Define queue error

I was applying sapkh60010 patch as it had taken more time so i had deleted the queue through force mode with se37 ocs_reset_queue. now the queue is empty but i am unable to define the queue . i am getting the message " transaction SPAM is locked by DDIC" . i did a mistake , i may loose my job can any one plz help me
regards

Hello Ali,
First of all you will not loose your job for such a thing.
Please check transaction SM12 in client 000 for uder DDIC. If you see any locks there please delete them.
<regards.
Ruchit.

Similar Messages

  • Inbound queue error

    Hi Gurus,
    I am facing a problem with inbound RFC Queue,error message is logical system not defined in table smof_erpsh.
    i hav e cheked the table but not too sure about how to activate the queue.
    please help.
    Regards,
    Samarjit

    Sounds like you switched backends on the CRM system.  You can only have one ERP backend connected to a CRM system, in a normal typical landscape without special customizing.
    You may also had a system that was copied from the original backend that is now trying to send bdocs to your crm system.  Can you tell us a little more about your system landscape and we can then see what needs to be done?

  • QRFC Outbound queue errors

    Hi All,
    I have some "qRFC Outbound queue errors" in the production system of R/3 and the target system is CRM.
    The status is "SYSFAIL " .
    Can anybody tell me how to solve them.
    Regards,
    Anindya

    HI Anindya,
    It's a very simple error. You have to check with your Security System Administrator if the user has included in your profile the authorization object S_RFCACL. Before this you have to define RFC Trusted / Trusting Systems in your Landscape.
    Reward Points if helpful
    Cheers
    Manohar

  • How can we define custom error page in protal application

    How can we define custom error page in protal application, like we define "jsp Error page " in JSPs

    Hi,
    Check these:
    Customization of Portal Runtime Errors and portal standard error codes
    http://help.sap.com/saphelp_nw04/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ec/1273b2c413b2449e554eb7b910bce7/frameset.htm
    Regards,
    Praveen Gudapati

  • Inbound queue error"XI Error APPLICATION_ERROR.ABAP: Queue stopped"

    Hi,
    In  SMQ2 ,we have received inbound queue error "XI Error APPLICATION_ERROR.ABAP: Queue stopped".When activate queue error is not going.So please advice.
    Thanks,
    Praveen

    Hello Mr,
    Have a look into SAP Notes: 824554, 906435, 783515, 910649, 706563.
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    To be more helpful, can you post here complete error log?

  • 'User defined exception error in package OE_SCHEDULE_UTIL' in Sales Order

    Dear Contributors,
    I am getting the following error while trying to enter line items in the Sales order form. Please provide your valuable suggestion on how to fix this...
    User defined exception error in package OE_SCHEDULE_UTIL Procedure Insert_Into_Mtl_Sales_Orders

    1004661 wrote:
    Dear Contributors,
    I am getting the following error while trying to enter line items in the Sales order form. Please provide your valuable suggestion on how to fix this...
    User defined exception error in package OE_SCHEDULE_UTIL Procedure Insert_Into_Mtl_Sales_Orders
    Please see (ORA-01006 bind variable does not exist FND_FLEX_SERVER during OM Activity [ID 1067359.1]).
    Thanks,
    Hussein

  • Alert Monitoring - ID failures and Queue errors

    Hi,
    In our project we need to trigger alerts for cases apart from Mapping Errors, Application Errors and Adapter Erors like the cases mentioned below :
    1. A Message gets stuck in the QUEUE of ECC system
    2. The ID has errors like the Receiver Determination has errors.
    How can we trigger the Alerts and see them in Our Alert Inbox .
    Regards,
    Arunava

    Hi ,
    For runtime errors , you can trigger an alert.
    I don't think so, it is possible to trigger an alert when message is stuck in Queue, but if you get any error either system error or application error then you can trigger an alert.
    For more-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    If you have got any errors like communication errors because of Queue error, then you can think of configuring CCMS alerts.(i.e alerts for Components)
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    Regards,
    moorthy

  • HT3669 My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error"  However, it will print if I directly connect my laptop to this printer via the USB connection.  Any ideas?

    My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error"  However, it will print if I directly connect my laptop to this printer via the USB connection.  Any ideas?

    It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.

  • The windows Cryptographic service provider an error: the keyset is not defined. Error code: 2148073497

    I am using Windows 7, 64 bit,  Adobe 8.1 Professional, ActivClient Agent, with CAC card
    Trying to sign a document digitally however  I keep getting :  The windows Cryptographic service provider an error: the keyset is not defined. Error code: 2148073497
    -I have  tried by deleting my certificates off the computer and reinstalling, this did not help.
    -I have tried rebooting the computer, this did not help.
    -I google the error message and can't locate any step by step instructions to fix this problem.
    Could use some assistance. Please do not assume I'm top of line knowledgeable in Adobe when giving me a fix. That is the reason I am looking for step by step instructions. Thanks.
    Navy Chief

    Hi Chief Mendenhall,
    It's really a Microsoft error, not a Acrobat error, but I know that doesn't make the inability to sign any less frustrating.  This probably has something to do with the communication bridge between Acrobat, Windows, and the CAC software. I know you're not responsible for software upgrades, but is there any chance you can download the free Adobe Reader (Adobe Reader Install for all versions). Even though Reader doesn't have the same editing capability as Acrobat Pro, it will allow you to sign a PDF file, and what I'm looking to see is if this is somehow related to the age of version 8.1, which is well past its end-of life. Even version 9 in longer supported.
    Thanks,
    Steve

  • EVENT 36888, Schannel A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252.

    I keep losing my network connection for a few seconds at a time.  Not  a big deal unless I just spent time filling in a form and have to redo it.
    Getting:
    A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252. Using windows 8.  I just installed the new ARRIS
    TG862 provided by Comcast. 
    Any Ideas?
    Also get the following errors in my events:
    The name "WORKGROUP      :1d" could not be registered on the interface with IP address 10.0.0.2. The computer with the IP address 10.0.0.3 did not allow the name to be claimed by this computer.
    Realtek PCIe GBE Family Controller is disconnected from network.
    Any help is appreciated

    Hi,
    Critical Kernel-power event ID 41 is used appear after PC restarts or randomly restarts with error
    BugcheckCode listed or a cold reboot. Do you get BSOD and some dump files?
     Default location is %SystemRoot%\Minidump. You can upload it to skydrive, then paste link here.
    How to use Skydrive
    http://www.wikihow.com/Use-SkyDrive
    Kernel-PnP event ID 219: A Plug and Play device driver on your system is failing to load due to a device driver or device malfunction, you can unplug any external devices (except mouse and keyboard, but please keep the latest drivers), and
    check device status in device manager, please also keep the all latest driver update of your PC.
    And for error 36888, I found a similar thread, please refer to this link
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/4c5430f5-43f6-41b4-97d3-03cfb3efa70b/schannel-error-event-id-36888-is-there-a-way-to-identify-what-causes-schannel-to-log-error?forum=winserverDS
    Regards
    Yolanda
    TechNet Community Support

  • BDC_CLOSE_GROUP, queue error at

    I want to record the transaction MM01, i am on sap4.0 B, the moment i do the recording and click save , it shows a dialog box saying get transaction, then i click on yes, at that moment it throws an error
    BDC_CLOSE_GROUP, queue error at . Please check the system log
    Can anyone help, is this is a authorization error....???
    Or how should i remove this....?
    <b>Points will be rewarded</b>

    Runal,
    Might be you have opend multiple BDC groups and have not closed them properly.
    Regards,
    Sujatha

  • Defining Queues

    my scenario (File to IDOC).
    The File details comes from a legacy system and it contains the Material Master data. We have a Flag in that material Masta , if that Flag is U then it is URGENT , if the Flag is N not urgent and if the flag is W it is weekly.
    As a first step we are splitting file into 3 one for Urgent and named as UMmaster , Not Urgent file as NUMaster and weekly file as WUm.
    IN our scenario we have 3 File adapters for the above situation. The first adapter which polls every 1 hour and it will look for UMmaster file, the second adapter will poll for every 24 hours for NUmaster and the third file adapter will poll for every 7 days for weekly file WUM.
    All the above adapters are defined in one single scenario. Now for the Urgent files we want to allocate the High Priority Queues and for the remaining two files we have to allocate the Medium Priority queues.
    How to do that? Thanks

    Hi Jenni ,
    These r the details Queues Prioritization:
    Queues for Prioritized Message Processing
    http://help.sap.com/saphelp_nw04/helpdata/en/04/827440c36ed562e10000000a155106/content.htm
    Queue prioritization for XI processing queues uses a built in feature of qRFC. By specifying the maximum processing time for a queue, u can define how much processing time a specific queue will get(this works like a time-scheduling procedure, time slicing). U can use this feature to add queues for high-priority and low-priority messages(for inbound and outbound processing). These queues are then named, for example XBT1* or XBT9* for inbound EO processing and XBTA, XBTZ for outbound EO processing.
    This function uses the message filter concept and can be configured in transaction SXMB_ADM. U can define message filters for specific message attributes such as sender/reciever service, interface and so on. A filter can also be dependent on the message size.
    This function can also be useful in situations where a queue backlog needs to be processed, due to a system error or an error on the reciever side, for example. In this case, u can use a Prioritized queue for urgent messages that must be processed immediately, without having to process the whole back-log first.
    How to prioritize XI messages on the integration server
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
    The parameter QualityOfService specifies how the Integration Engine should process a message. The following values are permitted:
    1)BE(Best Effort: synchronous processing). If QualityOfService is BE, the client is sent the final status for the processing.
    2)EO(Exactly Once: asynchronous processing with guaranteed execution exactly once). If QualityOfService is EO,processing occurs asynchronously and the client only recieves a confirmation of reciept with HTTP status '200'.
    3)EOIO(Exactly Once in Order: asynchronous processing using queues, that is, guaranteed execution exactly once and maintaining the sequence of successive messages). If QualityOfService is EOIO,processing occurs asynchronously and the client only recieves a confirmation of reciept with HTTP status '200'.
    Since u had choosen EOIO ,You must also define a queue name for EOIO:
    XI.QueueId=<QueueName>
    This queue name is used in the Integration Engine to process messages in the same sequence that they arrived in.
    This QueueName can consist of a maximum of 16 characters. If the first 8 characters contain 'SAP_ALE_', these r removed since this value is reserved by SAP and used internally.
    If a value is not specified for QualityOfService , the default value 'BE' is used.
    These r following websites which u wil find helpful:
    http://help.sap.com/saphelp_nw04/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
    http://documentation.softwareag.com/crossvision/xie311/admin/config.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
    cheers!
    gyanaraj
    ****Pls reward points if u find this helpful

  • User Defined Function Error - Can't find function

    Hi All,
    Version: 11.1.1.4
    I created a user defined function and added it to one of my BPEL Processes. I can see the function in JDeveloper and can compile the project without issue. We placed the jar file out on the SOA Server following the oracle user defined function examples. After placing the file out on weblogic I was able to successfully deploy the project.
    Oracle Deployment Steps:
    To deploy user-defined functions to runtime:
    1. Copy the user-defined function JAR files to BEA_Home/user_projects/domains/domain_name/lib or a subdirectory of lib.  Where domain_name is the name of the Oracle WebLogic Server domain (for example, soainfra).
    2. Restart the Oracle WebLogic Server.However, when I try to run the composite application I get the below error. I am not really sure why it can't find the Function? The jar is out on the server and the jar was added to the project?
    Error:
    Non Recoverable System Fault :
    <bpelFault><faultType>0</faultType><subLanguageExecutionFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is pnl:GetManager(string(bpws:getVariableData('inputVariable','payload','/client:process/client:input'))). The XPath expression failed to execute; the reason was: Function 'GetManager' not found.. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary></part><part name="code"><code>XPathExecutionError</code></part></subLanguageExecutionFault></bpelFault>Any suggestions would be greatly appreciated!
    Thanks,
    S
    Edited by: Scarpacci on Apr 1, 2011 6:06 AM

    try putting the jar location explicitly in weblogic server's classpath i.e. add BEA_Home/user_projects/domains/domain_name/lib to wls classpath and restart server.

  • User defined function error

    Hi All,
    I was trying to create user defined function for raising exception if any mapping error occur according to the blog 
    "Throwing Smart Exceptions in XI Graphical Mapping" by Alessandro Guarneri
    i have create the jar file and imported the classes but my udf is not able to resolve the method defined in the class.
    Please help me in how should i import the jar correctly?

    try putting the jar location explicitly in weblogic server's classpath i.e. add BEA_Home/user_projects/domains/domain_name/lib to wls classpath and restart server.

  • Queue error in BPM

    Hi,
    We are working in PI7.0. We have implemented an integration scenario where we use iDocs and BPMs.
    When we start the workflow, we get the following error in queues: "Copy Sender from Payload: Sender is Missing in Pay", and the queue gets blocked.
    In another similar scenario, we use the same iDoc header directed to the same destination, and the queues do not get blocked.
    Which is the problem?
    Thanks in advance,
    Samantha.

    Hi,
    Copy Sender from Payload: Sender is Missing in Pay
    1. Cross check the mapping again, have you assigned all the required fields for header mapping
    2. If you are not doing header mapping in payload  then Cross check in Integration directory that the checkbox " Apply control from payload" in receiver comm. channel for IDOC is unchecked.
    Regards,
    Sachin

Maybe you are looking for