can maintain a parameter transaction for PC00_M10_CALC_SIMU inn SE93.to maintain payroll schema and payroll area as default
Reward Points

CAT2 - Payscale group and level

Does anyone know how to get project systems / finance to read the payscale group and levels from HR (instead of reading the rate from Project Systems - CP26).
Thanks.
(we have too many rates to store in Project systems and would prefer to store them in HR, any ideas?)

Hi Dianna,
Do you want to get payscale groups and level on CAT2 screen(time entry screen).
If thats your question,yes you can get that.For that you have change the settings of the CATS profile you are using.
The Display IMG path is
Cross-Application Components->Time Sheet->Time Recording--->Choose Fields
And in that click on DataEntry selection and uncheck the hide radio button for the Payscale area and group.
Hope this helps
Pl let me know if you have any questions

Payscale group and levels values are not appearing in IT0008

Hi Friends,
I craeted Payscale group & Level in V_T510. Eventhough these values are not coming as F4 (drop down)values in IT0008.
Pls adivice where I have missed the configuration.
Thanks

Hi..
ESG/CAP and and its grouping in V-t510 have already been maintained. however still it is not coming as drop down values.
Pls suggest to resolve.
Thanks

Default Pay scale group and Level in infotype-0008

Hi,
While hiring should display the default Pay scale group and Level in infotype-0008 or the pay scale group and level can default from the Job or position. Itu2019s possible? Thanks in advance.
Regards

No there is no standard Feature to default PSG and PSL. TARIFF is for PSA and PST.
Wait for some body may have some information.
Afrasyab

Defaulting Pay Scale Group and Level

Dear All,
Is there any way of defaulting Pay Scale Group and Level as they are fixed for Employee Sub-Groups?
Regards,
Ahsan Zaidi

TARIF: Default Pay Scale Type and Area in the Basic Pay
Object
Feature
Task
With this feature you control whether the default value is determined
     from the T001P from the personnel area and personnel subarea, or whether
     the default value is determined direct from the feature.
The return value must have the form xx/yy, when xx is the pay scale
     type, and yy the pay scale area.
If the feature returns SPACE as a value, then the value pay scale type
     or pay scale area is determined by table T001P. If the value does not
     equal SPACE, then this value will be taken as the pay scale type or pay
     scale area.
You can either enter return both values or only one of the two values.
     The missing value is determined from table T001P.

Default excise group and series group issue

Hi Gurus
I have a doubt. Is it possible to maintain the default excise group and series group in this order
sales org     dis chnl    division    ship pt    plant    excise group    series group
1000               EX         CD             1000     1000       10                       A1
1000               EX         CD             1000     2000       20                       A2
i tried this combination, but getting the error message that a key already exists....The header data sales area and shipping point already exists.... I cant understand why we cant give the same sales area and shipping point for a new plant combination
Thanks in advance
Mathan

Hi Mathan,
When we say Excise group then it is maintained for the plant as it is maintained with Excise authorities. We can have same shipping point for 2 different plants but the possibilities are less and when 2 plants share the resources and facilities then those plants are registered as a single excise entity with the authorities. That is the reason that the option of having the same sales area and shipping point as header data is not allowed for more than one excise group. This is more business related than SAP.
Hope this clarifies the doubt.
Regards,
Antima

Is it possible to automate 'Revise Pay Scale Groups and Levels'

Hi Experts,
I have an environment where Pay Scale Groups and Levels change yearly. Because of the number of groups and levels we have, it would be easier to upload the information as an excel file as opposed to manually entering it (via SPRO>PA>Payroll Data>Basic Pay>Revise Pay Scale Groups and Levels). Also, it would limit the chances of a data-entry error.
Is it possible to upload this data somehow? I cannot find any information on this subject.
Thanks in advance.
Shane

Hi Swapna,
So basically are you suggesting a BDC program?
Thanks
Shane

Pay Scale Group and PS Level

Hi everyone,
We use Pay Scale Group and PS Level in our company (values are defaulted in IT0008); Sometimes we need to add new pay scale groups and levels, that is done in customizing client and transported to productive system using transport requests.
Is there any other way to give permission to users to create new pay scale groups and levels directly in produqctive system?
Thanks a lot in advance.
Tata

Hello
In general practice it is not recommended to directly create PS grp and level in production as it needs a lot of testing.It may create problem in production.
Try to follow the transport process.
Cheers
Rahul

Configuration of Payscale Structure and Paygrade Structure

Hi SDN
I need to configure Payroll (Singapore). I would like to ask is it possible to create both payscale structure and paygrade structure for my project?
How do I go about configuring both structure? Is there any things to take note of while doing configuration for these structures.
Please help as Im new with SAP HCM
Many thanks in advance
Regards
Eisabess

Personnel Calculation Rule:(PCR)
A personnel calculation rule is a frame of work instruction that is checked with the existing conditions and a resulting action is performed. The Personnel Calculation rule allows one wage type to be processed in different ways in payroll accounting. The value of the standard pay wage type should be used as a basis of valuation for hourly wage earners. The value of the standard pay wage type should be divided by the planned working hours before being used as a basis of valuation for salaried employees.
1 u2013 Hourly wage earner
2 u2013 Monthly wage earner
3 u2013 Salaried employee
Collective Agreement Provisions: (CAP) :
A standard agreement designates the same pay scale groups and level for both hourly wage earners and salaried employees, however the user must still be able to enter hourly or monthly values in the pay scale table.
1 u2013 Industrial workers / hourly wage
2 u2013 Industrial workers / monthly wage
3 u2013 Salaried employee
4 u2013 Non Pay scale employees
5 u2013 Public servant

UCCE - Default Skill Group Clarification

Looking for clarification on which stats track against an agent's default skill group - ucce 9.1. Specifically, in which circumstances would calls offered/answered be incremented against the default skill group?
The scenario is an agent with 2 lines - 1 DID and one not. The agent states that he logs in using the non-DID line and that no calls were placed/received on the DID line. Grain of salt. Occasionally, there will be a single offered and answered call on a skillgroup report against the default skill group -- and not just for this one agent -- it's happened with a couple of agents. It's my understanding that if an agent manually places an outbound call, it'll be tracked against the default sg, but when would an inbound call hit that sg?
I've made some tests (transferred call to either line, inbound call to the DID line, etc) but haven't been able to make any test call hit the default sg. Any ideas?
thanks,
will

Will,
Offered/Handled should only occur for calls delivered by call center. The a few ways I can think of to deliver a call center call to a default skill group (without selecting the skill group):
Queue to Agent node
Select node followed by Agent node
Agent to Agent node
Label node, routed to extension that the Agent is logged into
That said, I think 1-3 are likely the only options that will increment Offered/Handled.
-Jameson

How do I setup users to create files in /Users/Shared with group permissions default to rw and not just r?

I have setup my iMac with 4 user accounts (for the wife and kids). Some files I would like them to all have access to and that access be read / write.
I believe I should use the /Users/Shared directory but when a user creates a file there the permissions are rw for the owner but only r for the group & other. I would like the permissions to default to rw also for group when the file is created so any of them can edit the shared file.
Basically the umask is defaulting as 0022 and I would like it to be 0002.
How can I set their account behavior to be this way by default? Thanks

You should be able to take the permissions you have set and "apply to enclosed items." I am trying to attach a picture of what this looks like so my apologies if it does not work.
Highlight your folder you want and go to File>Get Info or command+I and at the bottom where it has Sharing and Permissions, click the lock button to authenticate. Click the gear and click "apply to enclosed items". See if that works.

Course Type combination of Sequence, Alternate Group and Default in PP01

Hi Guys,
Need your help that we are facing currently.
While linking Course type with Course program(Mandatory block), we are facing issue below-
No sequence number visible on portal.
Trainings are visible in Alternative section.
After initial analyse,we found that in additional data of course type sequence(Element Sequence),alternate group and defaults(Element Alternatives) should be maintained. But not sure what should be the correct combination through which i should be able to see correct sequence in proper section.
Please suggest the proper combiation for this linkage which will be useful for me.
Regards,
Shiva

Hi,
When you maintain condition record that time system bring unit of measurement from material master and curancy from sales organization in which you created material.
Now in your customized table case, there is sales organization but not any material so it is not bringing it default as you don't have material.
So in this case you have to maintain it manually
Note - you material type, material group,etc not depandant to any UoM
Kapil

Make Messages app show names and pictures by default in groups

Is there any way to make the Messages app show names and pictures by default in groups? It's kind of annoying to have to set that every time. I'm hoping Yosemite may add this option.

Hi,
It should stay set.
Should be this Menu item.
To get the options to be dark and usable then Messages window need to be "front".
The Buddy Names item above is for the name display in the Buddy Lists.
If it is not sticking then check that you have Read and Write Permissions to the com.apple.ichat.plist in ~/Library/Preferences.
Since Lion this Folder has been hidden.
Use the Finder > Go menu > Go to Folder and copy and past the ~/Library/Preferences
FInd the File then Right click it and chose Get Info.
In the info Panel, near the bottom, your shortname should appear with (me) next to it.
You should have Read and Write permissions.
My version
7:50 pm Wednesday; June 25, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Mapping Default Profiles of PT groups and folders for automating subportal experience

I need to automate the subportal experience by adding the users to the folders. These folders will correspond to the Plumtree groups that we create.
We are already planning on automating the maintainence of these PT groups by authentication source by applying custom business logic in Java program. I believe I can do the folder maintainence in the same program as well. However to make iot more effeicient and maintainable, I have the following questions.
Is there a way to map the PT groups to the folders by using Default profiles(by auth source?)? I think this would help me avoid hard coding which users belonging to certain groups go in which folders. Is there another better approach? Any help would be appreciated.
Thanks.
Vanita
Staples

Thanks a lot for you reply Mark. I tried to add the Plumtree only groups to the Auth source and I am not allowed. It seems like this works only for the Auth Sorce(NTLM, AD etc.) groups not Plumtree only groups. Is there a way to do this kind of mapping for Plumtree only groups (to avoid doing this programmatically)?
Regards
Vanita
------- Mark Dimas wrote on 1/28/05 10:41 AM -------
You can have users placed directly in folders based off of group membership by using the Partial Users Synchronization mode.
On the auth source select Partial Users Synchronization and run a synch job. This will import all the groups. Then go back to the auth source, on the first page under Default Profiles add the groups, and for each group you can select the destination folder for members of that group. Then, on the Fully Sychronized Groups page you can add all the groups you want to import members from. Run the job again and all the users that are members of the selected groups will be imported and placed in the correct folder.

Defaulting PayScale Group and Level in IT0008.

Similar Messages

Maybe you are looking for