Deficit of SL Unrestricted-use 1 EA : (Notification E M7 021).

Hi Experts,
I am facing problem with the error " Deficit of SL Unrestricted-use 1 EA : (Notification E M7 021) " in CRM service contract.
My issue is when we are confirming the service contract it will create a goods moment automatically in SAP ECC and it will provide information back to CRM.Now the issue is if quantity is not available then it throwing this error " Deficit of SL Unrestricted-use 1 EA : (Notification E M7 021)" and some times even we have some stcok also we are getting this error.　Because of this error message we are unable to close the service contract in CRM .
So can you please let me know what may be root the cause to cause this issue.
Thanks in advance..
Krishna

Your error is showing diff plant and storage location then you have expalined inthe query
so make sure that you havae enourgh stock in the same plant and SL.
and if your material batch managed then it should have enough stock for that batch.

Similar Messages

Deficit of VC Unrestricted-use 100 EA : in combination of material plant sloc K Message no. M7021

Hi SAP Gurus,
I was doing Goods Issue to a cost center from the Vendor Consignment stock having maintained MRP Views in Material Master created Purchase Order through T-Code MD04. I did goods receipt w.r.t Purchase Order and in MMBE Vendor Consignment stock is 100. Still i got this error shown below.
This is Error: Deficit of VC Unrestricted-use 100 EA : PC-PROBE SKS1 SK01 0000000420 K
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 100 EA.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
Note:
The abbreviations in the short text of this message can have the following values:
BA = batch
OR = order
PL = plant
PR = previous period
PU = purchasing document
RE = reservation
SL = storage location
VC = consignment stock from vendor in storage location
Can you Please help me out of this issue.
Thanks in advance
Murali

This message is a multi-purpose message, probably meant for good it is unfortunately confusing to many users.
This message is only customizable (warning/error) in case it is triggered from an availability check. e.g. if you have reserved 20 from your stock of 100 and you try to issue the 100. Then system is telling you that you have not enough stock but in case of a warning you can continue, for the system it is okay for your reservation probably not, but your decision to go over the warning overrules SAP.
But if you have 100 and want issue 200, and do not have negative stock, then this message comes as error and all your customizing (set to warning) is not taken into account.
As you are just posted it can as warning message, I have to assume it was because of a dynamic availability check . You should analyze your availability in CO09 transaction

Deficit of BA Unrestricted-use 1 MC : BIX10001 1BIS 0004 0000034074 Message

Dear Friends ,
in MMBE report stock is available with me. but when i do plant to plant transfer with mov. type 301.
system gives me error - Deficit of BA Unrestricted-use 1 MC : BIX10001 1BIS 0004 0000034074
Message no. M7021
why actauly quantity is available with me in mmbe report.

Hi Sandesh,
stock of that material is available in "unrestricted use" only .
and infront of it it is written that- Sales order stock
Regards,
Mahesh

Deficit of BA Unrestricted-use 525 M : BA0000001 JIC1 BPSL BA0000001

Hi,
Deficit of BA Unrestricted-use 525 M : BA0000001 JIC1 BPSL BA0000001
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 525 M.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
Note:
The abbreviations in the short text of this message can have the following values:
BA = batch
OR = order
PL = plant
PR = previous period
PU = purchasing document
RE = reservation
SL = storage location
VC = consignment stock from vendor in storage location
While doing the PGI i am getting the Error , i checked in MMBE and MB51 & MB52 also STOCK is available and also stock already assigned to SO
please guide me how to solve
Regards,
Prasanna

Hi,
Again i am Getting one more issue like
Order cannot be delivered (see long text)
Message no. VL461
Diagnosis
Possible reasons include:
The copy conditions specified in Specify copy control for deliveries do not allow the order to be delivered.
The order is blocked for delivery.
The order document is incomplete.
Procedure
Pay attention to any notes that may be recorded in the log.
You can display the copying requirements defined for this transaction in Customizing.
59 10 Only 0 M of material BA00000006 available
59 10 An item with no delivery quantity is not permitted. Item will be deleted.
here 59 is the my Sale order number and 10 is line item number and BA00000006 is the material
here one important point is what we have done is ( I don't know whether is correct way or not )
Under this material BA00000006 (Finished material ) we assigned different Finished materials with different quantity and different Batch numbers and also final one BA00000006 is having one more batch and at the time of delivery i am getting the error what i mentioned above
Please guide me how to solve the issue
if any one want further clarification please revert me
Regards,
Prasanna

Re : Deficit of SL Unrestricted-use 10 KG : PACK-04 FRND FRND

Hi
While using MB1A movement type 261 the following error is coming.
"Deficit of SL Unrestricted-use 10 KG : PACK-04 FRND FRND"
How to solve this.
Thanks
Mani

Hi,
It means that material unrestricted use stock is not available in that plant and storage location. may be stock availbe in Block stock, like quality inpection block stock, etc.. check stock through Tcode MMBE.
if it is available in block stock then transfer this block stock to unrestricted use stock.
Note:- movement type 561 is use for initial stock upload, once you are working in production system, it is suggested that naver use this movement type. it has major accounting impact.
Regards,
Naresh.

Error :Deficit of BA Unrestricted-use

Hi
We have a batch job to perform the automatic usage decision of the Inspection lots.
This batch job after changing the status of inspection lot moves the stock mentioned in the inspection lot to unrestricted-use .
for one of the inspection when it is trying to do that movement we are facing this error
"Deficit of BA Unrestricted-use 3,204.00 EA : 550-500712 US35 MC01 42122419T"
What is the reason for this error
can you please help me ?
Thanks and Regards
Ramakanth Akunury

Hi Nikhilesh
thanx for ur response .
In the table for the particular batch the Quantity is present in the "In Quality Inspection" . We are trying to move it into "Unrestricted-use "
Thanks and Regards
Ramakanth Akunury

Error :Deficit of BA Unrestricted-use 1 EA : S07_SUB_ROT20 0001 0002 000000

Hi All ,
In Component Maintaince scenario planned modification (external operation first and internal second) . when i come to internal part and carry out transaction mb11 with order number "XXXX" there i get the error "Deficit of BA Unrestricted-use 1 EA : S07_SUB_ROT20 0001 0002 000000" i have checked the unrestricted stock its available .I am not sure why i get this error.
Kindly help.
Thanks
neelam

You should see the batch number field directly in the item overview of MB11.
lets put the message apart:
S07_SUB_ROT20 0001 0002 000000
S07_SUB_ROT20 is your material number
0001 is your plant
0002 is the storage location
000000 the batch number
this bach number 000000 does not have unrestricted use stock in location 0002 of plant 0001

Deficit of SL Unrestricted-use 5 PC

I m facing this prob whenever m issuing material to plant

hai;
this error coming due to the non-availability of stock in the particular storage location.
since you are issuing against a production order ,it takes the quantity requirement from BOM.So in order to complete the Order you want to issue the same quantity what system suggests.But it is also possible issuing partially agaist order.if stock is available you may issue against the particular order later .Otherwise close the order by partial issuing.
ok

CO11N Errors:Depend. goods mvemnt. was incorrect & Deficit of SL Unres.-use

Dear Colleagues,
When trying to confirm a particular order on CO11N,users came across these error 2 messages:
A) Depend. goods mvemnt. was incorrect
B) Deficit of SL Unrestricted-use 2 PCS : (Matnr No) (Cost centre)
Message no. M7021
I think they have changed recently the routing of this material...
On CA02 the last step's Control Key isn't greyed out as the others are (it is called "TEST" ).I compared CO02 with CA02 and the steps of the routing are exactly the same between the two;the only difference is the last step of the routing in the production order isn't CNF REL but only REL. I tried to confirm it individually on CO02 but it wouldn't allow it.
Can you please point me to the right direction on where to strat looking at?Is it within the routing something hasn't been maintained? Or within Material Master?Is it the work centre of the last operaton not been maintained anywhere?
All help is appreciated.
PAPJ

Thanks Vivek,
The problem ended up to be the wrong cost centre the production order.
Apparently it has been a recurring issue for this part (i.e. the wrong cost centre contained in the production order that has to be manually altered on CO02 for the confimation on CO11n to go through...
I have two questions:
Where do the production orders take the cost centre info from?
Secondly,another production order contained the wrong info (wrong control key...) .Again,where do production orders take the control key info from?
All help appreciated,
PAPJ1.

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

http://support.apple.com/kb/TS3281

Since update to iOS 7, every time I open an app a pop up message telling me to connect to iTunes to use push notifications comes up. EVERY TIME! How do I make it stop???

Since update to iOS 7, every time I open an app a pop up message telling me to connect to iTunes to use push notifications comes up. EVERY TIME! How do I make it stop???

Do you use iTunes with your iPad and if so, have you tried syncing your iPad with iTunes since you updated the iOS?

When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM),this message said (Connect to iTunes to use push Notification),How I can to stop these message?

When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM) , this message said (Connect to iTunes to use push Notification) , How I can to stop these messages that appear to me constantly?

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

Apps in iTunes disappear; 'Connect to iTunes to Use Push Notifications'

Right, I synced my iphone up a while back to add a song to my phone.
Since then, I've had several problems I have yet to resolve:
1) I keep getting 'Connect to iTunes to Use Push Notifications.'
I searched through the forums and have yet to find a solution, nothing seems to work. Tried changing sims, rebooting/resyncing, messing with the notifications, etc., etc., etc. Nothing has worked.
2) I keep getting a notification when I try to do anything from my Macbook to my iphone that says my phone is not synced to my library, would I like to sync to my library now' or something to that effect. It doesn't matter how many times I add it, it will not recognise it.
3) All the apps I had downloaded that are associated with my iPhone, my iTouch, and my iPad have deleted themselves. I plug in the iPhone, all it recognises is the apps it came with, nothing else.
The iPad and iTouch are not giving the pop up for the Push Notifications because I have not synced them in a while.
Phone is a 3gs, running 5.1.1. I would prefer not to upgrade to the 6.0 if possible, I have heard terrible things about the upgrade from friends and would really prefer not to upgrade until all the bugs are fixed. Also, I'm reading other posts online that say they're still having the problem after upgrading to 6.0, and I don't want extra frustrations with the upgrade as well as all this. iPhone is NOT jailbroken, has never been jailbroken.
Macbook Pro is running 10.6.8.
iTunes is running the newest version 10.7
Some of you must have had this problem, any help would be appreciated, that pop-up for Push Notifications is really driving me insane.
Help!
thanks

Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.

IOS7 - Message "Connect to iTunes to use Push Notifications"

Since upgrading to the iOS7 on my iPhone, I keep getting the message "Connect to iTunes to use Push Notifications" in certain applications, and I cannot cancel out of this message as it continually pops up. The only way I can exit the app is by shutting down the phone and restarting it.
I am also experiencing difficulties connnecting to iMesssage. In Settings, iMessage: there is a message that says "Waiting for activation" and when I "Use my Apple ID to sign in" I get the message "Could not sign in. Please check your network connection and try again" but my network connection is fine because I can access Safari.
PLEASE HELP. This is extrememly frustrating.

Hello sspellar,
The following article provides further information regarding this message and steps necessary to get sorted.
Unable to use YouTube or Push notifications
http://support.apple.com/kb/TS3305
Cheers,
Allen

Connect to iTunes to use push notifications

After several years of completely trouble free use of my ipad 3, things messed up today. It lost my network connection even though the wifi was working fine. My mail wasn't loading correctly when the network was connected so I rebooted the iPad. After the reboot all of my e-mail passwords were gone and my Facebook password was gone. I re-entered all of the passwords and things are working ok, but I'm getting strange messages. I get this Connect to iTunes to use push notifications message on almost every app that I open. Also half of my magazine subscriptions get an endless loop of this message and I have to shut down the iPad to get them to go away. All I can say is ***? Any advice? I image ill have to reset and start over. It's weird that this happened completely out of the blue. Never had any problems at all with the iPad.

I reset it and restored from an iCloud backup. Everything is back to normal

Deficit of SL Unrestricted-use 1 EA : (Notification E M7 021).

Similar Messages

Maybe you are looking for