Defaulting Rules Not Working for Repair Orders in OM?

Hi,
Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
But in our project we are using Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
Please help me to solve this issue ASAP.
Thanks,
Kishor

Hi,
You have like this:
1. Price list
2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
You have to make
1. XXOE_DEFAULT_PVT.custom_code
2. Price list
3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
Did you made own custom code to pick currency?
Regards,
Luko

Similar Messages

Defaulting Rule not working for Order Currency

Hi,
We have a requirement where we need to have defaulting currency as SEK for one of the Sweden customer. We have set the defaulting rules for the same but doesn't seem to work. Any suggestions will help..
Thanks in Advance.

Hi,
You have like this:
1. Price list
2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
You have to make
1. XXOE_DEFAULT_PVT.custom_code
2. Price list
3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
Did you made own custom code to pick currency?
Regards,
Luko

Derivation Rules Not Working for other company codes

Hi,
I have 5 Company codes and only for one FM was activated. now i want to activate FM for all 5 company codes. for which i have assigned the FM area to all 5 company codes. I have also assigned the derivation strategy to all 5 company codes as well. now when i post a transaction for any other company code derivation rules is not being process hence no commitment item or fund center is derived. however for the original company code for which FM was activated in the first derivation rule are working fine means system is deriving commitment item and fund center. can any one tell me why derivation rules are not working for other company codes? do i have to add Company code in source field of derivation strategy? could this be the reason? because in beginning there was no other company code so we did not included any company code field in the first place.
Regards,

Faizan,
Go to Funds Management Government> Actual and Commitment Update/Integration> Activate/Deactivate Funds Management.
In the screen create an entry for each Company Code and Funds Management Area combination.
Activate the AA Derivtn flag if you want the derivation to be called and the Update flag if you want to update commitments and actuals in FM.
Thanks
Shyam

Copa derivation rule not working for Discount GL

Hi All,
Kindly note that I have a distribution rule where company & plant combination is used where condtion is that customer group 3 should be 018 and then replace distribution channel to 03.However the rule is not working for discount GL posted in the billing document.
I tried testing it in FB50 but then it does not allows me to enter plant and because of that derivation rule fails. However in my billing doc I do see a plant against discount GL and still the rule is not getting picked.
I had raised this issue earlier but the reply where not as expected and so I have rephraised my question.
Kindly help me on this.
Regards
Pranay

Hi Pranay
I could not understand your req to a great detail, following are my observations
1. There should be derivation rule in place 1st of all to derive customer group from billing doc...
Check if Cust Group is populated in your COPA doc or not.. For this cust group should be a segment level char in KEQ3
2. Create a derivation rule using method "Derivation".
Source fields would be Cust Group, Plant and Company code ( I guess you want to change dist channel with this combination)
Target field would be VTWEG (Dist Channel)....Click on the magnifying lens beside VTWEG and choose relevant radio button "Overwrite if ......."
CLick on RULE VALUES and maintain the required Values there
This should work...
Regards
Ajay M

Iphoto 9.6 is not sharing with Facebook,iMessage,iCloud and is not working for print orders

iphoto 9.6 on yosemite is deleting all of the pics from the former library, iphoto 9.6 can't share with Facebook despite that it is oke with the account. no sharing with iMessage and no sharing with iCloud possible the choices stay grey. also print orders are not possible it's stay also grey.

gombaig wrote:
I had the same issue too, email, facebook, Twitter ect, all greyed out.
What ist the solution?
Did you read the thread?
here is one
I had the same issue, email, iMessage, Facebook,etc.. plus print all greyed out. I went up to the File menu, clicked on the Switch to Library drop down. Since I only have one library it was already selected, hit choose and all of the functions work again. Seems the system wasn't acknowledging my original library once I updated to Yosemite or 9.6. Either way, it works now.
If that does not work here is another suggestion
Try repair permissions with Disk Utility.
LN

Copied layout is not working for Sales order item assinment block

Hi Experts,
I copied the standard componet BT115IT_SLS/items view layout with custom role configuration key and worked fine.
I have added one more field to the item view with the same configuration and saved .When I opended the sales order in the WEB UI , The item assigment block is displaying with complete BTADMINI context fileds and This is the issue.
I have seen configured fields only in the personalization and I have downloaded the items assigment block data to Execl.In the Execl sheet I can able to see the configured fields (availble fileds in the configuration tab in component workbemch) data only.
But Items assignment block is displaying all the fileds (taking from the context node BTADMINI).
I have deleted existing customer configuration and again copied from the standard layout.But I got the same issue.
I have wriiten some code in the ON_NEW_FOCUS and commented the code.Still it not working.
Please help me , where I have done the mistake and provide me some inputs.
Thanks,
Venkky

Hi Experts,
Solved isuues myself.
The problem is inconsistency of BTAdminI context node . I have deleted the view enhancement and again enhanced the view .I copied the layout with customer role key and dispalyed expected layout.
Thanks,
Venkky

UDev rules not working for MidiSport 2x2 usb midi device

I installed arch a couple of months ago and am loving it so far. Any problems I've had so far have already been solved in the forums, but this one's really got me. I have a MidiSport 2x2 that I want the firmware to be loaded on everytime I plug it in. I installed (there's not an arch package) a package that is supposed to do just that. (It's called midisport-firmware-1.2.tar.gz). However, the package seems to be out of date (2006) and I even had to modify a couple places in the configure script to get it to work with current program revisions. However, once installed, it does nothing. It installed firmware files and udev rules for the device into a couple of directories. When I run the command that is supposed to load the firmware, it works fine. But for some reason, (I even checked the udev kernel log) it's like the event isn't even being triggered. Here's part of the original file that came with the package that's supposed to load the firmware:
# midisport-firmware.rules - udev rules for loading firmware into MidiSport devices
# DEVPATH=="/*.0" selects interface 0 only
# (some udev versions don't work with SYSFS{bInterfaceNumber})
# MidiSport 2x2
ACTION=="add", SUBSYSTEM=="usb", DEVPATH=="/*.0", ENV{PRODUCT}=="763/1001/*", RUN+="/sbin/fxload -s /usr/local/share/usb/maudio/MidiSportLoader.ihx -I /usr/local/share/usb/maudio/MidiSport2x2.ihx"
# vim: ft=conf
And here's what I modified it to in an attempt to make it work:
# MidiSport 2x2
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0763", ATTR{idProduct}=="1001", RUN+="/sbin/fxload -D /dev/%k -s /usr/local/share/usb/maudio/MidiSportLoader.ihx -I /usr/local/share/usb/maudio/MidiSport2x2.ihx"
I would really appreciate help from anyone who knows about this kind of thing, as I can't figure out what's going wrong. If it's something wrong with the config, please let me know. Actually, some HAL events popped up when I was testing this out. Is it possible HAL is blocking the udev event somehow?

Hi,
The firmware files must be put in /lib/firmware so they can be found by the kernel. Are they being put there?

Substitution Rule not working for invoice receipt

Hi All,
I have written a Substitution rule using OBBH T.code for Call point "2" - Line item, The rule details are as below
For Account "GR/IR Account" And "Business Area=XXXX" Substitute "Profit Center = YYYY"
When I do Goods Receipt the my substitution is working, it is replacing the existing cost center to "YYYY", but when i do Invoice Receipt the profit center is being derived from the account assignment of the WBS element.
I tried writing a derivation rule 3KEI and it didn't work either,
How can i make my above substitution to work on both (GR and IR) accounting documents.
Any help is greatly appreciated.
Thanks
Shasha

Hello,
Perhaps your prerequisite need to contain other BKPF values like, company code, t-code, etc (if any).
Also please run program RGUGBR00 in SE38 to activate programs.
hope this helps
Regards
Ajith

MN04 not working for free text PO

Hi All,
I have maintained a condition record through MN04 in purchase organisation, company code and vendor combination. This condition record is working fine for regular purchase orders. But it is not working for free text PO's. Could you please guide me why is it so?
I am maintaining same purchase organisation, company code and vendor combination for free text PO also. Question is why it is working for a purchase order with material inside it and why it is not working for purchase order with out material.
Thank you all in advance

Hi,
Seems you are using a custom print program and form. I would suggest to change the program to SAPFM06P, form routine as "ENTRY_NEU" and the form as "MEDRUCK" in NACE transaction for the output type and check the scenario again. Also cross check the settings with the KBA: 1829682 - Output type is not determined in Purchase order
If its getting triggered, then check the custom program and the form with the help of technical team.
Regards,
AKPT

Default unit of work for vehicles on PM work orders

Hi SAP experts,
I would like to find out if it is possible to default the unit of work for vehicles on a PM order?
We currently have two types of work centers, people (H) and vehicles (KM). The problem is that we can only default one unit (H) for the order, which means that we have to manually change it for the vehicles.
Is there a way in config to overcome this?
Regards

Hi Rajesh,
We are getting the default unit in operation tab and all the config of default values is available but when we execute the F4 option the unit "H" is not appearing where as if we change from HR which is a default unit to H it is getting saved at the operation Tab.
Hope it is clear now.
Regards,
Selva

LSMW For Converting Open Sales Orders (not working for more than 1 item)

Hi,
I am using following standard object for Open sales orders .
Object               0090   Sales documents
Method               0000
Program Name         RVINVB10
Program Type         D   Direct Input
Its not working for more than 1 line item.
For more than 1 line item its giving Error saying that
'102122                         V1                   845
Print parameter SAPML2 1 is not defined
Can anybody help me out in this regard.
Thanks in advance.
Nitin.

hello, friend.
i will still research the subject. but the first thing that comes into my mind is t-code VA05. with this, you have the option to change the Plant en masse. so a possible workaround is for you to list a number of sales orders using VA05. you then sort the line items by Plant. choose all items with the same plant, change the plant via mass change... then change back to the original plant. hopefully, the new settings should apply.
do test a few sales orders by doing this for a larger scope.
regards.

Form Personalization is not working for copied Sales Orders

Hi All,
We have a requirement in Sales Order form, if the order type is "Standard" then Ship method field should be mandatory.
We were able to do this using below form personalization, it is working for new order creation.
When we did the below testing it is not working
Inactivated the ship method and try to copy the order with Standard type the field remains mandatory and null but still it is allowing to book the Sales Order.
Please help to sort out this issue, let me know if it is not clear
Condition
Trigger Event : WHEN-NEW-ITEM-INSTANCE
Trigger Object: ORDER.SOLD_TO
Condition:
(:ORDER.ORDER_TYPE not like '%STANDARD%')
Action
Type : Property
Object Type : Item
Target Object : ORDER.SHIPPING_METHOD
Property Name: REQUIRED
Value: True
Thanks,
CSK

Hi CSK,
try it in well validate item trigger.
If that order type is list then you may disable the field in WHEN LIST CHANGED trigger itself.
Hope it will work,
Regards,
Soofi

VF06 not working for drop ship orders

Hi All,
We use VF06 for creating billing docs. Interesting it works good for all order/delivery types but does not create any billing document for third party sales orders. I have flagged both - order related and delivery realted document indicators and leaving all the selection inputs blank except for the sales org. When we try to create the invoice for a drop ship order, it gets created but surprisingly does not get picked up in VF04 or VF06.
Any help would be appreciated.
Thanks & Regards,
Vidya

Hi,
I did go through some notes and could find out the problem. In copy controls we have set the billing quantity to F to enable billing even if GR is done for the PO and need nt have the Vendor Invoice Recipet to be done. SAP says in some notes that if this is set, then the billing due list will not have the order displayed even if it can be manually invoices. But I dont have any idea how to overcome this. SAP has provided standard reports but somehow these reports are not working for me.
Thanks & Regards,
Vidya

Auto_lexer (stemming) not working for other languages(other than english)

Hi All,
We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
Following is the code for AUTO_LEXER creation:
CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
lang_index VARCHAR2(3),
content_text CLOB,
CONSTRAINT test_auto_lexer_pk primary key (pkey))
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (1,'eng','I drive a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (2,'eng','I drove a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (3,'eng','I have driven a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (4,'eng','Just check for other things')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (5,'eng','always drive a car')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (6,'eng','it is nothing')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (7,'ger','Ich fahre ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (8,'ger','Ich fuhr ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (11,'ger','immer Auto fahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (12,'ger','es ist nichts')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (13,'ger','sprechen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (14,'ger','sprach')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (15,'ger','gesprochen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (16,'ger','tale')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (17,'ger','Indlæg')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (18,'ger','tales')
BEGIN
ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
END;
CREATE INDEX test_auto_lexer_ix1
ON test_auto_lexer(content_text)
INDEXTYPE IS ctxsys.context
PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
select to_char(content_Text) from test_auto_lexer where contains(content_text,
'<query>
<textquery lang="ger" grammar="context">
$fahren
</textquery>
<score datatype="integer"/>
</query>') > 0
this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
Could any one help me with this, in case I am missing something here. I would be really thankful.
Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

In the future, please begin a new thread for a new question and provide a link to a related question.
According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
Basic_lexer attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
Basic_wordlist attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
Also, please see the following note:
Features not available in 11.2.0.3:
http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
"Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
I don't work for Oracle, so I don't know why they do things the way they do.
So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
-- demo:
SCOTT@orcl_11gR2> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
5 rows selected.
SCOTT@orcl_11gR2> select value from v$nls_parameters
2 where parameter = 'NLS_CHARACTERSET'
3 /
VALUE
AL32UTF8
1 row selected.
SCOTT@orcl_11gR2> DROP TABLE news
2 /
Table dropped.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> CREATE TABLE news
2    (pkey            NUMBER,
3      lang            VARCHAR2 (2),
4      short_content CLOB)
5 /
Table created.
SCOTT@orcl_11gR2> INSERT ALL
2 INTO news (pkey, lang, short_content)
3    VALUES (1, 'en', 'I drive a bike.')
4 INTO news (pkey, lang, short_content)
5    VALUES (2, 'en', 'I drove a bike.')
6 INTO news (pkey, lang, short_content)
7    VALUES (3, 'en', 'I have driven a bike.')
8 INTO news (pkey, lang, short_content)
9    VALUES (4, 'en', 'I always drive a car')
10 INTO news (pkey, lang, short_content)
11    VALUES (5, 'en', 'This is nothing')
12 INTO news (pkey, lang, short_content)
13    VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
14 INTO news (pkey, lang, short_content)
15    VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
16 INTO news (pkey, lang, short_content)
17    VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
18 INTO news (pkey, lang, short_content)
19    VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
20 INTO news (pkey, lang, short_content)
21    VALUES (10, 'de', 'Es ist nichts.')
22 SELECT * FROM DUAL
23 /
10 rows created.
SCOTT@orcl_11gR2> BEGIN
2    -- word list:
3    ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
4    ctx_ddl.set_attribute      ('my_wordlist',   'stemmer',           'auto');
5    -- english lexer:
6    ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
7    -- german lexer:
8    ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
9    ctx_ddl.set_attribute      ('german_lexer', 'composite',       'german');
10    ctx_ddl.set_attribute      ('german_lexer', 'alternate_spelling', 'german');
11    ctx_ddl.set_attribute      ('german_lexer', 'mixed_case',       'no');
12    ctx_ddl.set_attribute      ('german_lexer', 'base_letter',       'yes');
13    -- multi_lexer:
14    ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
15    ctx_ddl.add_sub_lexer      ('global_lexer', 'default',            'english_lexer');
16    ctx_ddl.add_sub_lexer      ('global_lexer', 'german',            'german_lexer');
17 END;
18 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create index search_news
2 on news (short_content)
3 indextype is ctxsys.context
4 parameters
5    ('lexer            global_lexer
6       language column lang
7       wordlist       my_wordlist')
8 /
Index created.
SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
2 /
Session altered.
SCOTT@orcl_11gR2> set timing on
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drive') > 0
3 /
      PKEY LA SHORT_CONTENT
         1 en I drive a bike.
         2 en I drove a bike.
         3 en I have driven a bike.
         4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drove') > 0
3 /
      PKEY LA SHORT_CONTENT
         1 en I drive a bike.
         2 en I drove a bike.
         3 en I have driven a bike.
         4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
2 /
Session altered.
Elapsed: 00:00:00.01
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fahr') > 0
3 /
      PKEY LA SHORT_CONTENT
         6 de Ich fahre ein Fahrrad.
         7 de Ich fuhr ein Fahrrad.
         8 de Ich habe ein Fahrrad gefahren.
         9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.07
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fuhr') > 0
3 /
      PKEY LA SHORT_CONTENT
         6 de Ich fahre ein Fahrrad.
         7 de Ich fuhr ein Fahrrad.
         8 de Ich habe ein Fahrrad gefahren.
         9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
select * from v$version
select value from v$nls_parameters
where parameter = 'NLS_CHARACTERSET'
DROP TABLE news
EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
CREATE TABLE news
(pkey           NUMBER,
   lang           VARCHAR2 (2),
   short_content CLOB)
INSERT ALL
INTO news (pkey, lang, short_content)
VALUES (1, 'en', 'I drive a bike.')
INTO news (pkey, lang, short_content)
VALUES (2, 'en', 'I drove a bike.')
INTO news (pkey, lang, short_content)
VALUES (3, 'en', 'I have driven a bike.')
INTO news (pkey, lang, short_content)
VALUES (4, 'en', 'I always drive a car')
INTO news (pkey, lang, short_content)
VALUES (5, 'en', 'This is nothing')
INTO news (pkey, lang, short_content)
VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
INTO news (pkey, lang, short_content)
VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
INTO news (pkey, lang, short_content)
VALUES (10, 'de', 'Es ist nichts.')
SELECT * FROM DUAL
BEGIN
-- word list:
ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
ctx_ddl.set_attribute     ('my_wordlist',   'stemmer',            'auto');
-- english lexer:
ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
-- german lexer:
ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
ctx_ddl.set_attribute     ('german_lexer', 'composite',          'german');
ctx_ddl.set_attribute     ('german_lexer', 'alternate_spelling', 'german');
ctx_ddl.set_attribute     ('german_lexer', 'mixed_case',          'no');
ctx_ddl.set_attribute     ('german_lexer', 'base_letter',         'yes');
-- multi_lexer:
ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
ctx_ddl.add_sub_lexer     ('global_lexer', 'default',             'english_lexer');
ctx_ddl.add_sub_lexer     ('global_lexer', 'german',              'german_lexer');
END;
create index search_news
on news (short_content)
indextype is ctxsys.context
parameters
('lexer            global_lexer
    language column lang
    wordlist         my_wordlist')
EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
COLUMN short_content FORMAT A30
ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
set timing on
select * from news
where contains (short_content, '$drive') > 0
select * from news
where contains (short_content, '$drove') > 0
ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
select * from news
where contains (short_content, '$fahr') > 0
select * from news
where contains (short_content, '$fuhr') > 0
/

EP6.0 SP2 to EP 7 upgrade - UWL not working for PCR approvals

Hi there,
Following the EP 7.0 migration, the UWL is not working for PCR approvals. Following the registration of the WebFlowConnector, using the default configuration, clicking a PCR approval item in the Inbox brings up the following error:
HTTP handler for starting an external service cannot be read
In order to rectify this, the following configuration file was uploaded.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [ ]>
<UWLConfiguration version="1.0">
<ItemTypes>
    <ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
      <ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchIView" handler="IViewLauncher">
          <Properties>
            <Property name="iview" value="com.sap.pct.hcm.isrdispatcher.default"/>
            <Property name="openInNewWindow" value="yes"/>
          </Properties>
          <Descriptions default="launchIView"/>
        </Action>
      </Actions>
    </ItemType>
</ItemTypes>
</UWLConfiguration>
Following the new configuration, clicking the item HAS NO EFFECT i.e. no window, no action, nothing. The only available option available is an option to Forward the item.
I have tried the following ItemType names with the same result:
1. uwl.task.webflow.TS50000075.D46CLNT080
2. uwl.task.webflow.D46CLNT080_TS50000075
Has anyone encountered this before?
Cheers
John

FYI. The problem seems to be occuring as a result of the running EP7.0 with a SAP R/3 46C backend.
I did manage to get this working in the end. I had to create an iView say "myISRDispatcher" based on the portal component com.sap.pct.hcm.isrdispatcher.default. Update the UWL configuration to refer tot his PCD location as shown below:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [ ]>
<UWLConfiguration version="1.0">
<ItemTypes>
    <ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
      <ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchIView" handler="IViewLauncher">
          <Properties>
            <Property name="iview" value="pcd:portal_content/myISRDispatcher"/>
            <Property name="openInNewWindow" value="yes"/>
          </Properties>
          <Descriptions default="launchIView"/>
        </Action>
      </Actions>
    </ItemType>
</ItemTypes>
</UWLConfiguration>

Defaulting Rules Not Working for Repair Orders in OM?

Similar Messages

Maybe you are looking for