Deficit of PL Stock in transfer 10 EA : 100100051 IBM2
hi,
Deficit of PL Stock in transfer 10 EA : 100100051 IBM2
Message no. M7021
please tell me about this?
Regards,
Swathi
Hi Swathi,
Please let me know what all the values you are entering in MB1C trxn code.
Generally it wont show the error. Please chek the plant & storage location.
Revert back in case not solved.
Reg,
Ashok
Rewards welcome.
Similar Messages
-
Is Retail: Store to Store transfer: Deficit of PL Stock in transfer
All,
We are trying to transfer inventory from Store A to Store B.
Both stores have -ve inventory turned on at storage location level. We are trying to transfer using 303 movement type.
While executing the transfer we are getting a "Deficit of PL Stock in transfer XX EA" error.
Checked the article master for the article and neg stocks is turned on for that article in store A and store B.
What could be the reason for this error?
Would appreciate any inputHi,
Can you please provide more details
Store A - Stock Quantity..?
Store B - Stock Quantity..?
Transaction where you are trying this scenario
Regards,
Satish -
Capturing Stock in transfer qty and open PR qty
hi
I am developing a report where I want to capture the following data:
1) Stock in transfer CC quantity (Inter company transfer)
2) Open PR quantity
Can you plz suggest from where(Table name) I can capture this data?
Answer will be awared with full points........
Regards
SOpen Qty PR, You can check Comparing Tables EBAN & EKBE through Pur Req Number
Thx
Raju -
Deficit of BA stock in Quality Inspection
Hi All,
I have a situation that's a bit complicated. I hope I don't confuse anyone. I'm trying to do a UD for an item, but I'm getting a Deficit of BA stock in quality inspection.
We purchased 200,000 of an item and a GR was done. This was done during inventory, the item was physically counted and someone made an error in the count. At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000. I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system.
Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
When we attempt to do a usage decision we get the following error message:
"49,000 EA incorrect posting to block stock, error msg:
Deficit of BA stock in qual. insp 49,000 ea:"
BTW, none of these quantities (The 49,000 or 151,000) shows up in MMBE. We've tried posting the stock in QA32, but of course it doesn't exist. What are we missing?Hi Xamaica,
If lot status is ' REL CALC SPRQ' that means this lot is not canceled, you should be able to post. If the lot status would have been LTCA then selection profile will help you in filtering canceled lots.
please give inputs on following:
We purchased 200,000 of an item and a GR was done.
Have you posted the stock of 2 lacks to unrestricted and then later inventory was done ?
This was done during inventory, the item was physically counted and someone made an error in the count. At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000.
Since system allowed you to do inventory that means stock of 2 lacks was available that time in unrestricted.
I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system.
If inventory is done and only 49000 stock is remaining, document can't be canceled, may be somebody must have again done inventory and removed that 49000 also.
Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
I still believe that the status can't be REL CALC SPRQ, one more thing, you said you purchases 200,000 then how you get two lots of 151000 and 49000? what insp type is activated please confirm?
If stocks are not available then you should Block the lot as nothing is required from this lot.
If status is 'REL CALC SPRQ' then go to MIGO and cancel that document strait away.
Pl check and revert.
Best Regards,
Shekhar -
Cross company stock transfer, in which table "stock in transfer CC"
Dear Gurus,
When I do cross company stock transfer, in which table quantity for "stock in transfer CC" will get updated?
Rgds
SarHi there
Just with th report transaction MB5T
I think your purpose will be solved using that report
just check the flag cross company code in the initial screen
*the qty gets updated in the table MSEG feild MENGE.*
Reward if usefull
Sujoy
Edited by: SUJOY KUMAR PAL on Feb 15, 2008 6:07 AM -
Can i transfer stock with transfer order in Inventory management?
Can i transfer stock with transfer order in Inventory management between two storage locations in the same plant?
I hope you are referring a transfer order and the transfer between two storage locations connected to the same warehouse, and just not doing movement at IM level with a transfer order.
But, if you are referring to making a bin-bin transfer within the warehosue and you want to influence the storage location to storage location automatically, yes, you can do this. You should use 'storage location control' configuration under WM-IM interface to drive this. Essentially, you need to maintain the warehouse, destiantion storage type, plant, destination storage location and movement type 311. When you perform the transfer order confirmation to move inventory from a storage type (inventory is under source storage location) to the destination storage type (per the configuration setting) there will be an automatic transfer posting made to move inventory at IM level from source to desintation storage location. -
Deficit of Customer stock unr. 0.001 CV : MM12345 1000 batch W
Hi Gurus,
Created batch upload of consignment sales with auto dr.
Upon doing pgi; Deficit of Customer stock unr. 1.001 CV : MM12345 1000 batch W.
My question is. How come this is happening when i have availability check active iand it allocated stocks for these deliveries?
Thanks in advance!
-JokerUnless your database is strictly a DSS-type of database, your AWR report exposes loads of issues with it. And I think none of the time during the AWR window was spent on database. Look at the DB time (with all those multi cores) compared with the elapsed time of the AWR.
As you are on 11g, why not make use of MEMORY_TARGET (a single parameter to manage both SGA and PGA)? If you are already on it, ignore this as I can't see it anywhere. If not, get rid of SGA_TARGET and PGA_AGGREGATE_TARGET and replace it with a single MEMORY_TARGET parameter. However you may have a minimum threshold set for different SGA pools so that they won't shrink beyond that point.
Having said that, setting MEMORY_TARGET is not a guarantee to avoid ORA-4030. Just a single bad PL/SQL code could go and exploit the untunable part of your process memory and even go and blow up the physical memory. If you are using FORALL and BULK load, see if you can cut it down into few chunks rather than running as a single process.
What does your V$PGASTAT say? -
Deficit of unrestricted stock while trying to do 313 inspite of having stck
Dear Guruz,
This is a weird situation where i am having 1000 quantities of material x in str loc. Note: none is in blocked /quality inspection. 1000 quantities in unrestricted use. Now when i am trying to do remove(650 quantities) from storage using 313 it is showing deficit of unrestricted stock. I am unable to find NY LOGIC WHY IS THIS HAPPENING or how can it be solved.
Pl discuss
Regards,
bose.Hi
where you check stocked in MMBE ?
check your stock in MB5B give date for which you want issue and see the qty there on that date
or check in MD04 also
Regards
Kailas Ugale -
Error: Deficit of SL stock.in.qual.insp
Hi Experts,
GR posting for inbound delivery posted successfully in EWM and ECC with status COMPLETED. If i see the stock comparison in ERP system:
There is difference qty appearing in ERP side as quality inspection stock . i.e. for example there is an item in delivery with delivery qty: 12 EA, it is
updating WM qty as 12 EA. but ERP stock showing as 11 EA with Deficit of SL stock.in.qual.insp 1 EA.
Some times behaving like, if there is qty 40 EA of item, but it showing as 60 EA - Deficit of SL stock.in.qual.insp for that item in SMQ2 ERP side.
Below screen shot for Stock comparison in ERP:Hi Jurgen,
Thank you very much for your reply and time.
Here is the report from last 6 months and message, what is showing at SMQ2 ERP side.
Delivery - 973414923 with line item qty is: 2EA. which is deficit of stock error now in ECC SMQ2.
When i see in EWM for Document generated with ERP delivery - all the items with all the activities in "Completed" status, but in header of the EWM document shows Warehouse activity and
Putaway staus are "Partially COmpleted".
ECC side - delivery status is COMPLETED.
Material: 1S3889 Plant 0001 Sloc 0001
M -
TCODE List document STOCK IN TRANSFER
Hi All,
Somebody kown TCODE like MB5T to see documents related STOCK IN TRANSFER???
We have outbound deliveries (Delivery Type UL - Del.for Stock Trans. u2013 Movement Type 603 - TF rem.fm stor.to pl) waiting for Goods Receipt that we canu2019t determinated.
Please let me know
Regards,
NACUThank Shiva, but we don't have purchase order, que have outbound delivery, it's trhe first document.
First, we have a outdelivery with movement type 603 which put material at stock transfer then we use MIGO (A01 / R05) to transfer into unrestricted-use stock the material posted into stock in transfer in the receiving plant using movement type 603.
We need know this outboud delivery number, VL06 didn'y have tihis information.
Regards, -
Table for "Stock in transfer CC"
Hi
I am using cross company stock transfer scenarion. We can see the stock in transfer with the transaction MB5T or we can use the transaction MMBE to see the "Stock in transfer CC".
In which database table this value for "Stock in transfer CC" is stored?
Full points will be rewarded.......
Regards
SEKBE - purchase order history.
You should find there various records e.g. for the delivery, goods issue and goods receipt.
The value is not just stored in one table field, it gets calculated dynamically -
MB1B transfer posting error "SL stock in transfer exceeded by 20 PC."
Hi All,
I'm doing a MB1B transfer posting for my materials from 1 storage location to another using movement type 311,
but some of the materials I encountered this error.
"SL stock in transfer exceeded by 20 PC : 'Material name' 'Plant' 'Stor. Loc' "
I went to MB5T to check the materials if it's in the stock in transfer, but they are not in the list.
I've also check in MMBE to check the stock value of these materials, it shows 100 in unrestricted use which is more than what I'm transferring.
May I know what have i missed checking?
Please help and thank you.Hi There
Seems you are trying to do the One step Transfer between locations (311), So it is not required to look into the 313, 315 steps (Stock in trasfer, Removal and palce in transfer)
From the Suppling location these Material and Batch is reserved for some purpose(261 or 201) and these material may under Dynamic Availability Check, In this case even if you have the stock in Location if it is hard allocated for some other purpose you cant use this qty
Please check the above settings.
Thanks
Senthil P -
Stock in Transfer(sloc)
Hi
I have material stock of which shows in stock in Transfer(sloc) and not in unrestricted stock.
When I see movements against this it has movement 311 against 1 material document.
I want to know why this material is not in unrestricted stock and why it is available in stock in Transfer(sloc).
Movement 311 is for stock transfer between storage locations as it is one step transfer it should have stock in receving location at unrestricted stock and not at stock in Transfer(sloc).P1062715 wrote:
Hi
>
> I have material stock of which shows in stock in Transfer(sloc) and not in unrestricted stock.
>
> When I see movements against this it has movement 311 against 1 material document.
>
> I want to know why this material is not in unrestricted stock and why it is available in stock in Transfer(sloc).
>
> Movement 311 is for stock transfer between storage locations as it is one step transfer it should have stock in receving location at unrestricted stock and not at stock in Transfer(sloc).
hi,
stock transfer with 311 was one step processes so please check your processes once agian
Now do with 315 movement type and you have to take the sttocks in to s.location
Thanking you. -
ATP check for 'stock in transfer'
I have a scenario which I created a Sales Order for 100 EA of product 'X' shipping from DC01 to a customer. DC01 does not currently have inventory for product 'X'. SAP has inventory only available in DC02.
I created a (two step) STO and an outbound delivery shipping inventory from DC02 to DC01. I issued the 100 EA of product 'X' against the outbound delivery. Transaction MB5T shows the 100 EA 'in transit'.
Under my availability check, on my sales order, the checking rule scope displays, a check on 'Include Stock in transfer'.
Why am I unable to view my stock in transit of '100' EA from the STO process when I look at the ATP check ? How can ATP view the 'Stock in transfer' from the two step STO?
Thank you,
GustavoHi,
Check the settings in t.code OVZ9.
Check the box include purchase orders and select A or X in the field Incl. rel. order reqs field.
After making these settings, just test and update the results.
Do you have batches in the STO? If so are they in restricted status during "in-transit"?
Regards -
PL Stock in transfer exceeded by NOS
Dear Expert,
Our one user wrongly done the 305 ( Place in stoage) entry twice. but when i'm trying to rectify (Reverse entry ) it is swoing me following error.
PL Stock in transfer exceeded by 36 NOS ,
Message no. M7022
But when i have checked system message showing "warning" the MM -> Inventory Management and Physical Inventory - >Define Attributes of System Messages.
Is it right path or may different.
Please help me about this problem.
Regards,
PK.Some system messages are program specific messages which can't be changed in SPRO settings.
Check this SAP help
http://help.sap.com/saphelp_46c/helpdata/fr/e3/6cec6eb435d1118b3f0060b03ca329/content.htm
which says..
Caution
Messages M7 021 and M7 022 can only be used for the following cases:
Goods movement with reference to a reservation:
If more than the reserved quantity is withdrawn, you can have either a warning message or an error message issued.
Negative stock allowed:
If the stock balance becomes negative due to a withdrawal of goods, the system can issue a warning or an error message. If no negative stock is allowed, the system always issues an error message.
Morever you get this message as error when you try to place the stock in sloc for the second time with reference to the material document(remove stock from sloc).. system wont allow to place the stock twice with reference.. please check whether you placed the stock with reference or you transfered the stock through 301.. in any case, if you have more stock in a sloc.. why dont you try 301 to rectify it as a work around.
Maybe you are looking for
-
Not sure how much clearer I can be. Windows XP version 5.1 with Service Pack 3 Firefox Version 22 Can not view Firefox Health Report even thou all selections are made for this to happen I share data with Mozilla
-
Why Chapter Markers doesn't jump anymore after updates ?
Hi all experts out there, I am faced with a weird problem ... I use iDvd to create some DVD, the menus & chapters all works fine & perfect. The chapter markers jumped correctly to correct chapters. Then I wanna make some simple amendment to the movie
-
Profit center dimension updation. (urgent)
Hi Friends, When i post the document in Fi its updated in FI and consolidation report ZD ( Company Dimension) but its not updated in ZP (Profit center Dimension). Please help me for this how it will update is their any process for Profit center Dim
-
Can i use a GCC compiler on MacOSX and link this C Code to lbv 6.1 on OS9?
I am interested in compiling my C code on the free GCC compiler which works with Mac OS X but am concerned that I will not be able to connect this with the Call library function and CINs in labview 6.1 that runs on Mac OS 9. Am I able to cross platfo
-
New Computer with Iphone - Help
Hi, i searched and found most of my answers but the one thing im not sure about is this. I just got a new PC becuase my old one was shot. I lost all my data i know that if i syc my iphone to the new pc i could merge my contacts but the one and most i