Deficit of unrestricted stock while trying to do 313 inspite of having stck

Dear Guruz,
This is a weird situation where i am having 1000 quantities of material x in str loc. Note: none is in blocked /quality inspection. 1000 quantities in unrestricted use. Now when i am trying to do remove(650 quantities) from storage using 313 it is showing deficit of unrestricted stock. I am unable to find NY LOGIC WHY IS THIS HAPPENING or how can it be solved.
Pl discuss
Regards,
bose.

Hi
where you check stocked in MMBE ?
check your stock in MB5B give date for which you want issue and see the qty there on that date
or check in MD04 also
Regards
Kailas Ugale

Similar Messages

  • On order stock to be transferred to Unrestricted stock

    Some material was transferred from Plant X to Plant Y.
    Now this material is lying in On order stock instead of  Unrestricted stock
    Kindly suggest how this On order stock can be transferred to Unrestricted stock
    Thanks

    We tried to post GR against PO (i.e, STO number)
    also tried with outbound delivery document but cant do it.
    Actually there were 3 line items in the STO, delivery and PGI was done for all the 3 line items now GR was also taken for all the three line items.
    However when we checked the material document display, system posted 1st two line items with 101 mov type and the third line item was having mov type 605
    now this item is sitting in on-order stock., I want to bring this to Unrestricted Stock.
    Reversing and re-posting shall not be feasible.
    Kindly revert, its urgent

  • Customer Return Into Unrestricted Stock

    Hi,
    Our existing process is as follows:
    We have Material with Serial Number activated.
    a.     We sale to the Camera to our customer. Here the Status of the Serial Number becomes u201CECUSu201D.
    b.     Due to some reason, the Customer Return the Camera. We create a CS Swap Order  & do the PGR to take the Camera back to our Stock from Customer. Here the Status of the Serial Number becomes u201CECUSu201D and the Material lies as SPECIAL STOCK Indictor u201CE - Orders on Handu201D
    c.     When we want to use the Camera (SPECIAL STOCK Indictor u201CE - Orders on Handu201D), we first move the Material in Unrestricted Stock using Movement Type 312 u2013 E.
    Problem we are facing is every time we need to move the Material to Unrestricted Stock which is practically very difficult.
    Is there any possibility of where in we receive the Material directly in to our Unrestricted Stock while doing PGR, not with Stock as Special Indicator E?
    Please advice.
    Regards,

    Follow the suggestion given by Mr.Ramanathan in this link
    [Re: Return Scenario  |Re: Return Scenario]
    thanks
    G. Lakshmipathi

  • Deficit of BA stock in Quality Inspection

    Hi All,
    I have a situation that's a bit complicated.  I hope I don't confuse anyone.  I'm trying to do a UD for an item, but I'm getting a Deficit of BA stock in quality inspection. 
    We purchased 200,000 of an item and a GR was done.  This was done during inventory, the item was physically counted and someone made an error in the count.  At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000.  I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system. 
    Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
    As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
    When we attempt to do a usage decision we get the following error message:
    "49,000 EA incorrect posting to block stock, error msg:
    Deficit of BA stock in qual. insp 49,000 ea:"
    BTW, none of these quantities (The 49,000 or 151,000) shows up in MMBE.   We've tried posting the stock in QA32, but of course it doesn't exist.  What are we missing?

    Hi Xamaica,
    If lot status is ' REL CALC SPRQ' that means  this lot is not canceled, you should be able to post.  If  the lot status would have been  LTCA then selection profile will help you in filtering canceled lots.
    please  give inputs  on following:
    We purchased 200,000 of an item and a GR was done.
    Have you posted the stock of 2 lacks  to unrestricted and then later  inventory was done ?
    This was done during inventory, the item was physically counted and someone made an error in the count. At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000.
    Since system allowed you to do inventory  that means stock of  2 lacks was available that time in unrestricted.
    I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system.
    If inventory is done and only 49000 stock is remaining, document can't be canceled, may be somebody must  have again  done inventory  and removed that  49000 also.
    Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
    As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
    I still believe that the status can't be   REL CALC SPRQ, one more thing, you said  you purchases 200,000 then how you get  two  lots of  151000 and 49000?  what insp type  is activated please  confirm?
    If stocks  are not available then  you should Block the lot  as  nothing is required from this lot.
    If status is 'REL CALC SPRQ'  then go to MIGO and cancel that document strait away.
    Pl check and revert.
    Best Regards,
    Shekhar

  • Is Retail: Store to Store transfer: Deficit of PL Stock in transfer

    All,
    We are trying to transfer inventory from Store A to Store B.
    Both stores have -ve inventory turned on at storage location level. We are trying to transfer using 303 movement type.
    While executing the transfer we are getting a "Deficit of PL Stock in transfer XX EA" error.
    Checked the article master for the article and neg stocks is turned on for that article in store A and store B.
    What could be the reason for this error?
    Would appreciate any input

    Hi,
    Can you please provide more details
    Store A - Stock Quantity..?
    Store B - Stock Quantity..?
    Transaction where you are trying this scenario
    Regards,
    Satish

  • Error while trying to create a new company

    Hey All
    I found an error while trying to create a new company.
    the Error like - No matching Records Found - [ODBC -2028]
    This can generate only database but not any tables in that database.
    Please help me.
    Thanking you
    Hepil Doshi

    Hello,
    I would prefer local language instead of US english.....
    My tips.
    1. DID you tried to Not apply the UDO/UDF things?
    2. Do not log in to the database, start from
    3. Please post the error message itself....
    4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
    If i know well,
    When you create a new company, the SBO-COMMON database is used to deploy the new database....
    If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
    Regards,
    J.

  • Posting Zero Value to Unrestricted Stock

    Hi Gurus,
    I'm having some trouble posting zero value materials to unrestricted stock. Is there any restrictions on doing this? if so, are there any work arounds?
    I've tried marking an item in the PO as "free goods" but when I do the G/R, the items are not showing in stock.
    Also, I seem to be having some problems with the material type classification UNBW. 
    Any help would be greatly appreciated.
    Thanks

    Hi
    If you use UNBW material for free items PO, then it will ask for account assignment and once you do GR the stock will be posted to respective account.
    You can not see the stock in unrestricted stock.
    You can create the material of material type FERT with zero value and you can raise PO with free items checked.Once you receive the goods, Quantity will be updated in unrestricted stock and value will be zero.
    Regards
    Ramakrishna

  • Goods Receipt of a material in Quality aswell as Unrestricted stock

    Hi All,
    When receiving material against PO from different vendors ,stock from few vendors should go into Quality stock whereas receipts from other vendors should be received into Unrestricted stock.
    Please suggest how to achieve this.
    Regards

    Hi,
    Thanks for your replies but i had made the selections as per senthil's suggestions but still the Inspection lot is being created and the stock is posted into Quality.I am not sure which CTRL Key to select i have tried the underlined ones from below ..should i be selecting some other key and are there any more settings that need to be done.
    0000 No active functions
    0001 Vendor release (with Warning)
    0002 Vendor release, tech. delivery terms
    0003 Vend.release, tech.del.terms, QA agreem.
    0004 Vend.rel,TechDelT.,QA agreement,certif.
    0005 Vendor release, certificate
    0006 Delivery release, documentation required
    0007 Delivery release, invoice block
    0051 Vendor release, certificate,Inv Block
    0052 Vendor release, Inv Block
    0053 Inv Block
    0054 Vendor release, certificate, error mess
    0055 Vendor release, certif, inv block, error
    0056 Vendor release (with Error)
    0057 Certificate,Inv Block (with Warning)
    0058 PBB - VenRel/Cert + Sub Spec Mgmt
    0059 PBB - VenRel/Cert + Packing/SMI
    0060 certificate required
    8888 Vendor block inactive
    9999 All functions active with error message
    Regards

  • Odata JDBC Service: getting NullPointerException: while trying to invoke the method

    Hi,
    I am testing OData, for that I followed the steps given in this tutorial:
    http://scn.sap.com/community/developer-center/mobility-platform/blog/2014/06/10/creating-an-odata-service-based-on-sap-gateway-soap-jdbc-and-jpa-data-sources-ba
    It wasn't working as it should, so to understand it better, I created a new project with Stock table only.
    Manually entered all it's properties and then deploy it.
    Issue1: when I create a JDBC connection to connect with derby database, The driver field has maximum limit and whole driver string is not copied. Attached is the screen shot.
    Where as I need to enter: org.apache.derby.jdbc.ClientDriver.
    Issue 2: I can't test the connection from here, weather it's working fine or not ?
    Issue 3:
    When I deploy the project and test the result, I get the Stock Service, But when I try to run this, I get nullpointer exception.
    URL: http://localhost:8080/gateway/odata/sap/WSTest1;v=1
    Response:
    <?xml version="1.0" encoding="utf-8"?>
    <service xml:base="http://localhost:8080/gateway/odata/sap/WSTest1;v=1/" xmlns="http://www.w3.org/2007/app" xmlns:atom="http://www.w3.org/2005/Atom">
      <workspace>
       <atom:title>Default</atom:title>
       <collection href="StockSet">
       <atom:title>StockSet</atom:title>
       </collection>
      </workspace>
    </service>
    Now I need to run StockSet, so next url to access the stock list,
    to get stocks:
    http://localhost:8080/gateway/odata/sap/WSTest1;v=1/SAP/StockSet
    Now I get the following response:
        <?xml version="1.0" ?>
        <error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
        <code>
        </code>
        <message xml:lang="en">java.lang.NullPointerException: while trying to invoke the method java.lang.Object.hashCode() of a null object loaded from local variable 'k'</message>
        </error>
    I am not able to figure out, why I am getting this error and how to fix it.
    All I want is to create a ODAta on ESPM_STOCK sample table given in example.
    Looking forward to hear from you.
    Thanks.

    Waqas Sadiq
    Issue1: when I create a JDBC connection to connect with derby database, The driver field has maximum limit and whole driver string is not copied. Attached is the screen shot.
    Are you working on SMP3.0 (lower version than SP03)?
    If yes, then there is character restriction in SMP3.0 (SP00, SP01), maximum length for a database driver is 25 characters.
    e.g. if driver name is oracle.jdbc.driver.OracleDriver but when you enter this, then you will see onlyoracle.jdbc.driver.Oracle
    Until unless we pass the correct driver value things will not work. there is a workaround for this. You create a desitnation with restricted character length.
    You would be seeing a property file for each created destination underC:\SAP\MobilePlatform3\Server\config_master\service.destinations\destinations
    Go there and open the created "OracleDB" and edit the "DriverName" to the full string:oracle.jdbc.driver.OracleDriver
    Please go through this blog for more understanding:
    http://scn.sap.com/community/developer-center/mobility-platform/blog/2014/01/09/how-to-connect-an-oracle-db-with-integration-gateway-in-smp3
    Note: seems this problem has been resolved in SMP3 SP03
    Issue 2: I can't test the connection from here, weather it's working fine or not ?
    I didnt find a way to test a destination. So you have to be sure about what all values you are entering.
    Once you are done with Destination creation, map it to the respective deployed service under "services" tab.
    Issue 3: When I deploy the project and test the result, I get the Stock Service, But when I try to run this, I get nullpointer exception
    Make sure you have corrected "Database driver" name manually. And then check if you are facing same issue.
    Does this URL expect any input parameters?
    http://localhost:8080/gateway/odata/sap/WSTest1;v=1/SAP/StockSet
    Regards,
    JK

  • How to populate " UnRestricted Stock" key figure from 0IC_C03

    Hello All,
    There is requirement for us to show a field known as "unrestricted stock" from the info cube 0IC_C03. but there is no such key figure in that info cube. I searched all the forums and learnt that it must be calculated on fly while the report executes.
    can any body help to identify / populate the "Un Restricted Stock"  from the info cube 0IC_C03.
    Thanks for all your time

    Hello Mr.Nagaraju vadlamani,
    Thanks for your reply.
    Can you please let me know how to get the following objects you mentioned to calculate the "unrestricted stock"
    Projected Stock of today - ?
    Demands with demand date today - ?
    receipts with delivery date today  - ?
    Thanks,

  • Posting of QI stock into Unrestricted stock (URGENT)

    Hi All,
    At the moment, we are posting QI stock into Unrestricted stock using MB1B with Mvt type 321. But the problem is we have to enter each material & qty manually, i,e, if a PO has 10 lines, i have to manually enter each material in the PO & then the qty. Is there any other transaction or way in which i can do this transfer posting with reference to the PO, thereby the system automatically puts the lines in that PO & i can then delete the material or modify the qty if it has not passed QI check.
    I tried in MB1B with Mvt 321 by creating with reference to PO, the system prompts an error & says not possible.
    Hope my problem is clear, await inputs.
    Vivek

    Hi Aasif,
    As mentioned by you i have done the settings.
    1. If i enter the mvt. type 321 in MB1B & then click on create w/ ref to PO, i still get an error.
    2. But if i just enter the mvt 321 & enter inside MB1B, there i now see a field called Purchase order. But if i enter the purchase oder number here, the materials inside this PO are not automatically displayed, the screen just becomes grey.
    What i actually want is, when i enter the PO number, the materials should be displayed, which would resolve my issue.
    Await your inputs.
    Vivek

  • Return unrestricted stock to vendor

    Dear gurus,
    Our issue is as follows:
    GR is done for a line item in PO. Inspection lot is generated and this material goes to quality stock. The material is then moved to unrestricted stock. The status of the inspection lot is REL, CALC and SPCO. In stock overview the material is in unrestricted stock.
    Now we do not want to use this material. We have to return it to the vendor. Can anybody tell me how to return the material to the vendor in this case?
    Thank in advance,
    Ram

    Since your stock is already cleared from Quality inspection and now lying in Unrestricted
    Stock you can follow following procedure to return the vendor stock.
    Go to MIGO->Good Issue>Other->Movement type 122.
    Entered the material and stock details & vendor and post the document. It will reduce the stock from unrestricted stock. If you want finical effect of this to vendor account then in addition to this you need to created FI document in Tcode.F-43 which will raise the debit note to vendor.
    There is another away when the material is in quality stock, while doing Usage Decision in stock posting there is filed for vendor return Qty if you entered in this then this will post both inventory as well as vendor posting in FI.
    Regards,
    Ajay Nikte

  • In sales return how to get in unrestricted stock the commission number 653E

    Dear All ,
    We have return the sales order how ever the material is in Sales order stock
    How to get in unrestricted stock 411E i have tried GL account not maped
    Regards
    Ramesh

    Hi Ramesh,
    Your requirement is not clear
    you want to move the return sales order stock to unrestricted ?
    If not, please give some additional information
    thanks
    santosh

  • How to consider unrestricted stock for the run of MRP project?

    Hi every one!
    We are facing a problem using MRP on project stock.
    We would like that the MRP takes unrestricted stock into consideration while calculating quantities to order for project stock.
    For example, a project request 100 pieces of material X.
    We have already 25 pieces of material X in unrestricted stock and 0 in project stock. 
    When I run MRP (MD51), it creates a Purchase Requisition of 100 pieces on the WBS element I have defined and not 75 as expected!!!
    By searching in documents and forums, I have read I have to set the value "2 - Collective requirements only" into the field MRP4 > BOM explosion/dependent requirements > Individual/coll. of the Material Master.
    I have done it but it doesn't change anything.
    Thanks in advance for your support!!!
    Bogdan

    Hello guys!
    As told, here I come with news about my problem.
    Finally, the Strategy Group didn't solve our problem.
    We didn't solve our problem as planned but we have found another way to work.
    Instead of including the unrestricted stock in the MRP project, we use transaction CO46 to have an overview of the unrestricted stock of all the components of the project's BOM.
    Based on that overview, the user can make stock transfers of the available quantities from the unrestricted stock to the project stock.
    I hope it can help people having the same problem!
    Bogdan

  • To run MRP without considering unrestricted stock

    Hi,
    Is it possible to run MRP without considering unrestricted stock of the material?
    Best Regards,
    Sitaraman

    Dear All,
    Thanks a lot for your response to this thread.
    In fact i tried the option of providing value 1 to exclude the storage location stock from the MRP. But it did not fulfil my requirement.
    My requirement is as below:
    The business wants to create the material requirement by manual reservations.
    Also for this MRP run except this manual reservations all other issue elements, receipt elements and stocks should not get considered.
    With checking group configuration i am able to exclude all other issue, receipt and stock elements. But in this settings there is no option to exclude the unrestricted stock.
    What happened when i tried giving 1 in MRP 4 view to exclude the storage location stock, the system not only excludes the stock but also it excludes the storage location from MRP run. Meaning...
    Plant   XXXX
    SLOC YYYY
    SLOC - YYYY current stock: 100
    Manual reservation created (requirement) for SLOC -YYYY : 50
    The expectation out of MRP run is, to create procurement proposals for 50 numbers with out considering SLOC - YYYY stock of 100 and not to exclude the SLOC YYYY itself.
    Best Regards,
    Sitaraman

Maybe you are looking for