DefaultWebApp on virtual host

The documentation for WLS 8.1 says the DefaultWebApp parameter for virtual hosts
is being
depricated, yet you are not allowed to add more than one web application to a
domain that
has a context root of /. Is there another way to code a default application for
a virtual host
that I am not aware of? What would the advantage of a virtual host be if you
can't assign a
default web application?

We do both.. physical gets installed on /opt and is just the agent & host target. Virtual is the db, listener, agent and virtual host. This way you can tell when a box that is not "active" is alerting or crashing and the virtual agent can contain the metrics and such set once and consistent. If you failover . you would have to rediscover/unblackout the db if you decided to discover it on the physical host.
Our environment is veritas cluster server .. sounds like you have perhaps more of a vmware type of environment.
Either way I would think you should go with the virtual agents.

Similar Messages

Virtual hosting in Weblogic 6.0

hi,
I have created a virtual host with the name MyVirtualHost and VirtualHost names
as mysite , in wl6.0 using the admin console.
I have cofigured DefaultWebApp_myserver as the default web application.I checked
the config.xml file and an entry has been made in it <VirtualHost
DefaultWebApp="DefaultWebApp_myserver"
Name="MyVirtual Host"
PostTimeoutSecs="20"
Targets="myserver"
VirtualHostNames="mysite"
/>
How do I access it?
I tried http://mysite and http://mysite:7001 but I get the default "page cannot
be displayed " page with IE.
Any Help?
Thanx
Sunil

Not quite sure what the question is, but the answer most likely rests in wl 6.0 docs under "virtual
          hosting".
          Gene
          "Virendar Rana" <[email protected]> wrote in message news:3a7202b7$[email protected]..
          > I have multiple high-level DNS domain for which I want to setup Virtual Hosting in a single
          Weblogic Server 6.0?

How do I set up a virtual host in my BC Site?

Hi,
I have my domain on one Server and want to link it with my Site in BC using a virtual host/domain. Is that possible in BC?
Thanks for your support!
JD

Lemonte,
You need to add it to an orion-web.xml file. This is Orion/OC4J's web app deployment descriptor.
If you want to setup virtual directories for the default web app, you'd use /application-deployments/default/defaultWebApp/orion-web.xml. Otherwise use the orion-web.xml for your deployed web app.
Cheers,
Mike
Atlassian - Supporting YOUR 'Orion/OC4J' World
http://www.atlassian.com - [EMAIL][email protected][EMAIL]
null

Virtual Host weblogic 10

How a virtual host assumes an application by defult?
          In version 8 was:
          <VirtualHost DefaultWebApp="postMed" Name="nombre"
          Targets="portalServer" VirtualHostNames="www.url.cl"/>
          In version 10?
          <virtual-host>
          <name>nombre</name>
          <target>AdminServer</target>
          <virtual-host-name>www.url.uchile.cl</virtual-host-name>
          </virtual-host>

Hi, ibarragz,
          Do you mean you hope to access your web application like this
          http://www.url.uchile.cl/ ?
          If my understanding is correct, you don't need to specify your application as default. What you need to do is just specify the context-path of your application as "/". You can add the following descriptor to your weblogic.xml
          <context-root>/</context-root>
          When you target the application to the virtual host "nombre", the application would be treated as default web application.
          Please let me know if this is what you want.
          Thanks,
          -Fred.

Web App and Virtual Host and Clustering

          Hi,
          How are you doing?
          What is the best way to deploy a web application using a virtual host on a clustered
          environment?
          Here is what we are doing:
          o Deploy the web application on the virtual host
          o Deploy the virtual host on the cluster
          o Make the web appliation, the default application on the virtual host
          This seems to work, but I have additional questions?
          In the above deployment, looking at the deploy tab for the web application shows
          that the application is deployed to both the cluster as well as the virtual host.
          Even though we didn't explicitly deploy to the cluster! What happens if we deploy
          explicity (i.e., target) the web application to the cluster?
          What other approaches / configurations are you guys using?
          Thank you so much,
          -Bart Simpson


Never mind, I think I have a solution. Even though e-docs say that DefaultWebApp attribute at virtual host level was deprecated as of WL 8.1 (inline with Servlet 2.3 specification) one can directly edit config.xml file and add the attribute.
For instance, here is an example to set webapp APP1 as a default webapp for virtual host vhAPP1:
<VirtualHost
Name="vhAPP1"
DefaultWebApp="APP1"
... />

Apache Virtual Hosts and Weblogic 5.1SP6

Running:
WebLogic Server 5.1.0 w/ Service Pack 6
Solaris 7
Hello, I've been reading through the newsgroups and saw alot of information on
setting up apache and weblogic to handle virtual hosts, but am still having problems
getting it to work.
I have 2 domains that will be served up by one instance of Apache using NameBased
virtual hosts and I would like to have our one instance of WebLogic 5.1SP6 handle
them as well.
Excerpt from my httpd.conf file:
NameVirtualHost 216.xx.x.xx:80
<VirtualHost vcstgws011:80>
ServerName vcstgws011.domain1.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
<VirtualHost vcstgws011:80>
ServerName www.domain2.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www/dsl
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
Under my default server configuration I have the WebLogic stuff:
<IfDefine WL>
WebLogicCluster vcstgas011.domain1.com:7001
Debug on
DebugConfigInfo on
ConnectTimeoutSecs 60
HungServerRecoverSecs 300
Debug on
DebugConfigInfo on
<Files *.jsp>
SetHandler weblogic-handler
</Files>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<Location /servlet>
SetHandler weblogic-handler
</Location>
<Location /Admin*>
SetHandler weblogic-handler
</Location>
<Location /j_security_check>
SetHandler weblogic-handler
</Location>
</IfDefine>
And here's an excerpt from my weblogic.properties file:
# HTTPD
weblogic.httpd.enable=true
# DocumentRoot configuration
weblogic.httpd.defaultWebApp=/opt/vci-10.8/webapps/www
weblogic.httpd.indexDirectories=true
Any help would be appreciated.
Thanks,
Mark

Anyone have success with Name-Based virtual hosts using same instance of WebLogic?
"Mark Mangano" <[email protected]> wrote:
>
Running:
WebLogic Server 5.1.0 w/ Service Pack 6
Solaris 7
Hello, I've been reading through the newsgroups and saw alot of information
on
setting up apache and weblogic to handle virtual hosts, but am still
having problems
getting it to work.
I have 2 domains that will be served up by one instance of Apache using
NameBased
virtual hosts and I would like to have our one instance of WebLogic 5.1SP6
handle
them as well.
Excerpt from my httpd.conf file:
NameVirtualHost 216.xx.x.xx:80
<VirtualHost vcstgws011:80>
ServerName vcstgws011.domain1.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
<VirtualHost vcstgws011:80>
ServerName www.domain2.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www/dsl
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
Under my default server configuration I have the WebLogic stuff:
<IfDefine WL>
WebLogicCluster vcstgas011.domain1.com:7001
Debug on
DebugConfigInfo on
ConnectTimeoutSecs 60
HungServerRecoverSecs 300
Debug on
DebugConfigInfo on
<Files *.jsp>
SetHandler weblogic-handler
</Files>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<Location /servlet>
SetHandler weblogic-handler
</Location>
<Location /Admin*>
SetHandler weblogic-handler
</Location>
<Location /j_security_check>
SetHandler weblogic-handler
</Location>
</IfDefine>
And here's an excerpt from my weblogic.properties file:
# HTTPD
weblogic.httpd.enable=true
# DocumentRoot configuration
weblogic.httpd.defaultWebApp=/opt/vci-10.8/webapps/www
weblogic.httpd.indexDirectories=true
Any help would be appreciated.
Thanks,
Mark

Problem with DNS and/or Virtual Host (works from inside, not from outside)

I am running several web sites (as virtual hosts) successfully on one Xserve (192.168.200), which are accessible internally and from the Internet (via forwarding port 80 on our firewall).
Now I am trying to add another web site (newmini.domain.com), which however is running on a Mac mini (also on the same subnet as the Xserve) at 192.168.100. What I did is make an additional entry under the Xserve's DNS for the domain (domain.com) (+ Machine..., pointing to 192.168.0.100). (I also made the necessary changes to the Mac mini's httpd and hosts configuration--no problem there).
Now, here's the strange thing: All computers on the subnet, whose DNS points to the Xserve, can see and browse newmini.domain.com fine. No problem. The computers ask the Xserve for the IP of the host in question, the Xserve says, "192.168.100", the request goes to the Mac mini, and it serves the web site as expected.
But this doesn't happen if the request comes from the Internet. Instead of seeing the Mac mini, the client sees the default web site of the Xserve... So it appears that somewhere, the virtual host part of the HTTP request is lost between our firewall and the Xserve.
Any ideas? Thanks.

It's not going to.
You say you've setup port forwarding on the firewall. Port forwarding only cares about the port number (80). It knows nothing about the nature of the request (e.g. the hostname that the web request is for). Therefore all extenal connections on port 80 get sent to the XServe. The newmini doesn't see the traffic at all.
If you only have a single public IP address you can only forward port 80 traffic to a single machine. Your options are to either use a different port number, or configure the XServe to proxy the connection to the mini (so now the traffic goes router -> XServe -> Mini -> XServe -> router), although that might not do what you want since it still places load and dependencies on the XServe.

Apache virtual host with OSX Server?

I have been running OSX Server for a while now, and just recently I decided to get McMyAdmin for my Minecraft server. The web client for McMyAdmin runs on port 8080, but I wanted it on port 80. I wanted to use it with my domain, so I just created a sub domain and pointed it to my server. The problem is that OSX Server apparently doesn't let me use port 80, even when websites are turned off. I decided to delete Server and just use plain apache. This worked until I realized that my website was only accessible locally. I have all the correct ports forwarded, etc. But I get the error:
Response Error.
Technical description:
502 Bad Gateway - Response Error, a bad response was received from another proxy server or the destination origin server.
when I try to connect from outside my network. This is probably just some simple thing I missed but it would be nice if someone could just point out what I did wrong here. Back to the point, I want to know how to run the proxy to my web client on port 8080 AND ALSO run OSX Server with or without apache virtualhost.
Thanks in advance,
Eamon

Web is stupidly easy - Apache has extensive support for multiple virtual hosts in a single server and will happily support as many domains/hostnames as you can throw at it.
Mail is a little trickier since it needs to hook into some kind of directory server to validate user addresses.
Mac OS X's Open Directory does support this, but it's a little cumbersome (basically every user has to exist in the main Open Directory domain as well as having a secondary email address(es) in the other domain(s).
This can get especially tricky when you have users with the same shortname in different domains - for example if you give [email protected] a secondary email address of [email protected] and you then get a new user [email protected], you can't give the third 'joe' the address 'joe' in Open Directory since that's already taken. This means he'll have to login using different credentials from his email address. Confused yet? You bet.
If you're prepared to eschew Open Directory you can just use Postfix's built-in support for virtual hosting, but it's a little more complex to setup and support and is entirely command-line based (i.e. there's no GUI for setting it up or supporting it).
So, for that reason you might be prepared to setup multiple virtual machines for each domain. It really depends on how much the domains are related (if at all).

Oracle9iAS R2 - Virtual Hosts with Portal and SSO with OIDDAS application

Hi!
I have installed a the machine with name minsk.discover.local. The machine have installed Infrastructure and Portal. The instalation is sucessfull and i work fine. But i have publish Portal to WEB with name intranet.discover.com.br. The Oracle describe:
1 - Create the virtual hosts in SSO and PORTAL - OK
2 - run ptlasst to create SSO Partners Applications - OK
After this steps iwork fine with Portal and SSO, but when i click in portlet to create user to access the application OIDDAS, the Portal redirect to login page of SSO in address mct.com.br, the internal name, when then name not responde in the internet.
I need a help!!!!
Marcio Mesti

I just spoke to the Oracle App server admins, the two servers in question are clustered.
So my question changes slightly to:
What is the best way to install and configure a webgate for clustered Oracle App servers with mulitple virtual hosts, that are residing behind a load balancer (Traffic Manager)?
Thanks,
Andy

Use require group in virtual host

Hi,
I have set up several virtual hosts in my middle tier, and configured them as partner applications so that OID/SSO can be used for authentication. It works fine, but the only supported method I can see is 'require valid-user' which allows any user in OID access to all virtual hosts. Does anyone know of a way around this using OID (not mod_auth). We want to allow users within a group access to individual virtual hosts.
Thanks,
Karen

Hi there,
I just wanted to clarify my question, has anyone been able to use group authentication using OID to restrict access to websites hosted using AS10g? My website is just plain html, but maybe someone has done something similar by adding a java wrapper to perform the authentication (that seems like overkill to me but maybe there is a more elegant workaround)?
Thanks,
Karen

How to create and access a Virtual Host on the J2EE WAS?

Hello, I have searched through the Forums and help.sap.com and found a lot of information on how to set up a Virtual Host on the J2EE server but am having issues with it working.
The goal is to provide a simple virtual host on the J2EE Portal server to host some static image and HTML files. Previously I had stored these files in the standard publicly accessible SAP J2EE folder location /usr/sap/<SID>/JCxx/j2ee/cluster/serverx/apps/sap.com/com.sap.engine.docs.examples/servlet_jsp/_default/root/. This location is resolved to when using the URL <host>:50000 for example.
The main issue here is that during Portal support pack applications this folder gets wiped out and we have to remember to save off any custom files and folders in this location and replace them.
I would like to create a virtual host to store these static files (i.e., branding-image.jpg, etc...).
I have run through the process of creating the virtual host both using Visual Administrator and <host>:50000/nwa but am not able to get the virtual host name to resolve properly.
The following are the steps that I have taken. Let's assume the standard SAP portal (i.e., xSS, etc...) is running properly on <host>:50000.
1. create virtual host via Visual Administrator/NWA called 'sapwebserver1' by using the Create Host option (takes on the attributes of the 'default' standard virtual host)
2. change the root directory for this virtual server to a custom folder at E:/tmp/mimes (where E:/usr is where the J2EE files are all installed), no start files were set up and nothing else was changed in the new virtual host record, no permissions were changed on the /tmp/mimes folder from whatever the default Windows user permissions are normally set, I am using a local Windows administrator account but I have not seen any reference in the help files or the examples that indicate that any specific permissions updates need to be made on the virtual host root folder
3. restarted the J2EE server as well as the HTTP Provider service
4. before updating the company DNS, I wanted to test this locally on the server and so have updated the server's local HOSTS file with a <host IP address> sapwebserver1 entry
5. from that server I can ping the sapwebserver1 virtual host name and it resolves properly to the machine's physical IP address
According to all of the documentation and examples I have seen I should now be able to (from that server) launch a browser and access the static files in the virtual host by referring to http://sapwebserver1:50000/branding-image.jpg for example. This is not working and the browser just brings up a Cannot display the web page error in IE. By referring to the virtual host name sapwebserver1:50000 it's supposed to hit the J2EE server and based on the host name sapwebserver1 realize that it should resolve to the root directory E:/tmp/mimes. This is not happening. Just as a test I have created a copy of the 'default' virtual host and called it sapwebserver2, updated the local HOSTS file for this entry, and tried to see if that would work like the 'default' host. My expectation was that http://sapwebserver2:50000 would behave the same was as http://<host>:50000 but it too fails to resolve just like the sapwebserver1 virtual host refernce.
Would anyone happen to have any pointers on what to do next? I just want a simple virtual host to be able to serve up some static images and files.
Thanks for any insight or assistance you might be able to provide here.
Graham

This defeats the purpose of trying to centralize SAP-related web resources on the SAP server. Typically IIS/Apache or other non-SAP servers are under the control of IT and not the SAP BASIS group.
We simply would like to have a centralized location to store static web files so that they are not overwritten during Portal support pack applications.

HOW TO DEFINE VIRTUAL HOST NAME IN HPIA64 + SAP R/3 ENTERPRISES 4.7

Hi all,
I am trying to install sap r/3 enterprises 4.7 with OS as HP-UX and Database as Oracle in a cluster environment.
In cluster environment sap installation should be done on virtual hostname ( package id ). I'm using the env variable SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
My cluster is running and I'm able to ping it from network, but at the time of SAP Installation my sapinst starts with the physical host name not with the virtual host name.
What can be the solution ..?
Thanks,
Chandresh Pranami.

Hi Chandresh,
Try executing sapinst with virtual hostname.
eg. ./sapinst SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
This should work.
-Pinkle

How can I connect to multiple WLS instances from a single Apache virtual host

Configuration : WebLogic 5.1 SP8 & Apache
I need to be able to have a configuration that looks something like this.
www.company.com/x -> WL cluster01
www.company.com/y -> WL cluster02
In all the examples that I have been able to find they alway defines the the WL
connection for the entire virtual host, but I need to be able to do it on a location
basis is that possible?
Thanks
Jens Schutt

httpd.conf:
<VirtualHost 172.17.9.24:443>
DocumentRoot "/www/X"
ServerName qawebivesta.qa.livecapital.com
ErrorLog /usr/local/apache/logs/qaweb1.error_log
TransferLog /usr/local/apache/logs/qaweb1.access_log
SSLEngine on
SSLCipherSuite
ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
SSLCertificateFile /usr/local/apache/conf/ssl.crt/server.crt
SSLCertificateKeyFile /usr/local/apache/conf/ssl.key/server.key
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
SSLOptions +StdEnvVars
</Files>
<Directory "/usr/local/apache/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
Debug ON
DebugConfigInfo ON
<Location /ivesta/>
SetHandler weblogic-handler
WebLogicHost qawlgc1
WebLogicPort 7001
</Location>
<Location /TMPPhase2>
SetHandler weblogic-handler
WebLogicHost qawlgc1
WebLogicPort 11001
</Location>
</VirtualHost>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/TMPPhase2 works fine, but when I try to access /ivesta I get a 404 from WebLogic
"https://qawebtmp.qa.livecapital.com/ivesta/index.jsp?__WebLogicBridgeConfig
Weblogic Apache Bridge Configuration parameters:
     WebLogic Cluster List:
          General Server List:
               Host: 'qawlgc1' Port: 11001
          DefaultFileName: ''
          PathTrim: ''
          PathPrepend: ''
          ConnectTimeoutSecs: '10'
          ConnectRetrySecs: '2'
          HungServerRecoverSecs: '300'
          MaxPostSize: '-1'
          DynamicServerList: ON
          StatPath: false
          CookieName: WebLogicSession
          Idempotent: ON
          FileCaching: ON
          DisableCookie2Server: OFF
          QueryFromRequest: OFF
          Build date/time: Jun 25 2001 15:09:34
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This should have been connecting to my 7001 instance not the 11001.
Thanks
Jens
"Eric Gross" <[email protected]> wrote:
What do you mean the wrong port? Post the complete output from
WebLogicBridgeConfig as well as the URL you used.
Also, paste the weblogic relative portions from your httpd.conf
Thanks,
Eric
"jens" <[email protected]> wrote in message
news:[email protected]...
I also used ?__WebLogicBridgeConfig to verify that it did pick up thewrong port.
Here is my build date for mod_wl.so in SP10
Build date/time: Jun 25 2001 15:09:34
Thanks
Jens
"Eric Gross" <[email protected]> wrote:
Make sure you are using the latest plugin. As well, add parameter:
DebugConfigInfo=ON and make a request with a query paramater of
?__WebLogicBridgeConfig and you should then see the build date/time.
We can
then see if you are indeed using the latest plugin.
It is not a possibility to get the source.
Regards,
Eric
"jens" <[email protected]> wrote in message
news:[email protected]...
And the solution where you put the WebLogic parm under location
the
last
location
over rule the previous.
I have also tried to upgrade my plug-in from SP8 to SP10 but that
didn't
make
any difference either.
Is it possible to get the source code for the plug-in, I'm afraid
that
it
don't
follow put's all it's parm's a the vhost level no matter where in
the
conf
file
they are placed.
HELP
Jens
"Eric Gross" <[email protected]> wrote:
Yu is correct.
Here is another way to do it as well:
MatchExpression /x
WebLogicCluster=server1:port,server2:port|PathTrim=/x
MatchExpression /yWebLogicCluster=server3:port,server4:port|PathTrim=/y
The general syntax for this would be:
MatchExpression exp name=value|name=value
Where exp=Mime type(*.jsp) or exp=/x(path)
The next argument in the list is a pipe(|) delimited list ofname=value
pairs (ie: WebLogicHost, WebLogicPort, WebLogicCluster, PathTrim,
PathPrepend, etc..).
Hope this helps.
Regards,
Eric
"Yu Tian" <[email protected]> wrote in message
news:[email protected]...
Hi Jens,
I think you can proxy by ppath.
<Location /x>
SetHandler weblogic-handler
WebLogicCluster cluster1
</Location>
<Location /y>
SetHandler weblogic-handler
WebLogicCluster cluster2
</Location>
thanks
Yu
"Jens" <[email protected]> wrote in message
news:[email protected]...
Configuration : WebLogic 5.1 SP8 & Apache
I need to be able to have a configuration that looks something
like
this.
www.company.com/x -> WL cluster01
www.company.com/y -> WL cluster02
In all the examples that I have been able to find they alway
defines
the
the WL
connection for the entire virtual host, but I need to be able
to
do it
on
a location
basis is that possible?
Thanks
Jens Schutt

How to configure multiple virtual hosts for the same context root /

Hi,
I am using Glassfish V1 U1 - b14 on Solaris.
I am trying to configure two applications to be mapped to the / root context, each one in its own virtual host.
Two things I have noticed:
1. I have to manually add virtual-hosts="hostId" in domain.xml/application-ref ... looks like just simply deploying the app does not do that although the application is set as default for its particular virtual host. Is this a bug?
2. Although I have set for each virtual host the default web-app correctly, and they both respond fine, I cannot map both of them to the / context. The second application (chronologically deployed) does not respond when called with the / context ....
Any ideas? Is this a bug again?
Regards,
Rares
Message was edited by:
raresp

Wow, that's a shame. All mighty Application Server and two different apps on two different virtual hosts are considered ambiguous to have the same context root definition.... Fair play to Tomcat and 90% of the rest of servlet containers!
In my case I have the same EAR we are planning to deploy to many (up to 30) virtual hosts. Faking different context roots for each deployment will bring unnecessary overheads...
Should I file a bug or feature request?
Thanks again for your answer, although you're basically saying it is not possible I will wait and look a while for a possible solution before bringing this topic to a conclusion.

ICal Error: "No virtual host found for iCal Service" - Help!

Trying to set up iCal on OS X Server 10.5.6
Server is up and running and successfully providing web services on its FQDN. Server is not currently used to support network users / services, but as and when it does it will be the Master Opendirectory server.
I have created a couple of test accounts on the server (simply in the Users group) and enabled both for Calendar Access.
I have provided the details of the FQDN on the iCal page, and checked that the default port (8008) has been opened in the firewall.
In web services there is one virtual domain (using name based virtual server) and the default domain in operation. Both appear to be functioning as would be expected.
When I click on 'start service' for iCal, I get this error.
"No virtual host found for iCal service"
I cannot find any information about this in iCal manual, or online documentation. Can anyone here provide pointer to where this information is, or what it means?
Would be most grateful.

Hey there,
See if any of the solutions provided in either of these older threads can steer you in the right direction.
http://discussions.apple.com/thread.jspa?threadID=1201737
http://discussions.apple.com/thread.jspa?threadID=1242823&start=0&tstart=-3
B-rock

DefaultWebApp on virtual host

Similar Messages

Maybe you are looking for