Define multiple Queue in SPAM Netweaver 7.0 ?

Hi Basis Exper,
Please advise how to add multple queue in SPAM so i can leave it running until all the Support Package imported without i have to do it one after the others manually.
because i need to do remotely, and there are 7 SP i have to import.
Thank You and Best Regards
Fernand

Hi Fernand,
I do this: First I am in spam and load each package, either from frontend or application server.
Then go into the box, labeled directory, go as display into "new support packages".
Spam will activly help you here. Pick one of the support packages and expand the tree structure to see prerequisites. Decide which makes sense to load at one time. (i always do basis by itself). So if you have several basis sp's ready pick the highest one. So, for example, highlight the highest basis package and then select the button "queue". It will show you the sp's that can be included. You can exit or use the suggested queue.
There is not a way to allow you to pick only the ones you want, but by playing around here you can get close. If you select a queue but decide you don't want it, then back to the main screen in spam, go into display/define and it will allow you to delete the queue.
When running the support packages you have a chance to change the start options. You can run the queue in a background job. This can be necessary if the dialog job might timeout. The problem is that you need to keep watch anyway because things will stop for SPDD or SPAU, and sit there waiting for you to refresh the screen.
Good luck.
Pat

Similar Messages

How to define a queue in SPAM?

how to define a queue in SPAM?
And also tell me the steps or procedure to apply support packs .

Hello kumar,
- Download the support packs from service.sap.com (provided you have a login ID) to the usr\sap\trans directory.
- Open a command prompt and change the directory to
NT: :\usr\sap\trans
UNIX: /usr/sap/trans
- Unpack the support packs using the following command:
NT: CAR -xvf :
.CAR
UNIX: CAR -xvf ///.CAR
This command unpacks the files that need to be imported into your SAP instance into the usr\sap\trans\eps\in directory.
- Log into client 000 as user DDIC
- Call transaction SPAM
- Once in transaction SPAM, go to menu option Support Package->Load Packages->From Application Server. It will ask you if you want to upload the files - click the green check mark on the box that appears to upload the files.
- Another screen will appear listing the files that you uploaded successfully - just click on the Back arrow to get back to the SPAM screen.
- On the SPAM screen, click on the Display/Define button.
- A box will appear with the Support Package categories (Basis, ABA, etc.)
- Click on the category for the support packages that you uploaded and it will list them in order.
- You can apply them individually or the whole list at one time.
- To apply individually, select the first one in the list and then hit the green check mark at the bottom left of the box. Then on the SPAM screen, go to menu Support Package->Import Queue.
- Confirm that you want to import the support package.
- Once it is done importing, you have to confirm the queue by clicking on the
Confirm Queue button - this will turn the yellow light in the Status area to green.
*Always check your logs after applying support packages by clicking on the Logs button in the SPAM screen.
Regards,
Raju.

How do I use same MDB for multiple Queues? Deployment ?

          Here is what I am trying to do
          I have written one MDB that I want to use for multiple queues. I have seen posting
          mentioning that code a new weblogic-ejb-jar.xml to define other queues as the
          solution.
          Is there any other work around?
          I want to add queues in future as and when needed. I don't want to modify the
          already deployed jar to replace it with new weblogic-ejb-jar.xml everytime I have
          to add another queue for the message-driven-bean. Is is possible to use some kind
          of reference tag and just put weblogic-ejb-jar.xml in a new jar file and deply
          that every time I have a new queue to use for this MDB ( I don't think so, but
          again ???).
          Any help would be greatly appreciated.
          Chris


Sorry -- that's the only solution for now.
          greg
          "Chris" <[email protected]> wrote in message
          news:[email protected]..
          >
          > Here is what I am trying to do
          >
          > I have written one MDB that I want to use for multiple queues. I have seen
          posting
          > mentioning that code a new weblogic-ejb-jar.xml to define other queues as
          the
          > solution.
          >
          > Is there any other work around?
          >
          > I want to add queues in future as and when needed. I don't want to modify
          the
          > already deployed jar to replace it with new weblogic-ejb-jar.xml everytime
          I have
          > to add another queue for the message-driven-bean. Is is possible to use
          some kind
          > of reference tag and just put weblogic-ejb-jar.xml in a new jar file and
          deply
          > that every time I have a new queue to use for this MDB ( I don't think so,
          but
          > again ???).
          >
          > Any help would be greatly appreciated.
          >
          > Chris

Multiple Queues(Content Specific) - Can't get more than two queues

Hi,
I have a ccBPM scenario, which collects messages read by the file adapter and then sends them grouped.
It's working fine in many different configurations, but I'd like to configure it in a way described in the PDF "How Tou2026 Configure Inbound Processing in ccBPM Part II: Queue Assignment", which is using Multiple queues - content specific.
If I put 2 queues (after defining a correlation for a message field batchID), it works fine. The messages with batchID=A are processed by one instance process from queue 001, and the messages with batchID=B are processed by another instance process from queue 002.
But if I put 4 queues (SWF_INB_CONF), all the message still keep going to just 2 queues, and not 4. There is no problem, because still the messages with batchID = X are all processed by the same instance process, but I want to add more parallelization to the process using 4 queues.
I've refreshed cache and reactivated, but it will still work with 2 queues and not 4. I've also made sure that the files read have 4 different batchIDs equally distributed among all the files.
I don't know what I'm missing...
Thanks!

Solved it with SAP help.
It seems that even if you config 4 queues (content-specific) to be used in SWF_INB_CONF, it is normal that not all queues allowed are used at runtime. The messages are distributed to the queues based on the correlation defined for the process, narrowing down the result afterwards to the number of allowed queues using a hash algorithm.
Often it is necessary to specify 50-100% more queues to load the actually intended number of queues with messages.
I could reach 4 queues really used setting the parameter to 10 queues.

Support package upgrade / SPAU with multiple queues

Hello, We are upgrading our support package level on our ECC 6.0 system. I divided up the support packages into 4 different queues:
SAP_BASIS
SAP_ABA
PI_BASIS
ST-PI
SAP_BW
SAP_AP
SAP-HR
After importing each queue, I had a few things to do in SPDD and SPAU. I created a new SPDD or SPAU transport request for each queue. My question is now what is the recommended procedure to handle these SPAU/SPDD transport requests when you have multiple queues? I plan to define the same queues when doing QA and PRD. Do I mark all of the requests and then when I do each queue, I only specify that particular request? Thank you in advance for your help.
Best regards,
Russ Cook

Hi Russ,
when did you export the different SPAU requests or didn't you export them at all?
If the export happens only after all queues are already imported, this final system state (component version + SP level) is stored in the requests.You are then not able to include e.g. the request for the SAP_BASIS SPs into the SAP_BASIS queue, because the other components are still on the old version, while according to the request they should be on the newer state.
So, the right procedure would be; import the SP queue, do the modification adjustment for this queue, mark the workbench request as modification adjustment transport request and export this request. Then you can import the next SP queue.
Best regards,
Dirk

Behaviour of multiple queue receivers on same queue

I have been trying to find out what exactly the jms specification states about having multiple queue receivers registered on the same queue. Some books and people say that one is only supposed to register one queue receiver per queue, if this is the case then one might as well use one topic subscriber per topic (what is the utiliy of a queue then).
I believe that one is allowed to register multiple queue receivers on a queue, and a message will only be consumed by exactly one and only one queue receiver, thus allowing for true parallel processing. This is the behaviour I have observed when using jms on both JBoss and Weblogic (and apparantly is the same on Websphere).
I have looked at the formal JMS spec from sun and they dont make it clear what the behaviour of multiple queue receivers on queue is. Can somebody PLEASE help me clear this up.

The behaviour is undefined by the spec. Here is what it says:
"Although it is possible to have two sessions with a QueueReceiver for the same queue, JMS does not define how messages are distributed between the QueueReceivers."
However, multiple receivers on a single queue is a very popular design pattern. A typically pattern is to use the queue as a worklist and for work items to be posted to the queue. There is then a collection of workers who are registered as queue receivers picking out their work items from the queue. These workers are processing in parallel and as the workload increases you respond by add more workers.
This pattern is usable where message ordering is not important and that the workers are stateless.
Steve

Multiple Queue Assignment for Integration Process - PI 7.11

Hi,
I am trying to configure multiple Queues for an Integration Process.
The Integration Process is straight forward, except for a Asynchronous Request Response pattern with correlation. (A asynch send step - immediately followed by a asynchronous receive step with Correlation)
I have done the following
1) In IR set the Queue as Multiple - Content Specific
2) In SWF_INB_CONF transaction reconfigured Multiple Queues - Content Specific without buffering
But when I trigger the message, the message is not at all triggering/entering the Integration Process. The error message is BPE Internal Failure.
But if I reconfigure the IP as One Configurable Queue & "Without Buffering", it is working. But we want multiple queues assigned to this Process.
Thanks in advance.
Regards,
Sudharshan N A

Bjoern, there are blogs/wikis available which should be searched before a question is asked on forum. The information you need is quite basic one and I will therefore lock this thread.
Regards,
Prateek

How to implement multiple queues in one circular buffer?

Spoiler (Highlight to read)
Recently I have successfully shared data of 2D array among different vis in a project, using circular buffer.
However, there is only one circular buffer allowed in one project for one data type.
I want different vis, running and getting data from circular buffer in different speed, all getting data as a queue from circular buffer. Like the circular buffer's read continuous mode.
The problem is that after a vi reads in continuous mode, the read data is deleted from the circular buffer. Then other vis can not use them any more and can not keep track where they should begin to read again.
So if it is possible that there are multiple pointers or queues in circular buffer to keep track the progress of different vis, and data only update when it gets input from DAQ but not deleted when read?

LawrenceChong wrote:
Spoiler (Highlight to read)
Recently I have successfully shared data of 2D array among different vis in a project, using circular buffer.
However, there is only one circular buffer allowed in one project for one data type.
I want different vis, running and getting data from circular buffer in different speed, all getting data as a queue from circular buffer. Like the circular buffer's read continuous mode.
The problem is that after a vi reads in continuous mode, the read data is deleted from the circular buffer. Then other vis can not use them any more and can not keep track where they should begin to read again.
So if it is possible that there are multiple pointers or queues in circular buffer to keep track the progress of different vis, and data only update when it gets input from DAQ but not deleted when read?
THe last time I wrote a multi-subscriber cirular buffer was in LV 6. Since then I have found that polymorphic queues perform much better so I now use multiple queues. One queue for each subscriber of the data. The subscribers are then responsible for maintaining their own histories.
So just use multiple queues.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Define Multiple Taxes with different Accounts

Dear Members
I have defined tax in Oracle R12 . and defined multiple rates. these all tax deducted in a single Tax account. but my requirement is, there should be multiple taxes with different acccounts. when I define multiple taxes the system gives error unable to Calculate the tax. when I only enable one tax it works.
Current sanario tax rates
2% Account # 666461
3% Account # 666461
3.5% Account # 666461
Required Sanario
2% Account # 666461
3% Account # 666462
3.5% Account # 666463
Should be different
Do you have any Idea How I configure it.

Hmmm, thought I did that but ran into issues...Will give it a harder look.
Thank you for your reply, tt2...BTW, I've been reading these forums for awhile now and your replies in other posts have helped me so thanks for all of them, too...

Http to Abap Proxy communication with multiple queues generation in Recevr

Dear SDNs,
I need some help in the following scenario, appreciate your suggestions and help .
I am receiving the messages from sender to PI on http posting, from PI I am sending the message to SAP system using receiver xi communication channel ( receiver is abap proxy).
Sender will send the messages in QOS=EOIO, QUEueID=XXXt_100 etc parameters, when large volumes cases, it is getting delayed to process it using a single queue.
We are thinking to dynamically generate multiple queues in PI and send the same queue ids to receiver SAP system to process all the messages quickly in SAP System also.
Help /Clarifications needed:
1. XI receiver communication channel in pi does not provide any options to generate dynamic queue id based on payload content (using dynamic configuration) and sent it to SAP.
2. Module Tab in receiver communication channel also got disabled to add custom adapter modules, can we add custome adapter module on xi receiver channel to generate dynamic queue id ?
Really appreciate your immediate help and suggestions.
Thanks.
Suraj.

Dear Praveen,
Thanks lot for the immediate reply, we need to use EOIO, as the messages need to be processed in the same order we send and receive, there is no flexibility in QOS=EOIO, Appreciate if there is any other thoughts?
Thanks In Advance.
Suraj.

Multiple queue vs single queue - peformance

Hi All,
Could pls throw some light on the following design.
Currenty, We have more than 100 queues and for each there is a different MDB to receive the message.Now, somehow we made a single instance of same MDB listen to all these queues by looking at the input message. The requiement now is, is it possible to club all the queues into single queue as it's asynchronous messaging. The receiver may also try write into the same queue at the end of message processing.If so, how would be performance. Is this performance better than having multiple queues?.
The message are expecting to be 25 k/day in the queue. And we are using Weblogic server.
Please let me know if you need more details.
Thanks
Srinath

You could try to use selectors to assign messages to particular MDBs. This way you off load some of the work on the broker but selectors by their nature usually have an impact on broker's performance. It all depends on your application, your expectations, size and the rate of your messages, how long it takes to process them on the client side. There is no simple answer in this case. You would have to test some scenarios to come up with a best solution that fits your requirements. Having said that I personally believe that some degree of partitioning of your queue could be beneficial. On a heavily loaded system it may increase the concurrency of the system and its resilience, particularly if you place the queues in different brokers. Try to imagine your broker as if it was a DB server with just one table (I'm not sure if this is the best analogy but I can't think about anything else at the moment).

How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?

How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?

If you want to use JMS with AQ as datastore then there is some configuration you need to do to enable this. This is outside SOA Suite per sa, e.g. no adapter required.
If you want to connect to the AQ direct then use the AQ adapter.
this blog may be of some help understand the configuration
http://biemond.blogspot.com/2008/01/oracle-jms-with-esb-and-bpel.html
cheers
James

Define multiple crop area's, same size with overlap

Is it possible to define multiple croparea's at once in CS3/CS4?
Is it possible to define them and move each crop area a certain amount?
I want to split a citymap into different page's (like an atlas) and export them separately as PDF or EPS.
Daniel Hoogendoorn
Cito-plan b.v.

Daniel,
You are not going to get Illustrator to replicate your FreeHand workflow. So far, every new function which Illustrator has borrowed from FreeHand since Adobe aquired it (including multiple pages) has fallen far short of FreeHand's treatment.
There still is no Lens feature in Illustrator. There still is no option to export just the selection (absolutely stupid).
Yet another unsatisfying workaround that might work for youi in CS3:
If you haven't already, in Document Setup, set the artboard to the size of the full map.
In the Print Dialog, General pane, set Media Size to the desired size for one portion of the map.
In the Print Dialog, Setup pane, set Tiling to Tile Full Pages. Click Done (not Print).
View>ShowPageTiling. Illustrator displays dotted lines indicating the numbered page tiles.You can get the utterly lame Page Tool (it's under the Hand tool), and click somewhere to set the page tiling origin where you want it (usually at the bottom left of the Artboard.
Save A Copy as PDF. Turn on the option for Create Multi-page PDF from Page Tiles.
The resulting PDF will have separate pages, with the map sliced up according to the Page Tiles. The artwork does not actually get sliced; objects which cross the bounds of a PageTile just get masked in the PDF.
JET

Defining Multiple operations for async calls in OSB

Hi,
I have three Asynchronous BPEL processes- BPELProcessA, BPELProcessB and BPELProcessC
I am trying to invoke BPELProcessB and BPELProcessC from BPELProcessA through an OSB Proxy service. I want to use a single proxy service to make calls to BPELProcessB and BPELProcessC from BPELProcessA . To do this I defined multiple operations in the wsdl of the proxy service. This is not working
But I am able to implement the following
1. If BPELProcessB and BPELProcessC are Synchronous, I am able to invoke BPELProcessB and BPELProcessC by defining multiple operations in the proxy service wsdl
2. I am able to invoke and receive response from 1 Asynchronous BPEL process by defining 1 operation in the proxy service wsdl. I followed the approach described at [http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/bpelpmtransport/transport.html#wp1111338]. Does this mean for each asynchronous BPEL, I need a separate pair of OSBs for each async process ( 1 for request and 1 for callback)?
Has anyone tried invoking multiple asynchronous processes by defining multiple operations in the wsdl?
Kindly request every to give inputs

Hi Eric
Below is the flow and error we are getting:
ProcessA is calling ProcessB and ProcessC through common OSB. In OSB we have created individual business services for ProcessB and ProcessC.I am using common Proxy service for calling these two Business Services using different operations.I have created one callback business service and Proxy service for ProcessA.
I am successfully able to call BPEL processes, ProcessB and ProcessC, but during callback client activity these two BPEL processes are failing with below error and ProcessA is going in waiting on receive activity state:
nested exception is:ORABPEL-00000
Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "ORABPEL-08010
Failed get operation definition.
Failed to get the WSDL operation definition of "onResult" in portType "{http://xmlns.oracle.com/AsyncBPELProcess}AsyncBPELProcessCallback".
Please verify that operation "onResult" is defined in portType "{http://xmlns.oracle.com/AsyncBPELProcess}AsyncBPELProcessCallback".
     at com.collaxa.cube.ws.wsdl.WSDLUtils.getOperation(WSDLUtils.java:216)
     at com.collaxa.cube.ws.wsdl.WSDLUtils.getOperation(WSDLUtils.java:208)
     at com.collaxa.cube.ws.wsdl.WSDLManager.isOneWayOperation(WSDLManager.java:517)
     at com.collaxa.cube.engine.core.BaseCubeProcess.getOperationType(BaseCubeProcess.java:735)
     at com.collaxa.cube.engine.delivery.DeliveryHandler.getOperationType(DeliveryHandler.java:778)
     at com.collaxa.cube.engine.delivery.DeliveryHandler.post(DeliveryHandler.java:71)
     at com.collaxa.cube.ws.WSIFInvocationHandler.invokeLocalService(WSIFInvocationHandler.java:1338)
     at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:287)
     at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:528)
     at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:248)
     at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:829)
     at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:412)
     at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:199)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3714)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1657)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:220)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:317)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5787)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1089)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:589)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:421)
     at sun.reflect.GeneratedMethodAccessor75.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:396)
     at com.evermind.server.ThreadState.runAs(ThreadState.java:695)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at CubeDeliveryBean_LocalProxy_4bin6i8.handleInvoke(Unknown Source)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:141)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:58)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:651)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:676)
     at java.lang.Thread.run(Thread.java:595)
Exception: ORABPEL-08010
Failed get operation definition.
Failed to get the WSDL operation definition of "onResult" in portType "{http://xmlns.oracle.com/AsyncBPELProcess}AsyncBPELProcessCallback".
Please verify that operation "onResult" is defined in portType "{http://xmlns.oracle.com/AsyncBPELProcess}AsyncBPELProcessCallback".
Handled As: com.collaxa.cube.CubeException

Multiple Queues in BPM

Hey,
    In case of multiple queues in BPM.
    say for instance multiple queues(random)
    When we check in SXI_MONITOR, in the QueueID column we get :
          XBPE_TaskId_No_QueueId.
Please can you tell me what is the significance of "No" in the above QueueId
normally its 1 or 2.
    can you also tell me how it affects the queue behavior.
regards,
       Milan

Prateek that is what i have done.
two files are picked from the file adapter they are merged and placed back on the ftp.
Now this scenario was working as expected when the no was 1. (i.e it went into sysfail, when both the files of the same instance entered different queues)
but in subsequent runs, when no was 2, it started working as i have explained. (i.e. it worked absolutely fine without getting into sysfail)
I have not done any changes in the configuration it happened automatically.
so i am not able to understand the phenomena.
regards,
    Milan

Define multiple Queue in SPAM Netweaver 7.0 ?

Similar Messages

Maybe you are looking for