Deficit of EKLA-LWSBB

Dear Gurus;
I have the next issue when I tried to make a material document cancellation with movement type 108, I used inbound and outbound deliveries scenarios.
The system show me the next messages:
Error:
Deficit of EKLA-LWSBB 22.750 TS : 202031 XK01
Message no. M7328
Diagnosis
This message can occur in the following situations:
u2022 At goods receipt:
The quantity planned for the inbound delivery falls short by 22.750 TS.
u2022 Upon a reversal or return delivery:
This posting will return 22.750 TS more than the quantity posted at goods receipt with reference to the inbound delivery.
Fact:
I used movement type 107 (Goods receipt to valuated blocked stock) with MIGO transaction code and 109 (Goods receipt from valuated blocked stock) with VL32N transaction code.
The material document didn't Reference Document Number (ME23n) or Delivery Note (MIGO), can this affect?
Can you help me to understand how the system works?
Thanks and regards.
JSánchezL

Hi
Were you able to figure out how to cancel that material document? I have the same issue now and it does not cancel the material document in MBST or MIGO-Cancellation.
I had 3 inbound deliveries and 3 corresponding 107 on a PO line and someone somehow deleted the inbound delivery that matched one of the 107 then entered a new delivery document with all same qty information. But the older 107 does not recognize that. You can not do 109 on that 107, neither you can reverse that
Can you please tell me what you did in your situation? I have to reverse this 107 to cancel attached FI postings before month-end.
thanks in advance.

Similar Messages

Deficit in Storage Location quantity

Dear All,
I did the delivery on 31.11.2010. The delivery is reversed on 5.01.2011. The stock is updated in the plant (verified with MMBE). When i try to do delivery with the current available quantity of the plant with delivery date as 04/12/2010, i got an error message " Deficit of unrestr SL stock xxxxx". So i created a delivery again with the reversed quantity in order to reverse it on 04/12/2010. when i try to reverse the delivery with date as 04/12/2010, i got an error message " Cancellation date 04.12.2010 is before the goods issue date 05.01.2011, message number vl626". The MM period for December is still open and finance department is not allowing to post it on the current date. How to do the backdated delivery(04/12/2010). Please suggest me the workarounds.
Regards
Sankar

hi
Go into VL09 with your delivery document number, hit execute and then change the Reverse Goods Issue Date:
You can do this by ticking the Delivery Doc No. and then hit the Define Dte botton, which will prompt you to change the Local Date, try entering 04.12.2010
Not sure but may help

Deficit of stock even though there is stock

Dear All,
I have one proble during PGI,
system shows me message M7 021 'Deficit of & & & & stock' even though there is a stock according to transaction MMBE, MB5B on posting date.
I transport this batch thru 101 movement against Production order thru tranasaction MB31.
Thanks
Chetan mistry

Dear all
Thank u very much for reply
We found the solution and finally after period reopen we get all the stock in available stock.
The only problem is that we open and close period twice and during it some batches are posted for this material and than stock for previous period is not available.
Thanks and regards
Chetan Mistry

Error while doing GR : Deficit of PU GR quantity 5 EA

I am getting the below error while doing the reversal of GR:
Deficit of PU GR quantity 5 EA : <material><plant><pur grp>
Please let me know the solution to rectify it.
Thanks in advance.

Hi,
Check the latest goods issue docs for this quantity and cancel that GI doc. This will bring the required stock to enable you cancel the GR. After creating new GR, cancel the "cancelled GI doc" to complete the loop.
or
Increase the stock by doing GR against 501. After new GR, cancel this 501 doc.
or
Post issue return (202) for this quantity. After new GR, cancel this 202 doc.
or
thro' physical inventory, you can add the stock. After new GR, make another PI doc. to set right the stock.
While the first option is a best one, based on your urgency/superior approval, you may opt for other options also.
Regards,
Siva

While Posting 122 getting error M7021 "Deficit of PU GR quantity 2 EA : 1100000000 1000 G102"

Hi Experts,
While Posting 122 getting error M7021 "Deficit of PU GR quantity 2 EA : 1100000000 1000 G102".
Scenerio : Have received 4 peices of this material with Goods receipt using 105 document and want to return 2 pcs back to Vendor using 122 movement type and getting this error.
Please let me know the problem as when checked with OMCQ it is showing Warning but inspite i am getting error.
thanks

Hi Abhishek,
Please find enclosed the screen print for 122 mvt type and Document used is of 105 mvt type.
Material Document 5000000097 is used for return delivery.
Thanks

Deficit of stock in Posto Goods Receipt of inbound delivery

Hi folks. I´m trying to post goods receipt of an inbound delivery (return order), but for one material we get this message:
Deficit of BA Unrestricted-use 21 CRT : 697-0 0001 3002 DEVOLUÇÕES
I don´t get it, since it seems to me that its calling a deficit of 21 crates of the material 697-0, but this is an inboud delivery! I don't have any stock of this material at this plant.
Any suggestions?

The message looks it is checking for batch. Go to t.code 0VLP (Zero V L P), select the item category of the inbound delivery and go to the details. In the warehouse control and packing data you can find a field No batch check. Check this field and test again. Also make sure, the AutoBatchDetermination box is UNCHECKED.
Regards,

Deficit of VC Unrestricted-use 100 EA : in combination of material plant sloc K Message no. M7021

Hi SAP Gurus,
I was doing Goods Issue to a cost center from the Vendor Consignment stock having maintained MRP Views in Material Master created Purchase Order through T-Code MD04. I did goods receipt w.r.t Purchase Order and in MMBE Vendor Consignment stock is 100. Still i got this error shown below.
This is Error: Deficit of VC Unrestricted-use 100 EA : PC-PROBE SKS1 SK01 0000000420 K
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 100 EA.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
Note:
The abbreviations in the short text of this message can have the following values:
BA = batch
OR = order
PL = plant
PR = previous period
PU = purchasing document
RE = reservation
SL = storage location
VC = consignment stock from vendor in storage location
Can you Please help me out of this issue.
Thanks in advance
Murali

This message is a multi-purpose message, probably meant for good it is unfortunately confusing to many users.
This message is only customizable (warning/error) in case it is triggered from an availability check. e.g. if you have reserved 20 from your stock of 100 and you try to issue the 100. Then system is telling you that you have not enough stock but in case of a warning you can continue, for the system it is okay for your reservation probably not, but your decision to go over the warning overrules SAP.
But if you have 100 and want issue 200, and do not have negative stock, then this message comes as error and all your customizing (set to warning) is not taken into account.
As you are just posted it can as warning message, I have to assume it was because of a dynamic availability check . You should analyze your availability in CO09 transaction

Stock deficit when line item changes in sales order

Hi expert
i am using 4.7,i am getting deficit when i am pgi for sales order
Scenario
i have assigned serial number for material
i have sales order of 5 lines item with total QTY 5, with sales order, i make PR,purchase order and migo, now some reason one of of line item od sales order get rejected, so we reverse all the step of migo and PO, then we create a new line item for sales order, then PR,purchase order and migo.
Now i am doing PG for that Quantity i show deficit of 1 Qty,
But in MMBE be agiant the sales order its showing me 5 Qty.
If it is development, how do we achieve this.
Let me know if you need more details on this. Appreciate your possible solutions to this.
Thanks
Rgds
Nabil

solve by own

Deficit of Stck w.vend.unr.prev : Goods issue using BAPI_GOODSMVT_CREATE' subcontracting PO

Hi Experts,
I am facing one issue while doing Goods Issue for sub contracting PO . In my case, inbound idoc will trigger the BAPI 'BAPI_GOODSMVT_CREATE' with movement code '07' and movement type as 543.
But it throws the error Deficit of Stck w.vend.unr.prev 438.793 THD : U329557 0113 VARIOUS O. U329557 is the child material of finished material 0003121XAZ. When i checked in MMBE, for the given material/storageloc/batch it has sufficient quantity.
I debugged the whole scenerio and found that from one table T156F in FM 'MB_MODIFY_STOCK_ENQUEUE_ENTRY', the value <m> is ASSIGNED from (t156f-felds) with value 1126.190. Later it subtract the value, provided in structure GOODS_ITEMS of BAPI BAPI_GOODSMVT_CREATE with quantity 1564.983 which is to be Goods issued from vendor.
1564.983 - 1126.190 = 438.793 .
Please help me why i am getting this Deficit error even when quantity is present for child material.
Thanks
Shahab

Hi Experts,
Please help me in this issue.

Asset under Construction through Internal order- Functional deficit?

Hi Experts,
I have created an internal order and all the expenses incurred for the asst under construction are being booked at this internal order.
While settling the internal order the system always picks up the month end date as the settlement date and hence the balance of internal Order is getting transferred to AUC on month end date (say31.07.2007).
So,
The date of transfer of balance from internal order to AUC is month end date that is 31.07.2007.
But in Actuality the AUC got complited before month end (say 15..07.2007) and the Asset was put to use on 15.07.2007.
Now the system is not allowing to settle the AUC to Main Asset as on 15.07.2007 as the AUC was not existence on that date. <b>Error:</b> Posting not possible (Value date earlier than capitalization date).
I am able to transfer the balance in AUC to Main Assets as on 31.07.2007 but in this case my client is loosing the depreciation element on this asset from 15.07.2007 to 30.07.2007. Is this the functional deficit in SAP? Is there any way through which depreciation can be availed from 15.07.2007?
Thanks & Regards,
Bijay kumar Deo

You can settle the AUC value in one period and posting can be made in another period. in the same you can give the different asset value date in KO88 screen. The only limitation is this possible only if the fiscal year is same.
Give the asset value date as 15.07.2007 in KO88
Hope this will work
Radha

Deficit of BA stock in Quality Inspection

Hi All,
I have a situation that's a bit complicated. I hope I don't confuse anyone. I'm trying to do a UD for an item, but I'm getting a Deficit of BA stock in quality inspection.
We purchased 200,000 of an item and a GR was done. This was done during inventory, the item was physically counted and someone made an error in the count. At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000. I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system.
Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
When we attempt to do a usage decision we get the following error message:
"49,000 EA incorrect posting to block stock, error msg:
Deficit of BA stock in qual. insp 49,000 ea:"
BTW, none of these quantities (The 49,000 or 151,000) shows up in MMBE. We've tried posting the stock in QA32, but of course it doesn't exist. What are we missing?

Hi Xamaica,
If lot status is ' REL CALC SPRQ' that means this lot is not canceled, you should be able to post. If the lot status would have been LTCA then selection profile will help you in filtering canceled lots.
please give inputs on following:
We purchased 200,000 of an item and a GR was done.
Have you posted the stock of 2 lacks to unrestricted and then later inventory was done ?
This was done during inventory, the item was physically counted and someone made an error in the count. At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000.
Since system allowed you to do inventory that means stock of 2 lacks was available that time in unrestricted.
I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system.
If inventory is done and only 49000 stock is remaining, document can't be canceled, may be somebody must have again done inventory and removed that 49000 also.
Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
I still believe that the status can't be REL CALC SPRQ, one more thing, you said you purchases 200,000 then how you get two lots of 151000 and 49000? what insp type is activated please confirm?
If stocks are not available then you should Block the lot as nothing is required from this lot.
If status is 'REL CALC SPRQ' then go to MIGO and cancel that document strait away.
Pl check and revert.
Best Regards,
Shekhar

Deficit of SL Stck.in qual.insp

I made a mistake by the settlement movement for the liberation of MB1B article qiualité control status to the status of control quallité (code motion 321)
When I tried to cancel this item OCUMENT map MIGO the system 'Esag displays the error below:
Deficit of SL Stck.in qual.insp 32 176 L: 110 001 2010 M311 100528SS06
No message. M7021
Do you have an idea why the stock quality control blocks us when we want to transfer to the status of quality control
Tahinks in advance

Hi , me explain
There was a system error because he did not block the nanny transfertde lot twice the 321 code movement that caused a stock plus the stock and a free utilisaton negative inventory in the shop quality control.
As we assay to cancel the second movement by moving the code 322 to justify the stock, the system blocks the transaction and displays this message
Deficit of SL Stck.in qual.insp 32 176 L: 110 001 2010 M311 100528SS06
No message. M7021
Now is there a way to adjust the two stock status
Thainks in advance

Deficit of Customer stock unr. 0.001 CV : MM12345 1000 batch W

Hi Gurus,
Created batch upload of consignment sales with auto dr.
Upon doing pgi; Deficit of Customer stock unr. 1.001 CV : MM12345 1000 batch W.
My question is. How come this is happening when i have availability check active iand it allocated stocks for these deliveries?
Thanks in advance!
-Joker

Unless your database is strictly a DSS-type of database, your AWR report exposes loads of issues with it. And I think none of the time during the AWR window was spent on database. Look at the DB time (with all those multi cores) compared with the elapsed time of the AWR.
As you are on 11g, why not make use of MEMORY_TARGET (a single parameter to manage both SGA and PGA)? If you are already on it, ignore this as I can't see it anywhere. If not, get rid of SGA_TARGET and PGA_AGGREGATE_TARGET and replace it with a single MEMORY_TARGET parameter. However you may have a minimum threshold set for different SGA pools so that they won't shrink beyond that point.
Having said that, setting MEMORY_TARGET is not a guarantee to avoid ORA-4030. Just a single bad PL/SQL code could go and exploit the untunable part of your process memory and even go and blow up the physical memory. If you are using FORALL and BULK load, see if you can cut it down into few chunks rather than running as a single process.
What does your V$PGASTAT say?

Deficit of unrestricted stock while trying to do 313 inspite of having stck

Dear Guruz,
This is a weird situation where i am having 1000 quantities of material x in str loc. Note: none is in blocked /quality inspection. 1000 quantities in unrestricted use. Now when i am trying to do remove(650 quantities) from storage using 313 it is showing deficit of unrestricted stock. I am unable to find NY LOGIC WHY IS THIS HAPPENING or how can it be solved.
Pl discuss
Regards,
bose.

Hi
where you check stocked in MMBE ?
check your stock in MB5B give date for which you want issue and see the qty there on that date
or check in MD04 also
Regards
Kailas Ugale

Deficit of BA Unrestr. prev. 2.490 MT : CRC-F06-2B-T2-W 1100 M01 69274710 M

Dear Experts,
We receive the material through MIGO for Depot through z movement y56.after receiving the material,user allocate it to Sales order with 412E movement type he again canceled the with 411E movement type.but user mistakenly create two MIGO s.now he want to cancel one materail document created by MIGO with y56 z movement type.but its giving error message deficit unrestricted stock.but for that material batch is existed MMBE,please give me suggestion.
Reards,

hi,
Let me know when this Doc was made and when ie. aft how many day you are trying to cancel it...
If it is of last month and you are trying to cancel it in this month, then its not possible untill you use the previous posting allowed indicator in MMRV transaction...
Let me know your details....
Regards
Priyanka.P

Deficit of EKLA-LWSBB

Similar Messages

Maybe you are looking for