Define Field Selection for Move-In Contract Data
In Move-In customization, in IMG activity u201CDefine Field Selection for Move-In Contract Datau201D when you go for u201CField Selection u2013 Modifiable Fieldsu201D Screen (Transaction is EQ07), I am seeing four buttons as follows.
u2022 Modified
u2022 Influencing
u2022 Screen Groups
u2022 Influences
I would like to know the applications of that buttons.
Also, if I click the u201CModifiedu201D button, it takes me to another screen in which I am seeing seven buttons as follows.
u2022 New Values
u2022 Delete Value
u2022 Influencing
u2022 Modifiable
u2022 Screen Groups
u2022 Influences
u2022 View
It would be really great if someone explain me about this.
Thanks,
Meenakshi Sharma
hi meenakshi
here are some data 4 u
modified---if u click that u will come to know whther any field is modifies or not previosuly
influence--after u make a modification the effect or the change is shown in influences
screen gpr os nothing but all the main and sub screens involved for a particular transaction
influencing field is something like u have some connection witht that field,for example click screen grp and screen modification in contract and then click infuencing u can see the 2 fields whch are set as influeincg fields for contract
u can change the selection fro i/p to diaply and save it and see the changes or details showed by clicking each button..hope u willl finds a lot urself
kr
raj
Similar Messages
-
Field selection for movement type 601 account 894025 differs for cutomer
While posting goods after saving delivery merror message
Field selection for movement type 601/aact 894025 differs for customer goods movement
I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601 KONTO Optional field
Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
Please provide your valued inputs why this is happening?
Thanks for your time.
RajivHi Raja,
Thanks for prompt reply.
I shall appreciate if you elaborate how to check
check the Field selection goup in control tab for that GL
I tried OBC$--> (Is this correct?)
I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
Profit center, cost object are in G004 as supressed field.
So should I make optional? So thing will work.
Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
Thanks for yr time.
Rajiv -
FIELD SELECTION FOR MOVEMENT TYPE AND ACCOUNT
Hi,
I am trying to do the Post Goods Issue (PGI).
But, the system is throwing an error as mentioned below.
Field Selection for Movement Type 901 / Account 4070000001 differs for Customer Goods Movement (015)
I made the Cost Center as Required Entry. But, there was no effect on the PGI.
I could not make out the exact error.
Please guide me properly in this regard and do the needful.
Thanks in advance.
Thanks & Regards,
Srinivasa M.S
+91-9910077829Hi,
On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
Regards
Chandra Shekhar -
Where to find "Define field selection for Individual approval view" in ECC5
Hi,
I'm trying to find where I can configure the columns for the managers approval view in the backend in ECC5.
Time sheet>Setting for all user interfaces>Approval procedure>Approve working times> Define field selection for Individual approval view, doesn't appear to exist.
Any help appreciated.
RobRob,
Try this:
IMG->Integration with Other mySAP.Com Components->Business Packages/Functional Packages->Manager Self-Service (mySAP ERP)->Working Time->Approve Working Time->Define Field Selection from Individual Approval View
Alternatively use SM34 and go to view cluster VC_PT_FIELD_SELECTION and enter the screen area as CTS.
Hope this helps. Good luck.
Regards,
Raj. -
OPUK - Define Field Selection for WBS - diff bet. Modified and Influence
Hi All,
Kindly advise what is the difference between influencing and modifield field's for 'Project Systems > Structures > Operative Structures > Work Breakdown Structures (WBS) > Define Field Selection for Work Breakdown Structures (OPUK),
Thanks!
Regards,
Vivianmodified field is the field on which the impact is registered i.e hide, mandatoru etc
Influence is the field that is the reason why the modified field needs to be changed
for example if you have two project profiles
then for one project profiel you can have say the resp cost centre mandatory and for the other you can have the resp cost centre hidden
In this example the project profile is the influencing field and resp cost centre is the modified field -
Field selection for movement type 561
Hi Guru's,
i want to add value field in the movement type 561 to while uploading the stock i can add the total quantity with total value, if i am wrong correct me, with detailed process.
Regards,
qsm sapHi QSM SAP!
The value of the stocks to be uploaded using MvT Type 561 can be placed in the External Amount in Local Currency Field. To show this field during goods receipt:
SPRO - MM - IM and PI - Settings for Enjoy Transactions - Settings for MIGO - Field Selection per MvT Type - New Entries - (561 EXBWR) then set as either required or optional.
Hope this helps! =) -
Define field selection for work breakdown structure
Hello,
I have the follow problem in PS.
I want a structure with the operative indicators dependent from company code and level.
EXAMPLE
Company code A Level 1: only Billing elements inputable
Company code B Level 1: Billing elements displayed , accounting element required
In the transaction OPUK I can do this for only company code or only level.
Is that right?
Can you help me to resolve this problem?
Thanks allHi,
You can set up like this
If billing element is : Yes
Than following fields are required / optional / Hide
If billing element is: No
Than following fields are required / optional / Hide
Using the influencing option button.
I dont think you can setup at company code level , but defiantly can do at authorization level
Enjoy SAP
Please give points if ans is useful -
Use of Field selection for Multilevel list Display Equipment/Function loc
Dear Expert,
Anybody suggest me that how can we use the feature of Equipment & function location settings as given SPRO path.
Plant Maintenance and Customer Service ® Master Data in Plant Maintenance and Customer Service ® Technical Objects ® Equipment ® Define Field Selection for Multi-Level List Displays of Equipment.
Plant Maintenance and Customer Service ® Master Data in Plant Maintenance and Customer Service ® Technical Objects ® Functional Locations ® Field Selection for Multi-Level List Displays of Functional Locations.
Your help & suggestions are much appreciated.
Regards,
AkhileshDear AKhliesh,
This customizing setting is for the T-code IE07. You can customize view of IE07 in different strcuture with required fields wants to didplay or suppress.
Regards,
Kaushal Rai -
Define Field Selection - PM Order
Hi,
We have Order types PM01 and PM02, processing for Planning Plants 1000,2000, 3000 and 4000.
Here for Planning Plant 1000,we have set up Equipment field, as mandatory for both Order type PM01 and PM02. This was set up through, Field Selection for Order Header Data, through Influencing Order type PM01 and PM02 and made Equipment as a mandatory field.
As this influencing field as made as per Order type PM01 and PM02, for Equipment as mandatory this is applicable for all Plants 1000,2000, 3000 and 4000.
Now we no need this Equipment as mandatory field in Order type PM01 and PM02 for Plant 4000. For only this requirement, can we make the influencing field for both Order type PM01 and PM02, for only Planning Plant 4000, not Equipment as a mandatory field.
This must not disturb the existing Equipment mandatory field for Order types PM01 and PM02 for other Plants 1000, 2000 and 3000.
Kindly provide your suggestions.
Raja.Kutti Raja,
If you want to do this for all the order Types for Planning Plant 4000, you may achieve this by following Steps:
1. Go to Field Selection for Order Header Data and Reference Object (Plant Maintenance and Customer Service --> Maintenance and Service Processing --> Maintenance and Service Orders --> Define Field Selection for Order Header Data (PM))
2. Click on Influencing button and Double click on "Planning Plant".
3. Enter "4000" in Contents Fields and Select Radio Button "Input" instead of "Required" next to Equipment field.
For Rest of the Planning Plants Equipment will remain to be mandatory but for 4000 and all order Types, it will be an input field but not as Mandatory.
Hope this helps.
Chin2. -
Field selection for mvmt type 543/acct 895000 differs for vendor goods mvmt
Hi Pals,
While i post for goods receipt for subcontracting items, it is showing this error
" Field selection for movement type 543 / acct 895000 differs for vendor goods movement "
Kindly help me to resolve this plz.
Thanks&Regards,
PrasathHello
what you need to do is, run the program RM07CUFA check for the field status of the particualr movement type for which the system is throwing the error.
Note that if there is a mandatory entry under G/L account then it should be a mandatory entry under movement type field status also.
Go to FS00 and Select your GL account and click on Change Mode and in Create/Bank/Interest tab double n Field Status Group.
Then goto OBC4 and make the change in the field selection for the field status group you got from FS00 for that account. (make the vendor for goods movement as display/optional/required as in the movement type)
Also see the field selection for movement types in SOMCJ for movement type 543.
Regards -
Field selection for Service Master
Hi
is it possible to differentiate the field settings based on the service category, i want to make few fields optional.
Thanks
AnkitHello Ankit ,
Please go into Transaction SPRO -> SAP Reference IMG -> Materials Management -> External Services Management ->
Service Master -> Field Display for Service Master -> Define Field Selection for Service Master ( Individual Maintenance ).
Click on the "Influencing" button. This is where you should be able to make the changes to each field for all of your Service Categories.
I hope this information has been helpful.
Best Regards,
Frank -
IE07 and error 'Maintain field selection for Fleet data in Equipment List'
Hi all,
When running transaction IE07 (multi-level equipment list) , I get the following error: 'Maintain field selection for Fleet data in Equipment List (Multilevel)'
I can't see where is the missing configuration point.
We have activated business function LOG_EAM_CI_3.
Have anyone encountered this error before?
Thanks,
P.Hi Narasimhan
Could you give more details ? where is located this setting?
Thanks,
P. -
Hi, can anyone advise if there's a field selection for MB02? Reason is bcos i wan to make some fields editable after user posted the GR document in MIGO.
Thanks
PPHi!
The transaction code MB02 was designed to change only some 'information fields' like:
- position text
- goods recipient
- material slip
- doc.header text
MB02 is not able to change important input fields. If those entries are incorrect, you have to use MBST or MIGO to cancel the whole posting. After that you have to do the goods movement again with the correct data.
Best regards,
Esther. -
Hi Experts
I am working on the field selection for Networks. In TCode CJ20N, Network Header Overview, the Resp. Cost Center field (on Assignment Tab) is avialable, however, the same is not showing up in the Field Selection for Networks (TCodes: OPUA, OPUB and OPUC). Similar is the case with Plan Cost Calculation drop downlist (on Control Tab).
How can we define the field selection for these fields?
Regards
ShoaibAP Thanks for the reply.
As you mentioned, the Resp. Cost Center (PRPS-FKSTL) and Req. Cost Center (PRPS-AKSTL) are available in the WBS on Basic Data Tab Page. However, the Resp. Cost Center (CAUFVD-KOSTV) field is also available on the Network Header Level on Assignments Tab and the dropdown list Plan Cost Calc (CNDOK-NW_PLANCOST) is also showing up in the Network Header, Control Tab Page.
The fields Resp. Cost Center (CAUFVD-KOSTV) and Plan Cost Calc (CNDOK-NW_PLANCOST) are not available in the field selection for Networks as mentioned earlier. The Resp. Cost Center and Req. Cost Center on WBS are available on the WBS Field Selection.
How do we control the field selection for the Resp. Cost Center (CAUFVD-KOSTV) and Plan Cost Calc (CNDOK-NW_PLANCOST) on Network Header Level.
Regards
Shoaib -
Purchase order field optional for Movement type
Hi SAP friends ,
Please let me know the config path to make the purchase order field as optional for particular mvt types that are used in MIGO transaction to receive the overage stock or reversal of overage stock
Regards,
JR.Hi John,
If your posting a 101 movement against a purchase order then there is probably no way of making the PO optional, as this is a designed process
I guess I need to understand the process in more detail
In the Interim please look at the following customising settings
Materials management > Inventory management > Inventory management and PI > Field selection for for goods movement
Materials management > Inventory management > Inventory management and PI > settings for enjoy transactions > fields for goods movements
Regards
Steve
Maybe you are looking for
-
Capture document no after saving a set of data using BDC
Hi All, Can u give a useful solution for caputuring data in a transaction.the scenario is:- 1.an excel sheet data should be uploaded in a transaction O3URV_SS0 using BDC.---- done with call transaction 2.it will save all the line items associated wi
-
Hello Experts, I am facing a problem with loading classes. i have written one application which is running on server.in that application want to use certain jars(Classes)and those jars anmes and classes inside the jars are same.based on the condition
-
Reverse Asset AUC settlement with Internal order
Hi Experts, User wrongly assigned Asset Internal Order to Expense GL Code, therefore we would like to reverse all the AUC settlement pertaining to that Internal Order. When we execute KO88, reversal its appearing one of the settlement. Please advise
-
Sun Java Directory Server Query - users in "config" tree
Hello, I would like to find out if Admin users in the "config" tree have a password policy applied to them? I have tried running the following command (which shows password policies for users in "people"): # ldapsearch -h server1 -p 389 -D "cn=Direct
-
Batch Export drops my Smoothcam clips!
I have successfully added Smoothcam to a large batch of Apple Pro Res 422 HQ clips and rendered the entire timeline. I then highlight all the clips, place them in a bin in my browser, highlight and batch export them as XDCAM 1080p24 35Mbs clips. The