Define Rules for Variants (Daily Work Schedules)

Hi All,
I wanted to set up the following rule for varients :
If Holiday Falls on SUnday then Monday should be change Off.
I have created Varient for DWS. as NORM , NORM - "C".
01 03 .X........ X......... ......X C
01 04 X......... XXXXXXXXXX X...... C
But above setting turing all Mondays to Varient C.
How can I make only Monday as Varient as C when its previous day is SUnday and Holiday Class 1.
Regards,
Kamal Rawal

Hi Kamal,
In SCAL- At the time of creating public holiday you can define in Guaranteed section as Public Holiday on Sundy (Select Sunday) , then move to next day or move to previous day
Pls check & revert..
Regards,
Mahesh

Similar Messages

Define Rules for Variants under Daily Work Schedules.

Hi All,
Can anyone explain me what is the use of Define Rules for Variants under Daily Work Schedules.
Also can some one explain what is the meaning of below representation
Rule   No      Holiday Class     HolClNextDay          Day     Varaint
01     03         X.........              XXXXXXXXXX      .....X.     A
Thanks in Advance
David

Hi David,
Thanks for putting this question . I was also searching for its answer because when variant is applied on Friday and if any full day public holiday falls on Friday then variant would be null and void.
I got confused with the holiday class 2 which is half day public holiday, what if it falls on Friday?
Variant in itself is reduced working hours and half day is one and the same thing.
I have tried rules in many ways to trigger variant on Friday:
Rule          HC current.                    HC next day.                   Days.                      Variant
XX.     01   XX.XXXXXXX                XXXXXXXXX                   ....X..                      B
XX.     02      ..X...........                       XXXXXXXXX              XXXX.XX
Or
Rule          HC current.                    HC next day.                   Days.                      Variant
XX.     01   XX.XXXXXXX                XXXXXXXXX                 ....X..                        B
In the 1st case the 2nd condition is unnecessary confusing, however things are working fine with only 1st condition.
Please clarify what is the difference in 1st and 2nd case?

Creating rules for variant

Hi gurus,
How to create rules for variant in work schedules.....Explain clearly.....
iam unable to understand x and . under holiday calender....
Explain it by taking example of having only 4 working hours before a public holiday.
thnx in adv.....
Regards,
praveen.

hi u use day of varient when u want to disrupt ur dws for some day.
here u shd know what r the holiday classes 0 is workday.
1 is holiday .2 is half day holiday and 3-9 are customer specific holiday classes.
rule NO hclas hcla n.d. weekday var
ZA 01 X.X....... .X........ XXXXXXX 1
this is how we may write ur requirement .
4 hours of working before public holiday.
that day on which u want to apply the rule that shd be either workday or halfday so x.x
the next day u want as a public holiday so check 1 that is fullday holiday.
which workdays u want to apply this u can decide in 3rd collumn.
this varient u give in DWS.
and there u change ur work schedule to only 4 hrs.
clarify with other members too.since i might be wrong.
regards,
raj.

How to link day tipe to daily work schedule

Dear Experts,
I have a daily work schedule IOFF which is supposed to be a day off. Can anyone advise if there is a way to link day type "Off/paid" to this daily work schedule IOFF ? Thanks for any input.
Regards,
Arief

Hi!
Use Daily Work Schedule class "o" to makke your DWS Off and Day type can be set at Set Work Time Management>Work Schedule>Work Schedule Rules and Work Schedules>Schedule Rules and Work Schedules ( In the option of Rule for day type )
Daily Work Schedule Class
The daily work schedule class is a feature used to define daily work schedules. You use it to create evaluation criteria for a daily work schedule. According to the evaluation criteria, daily work schedules can be used in differen ways in time wage type selection, attendance and absence counts, or in time evaluation.
The working times defined in a daily work schedule are not influenced by the assignment of a daily work schedule class. As a result, the daily work schedule class respresents an additional evaluation of a daily work schedule.
Daily work schedule classes can be identified by any number between 0 and 9.
Regards
Sheetal

Issue with respect to Daily work schedule creation for employees in UK Shif

Hi Experts,
We are implementing neagtive time management for our client . there are a set of employees who work in UK shift.
Th shift timings are a bit odd.
Timings 11:30 to 18:00 is the time when employee has to work at his Office
and 21:00 to 22:00 he has to work from home
Please make a note the above given timings is for a single day.
Please guide me how to go a head.
Regards,
Smitha

Smitha
Create break schedules as below first
01     UKBK     01     18:00     18:30               0,50
01     UKBK     02     18:30     22:00     2,50
then create daily work schedule as below
DWS grouping         01                                       Start         End
Daily work schedule UKDW   UK daily Work       01.01.1990 31.12.9999
Planned working hours               DWS selection rule          01
Planned working time            -
Planned working time     11:30 - 22:00
Normal working time             -
Core time 1                     -
Core time 2                     -
Work break schedule      UKBK
Hope it will solve your problem.
Surya

Defining rule for varients in DWS

Hi gurus
I am on the way of learning HR Time management . I came across a configuration of definind rule for varients in DWS .
I could find some standard entries there .and check for F1 help , but not under standing it clearly .
check in help.com in the link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/8a/9868bc46c411d189470000e829fbbd/frameset.htm
but cant able to find that topic . can any one explain how to how to define a rule in that table .with documentation link .
Regards
Arumugam.

Hi,
The rules allow you to stipulate that a variant of the daily work schedule should apply on certain days. Taking the following parameters into account, you can set up rules for daily work schedule variants:
The public holiday class
The public holiday class of the current day
weekday
Eg: If we want half day holiday before public holiday, without going to rule we can do through daily workschedule vairant. However,
Rule B1234546789 B123456789 1234567 variant
01 x x xxxxxx A
Second column representing the before public holiday, 3rd column representing the current public holiday, 4th column representing the weekday, 5th is variant.
Here, how i selected, i required half day holiday before pulic holiday class(1), for that i have given X in first column under B, any working days.
Good Luck
Devi

Is employees personal work schedule is same as daily work schedule?

Hi,
Is employee's "personal work schedule" is same as "daily work schedule"?
Where they are maintained?
Thanks,

Hi Thaman,
The personal work schedule represents the lowest level of work schedules. It contains the work schedule of one individual employee.
You can refer to the personal work schedule for the working times of a specific employee, as well as any working time provisions that apply on a particular day. The personal work schedule also contains any changes made for individual employees from when maintaining infotypes, in addition to any changes made for entire employee subgroup or personnel area groupings.
The daily work schedule determines the structure of working times in your enterprise at the daily level. You can also define actual normal working conditions and those that differ from externally or internally determined daily working times. In this way, you set up working times defined for specific employees.
The daily work schedule, along with Break Schedules, comprise the working times for a particular day.
Use the below for maintaining Work schedule....
Choose Human resources -> Time management -> Administration -> Work schedule -> Change.
If you are looking for IMG configuration of WS, pls let me know...
Regards
Ghouse

Data not coming from DOE to Mobile After defining Rule for device attribute

Hi All,
I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
2. In CDS table i have all the records for all the work center.
3. Now in RMM under customized , i have added an attribute named "Work_center".
4. Now i defined a rule with Device attribute mapping and activated the rule.
5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a Work center to the attribute "Work_Center" .
6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
Is my approach is correct
Regards,
Abhishek

Hi Abhishek,
You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
1. In the workbench click on the Data Object, and then right click and select "View Metadata".
2. Select Distribution Model tab.
3. Now select your DO's Association table.
4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it
as "I" and execute
If there are any entries now in the AT table, and on triggering extract if they are not coming to the
outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
specified is not the satifying.
Thanks,
Swarna
Now if you have entries w

Need Help in Calculation of Paid and Unpaid Break in Daily Work Schedule

hai,
I am a student of SAP-HCM. I am having problem with the calculation
in Paid and Unpaid Break in Daily work schedule (Time Management).
Please help.
thank you
Dev.

Hi,
The above screen shot is table where we maintain unpaid and paid breaks, we mention about when a break has to start under START tab and when it has to end under END button.
Under UNPAID and PAID tabs we mention duration of break, if its 15 mins break or half an hour or one hour depending on start and end timings.
Suppose a shift is for 9 hours in total and client wants there should be a paid break of one hour, then out of this 9 hours shift itself break would be considered.... and in case client wants unpaid break then shift would be for 10 hours out of which 9 hours will be working hours and one hour break.
When this concept has to be calculated in schema processing type would be assigned to this time pair showing break accordingly either paid or unpaid.

User defined rule for missing triples

Hi,
i would like to know if there is a way to define a user defined rule for triples that are not contained in a model. With curly brace syntax it could be something like this:
INSERT INTO mdsys.semr_validation_rb VALUES(
'test_rule',
'{?s ?p ?o. OPTIONAL{?s rdf:type ?t}}',
't is null',
'(?s <hasType> "false")',
null);
Unfortunately this is not working. Has anybody a suggestion to solve this problem with user defined rules?

Hi,
This is related to the following post.
built-in primitives(noValue,remove) for user defined rules
Note that there is something you need to pay a bit attention to.
Say your original graph contains
:John :fatherOf :Mary
but not any type classification for :John (i.e. no match for {:John rdf:type ?t})
Assume you add the following triple according to the rule you described
(:John <hasType> "false")
Now, what happens if :John is classified as a :Person (or :Parent, :Father),
do you want to withdraw* :John <hasType> "false"?
Thanks,
Zhe

OADP settings for MSS Services - Define Rules for Object Selection

Hi
Our client wants to extend MSS to all managers, and to begin with want option of "Only B002 Relationship" in drop down of Team Calendar.
I have tried all standard options but unable to find a suitable rule(Define Rules for Object Selection) which would restrict the list of employee to only B002 Relationship of Manager.
Any ideas on how to achieve it?
Regards
Yash

Hello Yash,
I think first concern here should be to make things work at your end...thus I am not focusing on your evaluation path...that you have set....
Just to kick off things so that they start work for you.....
you need to set the evaluation path as I have mentioned in my earlier reply....
These evaluation paths have been working for me...
To correct yours as per mine you need to set
ZB2 as
10 S B 002 Is Line superior of * S
and set
ZB3 as
20 S A 008 Holder * *
Now if still things does not work then...you need to check the Tcode PPOM_OLD and see if the correct reporting relationship (B002) exists for the logged in user.....
These evaluation paths are very confusing for me.....and so I am not trying to correct what you have set in ZB2 and ZB3....
And also note that there can be more then 1 way to achieve your goal with evaluation paths.....
Yash here on we will focus on this thread only.......Let Upendra clear his doubts with that thread.....right..?
Object and Data Provider evaluation path to get subordinates.
Edited by: Saurabh Agarwal on Jul 24, 2011 7:44 AM

Daily Work Schedules

Hello!
I need in a custom rule, to filter some Daily Work Schedules to generate in the time schema a special time WT. But, I dont know, how to read in time schema the Daily Work Schedules or even the Period Work Schedules. If you can give me the operation that some rule can read and the function needed to make this rule possible.
ThanX.
Ruben.

I think You can make use of Daily workschedule class in T510S Table to filter them in generating Time wage types

Create an absence longer then daily work schedule

Hi experts,
The customer wants one of the absence types allowed longer then the daily work schedule.
We use fixed working hours therefore an absence ends on the end of the planned working time.
Kind reagards,
Meir.

dear Meir,
create a new daily work schedule DWS and a new daily work schedule class (DWS class) for the special day.
can be used in substitution (if it's not taking long period of time) and only once a while during a period
can be used to generate a new PWS and a new WSR, to be assigned to employee's IT0007 if it takes longer period of time.
thx n br,
dhenny muliawaty (pei pei)

Question for customs "Define rules for default document data"

Hello all,
we would like to set up the data for AES. We set the country of origin, as you can see on the below screenshot.
The problem is that the country of origin is not forwarded to AES. In the export declaration under the item detail there is an empty field at the country of origin.
What do we have to change in the set up "Define rules for default document data"?
Thanks in advance.
Sven Sklarek

Hi Sven,
Sorry to take the conversation in a different direction, but it's very unusual to propose the Country of Origin (CofO) by default, and not usually accepted by the Customs authority. Generally the CofO depends on where you obtain the goods. If that doesn't change much, it's usual to set the CofO on the Material Master record in the ERP system - in that case the value copies automatically into the GTS Export Declaration item. That is why there is no standard configuration having IT_CUCOO as a Target Field.
Also, in many countries, CofO is not mandatory in the Export Declaration (although always mandatory in the Import Declaration). You might want to check the situation in your area.
Regards,
Dave

Defining daily work schedules

Hi all,
I am triyng to define work schedules and I have found the following problem.
I would like to define my schedules at month level. I mean, I have different schedules for different months. For instance, I've got the same work schedule from January till May, but the schedule changes in summer, this means, from June to August.
Could anyone explain me how can I define this in SAP?
Thanks a lot!
Reyes

Hi,
Go To SM36 give the job name and go for Flag icon in that u can specify ,
as per ur requirement and also check for tcode SM37.
Reward points if helpful.
Thanks
Naveen khan

Define Rules for Variants (Daily Work Schedules)

Similar Messages

Maybe you are looking for