Define a version number for a chm file

I need to fix a version number in a chm file to determine
wich version a customer uses. At this moment I distinguish them by
chm's content, but I'm not happy for this choice.
Is this possible?
Thanks.
Raffaele.

Hi rdinatale
Another thing you can do is to simply edit the Window
properties to include the version number. Of course, this too would
need to be done each time you update the version. But once it was
done, it would show up in the title bar of the .CHM.
Just a thought... Rick

Similar Messages

  • I have a serial number for 2 on file.  Can I use this to activate version 5?

    I have a serial number for 2 on file.  Can I use this to activate version 5?

    No, Lightroom 2 serial numbers cannot be used in Lightroom 5.
    You can purchase Lightroom 5 at the upgrade price of 79 US Dollars, and you will get a valid LR 5 serial number (you will need the LR 2 serial number and the new LR 5 serial number to activate the upgrade).

  • Version number for GPO's not in sync with the version number for GPO's on the Baseline domain controller

    Hi
    I accidentally removed one of our domain controller's hyper-v image (DC-02) from the hyper-v manager and to bring it back online launched a new virtual machine using the same virtual hard drive. This brought back the domain controller machine and I set the
    original IP address to the same assuming that everything would just working fine.
    Sadly, that wasn't the case as when I tried to open the group policy manager on that machine I started getting "Access is denied" error. I was then presented with an option to open the group policy manager with the first available DC which I did
    and was able to open it with showing the same machine as the baseline domain controller under the status tab (DC-01 is actually the baseline DC). I then clicked Detect now and noticed it was showing 1 DC under replication in progress with problems in GPO version.
    I then did the same thing on the primary DC (DC-01) and even there it was showing this only (images attached).
    So I started exploring over the internet going through various articles but couldn't find a solution which I could apply without worrying about corrupting something somewhere. I also went to the SYSVOL folder on both the DC's to check the version number
    in GPT.ini files which are mentioned below:
    \\CC-DC01\sysvol\cloudchowk.lab\Policies\{6AC1786C-016F-11D2-945F-00C04fB984F9}
    [General]
    Version=3
    \\CC-DC01\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}
    [General]
    Version=5439513
    \\cc-dc02\SYSVOL\cloudchowk.lab\Policies\{6AC1786C-016F-11D2-945F-00C04fB984F9}
    [General]
    Version=3
    \\cc-dc02\SYSVOL\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}
    [General]
    Version=5308439
    Could anyone please help me sort this out? I am no system admin and whatever knowledge I have of setting up DC, AD etc is from following one article or the other over the internet.
    Regards
    Sajat Jain

    Hi
    Apologies for responding late. I followed through all the points mentioned by Frank and even did a non-authoritative restore synchronization but still no luck.
    I am attaching the output from the dcdiag /q and the from the event viewer after doing to non-authoritative restore synchronization.
    DCDIAG /Q
    There are warning or error events within the last 24 hours after the
    SYSVOL has been shared. Failing SYSVOL replication problems may cause
    Group Policy problems.
    ......................... CC-DC03 failed test DFSREvent
    Unable to connect to the NETLOGON share! (\\CC-DC03\netlogon)
    [CC-DC03] An net use or LsaPolicy operation failed with error 67,
    The network name cannot be found..
    ......................... CC-DC03 failed test NetLogons
    An error event occurred. EventID: 0x0000164A
    Time Generated: 01/18/2015 17:52:17
    Event String:
    The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
    An error event occurred. EventID: 0x0000164A
    Time Generated: 01/18/2015 17:54:12
    Event String:
    The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
    An error event occurred. EventID: 0x00000422
    Time Generated: 01/18/2015 17:54:41
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    An error event occurred. EventID: 0x00000422
    Time Generated: 01/18/2015 17:55:42
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    An error event occurred. EventID: 0x00000422
    Time Generated: 01/18/2015 17:59:41
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    An error event occurred. EventID: 0x00000422
    Time Generated: 01/18/2015 18:04:42
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    An error event occurred. EventID: 0x0000164A
    Time Generated: 01/18/2015 18:05:10
    Event String:
    The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
    An error event occurred. EventID: 0x00000422
    Time Generated: 01/18/2015 18:09:42
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    An error event occurred. EventID: 0x00000422
    Time Generated: 01/18/2015 18:14:42
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    An error event occurred. EventID: 0x00000422
    Time Generated: 01/18/2015 18:19:43
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    An error event occurred. EventID: 0x00000422
    Time Generated: 01/18/2015 18:24:43
    Event String:
    The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
    ......................... CC-DC03 failed test SystemLog
    EVENT VIEWER LOGS
    The DFS Replication service initialized SYSVOL at local path C:\Windows\SYSVOL\domain and is waiting to perform initial replication. The replicated folder will remain in the initial synchronization state until it has replicated with its partner CC-DC01.cloudchowk.lab. If the server was in the process of being promoted to a domain controller, the domain controller will not advertize and function as a domain controller until this issue is resolved. This can occur if the specified partner is also in the initial synchronization state, or if sharing violations are encountered on this server or the synchronization partner. If this event occurred during the migration of SYSVOL from File Replication service (FRS) to DFS Replication, changes will not replicate out until this issue is resolved. This can cause the SYSVOL folder on this server to become out of sync with other domain controllers.
    Additional Information:
    Replicated Folder Name: SYSVOL Share
    Replicated Folder ID: 4689406D-D6D8-49E0-8079-2B1D4AE61BC6
    Replication Group Name: Domain System Volume
    Replication Group ID: 6B162096-2EFA-4D4C-BF13-62CC5B112B97
    Member ID: 566943F9-D2FB-4304-823D-10DC972F831A
    Read-Only: 0
    Should I just start over again by removing DC03 and setting up another DC?
    Regards
    Sajat Jain

  • The same Object Version Number for the same person id multiple times

    Hello all,
    I am currently facing an issue with HRMS tables and the object version number for employees. I am trying to write a report but due to the same object version number for the same person appearing in several row i am getting duplicate information. For example,
    person id 91 object version number 32 is on 4 rows and i have no idea why...help please guys, I'm at a lost so far 50 people are facing the same issue.

    Hi Baal666bobo,
    The person table is date-tracked, so the PK has effective start and end dates as well.
    Get the correct record with sysdate(or any particular date) and then check the OVN.
    Cheers,
    Vignesh

  • Acrobat Version Type And Version Number, For Creative Suite 5 (5.0) / CS5 For Windows

    I would like to know the version type and pricise version number for Acrobat that is supplied with Creative Suite 5 (5.0) for Windows Retail Version.  (This is the default version number, before any updates) :
    To summarise:
    For the product:
    Platform: Windows
    Suite: Creative Suite 5 (CS5) / 5.0
    Distribution: Retail
    Application: Acrobat
    I require:
    Version Type: Standard / Pro / Extended
    Version Number (Precise): 9.0 / 9.3 / 9.3.2 / (or other)
    Disc's Volume Label: (As shown in Windows Explorer)
    Ideally this would be found by looking at Acrobat's HELP > ABOUT menu option. (From a Windows installtion of CS5, that has NOT been updated), and not just looking at what is printed on the disc label.
    More replies of the above information, will confirm any information provided in replies.

    Hello
    there are two ways i can suggest:
    First your own account: https://www.adobe.com/account.html and
    Second the general informations there: http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    Helpful woud be http://helpx.adobe.com/contact.html
    And what concerns Amazon: this "serial number" obtained from Amazon is not a serial number, only a code with which you can request a serial number from Adobe. Here you have to go through "Adobe Store", and look for the button "Serial Number Request". Fill in the form and, after a while you will get a "real" serial number.
    Hans-Günter

  • How to ceate Transport Request Number for importing transport files

    I'm trying to create Transport Request Number for importing transport files.
    I've copied the two transport files (K903281.QB8 and R903281.QB8) into subdirectories usr/sap/trans/cofiles and usr/sap/trans/data, respectively. Now, I want to import the transport files using transaction management system (STMS). Before using STMS, it seems like I need to create Transport Request Number, but I don't know how to create it. Could you please let me know how to create it?

    Sanjeev and Sajay,
    Thanks for your answer. I was able to import the files successfully as transport number QB8K903281 by using standard STMS transport function after manually adding new transport on STMS. My trouble was from my ingrorance of how to let STMS recognize transoprt number for transport files copied from outside SAP. Again thank you very much.
    Tetsuya

  • Need to update app version number for app upgrade

    Hello, I need help with updating of my app (magazine) on App Store. I used different platform for creating digital publications. Now I am starting with DPS. I want to update my app on DPS, but there is problem with version of app. Contemporary version is 3.0.1 and App Builder generates version 1.0.0. Is it possible change version manualy?

    You'll need to call product support and have them increase the version number for you. We have a few product support support people here as well, I'll change the title of your post to be a little more obvious and hopefully they'll see it.
    Neil

  • Map ID Processing for a CHM file

    This is just a question so I understand fully how this
    works...
    I have created a Map file for my project and assigned numeric
    map ID's to each topic that needs to be linked from my application
    to my CHM file. I have a topic with:
    Topic Title = "Historical HPI Data Viewer"
    File Name in source = "Historical_HPI_Viewer_Overview.htm"
    MapID = 60
    My developers use the map ID of 60 and are having a problem
    getting to the topic (all other maps work). Not sure what the
    problem is just yet (developer just emailed this morning that "it's
    not coming up"). I tested in the CSH tester in the Tools tab and it
    works fine.
    I just want to understand how the CHM file interprets the map
    ID sent to it and would like to know how the map ID works with the
    topic and the call from the application.
    Does RoboHelp put the map ID in the topic source somewhere?
    I cannot find any notation of the map id in the topic source.
    Is this put into the CHM file when compiled or does it
    interpret the Map ID to the Topic Title?
    What if the topic title is modified and no new Map file is
    generated, is this a problem?
    As always, any information would be appreciated.
    Thanks - Michael F Weart

    Hi Michael.
    There are two parts to context sensitive help. The first is
    the map file that assigns a mapid number to a topic. This uses a
    topic id that is linked to the file via the second element - the
    alias file. This file - look for the project's .ALI file - contains
    the topic id and the file name. Hope this helps.

  • SWF name and version number for bug reports

    Hi,
    When users report issues we ask for a screen dump , but we would like the course version number and the SWF name to appear in the screen footer.
    We have looked at a number of options, but we are a bit stuck. 
    SWF name
    1/ Pipwerks mentions a Cp variable called cpORGSWFPath 
    "Informational variable. Provides the file name for the project’s main SWF. Appears to duplicate functionality of cpOrgSWFPath.NOTE: This value can only be obtained when the project uses an external skin. " for CP5
    http://pipwerks.com/2010/08/23/complete-list-of-variables-for-adobe-captivate-5/
    Does anyone know how to access this ?
    2/ We could manually enter it in the cpInfoprojecttname field, but it wont change if we update the file
    Version Number
    1/ The Scorm manifest creates a version number. Can I get the information from Scorm ?
    2/ My backup plan is to use fields intended for other purposes
    e.g cpInfoprojecttname, cpInfoDescription
    the following are not used
    - cpInfoCourseId
    - cpInfoCourseName
    http://forums.adobe.com/message/3201125
    rgds Renovator

    That's a recent version of Logic 9 correct?
    The problem centers around a name length limitation in all versions of Logic except 9.1 and upwards (I think it's Logic 9.1)  You've named an audio file with more than 30 (or 31) characters in Logic 9, unfortunately Logic 8 can't read the long name and sees it as a shortened name and a disk sector location.
    #23B269  is the location of the file on the disk and if you would've created the project in 8 including the long name, Logic 8 would've written the file to disk as "heather reco#23B269.wav" and would've been able to find it.
    To be on the safe side, when creating files in Logic 9 for use in 8, keep the file names under 29 characters, including spaces. Re-linking has to be done by hand, load the audio files needed into the bin and drop then in the correct track locations, Logic 8 will not be able to find the files with long names.
    This used to play **** when moving projects, a home studio person finished his CD, unaware he/she uses long file names. Copies all projects and files to an external disk and takes it to a professional studio for mixing. OOPS!! The file names with the sector locations are no longer valid, the sector location has changed... the project loads with scraps of files from different projects or loads with incomplete files.

  • Lost Version Number for Tiger with recent update?

    I have a VERY odd problem after the most recent Tiger security update. The version number of the OS is MISSING -- it is not there. As a result, Safari, Photoshop, Illustrator and a ton of other applications will not launch, saying that they need at least 10.4 to run. When I go to the About This Mac dialog, there is literally just a blank space where the version number would be. Any way to fix this besides a reinstall?

    I don't know if this is the only file or the critical one, but /system/library/core services/SystemVersion.plist has an OS version number. I warn you though, messing with any system files is tricky and I would definitely back up before doing any editing. I also don't think this is the route to go. Very likely something more is missing as a result of an unsuccessful update and you may end up having to do an archive and install anyway. Have you tried repairing the drive with Disk Utility (the drive, not the permissions)?
    If you're determined to go the editing route I would just try replacing that one file with a copy from your backup (you do have one for just this kind of occurrence, don't you?).

  • "a new version number" for updates

    Hi,
    in iba2.0 there for updates there is a new field for: "new version number". default is 1.0.
    it the support it said the number must be higher than in the store.
    actually I don't see a version number at my book page in the store.
    however - since it is published yet the version number probably should be 1.1 or 2.0. I don't see any information how the numers have to be increased.
    furthermore I did not see any field to explain about "what's new".
    After uploading I got a waring: "ITMS-4172..."
    http://support.apple.com/kb/HT5213
    > but you will need to include text in the "What's New"
    Any experience with this issue yet?
    Thanks in advance,
    Thomas

    New info: Updating to iba 2.0 without updating to producer 2.8 is not to recommend:
    Book Versioning is available for books constructed in EPUB 3 or using iBooks Author version 2.0.
    If your book is in EPUB 3 format or was created using iBooks Author version 2.0, it is important to note you are required to fill out the "What's New in Version" section in the Info pane in iTunes Producer.  If you update your book and you do not fill out this section, your book will not continue through our review process and thus, will not go live on the iBookstore. 
    First please ensure you are using the latest version (2.8) of iTunes Producer. You can download this new version in iTunes Connect under the Deliver Your Content module. Once you have launched iTunes Producer version 2.8 and clicked on Look Up Metadata from the “Welcome to iTunes Producer” window,  you will see the "What’s New in Version" section in the Info pane.
    If your book is not in EPUB 3 format and was not created using iBooks Author version 2.0, you are not required to fill out the "What's New in Version" section in iTunes Producer.

  • Version number incorrect in .exe file properties

    Just reporting a little glitch in version 9.3.4, just installed here. When I run the program, "Help; About" says that it's version 9.3.4 as expected. But the version number reported in the properties of AcroRd32.exe is still 9.3.3.177

    snofriacus wrote:
    Just reporting a little glitch in version 9.3.4, just installed here. When I run the program, "Help; About" says that it's version 9.3.4 as expected. But the version number reported in the properties of AcroRd32.exe is still 9.3.3.177
    Agreed. Software compliance scanning systems (like Retina) are scanning to make sure that the exe file was updated from 9.3.3 to 9.3.4. Since the expected file was not updated, it beleives there's still an open vulnerability and flags the system as non-compliant (which in very strict IT/system environments can cause the users computer to be taken off-line until it is remediated).
    --KC

  • Version wise for the following files

    Hi All
    I need to know what versions for the following files,Can any one suggest me how to get the versions,and where do they belong to, whats there functionality.
    - POXWPA1B.pls
    - POXWPA4B.pls
    - POXWPA5B.pls
    - POXWPA6B.pls
    - POXWPA7B.pls
    - poxwfpoa.wft
    - poxwfrqa.wft
    Thanks,
    Praneeth
    Message was edited by:
    user590499

    Login as applmgr user and issue one of the following:
    $ cd $PO_TOP/patch/115/sql/
    $ strings -a <file name> | grep Header
    Or ..
    $ cd $PO_TOP/patch/115/sql/
    $ adident Header <file name>
    For more details, refer to Note: 125922.1 - How To Find Oracle Application File Versions
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=125922.1

  • Adding a Custom Version Number for a schema

    Hi,
    I'm currently looking at ways to set an arbitrary version number that would help me know where a particular is currently at. I already have a logging table to indicate which scripts have been run. But I want to "tag" my schema with a version.
    In MSSQL I've been using the extended properties. I was wondering if there was such a thing for a Schema. The Comments functions don't seem to be available at that particular level in the database. Should I have a separate table or there's something I can use that's already there but just can't find?
    Thanks,
    Greg

    New info: Updating to iba 2.0 without updating to producer 2.8 is not to recommend:
    Book Versioning is available for books constructed in EPUB 3 or using iBooks Author version 2.0.
    If your book is in EPUB 3 format or was created using iBooks Author version 2.0, it is important to note you are required to fill out the "What's New in Version" section in the Info pane in iTunes Producer.  If you update your book and you do not fill out this section, your book will not continue through our review process and thus, will not go live on the iBookstore. 
    First please ensure you are using the latest version (2.8) of iTunes Producer. You can download this new version in iTunes Connect under the Deliver Your Content module. Once you have launched iTunes Producer version 2.8 and clicked on Look Up Metadata from the “Welcome to iTunes Producer” window,  you will see the "What’s New in Version" section in the Info pane.
    If your book is not in EPUB 3 format and was not created using iBooks Author version 2.0, you are not required to fill out the "What's New in Version" section in iTunes Producer.

  • Need to set a higher version number for app store

    Hello,
    I have an update for an app that has been published with the single license. I now need to upload a DPS app with a higher version number than 1.1 for the Apple app store accept the upload.
    Problem: I can't find anywhere to set the app version number.
    (I am not talking about the adobe version number 27/26 but the one that is set in iTunes Connect)
    When I click "create app" and updates it in the manager it generates a new app with a higher number in this sequence: 1.0.0, 1.0.1, 1.0.2, 1.0.3
    But I need to set it manually. Where can I do this?
    Thanks,
    Mikkel

    I googled some more, it seems that it is the Short String Version number and only Adobe can change it...

Maybe you are looking for