Define the Characteristics of the validity table for non-cumulatives

Hi Friends,
Here I am designing MultiProvider ( ZCA_M01), based on the Two Business content info cubes (0IC_C03 & 0SD_C03 ) & one customized info cube (ZPUR_C01).
I done Identification for char & keyfigures also.
When i trying to activating the Multiprovider, here i am getting the error , error message is : Define the Characteristics of the validity table for non-cumulatives.
Even here I am attaching the error message help also.
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.
Please take as a high priority.
Thanks & Regards,
Vanarasi Venkat.

Hi Venkat,
If you want to include 0IC_C03 cube in your multi provider the you must make sure that the time characterestics ( 0CALDAY, 0CALMONTH ....) are present in all of the other info providers which you are including in the MP. The Time char to choose depends upon the Inventory cube in which you have mentioned during the definition. As you are using the standard cube 0IC_C03 it has the time char as 0CALDAY. Try to include this in all the other info providers and dont include more tha one Non-cumulative in the MP.
Try this and see if it helps....

Similar Messages

Validity Table in Non cumulative cube

Hi Friends,
What is the use of validity table in Non cumulative cube?
I have already studied the document 'How to Inventory
Please can any one explain me with example.
Thanks & Regards,
Ramnaresh.P.

Hi,
Validity table is created for non-cumulative key values.
Non cumulative key figures are one which are not possible to cumulate such as head count, inventory amount, these are always in relation to a point in time.
Regards,
Shiva.

How to identify the source column and source table for a measure

Does anyone have a query that I can use to positively identify the source column and source table for a cube measure in an SSAS cube? Visual Studio shows ID, Name, and Source, but it is nearly worthless in a large cube and database.
Also - the same for a dimension would be great.
If no query exists for this, can someone please explain how to find the source column/table for a measure and for a dimension?
Thanks.

DMVs don’t expose the DataSourceView content. AMO is much better suited for object model operations like
this than the DMVs. PowerShell is also sometimes an option, but in this case C# code would be much easier because analyzing the contents of the DataSourceView is much easier using the .Net DataSet class.
Hope this helps.
Reeves
Denver, CO

Regarding the inbuilt log and audit tables for APEX 4.1

Hi,
When we acces the Administrator login then we can view various logs like the sql commands that have been recently fired,user list for a workspace,access to each application.Where are these data stored and fetched.Also could we get the inbuilt audit and log table for APEX 4.1 ?
Thanks and Regards

>
Please update your forum profile with a real handle instead of "935203".
When we acces the Administrator login then we can view various logs like the sql commands that have been recently fired,user list for a workspace,access to each application.Where are these data stored and fetched.Also could we get the inbuilt audit and log table for APEX 4.1 ? This information is available through APEX views. See:
<li>APEX views: Home > Application Builder > Application > Utilities > Application Express Views
<li>Monitoring Activity Within a Workspace
<li>Creating Custom Activity Reports Using APEX_ACTIVITY_LOG
Note that the underlying logs are purged on a regular basis, so for the long term you need to copy the data to your own tables, as Martin handily suggests here.

Validity table for a Non-Cumulative key figure

Hi,
I need to make changes to a validity table for a Non-Cumulative key figure.
I know initially it is done thru Extras- > Maintain Non-Cumulative value but subsequently how to change the parameters ?
Best Regards,
-Anurag Dev

If you decide later that you require more validity-determining characteristics, you can modify the selection using the report RSDG_CUBE_VALT_MODIFY. In this report, the non-cumulative InfoCube is only changed to the extent that the new validity-determining characteristics are selected and the validity table is reconstructed. The structure of the non-cumulative InfoCube remains the same. You do not have to reload the transaction data for it.

Validation table for region/sales district/postal code combination

Hi Folks,
Is there any validation table for region/sales district/postal code combination? As I am looking for some standard functionality where a user if puts a wrong zip code/ postal code for a specifc city or country while creation of customer master then system should not allow and throws any kind of error or warning message.
Please let me know if there is somethiong like this.
I have some failt idea that we have something in standard SAP where we get a pop warning where postal code-country and postal code-city combination does not exist.
Please let me know the transcation code and table name for that.
Thanks and cheers,
Sandy

Hello,
I'm not aware of any settings for this which include sales district. For the rest a few spots to look at:
-SAP NetWeaver>General Settings-->Set Country-Specific Checks (some controls for postal code per country)
-SAP NetWeaver>General Settings-->Set Country-Insert Regions (country to region ties)
---Flexible Real Estate Management >Address Management>Regional Structure/City File-->Cities (have not worked with this area but you'll see several nodes for dealing with cities here).
Hope this helps.

What are the characteristics of the sound output from the speaker iPad3?

What are the characteristics of the sound output from the speaker iPad3?

man -s4 proc
or
http://docs.sun.com/app/docs/doc/817-0683/6mgff29c4?q=procfs&a=view
Its a virual directory structure with a directory per process. These per process directories contain more directories and files that supply detailed information on that process eg per open file information.
Access to the per process directories is controlled by checking the credentials of the accessing process against the credentials of the
process whose procfs directory is being accessed.
tim

Table for non ledger line items

hi
Iam pulling the report for non leading ledger with T code FAGLB03 and found 2 cost objects(cost center and WBSE) in line items whereas for leading ledger only WBSE is showing. We know that for leading ledger entries are maintained in table FAGLFLEXT. From which table non leading ledger entries gets pulled. Your early response is appreciated.
In the entry view cost center is there but in GL view cost center is not populated.

Thanks Bhandari
But user posting with 2 real objects (WBSE and CC) for which only WBSE is updating in total table. When i run line item report using FAGLB03, both objects are showing for non leading ledger similar to FS10N. But only WBSE is showing for leading ledger. Is FAGLB03 derive the data from BSEG table for non leading ledger.
Thanks
Venkatesh

Can I use return table in non-cumulative cubes upd rules?

hi,
Is it possible to use return table in non-cumulative cubes upd rules?
What I mean is:
In non-cumulative cubes I need to use Automatic Time Conversion for time chars and when I use return table I have to map fields from comm structure to return table.
I am designing stock cube (with granularity on storage bin and quant level) where material movement data is took from Transfer Order docs. Data for source and target storage bin are in one document item, so I have to split each record.
Regadrs,
Andrzej
ps. Maybe somebody has some technical documentation on Automatic Time Conversion?

Hello Andrez,
May be this code will be useful for you.
*data decleration
data: num type i,
      num1(2) type c,
*variable for fiscper
      lv_fiscper type RSFISCPER,
*variable for the calendar month
      lv_calmonth type RSCALMONTH,
*variable for the period
      lv_period type T009B-POPER,
*variable for the fiscal year
      lv_year type T009B-BDATJ,
*variable to find out the calendar quarter
      lv_month TYPE RSCALMONTH,
      lv_calquarter type RSFO_CALQUARTER.
*ICUBE_VALUES contain data for cube.Put these value into RESULT_TABLE
RESULT_TABLE = ICUBE_VALUES.
*add 12 times entry into result_table for 12 months
do 12 times.
append RESULT_TABLE.
enddo.
*processing for the split the value into 12 periods
loop at RESULT_TABLE.
num = num + 1.
num1 = num.
*divide the value by 12 for each month
RESULT_TABLE-/BIC/ISMPLNRV = COMM_STRUCTURE-/BIC/ISMPLNRV / 12.
RESULT_TABLE-CRM_CURREN = COMM_STRUCTURE-CRM_CURREN.
case strlen( num1 ).
WHEN 1.
concatenate RESULT_TABLE-fiscyear '00' num1 into lv_fiscper.
RESULT_TABLE-fiscper = lv_fiscper.
WHEN 2.
concatenate RESULT_TABLE-fiscyear '0' num1 into lv_fiscper.
RESULT_TABLE-fiscper = lv_fiscper.
endcase.
lv_period = lv_fiscper+4(3).
lv_year = lv_fiscper(4).
*find out the calendar month from the period and year
CALL METHOD CL_RSAR_FUNCTION=>FISCPER_CALMONTH
EXPORTING
    I_FISCPER = lv_PERIOD
    I_FISCVRNT = 'Z9'
    I_YEAR     = LV_YEAR
   I_CASE     = 0
IMPORTING
    E_CALMONTH = lv_calmonth
RESULT_TABLE-CALMONTH = lv_calmonth.
*find out the calendar quarter from the fiscper
concatenate lv_fiscper0(4) lv_fiscper5(2) into lv_month.
*find out the calendar quarter
if not lv_month is initial.
    CALL METHOD CL_RSAR_FUNCTION=>MONTH_QUARTER
      EXPORTING
        I_MONTH   = lv_month
      IMPORTING
        E_QUARTER = lv_calquarter.
    if sy-subrc <> 0.
      lv_calquarter = '00000'.
    endif.
else.
    lv_calquarter = '00000'.
endif.
RESULT_TABLE-CALQUARTER = lv_calquarter.
modify RESULT_TABLE.
endloop.
Regards
Gopal

"initial non-cumulative for non-cumulative values" is not available in DTP (0AFMM_C02)

Hi Experts,
We are working for BI implementation for AFS Industry,
when we are working on AFS specific inventory cube 0AFMM_C02 , we are facing stock mismatch problem
for AFS Stock initialization we are using the data source 2LIS_AF_STOCK_INITALIZATION instead of 2LIS_03_BX, this data source is specificly designed for AFS
when we are extracting the data using 2LIS_AF_STOCK_INITALIZATION for stock initialization and
2LIS_03_BF data source to load the Moments.
we compressed cube with Marker update for 2LIS_AF_STOCK_INITALIZATION data load(by deselecting the No marker update check box)
we compressed cube with No Marker update for 2LIS_03_BF historical data load(by selecting the No marker update check box)
we compressed cube with Marker update for 2LIS_03_BF Delta data load(by deselecting the No marker update check box)
Now we are facing stock mistach problem, we found reason for this
"initial non-cumulative for non-cumulative values" option is not available in DTP only Delta & Full options are available
and infopackage of 2LIS_AF_STOCK_INITALIZATION data source also has "Full update" instead of "Generate Intial Status"
Please let us know how can we get the "initial non-cumulative for non-cumulative values" option in the DTP level.
Regards,
Chandra

Hi Chandrakumar,
We are facing the same problem, how do you solve it?
Regards,

When do you go for non cumulative key figures?

hi all,
Can anyone explain the significance of non cumulative key figures. and when do we go for non cumulative key figures.
Can anyone explain me with an example.
thanxs in advance
hari

Hi,
chk these threads:
non cumulative key figures
Cumulative and Non-cumulative Key Figures
also,
There is also an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Assign points if this helps!!
Regards,
Dhanya.

Intregarted Planning Design for Non-Cumulative Key Figures

Hi,
I have a requirement where i have to design a planning layout for a Invenotry Scenario (Using Non cumulative Key Figures).
What should be the factors i should consider in my design specifically for non cumulative ke figures and how it is different from design for a regular (cumulative) key figure
Thanks
Rashmi.

Thanks for your response. My requirement is to design a retail inventory planning application in which one of the KPI's planned is stock price which is a non cumulative key figure and i am trying to figure out how than can be planned if non-cumulative key figures are not allowed in planning
Thanks
Rashmi.

Archiving and reload possible for non-cumulative infocube 0IC_C03 ?

Hello,
Can the cube 0IC_C03 be archived and reloaded into another cube so that the data can be accessed via a multiprovider ? I read in help (http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm) that 'You cannot use the InfoCube together with another InfoCube with non-cumulative key figures in a MultiProvider'..
While archiving seems doable, I have doubts on the reload. How do we report the data once it is archived from this cube.. Any ideas ?
Thanks

hi
please check the below link.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ead8d7b55e1bd2e10000000a11466f/frameset.htm
Regards,
madhu

How can I obtain the primary key of a table for an entity relation?

hello everybody
I am doing a consultation to a table in my data base, good this table has alone two fields, the first one is the code or pk and the second one is the description, to be presisos they are names of city and code.
From the beginning!!: This method this one in another class that is a Dialog that is going to call to the class SelecPlace ();
SelecPlace sl = new SelecPlace();
public void capturarLugar(){ // Simple void method in the mentioned class
        String place = txtProcedencia.getText() ; // a JTextField
        sl.executeStatement(place) ;
    }ok, now we see part of the code of the class SelectPlace
public class SelecPlace extends AbstractTableModel{
    Connection con = null;
    Statement sentencia = null ;
    ResultSet rs = null;
    ResultSetMetaData rsmd = null ;
    String[] nameColum = {} ;
    Vector datos = new Vector() ;
    public SelecPlace() { }
    public void executeStatement(String query){
      try{
         con = DBManager.getConnection() ;
         sentencia = con.createStatement(rs.TYPE_SCROLL_INSENSITIVE,
                                                                      rs.CONCUR_UPDATABLE) ;
         String sql = "select * from Place where descripcion like %"+query+"%'";
          rs = sentencia.executeQuery(sql) ;
          rsmd = rs.getMetaData();
          int nroColumnas = rsmd.getColumnCount() ;
          nameColum = new String[nroColumnas] ;
          //obtengo los nombres de columnas en cache
           for(int colum = 0; colum < nroColumnas; columna++){
                nameColum[colum] = rsmd.getColumnLabel(columna + 1) ;
           datos = new Vector();
            while(rs.next()){
                Vector newRow = new Vector();
                for(int i = 0; i < getColumnCount(); i++){
                newRow.addElement(rs.getObject("place_ID"));
                newRow.addElement(rs.getObject("description"));
                datos.addElement(nuevaFila);
            fireTableChanged(null);
        }catch(SQLException e){
            System.err.println(e);
            e.printStackTrace(System.err);
            System.out.println("error in statement");
        }catch(ClassNotFoundException cnfe){
            System.err.println(cnfe);
    }Ok, this code me works and I obtain in this case the field description of the table Place
Now my question is, how can I obtain the primary field of my table?
I need this value of this field that in the base of information in a bigint, and to take it to the first class before mentioned, for that I am working with a data base related

Certain duffymo and everyone!!, good I give you my scheme:
And generalizing my question, I want to obtain the value of the primary key of a table in the database, I obtain more values of the same row, but I need the primary key, and you see one with the primary key I want to turn a Long and it to insert with code java in foreign clave in another table of the database
Good of this form I believe that it would not be breaking the integrity relacional of the tables

How to populate the logical_group field in V_LTDX (table for layouts)?

Hi,
Scenario:
I have implemented the ALV using CL_SALV_TABLE. In the grid we have a 'Choose Layout' button where we have the options of choose, change, manage etc. the layouts. If we create a layout, the layout is saved in the table LTDX(view: V_LTDX).
Issue:
How do we populate the 'Logical_group' field in the table while creating/changing the layouts?
Please suggest..
Regards
s@k

Solved..:)
Solution:
While creating the ALV grid, use the method 'get_layout' of the class CL_SALV_TABLE and get the reference of the layout in a reference variable.
Data:
gw_key TYPE salv_s_layout_key.
gr_layout = gr_grid->get_layout( ).
gw_key-report = sy-cprog.
gw_key-logical_group = gc_log_grp." Pass the logical group here say logical group: 0001, 0002, etc. for each ALV
So, whenever you create/ change a layout on the ALV grid, the system automatically passes this logical group and saves it in the table LTDX.
Regards
s@k

Define the Characteristics of the validity table for non-cumulatives

Similar Messages

Maybe you are looking for