Define own colors for charts in BW 3.0b, is it possible???

<u><i><b>Referes to BW 3.0b</b></i></u>
I have another short question concerning graphs.
Bex gives a fixed set of optional colors for charts, however I need some other colors in order to fit with the given style guide.
I know that it is possible to use a picture, however I am looking for a way in order to define my own colors for charts.
Anybody got an idea?
Greetings,

The problem is that I do not have a color column....
I can choose a color in the chart designer and I also get to the same option when using the wizard. <i>I am not sure if it is the right wizard as I have never used the wizard for chart editing before. How do you open the wizard to edit an already existing chart?</i>.
In all the menus I can't find any place where I could add RGB. I have my RGB code and everything, I just need to enter it somewhere, so no external tools needed.

Similar Messages

  • Define own colors for charts?

    I have another short question concerning graphs.
    Bex gives a fixed set of optional colors for charts, however I need some other colors in order to fit with the given style guide.
    I know that it is possible to use a picture, however I am looking for a way in order to define my own colors for charts.
    Anybody got an idea?
    Greetings,
    Nana

    The problem is that I do not have a color column....
    I can choose a color in the chart designer and I also get to the same option when using the wizard. <i>I am not sure if it is the right wizard as I have never used the wizard for chart editing before. How do you open the wizard to edit an already existing chart?</i>.
    In all the menus I can't find any place where I could add RGB. I have my RGB code and everything, I just need to enter it somewhere, so no external tools needed.

  • How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

    How to let the user define the colors for each plots in the graph (I
    use LabVIEW 7)?

    Hi,
    Take a look at this example, it uses property nodes to select tha
    active plot and then changes the color of that plot.
    If you want to make the number of plots dynamic you could use a for
    loop and an array of color boxes.
    I hope this helps.
    Regards,
    Juan Carlos
    N.I.
    Attachments:
    Changing_plot_color.vi ‏38 KB

  • How to define new colors for the form?(Finish)

    Hello! Everyone!
    I want to define new colors for the new form.
    But I don't find where I can define it.
    How to define new color for the form?
    Thanks in advance!

    You have to set the Canvas color or as I said earlier you need to use one of the available color schemas on the OAS or Builder runtime.
    If you want to use user defined colors in the builder, then you need to create a new color palette and use it.
    I personally haven't tried it, but there is a section in the online help that describes how to do this.
    Tony

  • Create class in custom.css to define one's own default colors for charts

    Hi All,
    I need to create a set of default colors for bar charts instead of the default ones. I dont want to change the colors in palette.xml file because there are other charts depending on the default colors. Is there a way I can create a new class that I can define in the Custom CSS class section. I am working on obiee 10g
    Thanks,
    Kavya

    To force automatic wrapping as a function of the coordinate x (as opposed to a ctrl-enter), I modified the WrapApp( ) as follows: i) added a keyListener to the JTextPane component:
          edit.addKeyListener(new java.awt.event.KeyAdapter() {
             public void keyPressed(java.awt.event.KeyEvent evt) {
                editKeyPressed(evt);
          });and, added the following listener:
       private void editKeyPressed(KeyEvent evt) {
          try {
             int dot = edit.getCaret().getDot();
             Rectangle cc = edit.modelToView(dot);
             System.out.println("CTP: " + dot + ", (x, y): (" + cc.x + ", " + cc.y + ")");
             if (evt.getKeyCode() == 8) {
                return;
             if (cc.x > 100) {
                insertLineBreak(); // as shown in the reference provided earlier
          } catch (BadLocationException ex) {
       }The behavior is fine as it automatically wraps and it outputs:
    CTP: 0, (x, y): (3, 3)
    CTP: 1, (x, y): (10, 3)
    CTP: 2, (x, y): (17, 3)...
    However, if I add change the component orientation edit.applyComponentOrientation(ComponentOrientation.RIGHT_TO_LEFT), the x-coordinate is shot to its positive limit and all printed characters are no longer visible! The output now is:
    CTP: 0, (x, y): (32770, 3)
    CTP: 2, (x, y): (32763, 3)
    CTP: 4, (x, y): (32756, 3)...
    Any idea how to fix that the x-coordinate is within limits (e.g., it should be bounded by the size of the editor pane)?
    Thank you.
    -mmm

  • How to define specific color for specific data in WebI?

    Hi everybody,
    I wonder how I could connect data shown in e.g. a vertical stacked bar chart to a specific color. The assignment of color in a chart is done by Webi automatically after pulling a a variable to a chart. Later on it is possible to change to color via the color palette. But how can I define a specific color for specific values of an attribute? (E.g. calue is Chicago -> color is blue; value is NY -> color is red.. etc ) Is it possible?
    Does anybody know the trick?
    Thanks in advance!

    Please refer the below links along similar lines .
    [http://www.dagira.com/2007/07/22/alerters-on-charts/]
    [http://www.dagira.com/2007/07/31/alerters-on-charts-part-ii/]
    Regards,
    Bilahari M

  • Fixing legend color for charts

    Is it possible to fix legend color in charts ? For e.g. I want
    lengend A to have "COLOR1"
    legend B to have "color2" etc
    It looks like CR chooses color in random order. I need to fix the color displayed for consistency. Please help me.
    Pradeep

    Hi
    - use condition for defining colors in your chart.
    - Create a mock legend using text boxes.
    Hope this helps!!!
    Regards
    Sourashree

  • CSM: Define own variables for use with FlexConfig policies

    Hello everyone,
    I'm currently evaluating CSM and I was wondering if it's somehow possible to create variables that can be set per device.
    Example: A variable set to the name or location of a customer that could be used inside a FlexConfig policy to create a banner message.
    Regards
    Lukas

    The problem is that I do not have a color column....
    I can choose a color in the chart designer and I also get to the same option when using the wizard. <i>I am not sure if it is the right wizard as I have never used the wizard for chart editing before. How do you open the wizard to edit an already existing chart?</i>.
    In all the menus I can't find any place where I could add RGB. I have my RGB code and everything, I just need to enter it somewhere, so no external tools needed.

  • SP2010: Different colors for chart bars in Chart Web part with single data series?

    Hello,
    I've been asked to create a chart for visual display and summary of Status values within a SharePoint list of job positions. The list of positions includes a Status field with the only values being Open and Closed. I created a page that shows the list, and
    at the top I inserted a Chart Web part that displays two bars - one showing the number of Open positions and one showing the Closed positions. Because I was having difficulty getting the totals for each Status value to show up in the chart, I followed
    the instructions at
    http://highbrowse.wordpress.com/2012/07/04/chart-counts-from-sharepoint-lists/ and pointed my chart at the new "Status values" list - this worked well to display the sum counts for each of the two Status values in separate bars.
    This was all fine and good, except that because I am only using one data series for my chart, both of the bars (for Open and Closed) show up as the same color. I've been asked to make them different colors but cannot figure out how to do so. Can someone
    provide guidance on how I could make the two bars different colors? Thank you so much.
    cheers

    Hello,
    as far as I know, the chart web part does not have any settings to change the color of individual data points or plot data points of a series in different colors. If you only have two values in the series, you could use a pie chart instead of the column
    or bar chart. In a pie chart, the different slices have different colors.
    cheers, teylyn

  • How to Define own namespace for WebDynpro

    Hi all,
    I want to create a new WebDynpro Project in an own namespace. But during the creation process in NetWeaver Developer Studio I'm not asked for a namespace. I also didn't found any property here to configure the namespace.
    The result is that all WebDynpro projects refer to namespace "local".
    How can I configure the namespace of new WebDynpro projects?
    regards
    René

    Namespace is configured in your http://<hostname>:<port>/sld
    It is quite an elaborate process and I request you to go to
    http://service.sap.com/netweaver
    On the left hand side, check for Netweaver 04. Look in the How-to guides of NW04 for WAS. They have neatly explained the process for setting up your track, development configuration, namespace and how to import this development configuration in your NWDS.
    You may also refer to this help section :
    http://help.sap.com/saphelp_nw04/helpdata/en/38/33eb9c3e1fe2409a9eba8246b933ca/frameset.htm
    Regards,
    Subramanian V.

  • IMP: How to define own methods for pow(), sqrt() etc?

    HI ALL!
    We designed midlet to run on a mobile phone. We have some additional trignometrical classes to integerate with the midlet. But we got astonished when we didn't find any trignometrical function in MIDP1.0 & CLDC1.0. It is now is a great panic for us.
    It is very unbelievable that Sun Microsystem doesn't provide such classes with J2ME!!
    Is there any way to define or get a free-ware trignometrical classes to use?
    We hope urgent reply from this Forum.

    Google can do wonders for questions like this: http://www.ganssle.com/approx.htm

  • Setting custom color for selected node in JTree?

    Hi,
    i want to set my own color for selected node in JTree. i don't want to set for all the nodes...how to set Color for Selected node using TreeCellRender class?
    Thanks
    Mani

    I assume you are not setting a custom tree cell renderer...
    javax.swing.JTree theTree = ...;
    java.awt.Color newBGColor = ...;
    ((javax.swing.tree.DefaultTreeCellRenderer)theTree.getCellRenderer())
        .setBackgroundSelectionColor(newColor);

  • Setting the font style and color for FileChooser labels

    Hi Friends,
    I have a certain standard Font style and color set for my application GUI. Now, I want to set the style and color for Swing components like FileChooser. Is it possible ?
    Also is it possible to localize JOptionPane ?
    Please advise.
    Best regards,
    Harilal.

    Does anybody knows how to do that?

  • Recording your own commands for the Voice Over Utility

    To Record your own commands for the Voice Over Utility?
    Is this possible?
    How?
    thanks

    If you simply want to change the command used, or add an extra command that does the same thing, you just need to know that the file names are used as the name of the commands for Speakable Items.
    If you open system preferences, the speech pane, select "Speech Recognition" at the top and then "Commands" on the next line there's a button there - it's labeled "Open Speakable Items Folder". Click on that and it shows you a folder containing all the global commands. If you want to change one of these, you can edit the file name. It's probably safer if you duplicate the file ("duplicate" from the context menu) and then change the name of the copy, so the original is still there in case of mishaps! I'm not sure if a comma in the file name would work but I suspect it wouldn't - none of the commands there have commas in them.
    If you want to change a command in a specific application then open the "Application Speakable Items" folder and explore from there.
    Another thing which might help is to go back to System Preferences and click on the "Global Speakable Items" in the command set list and then click the "Configure" button. There's an option there which will make more variations on the commands work.
    The most complicated way is to write your own new speakable items. This gives you the most flexibility but also you need to learn some AppleScript to enable you to do it. If you want to learn AppleScript, check out the AppleScript resources - it does lots more than just speakable commands and the general resources should help you most.
    Best of luck!
    Ricky

  • Defning own color palette for Chart Items

    Hello,
    i have a requirement for several Cockpits, the values of all diagramms of actual year should have a special color, which is not defined in the color palettes Tradeshow, Streamline or Enjoy.
    I don't want to change the color for each chart, i'v already tried the Portal Theme Editor, but i was not able to change color settings for charts.
    Is it possible to create custom color palette which i can choose in the global settings in the chart item dialog?
    Best regards,
    Frank

    1. Go to the following directory on the server side Installation Directory \SAP BusinessObjects Enterprise XI 4.0\images
    2. Find the file there named as VisualizationConfig.template.xml
    3. Rename this file to VisualizationConfig.xml
    4. Then edit this file and add the color for the palette as you required (RGB colors are used)
    5. Check there are no errors in the config file, otherwise the standard palette is applied – you can define only one Corporate palette, and the palette ID must not be changed
    6. Finally, you need to reboot Tomcat after editing the config file.

Maybe you are looking for