Define Change Profile

Hello Gurus,
I have a problem when I define change Profile for a network type.
I made these steps:
- I created a New Change Profile with T-code OPSG, setting an error message when I delete material component by realised activity
- I inserted this profile in my network type
- I created a new network using my network profile linked network type
Why the deleted of the network's activity, the system doesn't give me any error message?
Thanks
Nicola

Change Profile is used in PS only for configurable networks.
Refer below link for details on network configuration process in PS.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/4c/225f8146e611d189470000e829fbbd/content.htm
Regards
Sreenivas

Similar Messages

Change Profile

hi,
i made some changes to the Change profile..(PS0001 network general)
however i cant seem to find where the change profile is assigned.
i assumed it is assigned to a network type of network profile but i didnt find any field for it..
so where in the system do you assign the change profile?
thanks in advance..

Hi,
This link it may help you.
Define Change Profile
Regards
Chandra

Screen "Define Status Profile for User Status" should not open in changemod

Dear all ,
After following the path CRM>SPRO>SAP IMG -->Customer Relationship Management -->Transactions -->Basic Settings --> Status Management -->Define Status Profile for User Status.
the screen opens in change mode & allows user to carry out the changes, this is very crucial screen & hnece should not be in open mode ,kindly advice on closing the same.so that it opens only in display mode for production system.
Regards

Hi Milind,
To Block changes to any Object their is a Provision for the same in Client Deatils Screen
Go to TCode:SCC4
Check the Tab Cross-Client Object Changes
Try setting the Option (3.No Changes To Cross-Client Customization Objs)
Following Options Symbolises:
Changes to the Repository and cross-client Customizing permitted
There are no restrictions on the maintenance of cross-client objects for the client when this setting is used. Both cross-client Customizing objects and objects of the SAP Repository can be maintained.
No change to cross-client Customizing objects
Cross-client Customizing objects cannot be maintained in the client with this setting.
No change to Repository objects
With this setting, objects of the SAP Repository cannot be maintained in the client.
No change to Repository and cross-client Customizing objects
Combination of both restrictions: Neither cross-client Customizing objects nor objects of the SAP Repository can be maintained in the client.
(Choose This One it Should Resolve your Problem)
Hope it answered Your Queries..
Thanks and Regards,
RK.

[solved]script fails when changing profile through powerdevil.

i use ondemand governor and i want to change up_threshold value.
Whenever i change profile through powerdevil up_threshold gets its default vaule of 80.
what i did was to create a script named threshold containing the lines:
#!/bin/bash
sudo sh -c 'echo 50 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold'
i have also set through /etc/sudoers that this script is passwordless for my user.
if i run the script, it successfully changes the value. It also runs successfully if i put it in startup.
My problem is that it fails to run when i choose it to run when a profile loads through powerdevil. I am refering to the feature shown below :
at first i thought that this function has a problem. so i chose to run kate, and when i changed profile, kate started immediately. So i guess that there is a problem with my script.
Any ideas?
Last edited by mechmg93 (2009-10-20 20:14:30)

I hope someone reads this thread also its already marked as solved...
Anyway, i would like to use CPU frequency scaling, but in the powermanagement settings,
i cant shoose anything for frequency scaling.
What do i have to do to be able to set "ondemand" or "always lowest frequency"?
Wich daemons and/or modules do i have to activate to change the frequency policy?
Would be very nice if someone could help me.

Unable to change profiles on Express

I have both an AirPort Extreme and an Express. I have the Extreme as my base station and my Express configured to join my network to stream AirTunes on my stereo. This setup works fine, but I want to take my Express to my parents' house and use it as a base station there and be able to use my laptop wirelessly. I created two profiles, one for home and one for at my parents. The home profile includes the join existing wireless network option, the parents profile creates a wireless network. I created the profiles while at home, took the Express over to my parents and jacked in to their router. AAU did not recognize the Express. The yellow light just kept blinking. I did a reset on it and went through setting it up using AirPort Setup Utility. Worked fine, profile was still there. Went home and AAU didn't recognize Express again. Hard reset, etc.,etc. I was under the impression that by simply plugging in the Express that AAU would see the Express, I would select it, click configure, and select my profile. It doesn't seem to work like that. I even tried connecting some CAT5 cable between my PowerBook and the ethernet connection on the Express to no avail. How are you supposed to change profiles for different locations?
PowerBook G4, Blue and White G3>4 Mac OS X (10.4.4)

The problem is that client mode on the Express turns
off the access point functionality so that you cannot
connect to it. It's a necessary consequence of a
device that's as versatile as the Airport Express.
Hmm. Unfortunately I guess that makes sense (and would explain why plugging in with an ethernet cable didn't even get me access). So the only way to get around a reset is to change the profile prior to pulling the AX off the network it's a client of? Makes sense, but still seems like an unresolved design problem.
The upside though, if I do a bit of infering from what you've suggested, is that the AX (currently running as Remote) may switch to Client automatically when I get back to my other location. If it does, then at least one pre-emptive switch declaration is eliminated. One could hope.

How to add the new character in FDI1FDI2 Define/Change Reports?

Hi,
There are some fixed charcters defined in the T. Codes FDI1FDI2 Define/Change Reports, can we add the characters here based on which we can get teh desired output. If yes, hen please tell me how to add the characters?
Thanks in advance...
Regards
Nitin

thanks

How to define a profile

I need to define Password limits using an Oracle Profile.
Can I define a profile using SqlDeveloper Data Modeler 3.0?

Hi,
No. I'm afraid Data Modeler does not support the definition of Oracle Profiles.
David

Basic Order View - Define View Profiles

In ECC 6.0, we have an option to customize the work order screen as per the busiess needs in the configuration path:
Plant Maintenance and CS -> Maintenance and Service Processing -> Functions and Settings for Order Types -> Basic Order View -> Define View Profiles
Question -> Is there a view profile defined by SAP for standard SAP work order screen?
We have a requirement to modify the standard SAP work order screen where we have to add additional tabs. Since there is no profile defined for standard SAP work order screen, we have to build from the scratch which takes a lot of time.
Any suggestions?
Thanks

Thanks SN. Yes, I am aware of the user exit and also that we can configure the screens of work order in ECC 6.0 using SPRO but the only problem is that we have to build it from scratch. My question was to know if SAP had standard screen templates or profiles like they have for Notiification. Anyways thanks for your response, I got the below response from SAP for my question.
I've checked if its possible to customize the screen selections
like it can be done for notifications and unfortunately it isnt
possible in the standard system
The only customizing that can be done for order can be found using the
following path:
SPRO>>>IMG>>>PLANT MAINTENANCE & CUSTOMER SERVICE>>>MAINTENANCE &
SERVICE PROCESSING>>>MAINTENANCE & SERVICE ORDERS
You will find the following options:
DEFINE FIELD SELECTION FOR ORDER HEADER(PM)
DEFINE FIELD SELECTION FOR ORDER HEADER(CS)
DEFINE FIELD SELECTION FOR ORDER OPERATION(PM & CS)
DEFINE FIELD SELECTION FOR ORDER COMPONENT(PM & CS)

Define Alert Profiles

Hi Experts,
I am working on CRM 2007. As per my requirement
I want to Define Alerts Profiles to make alert on Different Activities Like Discounts and Promotional Scheme.
So, How I can define Promotional Activities in CRM-2007?
Thanks,
Krishna

Hi Krishna,
First assign IC_MANAGER business role to ur user id. For that u have to assign this role at organization level. Go to PPOMA_CRM> Assign Position and ur userid to this organization> now choose goto -->there u will find Business Role assignment.
Or u can take help from ur functional consultant.
Now when u will login to Web UI u will find IC_MANAGER business rols choose that one , then in navigation bar u will find a link alert. From there u can generate Alert. There are some sample alert already exist u can take help from them.
If u don't find alert link in navigation bar then u have to activate this link from Business Role.
Regards
Gaurav

TC related for IDOC (Defining Port,Defining Partner Profiles...etc) RFC and

Hi All
Can anyone pls give me all the TC related for IDOC (Defining Port,Defining Partner Profiles...etc) RFC and BAPI
Thanks
ss

Hi SS..
 SM59-For creating the RFC destination
 we21- For ports
 we20-Partner profiles.
For more inforamtion Please look at the below information:
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP XI towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
 Thanks and Regards,
 Chandu.
Message was edited by:
 Chandu
null

What is the significance of define status profile for user status

hi friends
what is the significance of define status profile for user status. what does it contain
Regards
Vinny
Edited by: vinny novice on Dec 29, 2008 1:53 PM

Hi
please see Kathir's article on ststus profile
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/supplier-relationship-management/how%20to%20configure%20user%20status%20in%20mysap%20srm.pdf
regards
Muthu

Facebook change profile pic from app

Please answer me..
How do i change my profile pic from fb app?

I think only iphone doesnt have that "change profile picture" option on the app..
This isnt fb problem.. Its iphone! Let me ask you can u even change your prof pic on the app? Ill give you 100$ right now if u can bro

Increase Performance without changing profile parameter

Hi folks,
How to Increase the Performance without changing profile parameter ?

One of the easiest ways to gain some performance is to turn off any unnecessary services running on the server. Depending on the platform, you can gain some memory by just removing these (turn off sendmail or postfix if you are not sending any messages [monitoring or otherwise]).
J. Haynes
Denver, CO

LR4, PS5, PS6 user defined camera profiles

I'm on Mac OS 10.8. Where are user defined camera profiles stored? I can see older profiles in LR develop module, but cannot locate the path.

Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
It's a hidden folder on 10.8 - go to Finder > Go menu and when you hold down the Opt key, Library will appear in that list.

N95 shortcut to change profile

Hi,
does anyone know of a shortcut to change profile (ring tone - to vibrate to be specific) quickly on the n95?
instead of going tools->profiles->activate...a bit cumbersome
thanks,
mike

Yes indeed, you can use voice commands to change between profiles. However, it could take a while to train voice commands to understand you, unless you have a South African accent. Rumour has it that the person who programmes voice commands is South African.

Define Change Profile

Similar Messages

Maybe you are looking for