Deficit of BA Blocked qty EA : material plant sloc batch ,Message no. M7021

user gets this message while trying to perfrom MB1a (mvmt type 555), i have checked stock is available under ls26 and mmbe no restrictions on material or batch not sute why getting this error.pleaes help

Hi,
Please note the mov type 555 - is for withdrawal for scrapping from Blocked stock.
Hence please check whether enough stock is available in Blocked stock for the material in the Plant/SL/Batch using the reports MMBE or MB52.
Thanks & Regards,

Similar Messages

  • Deficit of VC Unrestricted-use 100 EA : in combination of material plant sloc K Message no. M7021

    Hi SAP Gurus,
    I was doing Goods Issue to a cost center from the Vendor Consignment stock having maintained MRP Views in Material Master created Purchase Order through T-Code MD04. I did goods receipt w.r.t Purchase Order and in MMBE Vendor Consignment stock is 100. Still i got this error shown below.
    This is Error: Deficit of VC Unrestricted-use 100 EA : PC-PROBE SKS1 SK01 0000000420 K
    Message no. M7021
    Diagnosis
    Shortfall below the specified stock level or quantity amounting to 100 EA.
    System Response
    If the message is an error message (E), the above is not allowed.
    If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
    Procedure
    In the case of a warning message, check the quantity entered.
    In the case of an error message, change the quantity or terminate processing.
    Note:
    The abbreviations in the short text of this message can have the following values:
    BA = batch
    OR = order
    PL = plant
    PR = previous period
    PU = purchasing document
    RE = reservation
    SL = storage location
    VC = consignment stock from vendor in storage location
    Can you Please help me out of this issue.
    Thanks in advance
    Murali

    This message is a multi-purpose message, probably meant for good it is unfortunately confusing to many users.
    This message is only customizable (warning/error) in case it is triggered from an availability check. e.g. if you have reserved 20 from your  stock of 100  and you try to issue the 100. Then system is telling you that you have not enough stock but in case of a warning you can continue, for the system it is okay for your reservation probably not, but your decision to go over the warning overrules SAP.
    But if you have 100 and want issue 200, and do not have negative stock, then this message comes as error and all your customizing (set to warning) is not taken into account.
    As you are just posted it can as warning message, I have to assume it was because of a dynamic availability check . You should analyze your availability in CO09 transaction

  • 'Reserved'  qty from Tcode MMBE in zreport for (Material, Plant & SLoc)

    HI,
    In MMBE for combination of Material, Plant & SLoc -->
      We have column displayed as "Reserved".
    I want to display this Qty in z report.
    I searched in all Stock related tables - like MARC, MARD, MBEW, S032...etc.
    But unable to find the total of Reserved Qty.
    Shall I use RESB for this?
    But it has thousand of records (for same Mat, Plant & sloc  combination)...
    Which "WHERE"  conditions will work?

    try with the field bdmng in rseg.
    Edited by: Keshav.T on Jun 29, 2010 12:20 PM

  • Call BMBC with specific material plant and batch

    Hi, ive searched and tried several option to call t-code BMBC Batch Cockpit from a report with a specific material, plant and batch and untill now i was unable to do this.
    Is my last option a batch input?
    It seems that all those subscreens make BI my last resource.
    Thanks for your help.

    Hi,
    For,
    Step 2 :- Check your Data type of Characterstic.It should be Numeric.
    Step 3:- First you have to assign Organization Area in Class Header then only you will find that field active in Characteristic screen.
    Regards,
    Dhaval

  • Need FM/BAPI to get matdocs and mvt history by material, plant and batch...

    Hello Experts,
    Are there any available FMs or BAPIs to get the material documents and its movement type?
    Just like in transaction MB5B(Stocks on posting date)
    Hope you can help me guys. Thank you and take care!

    As I said, I need an FM or BAPI and not a standard transaction.
    Thanks.

  • BAPI/FM ro retrieve stock based on material plant batch combination

    Hi Experts,
    Can anyone help me in giving information about the FM or BAPI that would fetch inventory/stock for the material plant and batch combination. I refered to some of the BAPI's like BAPI_MATERIAL_STOCK_REQ_LIST , MD_STOCK_REQUIREMENTS_LIST_API but these do not have batch numebr as a parameter.
    Can anyone help me on this?
    Thanks in advance,
    Rashmi

    Hi Heinz,
    In the sales order you can go to the Item -> Schedule lines and you can split it.
    Did you resolved if so shall i know how.
    Regards
    Agasthuri Doss

  • Material block for sale in plant-storage location level

    Dear experts,
    Please help me how to block a material to sale in plant-storage location level.
    Thank you.
    Regards,
    Badruddoza

    The standard sales block (MVKE-VMSTA) in material master is valid for sales organisation / distribution channel combination (VKORG, VTWEG) - this means you cannot do it for Plant / SLoc combination,
    What does it mean to block it at plant / sloc level? Generally in SO you do not specify the storage location. Or you are speaking about MRP also? In this case you could use SLoc-MRP (with proper availability check in delivery) for your material but the problem is that a plant might be assigned to several sales area and this SLoc would be hidden for them also.
    Could you please specify what would you like to achieve, what sales block means according to you?
    Regards,
    Csaba

  • Need to remove 'Returns' Qty from the plant (MMBE)

    In stock overview MMBE, there is no unrestricted qty. but there is some Qty in "Returns", how we need to remove this Qty from this plant..there is no stock in transit for this material for this plant? but there is some stock in transit in some other plant.
    I am not sure what the purchase order/STO is.  I have reviewed all of the past stock transfers with this material on them and cannot find one open, they need to get this material removed.
    Please suggest how we can remove this Returns Qty from this plant (MMBE)?
    Thanks in advance
    Suresh..

    if you have stock in returns status in MMBE, then you can move it into unrestricted status with 453, into own blocked status with 459.
    this returns stock is created when you post a goods receipt to a return delivery. returns stock is not financially owned by you, it is non-valuated stock until you transfer it with an extra movement (453 or 459) into own stock.

  • Delivery cannot be created (only 0 qty of material available )

    Hello All,
    I have created a sales order for material A on plant B for  one qty. The delivery date is 29.12.10 but the system has confirmed the schedule line with a delivery date of 3.1.11. The material availibilty date is  28.12.10.
    But when I create the delivery, the system gives message, "Delivery cannot be created (only 0 qty of material available )".
    I have checked MMBE and CO09 , there is a stock of qty 2 for material A for plant B. Also there is no other sales order consuming the stock in CO09 for material A in plant B.
    The schedule line catergory is CN(not relevant for MRP)  in sales order and that is why I cannot see sales order requirement in Md04/Co09. But in any case since the stock is available, the system confirmed the schedule line for 3.1.11 in sales order as said above.
    While creating delivery, we are giving a delivery date of 28.12.10 (equal to material availibity date ). I have not checked the availibilty check group but even if checking group= no check, still I think ,the system will confirm schedule line since stock is available and it has confirmed stock in sales order as said above
    But still we cannot create delivery and receives the error, "Delivery cannot be created (only 0 qty of material available )"
    Pls help.
    regds
    Pamela

    Hi Pamela,
    It seems that material A is not available in plant B on 28.12.2010 even if the stock is shown as 2 qty in MMBE
    Please go to MMBE place the cursor on storage location and the check the Warehouse stock for that material.
    It may be that material qty 2 which is currently shown in stock overview is lying in interim storage type 916 against some goods movement (601) issued against some other sales order.
    Also check whether negative stock are allowed in that storage type. In your case , I think they are not allowed.
    I hope this helps
    Br,
    Tushar

  • Can you block a vendor per plant

    Hi there,
    Is it possible to block a vender per plant (i.e. it should stop us upon creation on purchase order already). Please note that the company I work for only has one purchasing organisation.
    Regards

    Tha's fine, it will not block the material but it is blocking to procure that materal from that vendor
    again as i told you that, if you are using the source list funcitonality then this is very much useful otherwise it is extra work for your organization.
    now it's depend on you and your client how to go about it
    but one thing is sure that sourcing funcitonality is very useful for any organization.it is giving oyu a more control on purchiasing.

  • Function module to get detials of blocked stock of Material

    Hi al.....
    I like to know the function module to get details of blocked stock of material
    for particular plant.... like blocked by sales order or damaged material ..etc..
    Thanks...

    Hello ,
    just check this FM
    please just read the document of the FM.....
    ME_CONFIRMATION_READ_GR_BLOCK
    RV_MATERIAL_STATUS_BLOCK
    MATERIAL_MAINTAIN_DARK_DB
    MATERIAL_MAINTAIN_DARK
    MATERIAL_MAINTAIN_DARK_PR
    MATERIAL_MAINTAIN_DIALOGUE
    MATERIAL_MAINTAIN_DIAL_RETAIL
    MATERIAL_MAINTAIN_DARK_RETAIL
    This May help....u.....
    Thank u,
    santhosh

  • Maximum Qty of Material

    Can we specify 'Maximum Quantity of a Material' anywhere.
    Suppose i have a Material in Stock of 100 qty.
    And Still to deliver (open PO qty) = 250 qty
    And a new PO is created again for 200 qty. I want to block the creation of PO when, stock qtyopen po qty qty in new PO exceeds 500 .
    Is is possible, pls help.

    You can use a validation . so that when you save the PO . The system checks  the Po qty+ open qty etc and gives a error message .
    take help from a abaper
    rewgds

  • GR Blocked Qty

    Dear Friends..
    Please tell me how can I get GR Blocked Qty from 0IC_C03 Cube?. I'm getting all values and Qtys but I'm facing the problem in this GR Blocked Qty only, the movement types are 103 and 104. This documents numbers it self is not picking from 2LIS_03_BF datasource in ecc, I filled setup table with all possible options, but it is not picking, so how can we get it in BF, if atleast I get Material document number then based on that I will enhance the datasource.
    In ECC we can see it in MMBE --> GR Blocked QStock Qty.
    For Blocked Qty  we have direct key figure called  0BLOCKEDSTK, but wht is for GR Blocked Qty?.
    Note: in MB51 we can see the movement type wise 103 and 104 data, th same I need, wht BF datasource is not picking that movement types data from ECC.
    Thanks
    Ganga
    Edited by: Ganga on Oct 1, 2009 7:08 AM

    Resolved my self

  • Error  "O qty of material available" in VA32 deliver

    Hi Experts
    When i select the deliver option in line item of va32 it shows   "O qty of material available"  available.
    A thorough check has been done for availablilty  of material using various tcodes and the stock exists.
    And also the material has not been blocked for any other order.
    kindly suggest in detail how to solve this  .

    Hi Martina Floriette,
    check for the storage location in order and material availability in the same Storagelocation
    Hope It  will Help U.
    Regards,
    Neelima.

  • CIF interface: Error transfering material plant

    Hello Experts,
    I am traying to transfer a material plant across CIF interface. The problem is, when I activate the integration model, it fails. The error message is exactly this: "Location does not exist for external location 1790 , type 1040, and BSG BS"
    Any idea what the reson could be?
    Many thanks
    Aban

    Hello Aparna,
    I created a new IM and trying to CIF only location. But this time I get another error message complaing that location 1790 type 1002 already exists:
    "Text:        Location 1790 of type 1002 (BSG BSG1) already exist"
    I checked the table /SAPAPO/LOC in APO and realized that location 1790 exists as type 1001. Now I changed it and would like to CIF it as type 1002.
    How should I proceed if I change the location type from 1001 to 1002?
    Another question: I tried to debug the CIF transfer by implementing an endlos loop in include "ZXCIFU08" (enhancement CIFLOC01) but this seems to have no effect. Is this the right enhancement (on ECC side)?
    Thank you for your help
    Aban

Maybe you are looking for