Define Additional Fields for Line Item Display

Dear gurus,
I'd like to ask for your help again, please. I've just added the field BKPF-USNAM to the list of fields of FBL1N using IMG:" Financial Accounting-> Accounts Receivable and Accounts Payable->Vendor Accounts->Line Items-> Display Line Items->Define Additional Fields for Line Item Display". When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
Is there another transaction that I must set new columns to FBL1N.
Thank you very much.
Paresh Jivani
Edited by: Jivani Paresh on Jul 31, 2009 9:16 AM

Hii,
When you will execute FBL1N, it will come up in standard format. if you want to see any specific fields,then you have to go to Change Layout button and choose from available fields as per your requirement and then execute.
For future reference, you can save this layout as a Variant and then you can directly execute that report using that variant.
Dhara D.

Similar Messages

  • Additional fields for line item display for Vendor Accounts

    Hi,
    The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
    Could you help me to know how the same will be displayed in ECC 6.0 system.
    Thanks

    In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
    When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
    Thanks

  • Additional Field to line item display

    Hello Everyone
    I want to add two additional field ( date of entry and entry time) to GL Line item display.Can any body please share.
    Looking forward to hear from all of you.

    First try to determine if there are any user exits (screen exits actually) or BADI's which can do this.
    For finding the relevant user exits, determine the transaction code first and search on SDN for the report in which you enter the transaction code, and which will return all user exits for this transaction.
    For BAdI's there is also a program to be found on SDN.
    Next read the documentation of these user exits / BAdI's and you will be on your way.

  • In a sales order, entering the cost center field for line items

    In a sales order, the cost center field for the tab 'account assignment' of line items is suppressed. Is there any possibilities to open the cost center field(for line items)?

    Hi kim,
    You can do this in Account Assignment Catagory..
    Hope this helps.
    Regards,
    Sree

  • Changed the GL Master record for Line item display

    Hi,
    Can anybody please let me know once i changed the GL Master record as a line item display then how i can see my old line items display?
    I know through one standard programe we can do so but i haven't recall it. Can anybody please help me out with this?
    I'll really appreciate your time and help.
    Thanks & Regards,
    Niki Shah

    Hi Eric,
    Thanks for the quick reply. I got it.
    Thanks once again and i assigned the points accordingly.
    Regards,
    Niki Shah

  • Documentary Batch Field for Line item when calling BAPI_GOODSMVT_CREATE

    hi all,
    Iam unable to locate the Documentary Batch Field for each line item while posting a Goods Issue using BAPI BAPI_GOODSMVT_CREATE.
    BAPI2017_GM_ITEM_CREATE structure has got no field to enter the DB number against each line item. Although its not a mandatory field while posting a goods issue when calling the BAPI, but there shud be a input field for the same. When doing a similar posting in SAP using MIGO transaction it's mandatory to enter a Documentary Batch number(SAP Field name DOCUBATCH_CHARG). Does anyone have come across this situation. Is there a field with different name in the  BAPI2017_GM_ITEM_CREATE structure ? Appreciate your thoughts !
    Regards,
    Gilmour

    Hi Vindy,
    bapi2017_gm_item_create-batch is the field for the Batch.
    However Iam looking for a field called DB No which is basically a Documentary batch ensure the traceability of a material, without it being necessary for the stock of the material to be managed in batches. If you look at the Item section in MIGO you would have Batch and DB No for each line item and Iam looking for the DB no and not the primary Batch.
    Thanks,
    Gilmour

  • Adding a field to line item display in FBL3

    Hello,
    In trx "FBL3" I give asset G/l account, I would like to see "asset number", along with "Document No, Posting Keys, Posted date".I went to  "change Lay out" added asset field. But still it showing only a column with heading asset but no values in it. Is there anything to be done in
    trx "O7Z3", "O7R3" and then in "O7V2" assign FBL3 to the newly  defined line layout and total variant. Is this correct way of  proceeding  or anything else needs to be done.
    Can can any one suggest what needs to be done.
    Thanks in advance,
    Regards,
    Anil

    hi Anil,
    i think that's not possible with fbl3.
    the asset no. is only assigned to the reconciliation accounts by posting purchase/retirement/depr.
    and not on other accounts - the reconciliation account
    are normally not displayed with fbl3 - therefore are transactions from FI-AA (AW01N)
    Andreas

  • Add a special field in Line Item Display.

    Hi Gurus,
    I need to add the field "Entry Date" in the GL report FAGLL03. I added the entry -
    BKPF - CPUDT in the Settings => Special Fields from the menu bar.
    Also mentained the same in SE11.
    It's working fine on Quality Server, but when I transfer the request to Production, it creates an Workbench request only and also the field "Entry Date" is not available for selection in Select Layout - Hidden Fields.
    I think I need to run some program fot the same to execute or anything else. Can you guide me to a proper solution or advide me if I am doing somethign wrong.
    Regards,
    Devang

    Hi,
    Thanks for your knowledge, but I did exactly the same and cant get the Field in  the Field Selection - Hidden Fields.
    Currently referring Note # 984305.
    YES!!!!!!!!!!!!!!!!
    I DID IT
    After referring to the above note, I had to ...
    Call transaction SE37, enter the function module ITEM_STRUC_EXTENSION and execute it with the following parameters:
    BASIC_STRUCNAME                 FAGLPOSY
    EXT_STRUCNAME                  FAGLPOSYEXT
    EXT_FIELDS_TABNAME              T021S
    I_LSTCL                         D
    X_TRANSPORT                     ' '
    Thats it......
    Thanks,
    Devang
    Edited by: Devang_Sangani on Apr 22, 2010 6:02 PM

  • Cheque Number in Vendor and GL Line iTem Display

    Hi
    How can we get to display the Cheque Number in T Codes FBL1N and FBL5N
    Samir

    Hi
    Please follow the paths
    GL Accounts:
    IMG ==> General Leder Accounting ==> Master Data ==> GL Accounts ==> Line Items ==> Define Special Fields for Line Item Disply
    Enter Table PAYR
    Field Name CHECF
    Vendor Accounts
    IMG ==> Accounts Receivable and Accounts Payable ==> Vendor Accounts ==> Line Items ==> Display Line items ==> Define Additional Fields for Line Item Display
    Enter Table PAYR
    Field Name CHECF
    After adding this, when you run FBL1N and FBL3N you can see the cheque number against payment documents.
    Thanks & Best Regards
    Sanil K Bhandari

  • Additional Fields for Report FBL1

    Dear All
    I need to add User Name field (USNAM) and few other fields to the layout for report FBL1(Vendor open line items).
    I have added the field USNAM under "Define Additional Fields for Line Item Display". But the field is still not showing up for selection in the report FBL1.
    Pls advice.
    Rgds
    Nitika

    Hi Nikita,
    Once you have added special filed you have to run the below mentioned program to extend the new filed in FBLxN report.
    Run below program from SE38:
    RFPOSXEXTEND
    BALVBUFDEL
    The correct way to fix this is mentioned in SAP note 984305. Running report BALVBUFDEL resets the buffer.
    The special field is now available in the layout selection.
    Hope this helps.
    Pls assign points as way to say thanks

  • Functional Area in Line Item Display FBL3N

    Dear Expert,
    My system is running on ECC6.0 and functional area is activated.
    I would like to see the Functional Area in Line Item Display (FBL3N) but couldn't get it in any field selection (change layout).
    I have added the field in the GL Accounts> Line Items> Define Special Field for line item display as BSEG - FKBER_LONG
    But I still couldn't get the functional area for each line item in the Line Item Display.
    Please advise. Many thanks.

    Dear Please Configure Through Below Path, You will get Line item wise Functional Area:-
    Financial Accounting (New)>Accounts Receivable and Accounts Payable>>Vendor Accounts>> Line Items >>Display Line Items> Define Special Field for line item display as BSEG - FKBER
    Regards,
    Viswa

  • Reg fbl5n customer line item display

    I n FBL5n report wbs element field value is not displaying
    When posting the invoice through FB70
    wbs element field name PROJK
    I have searched in SDN but any thread not related to this one
    Suggest me how to display the value
    Regards
    Suri
    Edited by: mannem suresh9 on Dec 23, 2011 7:06 PM

    Hi
    If you don't have available this field, you can enhance FBL5N list. Please, see the article [Offsetting Account Description in FBL3N & FAGLL03 u2013 GL Line Item Display Reports|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8011026d-eb5d-2e10-b9bb-d0601949b86a?QuickLink=index&overridelayout=true] by Imran Mohammad Khan. K in this site.
    I hope this helps you
    Regards
    Eduardo
    PD: See also [Addition of Fields in Line Item Display Report Output for TCode FBL1N/FBL5N|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d6c489-aa3a-2e10-db88-deb9114b6854?QuickLink=index&overridelayout=true] by Swapnoneel Mukherjee.
    Edited by: E_Hinojosa on Dec 27, 2011 9:37 AM

  • FAGLL03 - Line item display in ECC 6.0

    Hi
    We are on ECC 6.0.  When i execute the report FAGLL03 for Line item display and double click on a line, system pops up a window with Line item details rather than actually taking me to Document display for that Line item
    What settings do i need to do so as to drilldown to a document directly from a line item
    Thanks in advance
    Shiv

    Thanks a lot Srikanth.  This works for FAGLL03. What if i want to execute FAGLB03, then go to Line items by double clicking balance and then want to view document
    Thanks in advance
    Shiv

  • GL display for inventory account which are not defined as line item display

    Hi All,
    We have inventory gl accounts which are auto post accounts , these accounts get posted when grn is done. these accounts are not defined as line item display accounts, but if we execute the T code: FS10 we get the gl balance display and not line item display.
    Our requirement is that we should be able to view the line item display matching the GL account balance in that GL account.
    Can we get the report in MM module line items wise display.
    Regards
    Prashant P. Zinge

    Hello,
    You should use RFSEPA01 program via execute SE38 transaction.
    This program activate line item for each account. Activation means, this program generate line items to BSIS table. So that after this program running, you can see line items in FBL3N.
    Regards,
    Burak

  • Additional Field(customized) in G/L acct bal line item display FS10N-FBL3N

    Steps done:
    1st: I appended an extra field(customized) to RFPOS and RFPOSX structures.
    2nd: Went to FIBF and looked for BTE applicable and found sample_interface_00001650. (Line item display: Add data per line)
    3rd. I copied sample_interface_00001650 with a name of zsample_interface_00001650 and added line of codes for selection to fill the extra field I added.
    4th. I assigned the event found in FIBF=>Environment=>P/S Modules=>of a SAP application.
    5th. I executed RFPOSXEXTEND program in SE38. After running, RFPOSXEXT was updated but not RFPOSEXT.
    I run FS10N and check for the field I added if existing. The extra field is existing however when I tried to move the field to the columns to be displayed in ALV, I got an error saying that there are inconsistencies in table T021S and RFPOSEXT.
    Please help. Thanks.
    Is there a certain program needed to update RFPOSEXT just like RFPOSXEXTEND for RFPOSXEXT?

    Hi ,
    Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it  shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
    Thanks
    Vivek

Maybe you are looking for

  • T.code for screen painter

    anybody tell me how to create t.code for my screen created in se51

  • Employee number is mandatory at item level

    Dear experts I want employee nuber mandatory at item level at the time of saving order , pls give me ur suggestion while customising incomplition log.  pls help me out Regards vikas

  • Problem with adobe air ajax PUT request

    Hi, Sorry for my english. I would like to send a XML document to a server with AJAX XmlHttpRequest Object. I use the PUT method. Adobe Air sends the PUT request without the contents and set the contents-length header to 0. If I replace the PUT method

  • HT1539 security questions are asked when i try to authorize a digital copy on itunes

    when putting in a code for a digital copy of a movie i purchased i get the "to help ensure the security of your apple id choose three questions and provide your answers below" thing. why is this happening and how do i input anything? the only planes

  • Links aren't opening properly

    Hi everyone,  in the past two months my iMac has started giving me a very annoying pop up window about half the time a click a link.  Rather than simply opening the link I get a pop-up that asks me if I want to open in a new window, or open in a new