Define Message Types for Purchase Order.

Hi,
is it true that message type "NEU" doesn't require to fill
the smartform field in Processing Routines ?
Yours truly

If you are using the std form then you dont need smart form
std form is SAP script adn smartform is diff form then SAP script

Similar Messages

Output Message Determination for Purchase Order

Hi all !
Can anybody please explain in brief, the procedure for Ouyput message determination for Purchase order. (including printer settings)
I have tried it throgh the Standard Configuration guide. but i am not able to do.
Please explain step by step including form attachment.
Thanks in Advance !!!!

Hi,
Customization steps for Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Note1
Now Check in SPAD (Printer settings) settings & try to check the printer configuration. Check Device attributes, Access methods etc. are maintained in Spool Administration (SPAD) for the selected printer (your local Printer, may be ur using HP01or any but in SAP std is LP01) but consult with your basis consultant regarding above.
Check the following also:
Spool generated using SP01 or SP02.
Output device.
Local printer settings.
Paper Tray, Print Mode, Printer
Note2:
Check MN04 and NACE t.codes
Regards,
Biju K

Reg.Output type for purchase order

Dear Sir
I followed your steps but not come to "List of allowed output"
when I select the message for Purchase order(ME21N). There are listing NEU,SPO,MAHN and AUFB.
I just copy the NEU and all,I did not change anything.
Maintain Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Ex:
EF---> TES
Select TES and double click on Mail title and texts and go to
EN- New Purchase Order Print Out,
Select TES again and double click on Processing routines,
Select TES again and double click on Partner Roles
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO(ME21N) and save it. Go to ME22N and print the PO by giving output type TES.
Please help me sir
Rajj

Hi
Go to NACE
Select application as EF Purchase Order
Define TES as out put type there
Vishal...

Problem in using output type for purchase order

Hi experts,
I am using output type for first time so may be i have done wrong configuration for po output type.The steps i have done are :-
1) Going to tcode NACE->Selected the row u201CEF Purchase Orderu201D and clicked on u201CProcedures".
2) In procedures there are 2 procedures for the application EF (Purchase Order). To proceed further, we would need to find out the procedure that is currently active.Gone to transaction SPRO. In this, navigate as Materials management -> Purchasing ->Messages -> Output control -> Message Determination Schemas ->Define Message Schema for Purchase Order
3) Clicking on u201CAssign Schema to Purchase Orderu201D. So, the procedure RMBEF1 is active for EF (Purchase Order) .
4) Go back to transaction NACE. Select u2018EFu2019 and click on u201COutput typesu201D.
5) Let us use the output type u201CNEU name purchase orderu201D for this purpose. Double-click on NEU.
6) Ensured that the checkboxes u201CAccess to conditionsu201D and u201Cmultiple issuingu201D are checked and the access sequence is 0001(DocType/PurchOrg/Vendor).Only 0001 and 0002 is available in f4 help for this.
7) Now clicked on u201CProcessing Routinesu201D on the left hand side. Ensured that there is an entry for Medium u2018Au2019 (Distribution ALE).
8) After that going back to the main screen of NACE. Select EF (Purchase Order) and clicked on u201CCondition Recordsu201D.
Select NEU and clicked on u201CCondition recordsu201D. The pop-up box appears that gives three radio button option :-
1) Purchasing output determination :purchasing org / vendor for EDI
2) Purchasing output determination :doc. type / purchasing org /vendor
3) Purchasing output determination :document type
but it is not having option only for purchasing organisation through which we can send idoc for changes or creation of PO in that particular pur.org now if i choose 2) i have to give doc type and purchasing org both bcoz they are mandatory fields and value for vendor.
9) Also i have done the necessary ALE configuration (not covered in this document). In the partner profiles, use the message type u201CORDERSu201D and the IDOC type u201CORDERS05u201D.In the tab u201CMessage Controlu201D, used the process codes u201CME10u201D and u201CME11u201D for u201CPO Createu201D and u201CPO Changeu201D respectively.
but the idoc is not generated many times when po is changed and when once it is generated it is giving error
Please suggest solution.
Thanks in advance
nehavt

In me22n in messages tab after looking into processing log it is giving->No recipient found for message type ORDCHG in the
ALE model ,next time giving error as no idoc items belonging to purchasing document found,when i changed message type to ORDCHG the status is green in messages tab it is giving-> error occured while idoc xyz is sent and in WE02 status is red 02
error passing data to port(could not find code page for receiving system)

Define new document type for purchase order

Hello
I want to create a new document type for purchase ordre with also new number range.
And within my conditions, the shopping card will be generate either document type ECPO with number range 44 or document type ZOS with number range 33.
The document type is still a purchase order.
Is it possible to do that? To assign new document type for purcharse order?
If yes, is there any Badi to put my conditions of generation of my document type?
Thank you for your help.
Regards,
Peggy

Hi Markus
Thank you four your response. Unfortuntly, i do not want to create a new transaction type.
It is still a purchase order which could be visibled in standard transaction. The behaviour is still like standard PO, and could be visible in standard transaction PO.
I just want to create 2 types of purchases orders to identify them, so create a new number range and so a new document type for purchase order..
I have a condition to do "the shopping card will be created in this document type, and this schopping card will be created in this document type".
But standard document type is ECPO, and I don't really know if it is possible to create new document type for purchase order...
Peggy.

Changing a Message type on Purchase Order

Hi guys,
How can I change a standard message type on Purchase Order ?
For example :
On Purchase Order, when a insert a new Contract item number, occurs the Error message below :
'Contract vendor 610065 differs from vendor 610195'
But, I neet to change this message type from 'Error' to 'Warning' in some cases.
How can I do this, please ? I'm learning OO now and I have some difficulty yet..
tks
Flavio

I found a Method 'PROCESS_ITEM' in a Badi 'ME_PROCESS_PO_CUST' that the piece of code bellow. I tried to insert the code :
message e047(06) with '12345'.
but... the message 47 didn't change, and this message only was added to messages.
define mmpur_message.
    gl_tabix = sy-tabix.
    gl_subrc = sy-subrc.
    message id &2 type &1 number &3 with &4 &5 &6 &7 into gl_dummy.
    call method cl_message_mm=>create
      exporting
        im_msgid = &2
        im_msgty = &1
        im_msgno = &3
        im_msgv1 = sy-msgv1
        im_msgv2 = sy-msgv2
        im_msgv3 = sy-msgv3
        im_msgv4 = sy-msgv4
      exceptions
        failure = 01
        dialog   = 02.
    if sy-subrc = 1 or sy-subrc = 2.
      message id sy-msgid type sy-msgty number sy-msgno
              with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    sy-subrc = gl_subrc.
    sy-tabix = gl_tabix.
end-of-definition.

Message Output for purchase order

Dear SAP Expert,
We have defined the message output type for purchase order document type XX with special function. We have maintained condition record for the same. It is working fine.
Now we have defined another output type for another PO document type YYwith special function by copying earlier one.
But message output is not genarated in case of YY document type.
Please tell us what we have missed out.
Thanks & Regards,
Reva.

Hi Reva,
In ME22N for your PO, click on the Messages button. Then click on the blue information button - this should display the output determination analysis for the order, and will show you which output determination procedure was used, which output type and access sequence was processed and whether the system was able to find a matching record. At the lowest level of detail it will show you the keys that were used to read the condition records. All this information should help you to determine why a condition record could not be found for the purchase order.
Regards,
Monika

Condition Type for Purchase order

Dear All,
I have one query about condition type at item detail level in purchase order.
Please let me know how to disable any condition type for purchase order.
I have already tried it in, SPRO->Materials Management->Purchasing->Purchase Order->Define Screen Layout at Document Level.
But not found it there.
Regards,
Mahesh Wagh

Dear Ganti,
>OMF4 - Materials Management >Purchasing > Purchase Order Processing >Define screen layout at document level
1. No such T Code OMF4 found (I ma using ECC 6.0)
2. NO Such Customizing Menu path sound in SPRO.
Pls elaborate......
Regards,
Mahesh Wagh

Predefined object type for Purchase order release stratergy

dear experts,
There are already predefined object type for purchase order like bus2012 where i can create new events and methods. I want to know is there any predefined objects for purchase order release strategy. The requirement is there i want to define method, that should display the po release screen. If i bind this method with work flow template, mail should be triggered and if i click the mail po release screen should be opened for respective material...
regards,
Kandhan G

Hello
I'm using the BUS2012 Object type in workflow task but in simulation the task run correct but in the transaction when modify a purchase orden the task send an error...
maybe the error is similar...did you solve this problem?..
Thanks!
Wladimir E.
[email protected]

Define access sequence for purchase order

Hi,
Please can I get some advice on how to create an access sequence in MM (in IMG = define access sequence for purchase order)
I have created a condition type for handling costs and want to assign a default value for each individual goods supplier.
So for plant 1000 and goods supplier 40, assign a rate of 3% to the condition. For plant 1000 and goods supplier 50, assign a rate of 7% etc etc
How do I go about doing this please
Thank you

hi,
Steps,
Customizing activities:
1) Create the condition table for vendor and plant field.
table no should be above 500 as its a customizing.
2) create access sequence and assign the condition table to this access sequence.And activate the fields in table.
3) create Z condition type and put this access sequence into the condition type.
End user activities:
4) maitain the condition record based on vendor and plant in MEK1 transaction
regards,
sujit

Define Release Procedure for Purchase Orders

Hi Friends,
We are changing Release procedure for purchase orders for one department from > $ 5000 to > $ 10000.
We defined three characteristics for the class namely Purchasing Order Document, Purchasing Order Type and Ner Order Value which is Currency data type. I Defined Release Procedure for Purchase Orders in configuration master. It's working fine, I mean the Net order Value field is updated in Configuration Client.
After transporting the above change to the Testing Client, the Net Order Value field did not update in testing Client even though I created Characteristics in Testing Client (as characters are not transportable, I created them seperately in Testing Client). I can't update the Net Order Value manually in Testing Client as it says "Client 010 (test) has status 'not modifiable' "
Please tell me how to update that field, as the net order value didn't change even after transport. I can't change manually in testing Client as the status is "not modifiable"

Hi,
Yes I have already done that.
In SPRO,
After hitting the following:-
MM --> Purchasing --> Purchase Order --> Release Procedure for Purchase Orders --> Define Release procedre for Purchase Orders
I have to process the objects in the following sequence,
Release Group, Release Code, Release Indicator, Release Strategy & Workflow.
Upto Release Indicator it is fine. After hitting Release Strategy, I should select the release strategy (which I just created) and display. Then 4 buttons will be displayed namely,
Release Prerequisites, Release statuses, Classification, Release simulation.
Upto Release statuses it's fine. Afeter hitting Classification,
the values of Purchase document & Order type are populated, but the Total Net Order Value is Blank. It is supposed to populate the amount & 10,000. But it is not.
Actually that amount will be stored in the field GNETW of table CEKKO. But CEKKO is a Structure not a table. So I can't update the field.
Please advice me...
Thank You,
Nag

Custom Exchange Rate Type for Purchase Order

Hi
Our Financial Team doesn't want to change the Exchange Rates on a daily basis, but for place purchase orders with our overseas vendors we need the daily spot rate loaded in the system.
Is there way to configure a different exchange Rate type ? and use this Exchange Rate Type for Purchase Order to use instead of Default type "M"?
Thanks...

Found a soluntion ...
I have coded userexit EXIT_SAPLMEKO_001 component LMEKO001, to fill in Exchange Rate type in the Communication Structure "e_komk-kurst".
Update Exchange Rate Type "ZCUS" under SPRO and updated exchanges in TCURR table for this type. Then, everything else works like a charm.

IDOC Types for Purchase Orders, Vendor Master and Goods Receipt

Hello All,
Can any have idea about the IDOC Types that can be used for triggering when the actions creation/change/deletion on Purchase Orders or Vendor Master or Goods Receipt is performed?
Please let me know the names of IDOC Type, Process Codes, message type... and all the other required information...
Thanks in Advance,
Kumar.

Hello Ferry,
Thanks again for the IDOC Types. I have another question. Can we use those IDOC types for creating/changing/deletion of Purchase orders or Vendor Master or Goods Receipt happens? I mean can we configure in such a way that when ever there is a change or deletion of PO or VM or GR happens?
I have got to know about the IDOC PORDCH01 which can be used for Purchase Order. Can u suggest me which can be used for PO's?
Regards,
Phani.
Message was edited by:
Sivapuram Phani Kumar

Idoc message type for open orders & Open JIT lines

Hi,
I need to send Open Purchase Order data and Open JIT lines data to supplier daily via Idocs.
Is there any standard messege type available for this data.
Regards

Hi Rohita,
Instead of changing the standard domain, You have to make the changes in the User Exit.
Say Qualifier 001,002,003 were already there in the domain.
001--Purchase Date
002--Delivery Date
003--Ordered Date
In the user exit u have to just add the segment and the qualifier without making any changes to the Standard Domain.
These Qualifiers are just like other variables and u can add whatever values to them that u want..
You can add Qualifier 004 for Trnasportation Date or Goods issue date and have to communicate the MiddleWare informing that date with this Qualifier will be Transportation Date and they will do the mapping to the corresponding field in other syste.
You can have as many message types as u want for the same IDoc type. There is no harm in having multiple message type. And u dont need to change the standard domain. It can be done without changing the domain.
If u analyse the FM closely u will realise that they have done coding for those values in the domain.
So instead of adding it to domain u just have to do the coding for this new qualifier.
Revert back if u need any help on it.
Thanks...
Message was edited by:
Utsah Garg

Unable to debug output type for purchase order

HI all,
In purchase order (ME21N) , i have a custom output type (ZSND) that send po to the user. I try to debug the program when the output is called. I put breakpoint in the custom program for the output ZSND. However, It did not stop at the breakpoint.
Can anyone tell me how I can debug the program ?
thanks
Joyce

Hello,
Try this:
1. Put the break-point.
2. Go to the transaction me22n --> go to mesaage --> click in your output type message click on further data --> put in dispatch time 'Send with aplication own transaction'
3. Go to transaction ME9F put your document and message --> a list with the document will appears --> choose one and process it --> then it will stop in the break-point.
Hope this will solve your problem.
Best Regards

Define Message Types for Purchase Order.

Similar Messages

Maybe you are looking for