Defaulting user type to Communication in SU01

Hi,
When we create users, we would like the USER TYPE field on the Logon Data tab of SU01 to be defaulted to 'Communication'. currently it gets defaulted to Dialog. 90% of our users are Communication. Is there a way to default this field to Communication instead of Dialog.
I couldn't find any suitable user exit or BADI which i can use. If this can be achived via customising or some system profile paramater it would be great.
Help will be appriciated.
Thanks
Amandeep

Have you tried with User Mass Maintainance .. SU10?
Thanks.
Regards,
Naimesh Patel

Similar Messages

User Type (Dialog , Communication etc) can impact on SAP User Licensing

Dear Expert,
The User Type (Dialog, Communication, System etc) can impact on SAP User Licensing.
Suppose if I craete a user type other than DIALOG such as SYSTEM or COMMUNICATION etc; will this be counted as License User. Or only DIALOG users are paid license users.
Kindly advice.
Regards
AJ

Thanks Uday and Nagendra...
Dear Nagendra,
with reference to below sentense from your referred link
" Consolidating Contractual User Types
Use
With this procedure, you consolidate the contractual user types of the individual users. The LAW takes account of the fact that certain contractual user types are already contained in others. In this way, license costs are only incurred for the inclusive user types of the user."
When I go User Classification Display screen, under Contractual User Type column all my 150 users are marked "Operational" but for those which I defined as System / Communication User are defined any contractual user type.
What does it mean??
Thanks in advance for your help.
Regards,
AJ

Default License Type in SU01

Hi experts,
We have recently had a change in our licensing agreement such that almost all of our users (approximately 99%) will be assigned to one license type going forward. With respect to creating new users with this license type, is there any way to default the license type in SU01, so we don't have to fill out this field every time (since all users will now be created with the same type)?
Thanks,
HC

Thanks. I had seen that and read it several times. I reread it again. It's still not what I'm after. It looks to be a work-around to not having USMM access and was not actually implemented. I have the needed USMM access.
Let me phrase my issue...
On Production, I start USMM. In the lower half of the screen, I slect the "Price lists" tab. Only the "SW Component Price List" is checked. The "Default User Type" shows "Operational."
I want it to be "SAP Business Warehouse User." Thus when new users are created through SU01 the new user creation process will not have to include changing the license type from "Operational" to "SAP Business Warehouse User."
Ultimately I just after having each new user created as an "SAP Business Warehouse User" when nothing is done through the SU01 license tab.
Bob

How do I configure a Frontend Printer for User type - Communication "C"

Hi,
Inorder to facilitate the business process in our company we have assigned (using T.code OMJ3) 2 Storage locations to print the material documents to the front end printer whenever a GR or GI/GT is performed.
Recently we implemented a project, to perform a GR (movement type 505) using dotnet application, which connects to SAP R/3 using a Login Id with user type "C" (communication). The material documents cannot be printed as the system is searching for a frontend printer. If we assign a particular Printer we are able to print, but this does not help our business process effectively.
Can we configure to print the material document on the front end printer? Assumed that fronted printer cannot be configured to this user type and we tried to use the T.code OMJ4 to assign the user group, but did not work. The output determination was always pointing to the frontend printer and the spool is in "waiting" status.
Please suggest how can we configure so that at the same storage location, we should be able to use the frontend printer by user type dialog or communication.
Or any alternate way of doing this.
Thanks
Nithin

Firefox Orange Button > Preferences > Preferences > Application
Search for the ".indd file" and change the option

RFC User Type

Hi
Calling gurus.
When gererating RFC users for the READ and TMW rfc's in Solution Manager users gets generated, and I know the user type is Communication user, however should you be forced to have to create your own users to use within this rfc would it be best to stick to communication user type, or could a system user type be used.
It is my understanding that logon via read rfc should not be allowed as it could be a security risk.
If I am on the wron track please enlighten me or point me towards a conclusive best practice regarding this.
Thanks in advance.

Hello again Paul,
1.-
At the same 2008 manual "Activating the SAP EarlyWatch Alert on Solution Manager 7.0" yo can see on page 11 this:
...A working dialog connection such as *TRUSTED or LOGIN. Once the *BACK destination is created, these can be deleted again...
This prerequisites are need for the creation ob RFC "_BACK" on remote system, but for remote call of sdccn the prerequisites on Page 15 are not enough !!!
If you want to call remotely sdccn from solution manager you need a dialog trusted connection.
I have just tested on our solution manager 5 minutes ago, you are invited to our solution manager if you want to check it.
2.-
What about this:
My question is, Will take into account SAP this users for the "SAP Security user audit" ?
Regards:
Luis

Is there a way to Default the Contractual User Type in Licence tab in SU01.

Hi Guys,
Is there any way to Default the Contractual User Type in Licence tab while creating users in SU01 to a specific value. Any help would be appreciated.
Thanks,
Naveen

Naveen, though you marked the question as answered, there is another alternative (needs change mgmt involved)-
1.Go to the field where you want the parameter ID to appear.
2.Go to the technical help for the field. In this case the Contractual User Type field.
3.Double click on the Screen data screen number (0112).
4.Click on the Element list tab and look for the screen field (from previous page). It is important that you find the entry with a type of I/0 not Text (US930-USERTYP).
5.When you find the entry click the special attributes tab. There are two columns on the right hand side GET Parameter and Parameter. The GET column needs to be selected for the parameter ID to be active.
6.Note if you change a field it is important to activate the change in addition to saving or the change will not take effect.
7.Probably you would like to make this change in the development system and move transport to other systems.
After this you have to set this parameter in your user master to the required value.

How to add a default user group for multiple document type's?

Hi,
I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
Please confirm.
Thanks,
Saloni

Hi Saloni,
Based on what your specific requirement, it might be easier to do it with scripting.
If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
Regards,
Vikram

User Exit for MIRA to default document type

Is there any user exit in MIRA ,which can change the default document type .Because normally the document type is defaulted in the customization ,all the user exits which are available have the incoming structure (INVFO) in which the document type(INVFO-BLART) is coming as IMPORT parameter (e.g. EXIT_SAPLFDCB_001),hence it cannot be changed .
I would like to default the document type based on company codes .
Please let me know if there is any other way of doing this.

>
Rahul Saxena wrote:
> I have given the condition"BSEG-ZTERM = 'ZTST'" in Prerequisite, and in the Substitutions when I try to assign constant value '02/16/2009' to the field Baseline Date, I don't see that Baseline date field in Substitute fields for Class '009'.
>
> How do I add Baseline date in that popup to select and assign values.
>
> Please suggest.
>
> Thanks-
i think your date format and system date format is not suitable.
give the date format as 20090216 as system format.

Meaning of User types & their use....

Hi all,
Please explain me below user types and their significance in brief:
USR02-USTYP Description
A             Dialog
B             System User (Internal RFC and Background Processing)
C             Communication User (External RFC)
L             Reference User
S             Service User
Regards,
Sachin

User Type
Dialog 'A'
A normal dialog user is used by one person only for all types of logon.
During a dialog logon, the system checks for expired and initial passwords and provides an option to change the password.
Multiple dialog logons are checked and logged if necessary.
System 'B'
Use the system user type for internal system processes (-> background processing) or system-related processes (-> ALE, workflow, TMS, CUA).
Dialog logon (using SAP GUI) is not possible.
A user of this type is excluded from the general settings for password validity. Only user administrators can change the password using transaction SU01 (Goto -> Change Password).
Multiple logons are permissible.
Communication 'C'
Use users of type Communication for dialog-free communication between systems (-> RFC or CPIC) .
Dialog logon (using SAP GUI) is not possible.
The general settings for the validity period of a password apply to users of this type. Users of this type can change their passwords (like dialog users). The dialogs for changing the password must be provided by the caller (RFC/CPIC client). You can use the RFC function module USR_USER_CHANGE_PASSWORD_RFC or the RFC API function RfcOpenEx() to change the password.
Service 'S'
A user of the type Service is a dialog user that is available to an anonymous, larger group of users. Generally, this type of user should only be assigned very restricted authorizations.
For example, service users are used for anonymous system access using an ITS service or a public Web service. Once an individual has been authenticated, a session that started anonymously using a service user can be continued as a personal session using a dialog user (see SUSR_INTERNET_USERSWITCH)
During logon, the system does not check for expired and initial passwords. Only the user administrator can change the password.
Multiple logon is allowed.
Reference 'L'
Like the service user, a reference user is a general user, not assigned to a particular person. You cannot log on using a reference user. The reference user is only used to assign additional authorization. Reference users are implemented to equip Internet users with identical authorizations.
On the Roles tab, you can specify a reference user for additional rights for dialog users. Generally, the application controls the allocation of reference users. You can allocate the name of the reference user using variables. The variables should begin with "$". You assign variables to reference users in transaction SU_REFUSERVARIABLE.
This assignment applies to all systems in a CUA landscape. If the assigned reference user does not exist in one of the CUA child systems, the assignment is ignored.

Assign default content type to any library automactially when site get created or people add the library

we are on on premise environment, and we have a requirement that when people create a site or a sub site or even when they add a new document library , we want to ensure our custom content type is assigned as default content type to this library.
the question is that is there any non-full trust solution, i know we probably can do it via feature stapling, or custom site template stuff. but they are NOT considered as we want PLA compliance

Hi,
As I understand, you would like to asscoiate a custom content type to a library when the library is created.
With OOB option, you could try add this content type to an existing library, and save library as template. Then the library template should appear in Your Apps page, that is to say, users can directly create document library based on this template.
As I tested, new document library created based on this template contains custom content type by default.
With programatically methods, please refer to the similar threads below:
https://social.technet.microsoft.com/Forums/en-US/ec9e243b-ea4c-4a46-8780-75a3a5659164/mysite-add-content-type-to-document-library-by-default?forum=sharepointadminprevious
https://social.technet.microsoft.com/Forums/en-US/e58eb107-daa5-4a51-a139-dca2b1cf8591/set-default-content-type-for-document-libraries-on-a-custom-site-template?forum=sharepointdevelopmentprevious
Regards,Please
remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Document Set default content type

When defining a document set, you can define what content types can be used in a document set. If, after uploading a document, the user cancels the properties page, the default content type for the library is assigned to the document (even though the
document set does not permit the content type). This is obviously a bug. There have been several posts on this and it appears 2013 has the bug as well as 2010.
We are seeking a work around to this bug.
Is it possible in in the client object model by placing a CEWP in the editform.aspx to force a content type on the item when the form is loaded?
The other option is to modifiy the url that opens EditForm.aspx to force the content type. Unfortunately the link that opens the EditForm.aspx page cannot be modified in the document library.

Hi Clem_FRB,
I did a test in my environment and I reproduce this issue.
As a workaround, I suggest you change the content type or return an error in ItemAdded Event Receiver for document library.
Here is a similar thread for you reference:
http://sharepoint.stackexchange.com/questions/21986/document-sets-dont-enforce-allowed-content-types-when-multiple-doc-set-ct-are-a
More information for your reference:
http://www.niteenbadgujar.com/2013/05/change-default-content-type.html
https://social.technet.microsoft.com/Forums/en-US/281fa281-7071-4beb-b275-e3179ce2cc08/how-to-set-default-content-type-in-document-library-using-client-object-model?forum=sharepointdevelopmentprevious
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Managed Default versus Managed Custom Folder, and Default Folder Type Options

I am looking to create some new managed folders needed for company retention policy.
It seems pretty forward to create the folder:
New-ManagedFolder -Name "[Name Here]" -DefaultFolderType Inbox -Comment "[comments here]" -MustDisplayComment $true
However I have noticed there seems to be two types of folders: Managed Custom and Managed Default. What exactly is the difference.
Also what different default folder type options are there, and what is the different between them?

I actually am using retention tags and retention policies for the existing folders (inbox, deleted, junk/spam, conversation history). Which takes care of most of our actual messages.
However most of the space in a users mail box is take by docs scanned to their emails. These docs are almost instantly moved to file servers, and other databases but sit in the mailboxes for ever. So I was hoping to create a default folder and deploy rules
so that all the scanned items are automatically moved to that folder where they can be deleted per a retention policy tag.
I'm not married to this method but it did seem reasonable in terms of not leaving things to the users to sort items, and would love a better way to accomplish it.
The retention policy says we will keep communications for a maximum x years for users excluding certain document types (junk/spam, voice mails, Instant messages, Scanned docs) and any thing older will be automatically removed, the special documents
will have significantly shorted life spans (1 to 8 weeks).

How to Change default format type in output device

Hi all,
I want to change the default format type from X_65_80 to another for all users.
Can anyone tell me the process.
Platform: SAP ECC 5.0 + Oracle 9.2.0.7 + HP UX
Thanks in advance
Regards
Eshwar

Hi Sam,
Thanks for the reply.
Where can I select the required format type as default for all reports.
I have checked in SPAD -> Extended Admin -> Device Types -> Format Types. But I did not find any option to set the format type as default for all reports for all users.
Regards
Eshwar

Suppress the Default File Types dialogue, Office 2013 C2R

Hi.
We are doing a rather large Office 365 Proplus deployment using click-to-run via SCCM. We have the relevant group policys configured for the most part but we can't figure out how to get rid of the Default File Types dialogue box that pops up during the first
run of any of the Office applications. It asks the user if he/she wants to use Office XML or OpenOffice document formats.
When using the MSI-version and a custom install the administrator can answer this before creating the deployment package, but this is obviously not possible using C2R.
We have tried to set HKEY_USERS\<user_SID>\Software\Microsoft\Office\15.0\Common\General
/v ShownFileFmtPrompt to 1, but it doesn't work. We have also set the default file type for each application but on first run, the dialogue box still shows.
How can we achieve a simple deployment from a user perspective? The picture below is the setting we want to configure.
Best regards
Joakim

Dito. This should have been solved when Office 2013 launched and there's still no official solution?

How do you set/change the default alarm TYPE in iCal?

I like to think I'm a power user, but this one I just can't figure out. The question/problem is: How do you sent the default alarm TYPE in iCal? The problem is illustrated in the picture below in the blue circled area.
Specifically, whenever I set a new event in iCal, it defaults to this window with the default alert being "Default (1 hour before)." The one hour before is fine, but the problem is, WHAT is the default? It seems to be just a sound, but that's not good enough to actually alert me of anything.
The goal I'm trying to achieve with this post is to determine how to CHANGE the "default" new event alert FROM "Default (1 hour before)" TO one of two alerts that I actually find useful: I want MY "default" new event alert to be either "email" to the primary address, OR, "Message with Sound".
Any ideas, folks? Thanks.

Understand. I am in the edit mode for my contact. I see all the contact info. There is no right click or other means to change the DEFAULT address that autofill uses (it also is first to appear if I type my name in an e-mail). For instance for a group e-mail you can change the default addresses of each contact by control-clicking on the group in Address Book. I can't seem to make the default change in my v-card.

Defaulting user type to Communication in SU01

Similar Messages

Maybe you are looking for