Define groupings and assign number ranges

Hi,
I want to ask about customizing
In Recacust --> business partner --> Relevant setting for BP in RE context --> number range --> Define groupings and assign number ranges
There are Internal Standard Grouping column and External Standard Grouping column.
What is that for ? if i set both of them to active, what's the effect ?
Thank you

Hi,
If I tick the "ext.std grping" in one of BP grouping (for example in grouping 0002). Grouping 0002 will be used as standard grouping. The BDT selects this standard grouping if a business partner number was assigned to a business partner when the latter was created, but not a grouping.
Then,,, when i try to delete external grouping that used as the standard grouping, there was a message "External standard grouping 0002 must not be deleted"
How to un-tick this "ext.std grping" ?
I think this affected the BP creation. Now, I can't create BP, there always an error message "GET_BUSINESS_SYSTEM_ERRORAn error occurred when determining the business system"
Thank You

Similar Messages

  • Question: How to assign number ranges to the Official Excise Document Numbe

    Question: How to assign number ranges to the Official Excise Document Number
    Field name is: EXNUM, table name: J_1IEXCHDR
    SAP CIN
    Dear expert,
    I will briefly explain the scenario:
    I have created return po.
    Process MIGO w.r.t. return PO- Material document generated.
    Process: J1IS - excise invoice other movement create.
    --> Now I want to print the document --> I m trying with T-code J1IP --> entered all the required data --. Used out put type - J1I0
    But I am not getting the list of document for printing and even print is not coming.
    There is no print document getting for a printing.
    When I checked in an above said table (mentioned in question), I found that for transaction type OTHR, there is no number ranges defined for official document no.
    And because of this reason I m not getting any document in the print.
    Can you Pl extend Ur help and Pl suggest me where (path or transaction) the number ranges can be maintained for the official excise document No.
    Thanking you all n advance and expecting your earliest response.
    Regards
    om

    Dear Friend,
    J_1IEXCHDR this table stores the all the excise documents created while excise transactions are done ,
    for that Goto j1i9 or SNRO  in these transaction you maintiane the number ranges  for the
    J_1IPLA2     PLA part II number range object
    J_1IRG1     RG1 Number range object
    J_1IRG1_T     No. Range for RG1 - Excise group / Material
    J_1IRG23A1     RG23A part 1 no. range object
    J_1IRG23A2     RG23A part II number range object
    J_1IRG23C1     RG23C part I number range object
    J_1IRG23C2     RG23C part II number range object
    J_1IRG23D     Folio Numbers for RG 23D
    like these  lot of objects are there  for them u maintiane the no. ranges
    Regards
    Pramod

  • Problem in assigning number range to support desk messages

    Gurus ,
    we are in the process of configuring service desk in solution manager
    7.0 .
    so far the following steps were done ,
    - implemented note 898614
    -Activate Solution Manager Services via SICF
    -activated BC sets for service desk
    -Fetched SAP components vis DSWP
    -Assigned number range for ABA notification via DNO_CUST01
    but while assigning the support desk for service messages via ,
    SPRO--> SAP Solution Manager --> Basic Settings --> SAP Solution
    Manager System --> Service Desk --> Number Ranges for Notifications.
    Then press the execute icon ( ) next to Assign number range for Service
    Desk Messages.,
    when assigning internal number as '01' and external number as '02' and clicking on save button we
    get the error as "Enter valid number range interval '

    Hi Susin,
    you may have a look at this to get more information about number ranges
    http://help.sap.com/saphelp_nw70/helpdata/EN/2a/fa02fd493111d182b70000e829fbfe/frameset.htm
    A number range is a range of numbers which are assigned to objects uniquely.
    Such numbers are some kind of identifiers (which may be used to describe obejcts). In your case the ABA / Basis notifications are identified by those unique numbers.
    Hope this clarifies things a bit.
    /cheers

  • New Document Types and new Number Ranges

    Hi,
    Plz tell me How to configure New Document Types and new Number Ranges for Services and Asset Purchases.
    How can i maintain Services with or without Master data.
    Plz tell how much services are there and how to configure step by step

    Hi
    New document type can be configured in SPRO - SAP IMG- Material management - Purchasing - Purchase order - Define number rabges / define document types.
    With out service master straightaway you can create the Service PO with account assigment.
    AC03 - Create service master record.
    ML10 - Model service specifications
    Then Service conditions ML33 or ML39 or ML45
    Create the PO and then do the service entry in ML81N
    Regards,
    Raman

  • Internal and external number range for a deivce

    Hi Experts..
    We have a client requirement where in we need to have both external and internal number ranges defined for the device.
    But while creating a device it always takes external number range and never takes internal number range.
    What is the possible reason for it and how can i rectify it.

    Hi Arvind
      do u mean even when an  externam  name is provided in  the device creation and still the screen does not accept it?
    let me know
    kr
    raj

  • Need to assign number range for MMR

    Dear All,
    Need to assign number range for material as MB00001 to MB99999.
    How to do this
    Rgds
    Francis

    Hi,
    USe Tcode MMNR,
    you assign number range to a group
    then youassign material type  to this group
    you have to respect these two rules
    "No overlaps between internal and external number assignement for a given groups"
    "No overlaps between intervals of different groups"
    regards
    regards

  • Same FI and SD number ranges

    Hi,
    How can in the system FI and SD number range for billing documents be made same.
    thanks
    Rekha

    Hi,
    FI and SD number ranges can be made same for billing documents. SD number range should be made internal and FI number range should be made external.
    Thanks
    G.Bharathi

  • FI and SD number range same

    Hi,
    How can in the system FI and SD number range for billing documents be made same.
    thanks
    Sekhar

    Hi,
    FI and SD number ranges can be made same for billing documents. SD number range should be made internal and FI number range should be made external.
    Thanks
    G.Bharathi

  • Whare we assign number range fi document

    Hi Friends,
                                Iam posting J1is but in this Fi document is not genarated  where assign the mumber ranges for this Fi document

    Hi Kavitha,
    In the SAP System, every document is assigned a number that identifies it uniquely within a fiscal year and company code.
    There are two types of number assignment:(i) External- By the user (ii) Internal- By the system
    Number range in SAP system can be defined in following way.You can define number ranges for each company code. Thus, each company code can use the same number interval.You can define number range intervals as year-specific.
    You define number ranges in the system separately for master records and documents. You can therefore use the same number range keys for both master records and documents.
    In the Financial Accounting (FI) component, you can also define alphanumeric number ranges. In this case, however, the document numbers can only be assigned externally.
    In Customizing for Financial Accounting, carry out the activity Define Document Number Ranges under Financial Accounting Global Settings -> Document ->Document Number Ranges.
    For every number range, you must specify the following parameters:
    A key, a validity date (a year value) until which the number range is valid and an interval from which the numbers are chosen. The intervals for number ranges must not overlap. Whether the number range is used in internal or external number assignment.
    Kindly award poits if I had been of help to you.
    Rgds
    manish

  • Assigning number range for BP

    hi,
       Where we want to assign the number range for the Business partner in SRM...
    Any Transaction or in spro Path ???
    thx...

    Hi,
    SAP Implementation Guide>Cross-application components>SAP Business Partner>Business Partner>Basic Settings-->Number Ranges and Groupings.
    Hope this helps
    Arshad

  • Lexicographic flag setup and material number range change

    Hi gurus,
    got the following situation:
    AS IS:
    Tcode MMNR: Number range for material master part number: AAAAAAAAAAAAAAAAAA   to   ZZZZZZZZZZZZZZZZZZ  (lenght 18, external assignment)
    Tcode OMSL: Lexicographic flag IS NOT setup
    Tcode OMS2: For all material types flag "External no. assignment w/o check" IS SETUP
    Basically we can't create numeric only part numbers.
    The new requirement is to be able to create numeric part numbers like:
    1234
    12345
    0123
    01234  (where the leading zero is a significant character for the part number)
    By doing the following changes:
    MMNR: change number range 000000000000000000  to ZZZZZZZZZZZZZZZZZZ
    OMSL: setup lexicographic AND leading zeros flag
    OMS2: clear flag for External no. assignment w/o check
    I see I do achieve the result: numeric part numbers can be created, leading zeros are managed in the correct way and all numeric part numbers are LEFT-aligned, so looking to MARA you would see part numbers like this:
    00012345
    012345
    012345V
    09CATALIST1
    0AFVAU0001
    12345
    23225V
    23243V
    2SIMBACK3210
    I did already tried all the above changes in the quality system, then created a numeric part number and an alfanumeric part number, for both of them did create a PO, Inbound delivery, posted MIGO, created a sales order, outbound delivery, PGIed without any issue, stock was displayed and managed correctly by the system, same for material docs.
    We already thought about BW, so in case we do the changes BW would be ok.
    Apparently everything is fine so I should go for the production system BUT........  in my mind I'm thinking that OMSL Tcode is usually setup day 1 of an Sap project and then usually you forget it... I have the fear that even if everything looks fine (and Sap allows me to change the customizing), I'm going to muck up the system...
    Have you ever had the same to do ?  I already saw posts similar to this one but already existing conditions were different so to me this case looks like unique so far..
    Any help, suggestion, whatever will be highly appreciated, especially cause I have to take a decision by tomorrow morning
    Many thanks in advance !!
    Enrico
    Edited by: Matt on Aug 13, 2011 7:39 AM - profanity removed

    As you never had numeric numbers, it should not create a big problem.
    I am working in a system with lexicographical setting in use.
    But you have to keep in mind that your sort sequence is quite different to numeric numbers, like this:
    1
    10
    11
    12
    2
    3
    31
    311123
    32
    32012
    4
    And you may get the one or other issue if you download material numbers to Excel, with wrong settings you will loose your leading zeros.
    A similar effect happens most of the time if user not very familiar with Excel give you a file for an upload, as this often is prepared without leading zeros, which could cause a load to the wrong material if the remaining number would be a duplicate:
    0123 and 123
    Of course is a selection by number range  not that easy as it is with numeric numbers.  Usingthe first example a range from 1 to 3 includes materials 10, 11 and  12 as well

  • Invoice and Accounting Number ranges

    Hi,
    I have a requirement where the invoice number and the accounting document number should be same. Ie: If I generate an invoice with number 101. The same number should be populated for the accounting document as well.
    Regards,
    Sam

    Hi Sam,
    Yes. The path is SPRO -> Sales & Dist -> Billing -> Billing Documents -> Define number ranges for billing documents.
    I dont think you can have an external number range for a billing document. Infact the provision is not available in the billing document type config screen.
    Regards
    Nadarajah Pratheb

  • Skipping number from assigned number range in PR

    During the creation of Purchase Requisition system is not issuing a sequential number. For instance the number range assigned to document type is '120000000'  system issues number 120000001 to first PR. If we create second PR the number is not 120000002 but its either 120000005 or some other number from the same number range but not next number in the sequence.

    hi,
    For Requisitions generated by the MRP, if the fixed indicator on the
    Requisition is not selected or the release indicator does not have a
    final release, then when MRP is run again the original Requisitions can
    be overwritten with a new one if the requirements change.
    It depends on the settings and the different fixing and planning mode
    indicators used in MD01 or MD03 or MD15, ....
    So what may have happened in your system is the following :
    - The MRP created Requisitions that were consequently not fixed (i.e.
      EBAN-FIXKZ = blank), which is normal.
    - A user changed the Requisitioner (AFNAM) and / or the Purchasing
      Group (EKGRP) in ME52N.
      This did not fix the Requisitions, which is also normal.
      A Requisition becomes fixed in ME52(N) only if at least one of the
      following fields are changed EBAN-MENGE Quantity
                                   EBAN-LFDAT Delivery date
                                   EBAN-FRGDT Release date
    Please also  check BADIs and user exits that changes the requisition.
    Best Regards,
    Arminda Jack

  • HU and SU number range

    Hello,
    If storage location is HU and WM managed ( SU management active), is it required that for the number range of  HU simialr overlapping number range has to be maintained for SU (assigned to the warehouse)?

    Hi,
    you activate handling unit management independent from storage unit      
    management.                                                                               
    Only in case if storage location is full-WM- AND HU-managed the storage  
    unit management is always active and HU numbers are taken over as SU     
    numbers. In all other cases HUM and SUM are independent from each other  
    and number ranges must be set a way that they are not overlapping.       
    Regards,
    Ely

  • Assign number range to Doc type

    Hi
    I have created a  new doc type - i am not sure for which co code business has to assign it... how can i create a new number rnage without co code specification... I know i can assign new no range thru OBA7, but let me know where to create it without co code specification
    Thnx in adv

    Hi,
    If I understand you correctly, you want to create one number range for a document type that can be used by all company codes. Eg Doc Type ZA created. Number range assigned is 10000  to 20000. You want all company codes (1000, 2000, 9000 - 3 company codes in  your system )to use the same number range.
    Here is my question
    1. When a document is created (irrespective of companycode), system should pick the next document number. Eg co.code 1000 creates document number 10351, then if a document is created in co code 2000, system should pick 10352 as document number. Am I correct?
    These type of continous numbering is not possible for FI postings, but they are possible for Material documents, CO documents.
    I am thinking of a different way to get this. Create all these document number range in each company code and make them as externally assigned. Then while saving a document, based on some abap coding that you write, pick the last number used in all company codes and populate the next document number to save.
    Hope this is what you want.
    Bye
    Vijay

Maybe you are looking for