Define the language for all notifications to language receiver

Hi,
In our workflow after the manager has done an action, a notification is send to the employee.
The problem is that the text of the notification is always created in the language of the initiator. With us the language of the initiator can be different from the receiver.
I would like to define that for all notifications always the language of the receiver is to be taken and not this from the initiator.
Does anybode knwos how we can do this ?
Kind regards
Pascale Thys
Dexia Bank Belgium

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Swipe upwards from bottom of screen to launch Control Center. Make sure sound is not muted (tap the little bell)

Similar Messages

Help define the requirements for an Oracle Spatial management tool

Hi,
We are developing a tool that, we hope, will be indispensable for all Oracle Spatial and Locator dbas/users. We've released version 1.0, but we need your help to define the requirements for the next version.
What features would you like to have in a management tool for your spatial databases?
The features we've got so far:
1. Viewing of vector data in a map + attributes
2. Loading from shapefiles
3. Exporting to shapefiles
4. Validating metadata, indexes and spatial data.
We are adding editing of vectors in the next version - basic stuff for add, update and delete.
But there must be a lot more. What do you find difficult to do in Oracle Spatial/Locator? What would you like in a tool such as this?
Any feedback either to myself or the forum is much appreciated.
cheers,
Andrew
[email protected]
PS If you like to have a look at what we have done so far, go to http://www.geometryit.com/products/spatialConsole.php

Andrew knows what I have asked for but for others to think about and to start
the ball rolling, here's what they are:
1. Ability to enter own SQL commands but with PARAMETERS for attributes
and shapes as in the following examples:
SELECT ...
FROM my_spatial_table a
WHERE a.ATTRIBUTE = :attr
AND MDSYS.SDO_RELATE(a.shape,:polygon,'mask=anyinteract') = 'TRUE'
When executed the attribute value is asked for via a input box (data type?)
and the user is asked to define the SDO_GEOMETRY for the :polgygon parameter via mouse clicks on the screen.
Similarly, this would work for INSERT, UPDATE and DELETE...
INSERT INTO my_spatial_table (shape) values(:polygon)
The data type of an attribute parameter could be determined in two ways:
a) By querying the Oracle catalog;
b) By using a "PARAMETERS" command before the query as follows
PARAMETERS name type [(size)] [, name type [(size)] ...]
The PARAMETERS declaration has these parts:
name     The name of the parameter.
type     The type of the parameter.
size     The size of the parameter in characters or bytes.
2. When executing an SQL SELECT statement I would like the tool
to suggest the HINTS that are needed to improve performance.
3. Following on from 2, I would like to Tick an option that would return the
EXPLAIN PLAN that the query optimizer used when executing my query.
4. The tool has to support ALL Oracle's spatial vector data types.
5. It would be nice to be able to work with GeoRasters. Since Spatial Console
imports/exports shapefiles why not the same for rasters. However, the problem
with supporting foreign data formats is WHERE DO YOU STOP!!!!!
6. You could allow for the styling of the Spatial Console to be stored in the MapViewer catalogs or use the MapViewer catalogs when styling an Sdo_Geometry if it exists (I note that your tool extracts the SDO_METADATA
why not the MapViewer metadata as well)?
regards
S.

ME21N : Donu2019t copy the price for all condition types from last po

Dear.
When I create a purchase order the price for all condition types are copied from last purchase order inside the info-record.
But I have some condition types like FRA1 or FRA2 that I donu2019t want that system transfer price from last purchase order.
How can I do that ?
Thanks.

Hi Cris,
Go to SPRO>MM>PUR>Info Record>Define Price History> Here with your Purchasing organization if the tick is active that
Specifies that the order price history (PO price history) is to be updated with the effective price.
Normally, the order price history is updated with the net price.
Procedure
Set this indicator if you want the order price history to be updated with the effective price.
Thanks
Diwakar

What is the "catchAll for all faults" equivalent in fault-policy.xml

Hi
This is regarding the catchAll equivalent tag in fault-policy.xml file
fault-policy.xml has two sections - Conditions & Actions
In Conditions, you'll define several <faultName name="XXX"> and corresponding <condition>, <test> & <action ref="">.
But what I want is, how do you define a condition for all Fault types (something like a catchAll activity)?
Lets say i need a single condition for all faults, so i want to say
<conditions>
<faultName name=*"ALL_FAULT_TYPES"*>
<condition>

<action ref="ora-human-intervention">
</condition>
</faultName>
</conditions>
I've searched documentation, blogs but could not find any.
Only thing i could find is, if we dont give any <test> tag, that means it is like a catchAll for that particular faultName. I need a similar one, but for all faults.
Appreciate your response.
Regards
RaviKiran.
Edited by: kiransaravi on Oct 16, 2012 12:39 AM
Edited by: kiransaravi on Oct 16, 2012 12:40 AM

Hi Ronald Van,
what do you mean by this statement .
Mind: the fault-policy framework catches faults in invocations of (external) services from BPEL, Mediator, etc. Internal BPEL faults such as errored assign activities are >not caught.Is it like faults generated while invoking only will go to faultpolicies ?
I want to generate a email in case of faults to notify the customer. faultpolicies is working good for remote and binding fault and i am generating mail using java. but in case of selection failure it is not referring to fault policies. So Is generating a email from catchall block is the only solution for this or is there any other way.The problem with catch all block is that the instance state will be completed and my monitoring is affected. I want to generate a email and the process should be in running state . Is there any way?
Please suggest .
Thanks in Advance
regards,
Raju

How Can I Defined Amount Limit For All Invoices For A Supplier ?

Hi ,
I Want To Define Amount Limit For All Invoices For Supplier When all Invoices Amounts Be Specify Amount It Make hold For It
Thanks,
Mohamed Gamal

Hi.
At Suppliers site:
Invoice Amount Limit. If you enter an invoice for a supplier site that exceeds the invoice amount limit you specify, Payables applies an Amount hold to the invoice during Invoice Validation. You cannot pay the invoice until you release the hold. You can release the hold by adjusting the invoice amount, changing the Invoice Amount Limit for the supplier site, or you can manually release the hold in the Holds tab of the Invoice Workbench.
Octavio

How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out.

Need to run the report for All Values when Null is passed in parameter

Hi All,
In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
IMP : My Database is SQL Server
where
(table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
I also tried simply
table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
Any suggestions on how can I handle this? Any help would be highly appreciated.
Thanks,
Ronny

thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
also please share the SR number, so i can also check the same.
can there be any other work around to this?
thanks,
ronny

Creating a Master virtual hard disk and using the same for all other VM's

Hi,
We would like to create a master virtual hard disk and use the same for all other VM's. Can we do that ?
my requirements :
1) create 10 VM's
2) first create a master virtual hard disk with win OS and use the same to create the 10 VM's.
3) After creating the VM's change the HDD size.
              -- if i have created master virtual disk with 500GB , and use the same for creating a virtual machine. can we change the HDD size to 1TB ?
After creating the VM's ,i will change the system names and activate the windows accordingly.
Will there be any implications ,if we can/will do like this.
Thanks.

Hi Suren424,
I think Using Differencing Disks may cover your needs .
Please refer to following setps:
   "Create the Parent Virtual Machine Configuration and Virtual Hard Disk
    Install the Operating System, updates, and common software
    Generalize the installation
    Prepare the parent virtual hard disk
    Create the differencing disks
    Create virtual machines that use the differencing disks
For details please refer to follwing link:
http://social.technet.microsoft.com/wiki/contents/articles/1393.hyper-v-virtual-machine-vm-parent-child-configuration-using-differencing-disks.aspx
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I bought a new iPhone and only photos from the last 30 days were transferred to my photostram on icloud. I thought icloud was the storage for all my old photos. How do I access the old photos on icloud?

I bought a new iPhone 5. Only photos from the last 30 days were transferred to my photostream on iCloud. I thought iClud was the storage for all the old photos. How do I access the older photos than 30 days on iCloud?

janqfromnor wrote:
I bought a new iPhone 5. Only photos from the last 30 days were transferred to my photostream on iCloud. I thought iClud was the storage for all the old photos. How do I access the older photos than 30 days on iCloud?
Where, exactly, did you read anything from Apple that suggested that iCloud Photostream was permanent storage?

How to migrate the calendars for all users?

At work we have two Mac servers, both running Mountain Lion. I'm looking for a way to migrate the calendars for all the users from server A to server B. I've recreated all the users on the new server, as there are problems with most users on the old server.
I've seen some topics covering backing up calendar data on the server and seen some PostgreSQL related, but nothing seems to apply to Mountain Lion. How do I create a PostgreSQL dump of the calendars? I know I will have to edit the GUID's to make it work on the new server. Or is it as simple as copying the data from /Library/Server/Calendar and Contacts/ to the same location on the new server?

At work we have two Mac servers, both running Mountain Lion. I'm looking for a way to migrate the calendars for all the users from server A to server B. I've recreated all the users on the new server, as there are problems with most users on the old server.
I've seen some topics covering backing up calendar data on the server and seen some PostgreSQL related, but nothing seems to apply to Mountain Lion. How do I create a PostgreSQL dump of the calendars? I know I will have to edit the GUID's to make it work on the new server. Or is it as simple as copying the data from /Library/Server/Calendar and Contacts/ to the same location on the new server?

I pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

i pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support

Seeding the cache for all users

We are facing some performance issues (even after using aggregate tables) and are looking into seeding the cache for all users so that the dashboard pops up immediately.
So far I couldn't make it work. As Administrator I created an iBot to run a report for 1 month (dashboard has a dashboard prompt on the period) with Data Visibility set to 'Personalized (individual data visibility)' as I understood from the manual this is the way to seed the cache for all users. Now when I log on with my personal userid and set the prompt value to that specific period it is not using the cache.
Obviously destination was set to 'Oracle BI Server Cache' and cache has been turned on.
Does anyone have any suggestions ?

We are facing some performance issues (even after using aggregate tables) and are looking into seeding the cache for all users so that the dashboard pops up immediately.
So far I couldn't make it work. As Administrator I created an iBot to run a report for 1 month (dashboard has a dashboard prompt on the period) with Data Visibility set to 'Personalized (individual data visibility)' as I understood from the manual this is the way to seed the cache for all users. Now when I log on with my personal userid and set the prompt value to that specific period it is not using the cache.
Obviously destination was set to 'Oracle BI Server Cache' and cache has been turned on.
Does anyone have any suggestions ?

Mounting drives on the desktop for all users

Hi
Is there a way of mounting drives ( like USB pens) on the desktop for all users please?
It's a causing a lot of confusion here... you think the USB drives aren't working when you can't see them being mounted in front of you.
I do realise you can set this in Finder/Preferences but I wondered if there were a way of just making it the default for any user that logs in ( whether locally or to the domain).
Thanks for your assistance.

micromike wrote:
Thanks for your help Barney.
Hmmmm....why would anyone disable this basic thing?
Here's a reason. I don't use the Desktop, so why would I want the drives to pop up on my desktop.
They appear in my Sidebar in any Finder window.
That's why I turned it off on my system. You'd have to ask the 1000 users why they turned it off.
However, I'm not sure I understand what you want. If you mount a usb drive on your system, and share it out over the network, it is not a Hard Drive on any network user's desktop. It is a network share.

Is the installation file for adobe reader, the same for all the versions of windows ? Is it ?

Hello,
I want to know if the installation file for adobe reader is it the same for all the windows ?
It is because I have to do an automatic installation for XP, seven and windows 8...
It is also the same between 32bits and 64bits ?
Thanks.
Best regards
Sofia Luna

It may be worth mentioning two things.
1. Adobe provide extensive information on Enterprise Deployment of Acrobat and Adobe Reader.
2. You may well need a redistribution license to do this, if you are installing on behalf of anyone (accepting EULA for them), pushing, or hosting etc.

Define the language for all notifications to language receiver

Similar Messages

Maybe you are looking for