Define the User/Passwort for a XML request ProcessInstanceStateChanged
Hi,
I created a workflow which starts another workflow on a remote system via web activity "start workflow" function and then waits till the workflow on the remote system is processed and calls back to the original system.
In the original system I can define which user and password is used for the xml communication to the remote system, which works fine. SWXML show the XML messages on both systems and the worklow is started by the specified user.
When the Workflow in the remote system is processed the system creates a XML request ProcessInstanceStateChanged
to inform the calling system that the process is done and it can go on with the workflow there, but this XML document just seems to get lost. The SWXML shows no status for the document in the remote system and there is no entry for this document in the original system.
The documentation says that I have to specify the users for which XML requests are accepted. But there is no information how I can configure the workflow in the remote system to use a special user and password for that. Can anyone tell me where to configure this? (currently the xml is send via wf-batch user which cannot work due to the genereted password etc.).
Thanks in advance
Roman
From the little information available here I can suggest following:
1. Check the Account validity and authorizations of the User used for authentication from DOT NET. If possible, assign SAP_ALL in Development and repeat tests. Later we can narrow down the access easily.
2. There is a known Kernel issue with ICF logon message handling, described in SAP Note 1241566 - Set of corrections: Logging on 1/2008. Check if the recommended Kernel patch level is already applied.
If none of the above helps, please send me the following:
1. Trace file for the work process 0 in transaction ST11 on the application server spsisd_ISD_00
2. Generate trace files with the highest trace level (3) as per SAP Note: 507994 - Generating plug-in trace files for troubleshooting and send it over.
We can look at various Kernel and Service level calls from trace files which should help us identify the root cause.
Similar Messages
-
Error while getting the ORACLE user account for your concurrent request
Hi ,
When I am submitting the Concurrent Program from OAF page Iam getting
Error
Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
When we will face this error.
Not able to submit the Request
KrishnaKrishna
Try like this
public int submitCPRequest(String shipmentId) {
System.out.println("into submitCPRequest");
try {
OAApplicationModule am = pageContext.getApplicationModule(webBean) ;
OADBTransaction transaction = am.getOADBTransaction();
Connection conn = transaction.getJdbcConnection();
ConcurrentRequest cr = new ConcurrentRequest(conn);
cr.setDeferred();
String applnName = new String("XXAPL"); //Application that contains the concurrent program
System.out.println("ApplName"+ applnName);
String cpName = new String("SHIP_REQ"); //Concurrent program name
System.out.println("Concc Name"+ cpName);
// String cpDesc = new String("Shipping Request"); // concurrent Program description
// Pass the Arguments using vector
// Here i have added my parameter headerId to the vector and passed the
//vector to the concurrent program
Vector cpArgs = new Vector();
cpArgs.addElement(shipmentId);
System.out.println("Args"+ cpArgs);
After this it is going into exception
// Calling the Concurrent Program
int requestId = cr.submitRequest(applnName, cpName, null, null, false, cpArgs);
System.out.println("Req Id"+ requestId);
tx.commit();
return requestId;
catch (SetDeferredException e)
throw new OAException("SetDeferredException " + e.getMessage(),OAException.ERROR);
catch (RequestSubmissionException e) {
System.out.println("Into Exception");
OAException oe = new OAException(e.getMessage());
oe.setApplicationModule(this);
throw oe;
}Thanks
AJ -
Dear Techies,
We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
Kindly share some ideas to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
Thanks and Regards
Dileep Kumar.Hi Mahesh,
Thanks for reply.
I have gone through the link that you have suggested. But our EIT user hook validations doesn't have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
Thanks and Regards
Dileep Kumar. -
What are the User Exits for Sales Order creation process?
Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
MindaugasPlease check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar -
What is the user exit for automatic account determination in PO
Hi Experts
I ned to know what is the user exit for automatic account determination in PO
my client needs the document type to defines Account Assignment Category.
choosen a document type Account Assignment Category is defined automatically. you can't choose
a wrong Account Assignment Category from the drop down list.
thanks form you help.If this is the case than why don't you use the Transaction variant
SHD0: http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
If you have knowledge of Transaction variant then you can use SHD0 tcode and generate the transaction using default type and give that transaction to user instead of ME21N so they will not have the issue.
The exact solution for your problem is as follows
Go to Tcode SHD0 and enter the transaction variant
In T code field enter ME21N and then enter the ZXXXX or the name you want to keep in transaction variant field and hit create button
This will take you to ME21N transaction and here you just enter the data but make sure you enter the A/c which you want to default.
Once you finish system will save this one as a variant
Every time you hit or enter the pop up screen comes here you just hit enter and whichever data you want to default that you have to select in the Popup by checking the Box
W content and output only for your case the field XXXXXXXX should be selected for W content and output only
Make sure you have value 1 in contents field
If not then restart the variant again and on the ME21Nscreen reselect the invoice field
Later exit and save (save in the object which you can transport)
Then from SHD0 transaction select GOTO create variant transaction and here you careate the tcode and use that tcode for ME21N (e.g ZTRAN - For specifix sto) -
How to obtain the encoding scheme for an XML document
How do you go about reading the encoding scheme for an XML document??
More specifically how do I read the line:
<?xml version="1.0" encoding="UTF-8"?>
(Using Win32 C++ XML Parser 2.0.3 as SAX).
nullI work mostly with the Java versions of the parser so you'll have to make the translation to C++. As far as I know, you can't use the SAX API to access to the encoding.
You need to use the DOM along with Oracle's extension to the basic DOM functionality. Oracle's package, oracle.xml.parser.v2 defines a class which implements the Document interface called XMLDocument. This class has a method, getEncoding(), which returns the encoding. You would use the method in getDocument() in the Parser base class inherited by DOMParser to retrive the XMLDocument.
Jeff -
The user session for a SAP GUI for HTML could not be created/generated.
Hi,
May I know what could be the issue for the above issue?
We are trying to request for a ITS in a c#.net program with the following codes.
HttpWebRequest request = (HttpWebRequest)WebRequest.Create(strURL);
request.Method = "Get";
request.ContentType = "application/x-www-form-urlencoded";
HttpWebResponse response = (HttpWebResponse)request.GetResponse(); <<<<<< This line is throwing error >>>>>>
Stream responseStream = response.GetResponseStream();
However, in our legacy system of classic ASP script, we are not encountering any issues and manage to get the response from the ITS. Accessing the url on IE is also working fine.
set xmlHTTP = CreateObject("Microsoft.XMLHTTP")
xmlHttp.open "GET", URL , false
xmlHttp.send()
str = xmlHttp.responseText
Any help is much appreciated.
Thanks.
BertinaFrom the little information available here I can suggest following:
1. Check the Account validity and authorizations of the User used for authentication from DOT NET. If possible, assign SAP_ALL in Development and repeat tests. Later we can narrow down the access easily.
2. There is a known Kernel issue with ICF logon message handling, described in SAP Note 1241566 - Set of corrections: Logging on 1/2008. Check if the recommended Kernel patch level is already applied.
If none of the above helps, please send me the following:
1. Trace file for the work process 0 in transaction ST11 on the application server spsisd_ISD_00
2. Generate trace files with the highest trace level (3) as per SAP Note: 507994 - Generating plug-in trace files for troubleshooting and send it over.
We can look at various Kernel and Service level calls from trace files which should help us identify the root cause. -
Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) atFor those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc. -
my icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?
To change to iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID then sign in with the new ID. If you don't know the password for the old ID, and if the old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
How to find the user-exit for transaction fpp2
Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar. -
How to find the user exit for order cancellation
I want to find the user exit for order cancellation. And also to ensure that no one amends the order once the canellation has taken place. The cancellation shall be deemed to be affected only if the vendor has confirmed the acknowledgement of the order cancellation.
I have got a Zreport where this order should not come as open order item.
Please tell me the method of finding the users exit for order cancellation and stop the order from getting modified. And also how to find the tables in which the data has to be updated that the order has to be cancelled.
In the PO header i want an additional tab <cancellation> by which the user by the help of userid and password should be able to cancel the order. An order once cancelled cannot be undone. A new order has to be placed. The new order can be placed refencing the cancelled purchased order.
My client has got a very stringent requirement. In the past cancelled order has been undone and caused lot of problems.
Regards.hi
pls tell me t.code so that i will send all user exits related to that particular t.codes
Thanks & Regards
phaneendra -
How to find the user exit for a screen..
Hi,
plz help me how to find the user exit for a screen..?
Regards
AnbuHi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object IN ('SMOD', 'SXSD')
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(105) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
SORT jtab BY object.
DATA : wf_txt(60) TYPE c,
wf_smod TYPE i ,
wf_badi TYPE i ,
wf_object2(30) TYPE c.
CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT jtab INTO wa_tadir.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
WRITE:/(105) sy-uline.
ENDAT.
CLEAR wf_txt.
AT NEW object.
IF wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
ELSEIF wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 sy-vline,
2 wf_object2,
105 sy-vline.
ENDAT.
CASE wa_tadir-object.
WHEN 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE modtext INTO wf_txt
FROM modsapt
WHERE sprsl = sy-langu
AND name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
SELECT SINGLE text INTO wf_txt
FROM sxs_attrt
WHERE sprsl = sy-langu
AND exit_name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 sy-vline,
2 wa_tadir-obj_name HOTSPOT ON,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
AT END OF object.
WRITE : /(105) sy-uline.
ENDAT.
ENDLOOP.
WRITE:/(105) sy-uline.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat. -
To find the User Exits for a particular Transaction.
hi,
I want to find the number of User Exits for a The Transaction MM01 or MM02,
I serched in the forums but could not find satisfactory ans,
I tried with:
T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
But its not helping me,
Please help me.
Thanks and Regards
Suraj S Nair.hi ,
if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
Finding the user-exits of a SAP transaction code
* Finding the user-exits of a SAP transaction code
* Enter the transaction code in which you are looking for the user-exit
* and it will list you the list of user-exits in the transaction code.
* Also a drill down is possible which will help you to branch to SMOD.
* Written by : SAP Basis, ABAP Programming and Other IMG Stuff
* http://www.sap-img.com
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
Regards,
Prabhudas -
What are the different methods to find the user-exit for any requirement?
Hi Everybody,
What are the different methods to follow to find the user-exit for any requirement?
Thanks & Regards,
Nagaraju MaddiThe following program search all the user exits involved with a T-code:
Selection Text: P_TCODE: Transaction Code to Search
Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
* Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN. -
Where can I find the Users Manual for the DROID TURBO?
Where can I find the Users Manual for the DROID TURBO?
https://motorola-global-portal.custhelp.com/app/product_page/faqs/p/30,6720,9277/session/L3RpbWUvMTQxNTI0NTY1Ny9zaWQvc0xvbk1JNm0%3D#/how_do_i
Maybe you are looking for
-
Where is the Align Image to Text in DW6 that was in Properties before in DW 5.5
From CS5.5 - DW 5.5 Help Align an image You can align an image to text, another image, a plug‑in, or other elements in the same line. You can also set the horizontal alignment of an image. Where is this in DW 6. It use to be on the Properties panel a
-
hi everybody, we have some hi8 tapes that we would like to put onto our computer. however the camcorder no longer works. Does anyone know if there is a machine that takes hi8 tapes which we can plug into our apple? or if there is a way of getting aro
-
Ultra 10 - invalid system frequency
Hi all, I am encountering some hardware problems with an Ultra 10 workstation and just wanted to see if anyone has had the same problem or can confirm my suspicions. The system boots fine, but shortly after will crash to the ok prompt. When the boot
-
I have tried several times to add file to library then iPod. It all looks OK, it does not show up. It will immediately play when I open iTunes on the computer, but not available on iPod. I cannot locate the playing file in iTunes
-
I don't understand how to combine 2 calls for a conference call. I tried the Merge Call button (from memory, I think that is what it is called), and all it did was put one on hold and connect me to the other person, back and forth, it would not combi