Define PO Number Range for XYZ plant

HI,
I want to create the Number Range for PO.
Scenerio: -
I m working in ABC Plant and we define the number ranges for PO i.e starts with 4500000000 series.
But now we have 2nd plant XYZ. So we want to create new runmber range for that (should be start 5500000000).
Plz let me know, how can i define new number ranges for XYZ plant.
Regards

Dear Friend,
with respect to plant PO document type restriction not possible, so in this case copy the NB document type define the new document type
SPRO>>MM>>Purchasing>>Purchase order>>Define the no ranges and assign the no range to document type
SPRO>>MM>>Purchasing>>Purchase order>>Define the Document type here you assign that no .range to your document type
Regards
Pramod

Similar Messages

Define a number range for settlement documents

Hello,
We are getting below error while doing T-code AIBU asset settlement.
Define a number range for settlement documents
Message no. KD 522
Diagnosis
No number range for settlement documents defined in controlling area ACA2.
The settlement document is a document type in its own right, which is used for cancelling settlements and repeating month-end closes.
Procedure
Define a number range for settlement documents. Choose Maintain number ranges for settlement documents.
Thanks,
Ratnam

Hi......
Try to use the following T.code : SNUM,
1. Group -> Maintain and Group -> Insert
2. Give your number range a description.
3. Specify one interval for the number range. If you use up this range, you can add more intervals.
4. Select one or more of the controlling areas listed in the block "Not assigned".
5. Place the cursor on the number range to which you want to assign the selected controlling areas.
6. Use Assign element group to assign the controlling area(s) to the appropriate number range and save your entries.
Note that all intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
Dependent tables are not transported or converted. Note that the appropriate application table is also transported for number range objects used for group maintenance.
And use :OKG6
I hope you will get some idea.
Regards
vamsi

Number range for Batch - urgent help

Dear Champs,
We need to have internal number range for batches for one plant and external number range for other plant. How & Where to assign number range for plants ?
Kindly suggest
Thanks
Rajesh

Mr Rajesh
You can maintain num range internal and external independently with out any customization or development if you run batch management PLANT level.
Where plant level batch mgmt., the batch number is only known in the plant in which it was created if the stock is transferred to another plant, the batch is unknown in the recipient plant and the system does not adopt any data
And you can define independent number range for each plant.
If planned at client level need to customize using the userexits avaliable.
Message was edited by:
Pavan Kodali

Define Number Ranges for Maintenance Plans

Dear Friend's,
At present Maint.plan category PM (Maint order) is not assigned to Group (Maint Plan Number)
Here i have to define Internal Number Range for Maint.Plan
How i can assign.Pls guide me step by step.
Thanks in Advance.
Regard's
Sandeep Theurkar

hi
Either you can use the existing number by assigning your category to the available group or create your own group and assign the plan category in T code IP20
in IP20 select the group in change mode ,select your PM category and tick mark the available group and press the element/group button
or from the menu Group>Insert maintian your own and assign your category
regards
thyagarajan

Problem--Define number range for cProjects projects

Hi,
Does anybody knows how to define/create number range for projects in cProjects?.
In the standard cPrjects frontend system, the system is taking 16 digits number automatically so i want to define my own number range as required by the client.
Hence please let me know if some knows abt how to define number ranges for projects in cProjects system.
You can also reach me on [email protected]
Thanking you,
Cheers,
Suresh Nagaraja

Hi Suresh,
don't think there is a standard functionality for this. But you could create your own number range object and fill the data via BAdi. Try DPR_ATTRIBUTES.
Cheers
Thorsten

Number Range for Returnable Gate Pass.

Dear All,
We Issue an Returnable Gate Pass with Material .
These RGP has common series for all the plants.
For example, in 1200 plant we have issued RGP with series number 4900003295 dated 21.07.08 and in 1400 plant we have issued RGP srl no. 4900003235 dated 03.07.08. The system is generating the number from one Number series only.
This is serious problem.
My Client wants to get the different Number Range for RGP issued from Different Plants.
Points will be awarded .
Please reply.
AV

Hello,
Please note that Number Range is at Client Level hence you cannot have different number range for different plants. Th same is not possible in SAP.
However there is a workaround, in MIGO we have GR/IR field. In this field we can go in for automatic number range based on Plant. By doing this you can explain you client that though the Material Document number range will remain the same but still by looking at the GR/IR number you can easily differentiate as to which Plant.
You can define the same in Materials Management>Inventory Management and Physical Inventory > Number Assignment > Define Number Assignment for Goods Receipt/Issue Slips
Regards

Number Ranges for the Serial Number Profiles

Hi All,
We wanted to trace the Goods movement based on the serial numbers. we could make this possible by attaching the serial number profile with relevant procedure (Stock Chk) to the Material.
Now the issue left out is of Number range and the pop-up for the existing serial numbers for the material. Is it possible to define Number Ranges (Ext. / Int) to the Serial Number profile ? Also, to get a pop-up for the serail numbers of material currently in Stock, which can be issued. Currently, I have to get the detail of sr. No. thru' IQ09 / IQ03.
Pls advise.
Shekhar.

Hi,
Yes. In IMG under Plant maintenance -- > Technical objects -->Serial No profile.
Here you can create diff profile with difff procedures.
And mention the properties of each.
There is a material master record for each type in the system. For control purposes, the company wants to know which customer received which collector type, and which serial number(s) of the collector type were supplied to the customer, when the individual solar collectors were delivered.
It is therefore necessary to assign a serial number to the customer delivery in addition to the material number.
A serial number master record is created with the assignment of the serial number. You can maintain data fields specific to the serial number in the master record.
At a later date, it may be necessary to enter equipment master records for materials that have already been serialized and delivered to customers, for example, if the producer of the solar collectors also has to perform maintenance activities for the customers and therefore wants to use all the functions available in the equipment master record for a serialized material.
In order to keep this option open at any time, you must define a number range for serial numbers. The numbers assigned from this number range are not the serial numbers but reserved keys that stand for the combination of material number and serial number and the equipment number that may possibly be assigned.
You can also define one or more serial number profiles.
The serial number profile defines how and under which conditions a serial number is assigned for a material.
Note
A material can only be assigned serial numbers after the required serial number profile has been entered in the material master for a specific plant.

Different number ranges for same order type

Hi PP Guru's ,
Can anyone send me the user exit for the differnet number range creation for the same order type.
Same order type is used in two different Plants. So our client want to track the production order plantwise.
Thanx in advance.
Regards,
Nagraj

Hi Nagaraj,
The number range is defined at order type level ( i.e. client level)
So if you want to use different number range for different plant, then use different order type for different plants.
Thanks and regards
Murugesan

Error: Number range for object RESB does not exist

Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
     Message no. 61501
Diagnosis
     The system cannot create a document for an MRP element if no number
     range or interval has been maintained in Customizing of MRP or if t
     number range you have maintained is not allowed.
     Below is a list of MRP elements that are affected:
     Number range object MRP element
     PLAF                 planned order (operative oder simulative)
     EBAN                 purchase requisition
     RESB                 dependent requirements
     MDSM                 simulative dependent reqmts (long-term plannin
     MDTB                 MRP list
Procedure
     Check the number ranges in Customizing. If you do not have the necessa
     authorization, please get in touch with your systems administration.

Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object                             MRES/DREQ
No.                          From Number            To Number          Curr Number          Ext
01                           0000000001               8999999999           380                    blank
02                           9000000000               9500000000           blank                  checked
RB                          9500000001               9999999999           blank                  checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

Number ranges for Business Partner

Hello experts,
Can you please guide how to define different number ranges for differenet different parner functions such Bidder and Employee.
Presently when I create a new employee for a Business partner who has newly registered with SRM, they both are getting same range of BP number, which makes the user list very long to manage/search while creating BID/Auction invitation.
Please guide me. Thanks in advance
Vijay

Hello,
find below the settings of table T77S0 in our system. We use grouping Z4 for org units. Be aware of the fact that number range and grouping have to have the same ID in this case.
Regards
Wolfgang
GRPID SEMID GSVAL      ETEXT
HRALX HRAC X          Activate HR Integration
HRALX MERID X          Enter Integration Error in IDOC
HRALX MSGRE 0          Recipient of Error Message When Creating BP
HRALX OADBP            Business Partner of Standard Address
HRALX OADRE            Address Necessary for Business Partner?
HRALX OBPON ON         Integration O-BP Activated
HRALX OBWIG X          Ignore Business Partner Warnings
HRALX ONUMB 2          Business Partner Number Assignment (Org. Unit)
HRALX OPROL BUP004
HRALX OSUBG Z4         Business Partner Subgroup (Organizational Unit)
HRALX PALEO            Log: Organizational Units in ALE
HRALX PALEP            Log: Employees in ALE
HRALX PBPHR OFF        Employees Are Replicated from HR System
HRALX PBPON ON
HRALX PCATS            Integration P-BP for CATS Activated
HRALX PINAC            Activate ALE Distribution of Inactive Employees
HRALX PLEVE 3          Log: Detail Level of Error Messages (1 - 5)
HRALX PNUMB 3          Business Partner Number Assignment (Employee)
HRALX PPROL BUP003
HRALX PQUAL            Import Qualifications
HRALX PRTON            Log Active
HRALX PSUBG            Business Partner Subgroup (Employees)
HRALX PSYNO            Log: Organizational Units in Dialog
HRALX PSYNP            Log: Employees in Dialog
HRALX USRAC X          Create Relationship to User

Multiple number range for planned order

Hi,
I want maintain different number range for MRP related planned order and manual creation planned orders. I have checked OPPQ and OMI2 transaction but i could not get any clue to create different number range for same plant. Let me know is how we can create.
Regards / US

Hi Uma,
number range is dependent on plant alone and I don't think there is an user exit or badi to change number range at planned order creation.
I guess the alternative is an enhancement or using some other field to determine what planned orders are manual.
regards,
Edgar

Number ranges for order types

Hi
I want to differenciate numbering of rework order type from the standard order type.Assign different number ranges to different order type.
Shankar

Hi Mr.Shankar,
Please try out this,
<b>1.In OPJH - Define Order type,As u said you are copying from PP01 type,after copying change the name of the order type say for Eg for Rework ucan chage it as RW01 and save it.Again carryout the same step to create 2 more order types say TT02 and TT03.
2.In OPL8 - Define Order type dependent parameters,Enter the settings for the newly created order types for RW01,TT02,TT03 and save it.
3.In CO82,Define the number ranges for individual order types as explained by our friend ,If you want external number assignment then Include a tick mark against the check box for an order type save it.</b>
While using CO82,after going into the exact screen,in the top goto Group-Maintain groups (or else Press F6)and in the bottom of that page you will be able to see the newly created order types (which you have created) and now you can select the types and assign the number ranges in a different way for different order types.
I hope now the system allows you to assign number ranges as per you need.
If useful please reward your points
Thansk & Regards
Karthik
Message was edited by:
Karthikraj
Message was edited by:
Karthikraj

Year wise Number Ranges for Sales Documents

Hi,
Can any body tell me how to reset number ranges of SD Documents when fiscal year chane.
Thanks

Hi Kapildev,
   In standard functionality this function is not there you need to look forward for user exit.
   Check this:
   User exits in the program MV45AFZZ
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment
depending on the required fields. For example, if you want to define the number range
depending on the sales organization (VKORG) or on the selling company (VKBUR), use
this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
Thanks,
Swamy H P

Number ranges for purchase order in SUS- why?

Dear Gurus,
In SPRO settings, I have seen the option for defining the number range for purchase order in supplier self service system. similarly, there is an option for defining the number range for purchase order response.
Why do we need to define the number range for purchase order and its response in SUS system? In SUS system, the purchasing documents from SRM and MM system create corresponding Sales Order and its follow-on document. So, we need to define the number range for sales order not purchase order.
In spro documents, it says you need to define the number range only if you create purchase order locally in SUS.
What does it mean?
regards,
Ranjan

Hi Ranjan,
Unfortunately in SUS, Sales orders are referred to as Purchase orders only. Hence any PO with a number say 450000000 that comes into SUS will have a corresponding number in SUS as 19000000.
Sam has already explained the PO response part.
Regards,
Nikhil

Number range for trans./event type WA in your 2011 does not exist

Hi,
I am getting this error while creating stock
number range for trans./event type WA in your 2011 does not exist... already checked with tcode OMBT, OMBA, and also serach column there also nobody has given proper details.. can anyone help me for this

Are you practicing on IDES server?
Anyways, the Number Ranges for your FI document WA is missing for Year 2011.
Follow this:
IMG - Financial Accounting (New) -Financial Accounting Global Settings (New) - Document - Document Types - Define Document Types for Entry View
Here check the Document Type WA, note the number Range assigned.
Now go to
IMG - Financial Accounting (New) -Financial Accounting Global Settings (New) - Document - Document Types - Document Number Ranges - Documents in Entry View - Define Document Number Ranges for Entry View
Here create Number Range for Year 2011 for your Company Code.
Then assign the Number Range Key to to the WA Document Type Above.
You can also Copy the Existing Number in Document Type to Year 2011 in Copy to Fiscal Year IMG link.
Also request you to close your previous threads (questions) on time.
Hope this helps,
Thanks,
Jignesh Mehta

Define PO Number Range for XYZ plant

Similar Messages

Maybe you are looking for