Defective material transfer to store

How do we transfer the defective material which is to be refurbished from field to store so that it gets valuation as well as stock update kindly let me know the path

hi
you can use 501 movement type in MB1C or you can use MIGO T code ( select goods recipt- others)enter the material , plant and storgare location where you are going to place since you are moving a defective material in to the stores without purchase order,
vlaution type is defined by MM people since a defective material will have different value to the intial condition .
refer the following link <b>http://help.sap.com/saphelp_46c/helpdata/en/fe/67ec5c9d6f11d189b60000e829fbbd/frameset.htm</b> and check the <b>Processing Material Refurbishment Without Serial Numbers</b>
regards
thyagarajan
Message was edited by:
        thyagarajan krishnamurthy

Similar Messages

  • Materia transfer Procedure for asset  material within the plant

    Hi
    We need to set the process in SAP for asset material transfer from onle location to another within the plant and also send back defective one back to vendor.
    Please suggest the procedure to do the same SAP.
    Regards
    venkat
    Edited by: garapati on Feb 29, 2008 6:35 AM

    hi,
    clarify that material code is used or not.
    if material code is used then use 301 mov type.
    regards
    points if solved/helpful
    Edited by: RAMESH ARORA on Feb 29, 2008 12:04 PM

  • Stock transfer between stor locations - copy in reference data

    Dear all,
    We would like to implement a process in SAP MM that is as follows.
    However so far we have not been able to find a suitable/good solution for the below step number 5 below
    Proces in general: A number of Materials are to be received in storage location 1 but to be stocked in storage location 2 of the same plant.
    We configured it like this so far:
    1                    MM01 - Material master created in both storage locations. In the field MARC-LGFSB ( external procurement stor.location) we have filled in storage location 1
    2                    MD01 - mrp runs are executed ; results in Purchasing Requisitions created for storage location 1
    3                    Purchase requisitions are converted to Purchase orders
    4                    MIGO u2013 goods receipt for the purchasing order , hence receipt into stock of storage location 1
    5                    MIGO_TR u2013 stock transfer posting stor.loc 1 to stor.loc. 2 . At this point we would like to be able to reference/copy the data of the step 1 into this transaction in order that the data does not have to be re-entered manually. We canu2019t find a way how to do this. Should we use other functionality to enable this? In the end what we are after is to avoid typing in data twice.
    Your help would be much appreciated.
    Cheers,
    Arjan
    Edited by: A. de Vries on Oct 27, 2010 5:41 PM

    Why don't you receive the goods directly in the storage location where it is "stocked"?
    If you still adhere to your idea you maybe could trigger an output (via message determination) when posting the GR in MIGO. The output would create an IDOC which posts the goods movement (check IDOC "MBGMCR02"??? --> this IDOC uses function modul "MB_CREATE_GOODS_MOVEMENT" )
    This needs some development...

  • TQM Total Quality Management for Non Planned Defective Material Containment

    HI SAP Experts,
    My overall goal with this posting is to try and get a better understanding of some of the SAP best practices that have been implemented at other companies for defect containment in a global company (we have operations in China, Japan, USA, EU, Korea etc).
    We are in the project charter phase to re-define how we identify and contain our non-planned defective materials / processes.   Historically we have used external custom applications written in ASP Visual Basic Intradev 6.0 to manage many of our processes including Defective Material Containment.   We have found that these processes are not scalable and not sustainable and looking to SAP applications to help provide solutions.   
    Our current process flow is basically as follows  --> Request Notification (with approval) --> Purge (Identify stock locations globally material exists in and pull inventory into a consolidated location where it can be controlled - Inspection, Materials, Customer Service etc) and Finally disposition - these processes are doing in SAP with QM notifications for materials.   You can see my disparate issues - no integrated reporting, responsiblity nor follow through.
    The process is quite cumbersome (multiple data entry points, duplication of data) and not scalable. The only integration we have with this custom ASP application is that is used to provide the current inventory levels (in stock) at the time of the Containment was approved and the use of material status to lock parts so movements can not be performed during this initiative.
    My basic thoughts on the process in SAP is as follows: 
    1.  QM-QN Quality Notification (identify compliant, related tasks and approval to proceed with containment).
    2.  QM-MM Identify and Contain Parts globally using MM  (Task - separate notification completion driven as follow-on activity and notification record linked to primary notification)-->
    3.  QM -  inspection lot for Quality to identify inspection criteria for non planned defect and generate defective Notifications  for each defect found to ensure data integrity and historical tracking of problems.
    4. QM - Completion and disposition of Inspection lot.  Related notifications may still be open or not depending the owners disposition. 
    5. QM  That same owner also has the decision to tighten or loosen inspection requirements for that material and vendor.
    Basically I'm curious if I am even close in this process of going the right direction or not.   And is why I hope others might be able to share the process that they have implemented that identify (non planned) defects and containment processing.
    I'm interested in any ideas you have on the basic high level concepts to ensure I am choosing the right modules and / or processes.
    R/3 or SAP ECC6.0 is a little cumbersome to manage all these processes so we are also looking to see if any SAP customers have used Portal for such a processes. 
    If you do have a process map / flow with some screen shot's to share that would also be a great asset to us as we begin planning this project.
    Thanks and Regards,
    Edited by: Ed Bunn on Feb 1, 2010 3:45 PM
    Edited by: Ed Bunn on Feb 1, 2010 3:45 PM

    Ed,
    I think you fitted your entire process in this single thread. I am not clear whether your containment stock across all these countries are releated to vendor complaints or is its also a mix of your in process rejections too.
    Suggestion 1,
    If this containment across plants are related to vendor related defetcs, use Q2 notification for vendor rejection. through this notification defects can be captured, task can be assigned to vendor for completion. Status of thsi task can be monitored and captured through notification both at a line item level and header level. 8D, CAPA and all will be incorporated in this notification. This forms a closed loop for vendor defect analysis.
    Suggestion 2,
    Consolidating containment stock from different plants across countries can be done through action box facility- Transfer stock posting.
    Transfer post from unrestricted to block or Transfer post from Unrestricted to Quality or Transfer post from Blocked to Quality.
    Its better you can create a seperate storage location and go ahead with this consolidation.
    Now you can decide, this consolidation happen across plant level or towards one corporate plant level, anyway plant is mandatory when you deal with inventory.
    I hope this thread will throw some light towards your requirements.
    Concluding QM-QN is having a best practise closed loop, if it is mapped well as I have worked with this functionality very well. Workflow is another activity which you can think of, if you need a control on this plantwise.
    Vendor wise inspection controls can be activated through Dynamic Modification Rule T Code: QDR1and Quality Level controls T Code: QDL1.
    Thanks,
    Vineeth
    Edited by: Vineeth Varghese on Feb 2, 2010 7:04 AM

  • HT1918 Is there a way to transfer iTunes Store purchases or an iTunes library from one user to another?

    Is there a way to transfer iTunes Store purchases or an iTunes library from one user to another?
    Historically, I have my own laptop and my 8 year old daughter has a laptop as well.  I also have an iPad and iPhone.  In the past, I have managed all devices with the same apple ID, and used my laptop as the main library, storing all music, apps, video, etc.  I then  just selectively copied things to the other authorized devices, so my daughter's laptop has a copy of her music under my apple ID.  Now she has her own iPod touch, so I would live to move her music and apps to her own iTunes library with a name I create for her on her laptop and iPod.
    Is this possible without having to repurchase all of her media?

    Welcome to AD!
    You can try these Apple directions
    http://support.apple.com/kb/HT1329
    Or buy a 3rd-party ipod manager such as CopyTrans.

  • Is it possible to create a new iCloud account and permanently transfer existing store purchases to it?

    Is it possible to create a new iCloud account and permanently transfer existing store purchases to it?

    Thank you for taking the time to try to answer my question. Let me phrase it slightly differently...
    I have a very old appleid that I've used for store purchases. I had a MobileMe account that was upgraded to iCloud. I'd like to merge the account data. I've been hoping Apple would come up with a solution to this, but they haven't yet.
    So, I'm wondering if I should make a new account of some sort and try to transfer data to it from both of the old accounts. It sounds like that can't work.
    I suppose then that the only thing to do is manually transfer all the information from the old MobileMe account to the primary appleid (which is some sort of iCloud + Store combination, no?). That might not be that hard to do, but it is somewhat high risk.

  • Material to Material transfer with movement type 321

    Dear Experts,
    Material to material transfer with movement type 309, the system create a price difference account if price control "S"
    but we transfer material to material with movement 321 (quality ), no price didderence account is generated, system showing different document
    Exp--- Material "A" with STD price 150
    Material "B" with STD price 100
    document is created
    Material A A/c. Credit 100
    Material B A/c. Dr. 150
    My question is, the price difference where is adjusting, is finance and costing books of account will effect.
    Kindly help to solve the issue
    Thanks & Regards,

    Dear Wasim,
    321 movement is to transfer the stock of a material lying in quality to unrestricted stock.
    It's not used for material to material transfer.
    Check and revert back.
    Regards
    Mangalraj.S

  • Material transfer from SAP R/3 to SAP Business One is blocked

    Hello experts,
    Please I need your help for the following scenario:
    Our client has B1iSN and SAP R/3 in the headquarter company and B1if and SAP B1 in the subsidiary. The material transfer from SAP R/3 to SAP Business One failed and the following message is diplayed:
    Result message :
    com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: DI Error: (-2028) No matching records found (ODBC -2028)
    The Material database transfer is blocked due to message in status
    failure which block all other messages.
    We tried to restart the server (Business One and B1iSN) but it didnu2019t solve the issue.
    Any idea please? Thank you.

    Hi Nadia,
    did you check the WRITE-POLICY settings of your scenario?
    when reading the displayed DI Error message, it looks like B1iSN is trying to update an B1 item which does not exists.
    Please open SAP B1iSN Tools -> Development Tools -> Graphical scenario Design and select your Bizpackage, BizStep and BIUMETA.
    Open the WRITE-POLICY symbol and check the entries:
    Insert on Exist = error or fallback2U
    Update on Miss = fallback2I
    The Update Policy should stay to value regular.
    To activate changes of the WRITE-POLICY please deactivate, modify and reactivate your Business Process instance.
    If a WRITE-POLICY change has no effect, please check your data mapping (BIU) and especially the parameter <QueryParams>, which mustn't be filled for "insert/Add" operations into B1.
    Best regards
    Bastian

  • How to transfer App Store purchase applications from my iPhone with apple I'd to my iPad

    How to transfer App Store purchase applications from my iPhone with apple I'd to my iPad without entering apple is to iPad. My iPad is at remote location

    Your post is unclear.
    ramtirath wrote:
    ... without entering apple is to iPad. ...
    What does this mean..?
    What are trying to achieve..?
    Download Past Purchases  >  http://support.apple.com/kb/HT2519

  • Material Transfer from Storage Location 2 Storage loc

    Hi Gurus,
    Here Client want to transfer Material from 1 loc to another. Std T Code is MB1B with Mov Type 309. But here we have to enter material, qty,& batch no.But client's requirement is that he dont want  to enter all these things.He want to select the material,batches collectively sothat seperate entry should be minimised. Is there any functionality through which we can transfer the selected materials?
    Please reply soon its urgent.
    Regards,
    Mayur

    Hi mayur
    First of all 309 movement is ussed for Material to material transfer
    like our friend said for storage loc to storage loc. you need to use 311
    Now when you go to MB1B then goto Edit in that you can see default value
    enter your default value , so after that you need to choose only material and batch
    collectively
    Thanks
    Bala

  • Buget Exceed problem regarding material transfer in project system

    Hello Sir,
    I have a problem regarding budget in project system.
    when i do budget and release . and do any transaction
    with that budgeted wbs element in particular project.
    i get budget excced errors usally.
    however, budget remains more than exceeded buget.
    Let us touch with a example in brief, we have a buget for a L&T project 10 Lakh.
    Buget                                         Release                                          actual cost                                            total cost commitment
    10Lakh                                       10Lakh                                             8lakh                                                         1Lakh
    when i transfer a material from another project to this L&T project material worth is 50thousands.
    i get a errors for L&T project budget exceed with 40thousands.
    however in project budget remains 1Lakh remaining .
    why system shows errors for this material transfer worth rs 50thousands
    Please help me regarding this problem where is 1lakh budget
    with regards
    sanjay agrawal

    Hello sir,
    there is no any problem regarding budget supplement but if project sometimes
    remains 20lakh buget price remaining out of 50lakh.
    and need 1 lakh material price for transfer in project
    then why need to do budget supplement for 1 lakh if project
    remains 20lakh price rest.
    please guide me for above problems
    with regards
    sanjay agrawal

  • How to find out the Idoc number triggered for any material transfer frm SAP

    Hi Folks,
    Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
    Do we have any navigation for that in MM03?
    Thanks,
    SPMD.

    Hi Shabbirmdpasha,
    If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
    Also would suggest to post the same in abap forums for more answers:
    ABAP Development
    Regards,
    ---Satish

  • Material transfer procedure from Valuated Plant to Non- valuated plant

    Material transfer procedure from valuated plant to Non valuated plant through MIGO - MVT. 303 (Remove from Storage ) & reveiving through MIGO - Mvt. 305 (stock in Place )
    By using above method can we indetify stock of same material in cost centre wise and WBS - Project - code wise in MMBE.

    Hi
    same material but Qty. wise post  in defferent project code (two or three )  and cost centre. but in MMBE we can see only Qty. not project code wise or cost centre wise.
    After few days If we want ot issue mateiral against Prioject then how can we identify the project code.

  • Error when doing material transfer

    hi expert,
    when doing material transfer from plant 0001 to plant 0002, error pops up :
    "maintain vendor for the customer 1234 attached to supplying plant 1234"..
    what should i do??
    thanks

    Dear,
            Use XD02( Customer Master Record )  and GOTO -- Genera Data TAB and select Control Tab and under control tab u will find in top VENDOR field.
           and for VENDOR Master Record use XK02 and select Control TAB under which at top u will find CUSTOMER FIELD.,
    Regards
    AJIT K SINGH
    HAPPY TO HELP U
    Edited by: AJIT K SINGH on Dec 1, 2009 2:01 PM
    Edited by: AJIT K SINGH on Dec 1, 2009 5:04 PM

  • "In material transfer profit centre link is mandatory" how to do this

    Hi Friends,
    How to do this validation , can any one guide me.
    "In material transfer profit centre link is mandatory"
    Regards
    Mahesh A

    Hi
    While creating material choose costing view1,you will find there profit center its required field there,maintain costing view1 to material master all your material master and maintain profit center it will come automatically in grn accounting doc and same you can see in accounting tab
    Regards
    Kailas ugale

Maybe you are looking for