Define a reminder for every entry in a calender

Hi!
I have just downloaded a calender from a website (my university courses). All those entries are "single" ones, so no repetition of events. Unfortunately, none of those events has a reminder defined.
Does anyone of you know how I can define an automatic reminder that will be used with every entry in the calender? Then I would not have to define it for every single entry.
That would be a big help! Thanks in advance...
Yours,
Matthias

Found a way to fix it.

Similar Messages

  • How do you make the date change for every entry when inserting.

    Hello, I am making a daily vehicle inspection report for my truck and I would like to make a 7 day calendar but I would like to insert the date ie Monday Feb 22, 2010, Tuesday Feb 23, 2010 etc...and have it change for each day of the week. is there a way to do this? Also can you put an outline or a box around the 6 lines of text that you input.
    Thank you
    Ottoman

    Jerrold Green1 wrote:
    Ottoman,
    As Peter says, you can use a Table for this. You do not, however, need to enter two dates to fill with a series of dates. Dates are an exception to the general Fill rule. Just enter one, and fill down to get successive dates.
    Other exception available:
    a single cell is sufficient for every entries ending with a number :
    president1
    thief2
    king3
    behave this way.
    Durations behave like numbers : two cells are required.
    Yvan KOENIG (VALLAURIS, France) samedi 27 février 2010 18:20:29

  • Loop the table entry and for every entry perform some action.

    Hello Experts,
    I have a requirement where there are let say n no. of entries in my ITAB and now for every entry i have to check certain field value and based on that i have to send respective mail.
    Now this has to run in background mode and the job will run on daily basis so the entries of table that are already processed should not be reprocessed.The scenario is every day the new entries will be added to ITAB and the newly added entries should be processed only.
    Please provide some sample code if possible.
    Thanks,
    Naveen

    Hi,
    I can not add a new field to the existing ztable. Crating a copy of ztable with addtional field status and setting it as processed against the record whenever i populate ITAB from ztable could be a solution but seems very lenthy method.
    There is one filed zdate  so write the code as below:-
    loop at itab where zdate = sy-datum
    email code------
    endloop.
    OR can i make use of
    loop at itab into wa
      ON change  of <filed1>
    email code-----
       ENDON
    endloop.
    Thanks,
    Naveen

  • How do I set a reminder for every 20 minutes?

    A Windows-to-Mac migrant wants to set a reminder on her MacBook Pro/Mavericks to appear every 20 minutes. In Windows, I used Task Scheduler to launch a text file "Stand up and stretch!" every 20 minutes. It would appear, and after stretching, I'd dismiss the reminder by closing the text file and continue working.
    The OS X Reminder app allows for a task to repeat daily, but not every 20 minutes, or even hourly. Also, I think those reminders would pop up on my iPhone, where I DON'T need or want them; I only want them to appear on my computer.
    Mavericks includes LaunchD, but from what I'm reading online, this is intended for launching System business (daemons, agents...) at startup, and appears to involve using Terminal to issue Unix commands, which is more "geeky" than I am comfortable with.
    In the App Store, there is a LaunchD Task Scheduler, which may be a more straightforward solution; I assume it uses a GUI to set up instructions for LaunchD.
    Should I try the "LaunchD Task Scheduler" app? Or is there another, simpler way to launch a text file or other type of reminder every 20 minutes?
    Thanks.

    Try this application: Coffee Break Pro X for Mac. Get it configured and then add the application to the System/Users & Groups/Login Items preference pane so it starts when you log in to the computer.

  • Defining the Fields for Manual Entries in Conditions Type

    Dear Team,
                      I want to define new fields in the Option Manual Entries in Condition Type eg PR00 . Can you tell me the Setting where do we define those settings and where are they control.
    Thanks,
    Prashant

    Hi
    The option provided for Manual Conditios are Hard Coded by the SAP, and you can not add any new option. If you want to check, pl. check the value range of Domain KMANU, where it is maintained.
    What is your requirement? May be you can fulfill your requirement by some other mean, like USER EXIT.
    Regards
    AA

  • How do i set a reminder for every 4 weeks on iphone4. 5.01.

    Hi
    Is there a way to do this ? Onyy have monthly !!
    An integrated app or something ???
    Find not having this feature VERY poor....
    Cheers

    its a WYSIWYG setup. only 2 week option on that list.
    Here is a site that gives you 30 different calendar alternatives
    http://iphone.appstorm.net/roundups/productivity-roundups/30-awesome-alternative -calendar-apps-for-iphone/

  • Is it possible to define one language for every imported text? And other problems when placing text.

    Problem is, that Indesign cc 2014 does not recognize language correctly. In my case it should always be slovenian (and documents like doc and docx are set to slovenian), but it set it as slovakian. I get many documents from different programs (Word, Libre Office, Open Office ...). And setting every one after placing it into document is time consuming. Word import was working great in InDesign 5.5. Now it just mixes local character formating. Also: importing docx takes too long, and when in document is some picture, it just freeze. So I must first open every doc/docx file and delete every picture/logo that is inside.
    Any suggestions?

    Check the language of your default Character Style. If it's set to Slovakian, change it to Slovenian with no documents open.

  • What happened to display of end times for iCal entries?

    I recall that iCal with Snow Leopard showed the start and end times for every entry. If, for example you had "school" on Monday at 10am to Noon, then you would have a block occupying that time slot and on the top edge, it would say "10 AM" and at the bottom edge, it would say "12 PM."
    That no longer seems to be the case; I only have the start time. This was a nice, handy feature, esp. when viewing many days, where the time scale isn't close by. suggestions? comments? thanks.

    Click the orange fire fox button, then select the History menu, the option to clear recent history is there.
    If you want, you can access the old style menus by pressing either Alt or F10.

  • MM - ML81N, Release Procedure for service entry sheet

    Hi Gurus, 
    I would like to active the realease strategy for service.
    in order to customize I  set:
    -Relase Groups
    -Release Codes
    -Release indicator
    -Release startegues 
    Then I run ML81N TRX and I called a sheet to try.  This sheet had to has done to one of the  release strategy set... 
    on the menu (of this trx ML81N)Entry Sheet->Set Status->Release (is still turn off)
    Where is the problem?, anybody could help me?
    Tks in advance,
    Nacho

    Hi,
    please read the FAQ note 672719, question 5:
    Setting up a release procedure is explained in the following short                         
    example: All service entry sheets with material group 007 are supposed                     
    to be subject to a release strategy. This release strategy requires that                   
    the service entry sheets must be released with release code A1. Only the                   
    cost center manager has the authorization for release code A1.                                                                               
    A) Create a characteristic for the material group:                                                                               
    o  Call Transaction CT04. (Path in the SAP menu in R/3 Enterprise:                     
           Cross-Application Components -> Classification System -> Master                     
           Data -> Characteristics)                                                                               
    o  Specify a name for the characteristic, for example CESSR_MATKL,                     
           and choose the 'Create' pushbutton.                                                                               
    o  On the 'Basic data' tab page, enter a description and keep the                      
           'Released' status.                                                                               
    o  On the 'Addnl data' tab page, enter table name CESSR and field                      
           name MATKL (Material group).                                                                               
    o  Enter class type 032 (Release strategy) on the 'Restrictions' tab                   
           page and then save the characteristic.                                                                               
    Note: The release strategy must be based on a field of structure CESSR.                    
    Using Transaction SE11, you can display which other fields are available                   
    in addition to the material group (field MATKL).                                           
    B) Create a class to which you assign the characteristic:                                                                               
    o  Call Transaction CL02. (Path in the SAP menu in R/3 Enterprise:                                 
           Cross-Application Components -> Classification System -> Master                                 
           Data -> Classes)                                                                               
    o  Enter a class name, for example FRG_ESSR, and class type 032 (for                               
           release strategy) and then choose the 'Create' pushbutton.                                                                               
    o  On the 'Basic data' tab page, enter any name. (Keep the                                         
           'Released' status.)                                                                               
    o  Enter characteristic CESSR_MATKL on the 'Char.' tab page and then                               
           save the class.                                                                               
    C) Now carry out the required Customizing settings. Follow IMG path                     
    (Transaction SPRO) 'Materials Management -> External Services Management                                                                               
    Seite 4                                                                               
    -> Define Release Procedures for Service Entry Sheet'                                                                               
    o  At first, you must create a release group (for example 03). For                  
           that, choose 'Release Groups', then choose 'New Entries', enter                  
           'Rel. Group' = 03 and 'Class' = FRG_ESSR. Save the entry. The                    
           system automatically determines value 3 (for entry of services                   
           performed) for the release object.                                                                               
    o  Now create release code A1 for release group 03. Choose 'New                     
           Entries' and specify the following values: Grp = 03, Code = A1,                  
           and description, for example cost center manager.                                                                               
    o  Create two release indicators, for example A and B. Select the                   
           'Released' field for release indicator B and save the entries.                   
           (Note: A release strategy must at least contain two release                      
           indicators. The first indicator (here A) must be defined as                      
           locked, the last indicator as released. Furthermore, the general                 
           changeability of the service entry sheet and the behavior for                    
           value changes are defined via the release indicators.)                                                                               
    o  Finally create the release strategy. Choose 'New Entries' and                    
           specify the following values: Release group = 03, release                        
           strategy, for example RS, release codes = A1. Assign the two                     
           release indicators A and B via 'Release statuses'. Assign                        
           material group 007 via 'Classification'. Save the release                        
           strategy.                                                                               
    D) Assign the authorization for release code A1 and release group 03 to                     
    the cost center manager. In role maintenance (Transaction PFCG), you can                    
    for example use the default values for Transaction ML85 for that.                           
    Regards,
    Edit

  • How do I set a reminder for the last day of every month

    Have I missed something? But how do you set a reminder for the last day of every month to recurr indefinatley in iOS6? Sorry if this is really simple but I just can't seem to work it out. Any help gratefully received.

    Hey Mattye88 not sure if you have seen but actully you can do this, but for some reason you have to use Siri.  If you bring up Siri and say "set a reminder ever 4 weeks from next wednesday to check the gas meter" it will set one and it will work just fine, I have reminders to water a Bonsai every three days and it works fine it just shows as custom repeat on the user interface.  Alas it seems you can not use Siri to set one for the end of the month though which is why I am in this threed.  Still hope it helps you to know how to sort this problem atleast.

  • Series not defined for journal entry

    Hello Sir
    I have defined two series namely "SCPL"  and "New1"
                    Start No    Last No
    SCPL        10001       3000
    New1         3001        30000  
    Now i have made "SCPL" series as default for A/R Invoices and "New1" series as default for rest of the documents like A/R Credit memo,Journal Entry  etc...  
    Now when I try to add an A/R Invoice , it gives me error message "Series not defined for journal entry"..??    But i have defined New1 series as default for Journal Entry

    Hi,
    In the series defined for journal entry,set document series as default for which default journal entries will be posted automatically.
    Ex.For delivey,return,invoice journal entry will be generated automatically,so if you a series like JESYS08 indicating system automated journal entry.This series should be set as default.
    If you have further issue let me know.

  • Mvt. 101 with ML81N for service entry sheet split for every service line

    Dear guru.
    I have one purchase order position for service (item category D)  with three different service line.
    I run ML81N and i create the service entry sheet for every service line.
    If I see the goods receipts movement generate , the system show 1 movement line with qty 1 and the total of amount in LC of the 3 service line.
    Does exist a chance in order that system create 3 different movement lines for every service line with quantity and amount specific.
    Thanks

    Hi,
    I think you have create Service PO with description & UOM .
    then that you have mention activity for services ( Service line) . But if you mention n number of service line  that all values acumulate to service line of line item.
    so, you can't get different entery in accounting document & material document. this always w r t line item of the service PO.
    You have to note one think  all the service line tiem is unter the line item 10 only.
    just check your PO in ME23N.
    SAM

  • No configuration is defined for the entry BIWGMLQuery error

    Error Summary
    Hi,
    When I use the WebDynpro compiler, it compiles and deploys without error.  However, when I attempt to run the model in WebDynpro, I get the attached error message.
    It is imperative that we be able to use the Flash compiler going forward, rather than WebDynpro.
    See attached error message.
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No configuration is defined for the entry BIWGMLQuery
        at com.sap.tc.wd4vc.xglengine.XGLEngine.createComponentInternal(XGLEngine.java:559)
        at com.sap.tc.wd4vc.xglengine.XGLEngine.getCompInstanceFromUsage(XGLEngine.java:362)
        at com.sap.tc.wd4vc.xglengine.XGLEngine.getCompInstance(XGLEngine.java:329)
        at com.sap.tc.wd4vc.xglengine.wdp.InternalXGLEngine.getCompInstance(InternalXGLEngine.java:167)
        at com.sap.tc.wd4vc.xglengine.XGLEngineInterface.getCompInstance(XGLEngineInterface.java:165)
        ... 52 more
    Thanks,
    Visshwas

    Here i have attached the error messages.
    [http://tinypic.com/view.php?pic=2z4l6xi&s=5]
    [http://tinypic.com/view.php?pic=fjjpc3&s=5]
    Please help.
    Regards,
    Visshwas

  • Two menu entries for every application in Gnome-Shell?!

    I have two menu entries for every application, which is kind of annoying, because the menu needs more time to load at startup!

    bugs, bugs , bugs!!!!
    I got rid of that preoblem by going back to fallback mode, booting one time and then going back
    to shell menu! Hope it works for you people as well!!
    edit: no seems only to work sometimes, the icons change arbitrarily each time you reboot!
    Last edited by gunjah292 (2011-05-06 07:08:16)

  • No configuration is defined for the entry BIRGMLQuery

    Hi:
    I´m working with VC EHP1 SP4. I have my VC Iview working ok with a BI_Query with Compile Runtime=flash but when I change the compiler runtime to Webdynpro the following error is display at runtime::
    com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No configuration is defined for the entry BIRGMLQuery
    I search all over SDN and marketplace but I can´t find where I have to do the configuration for the  BIRGMLQuery.
    Thanks a lot for your time.
    Rocío.

    Needed anymore

Maybe you are looking for