Define unit of measure for another language
Hi,
While maintain quotation I got an error message "Unit of measure ST not defined for language ES". How unit of measure is defined?
Hi,
I am not sure but I think you need to logon to SAP with ES language and maintain units of measure from IMG; SAP NetWeaver- General Settings- Check Units of Measurement.
Melih
Similar Messages
-
Unit of measure for a pallet layer in MATMAS03
Hi all,
maybe ths is not the correct forum where to post this question, if it's out of topic I apologize in advance.
Fast question:
What is LAY? it is alternative unit of measure for pallet layers?
When i receive the IDOC i recieve LR as UOM, what is the relation between LR and LAY?
Thanks & regards
AndreaThese units could have been defined only in your system (I don't see them in ours). If it is so, no one here will be able to answer.
The conversion factors could be in Material Master (MM03), on Basic Data screen click Additional Data button and go to the Units of Measure tab. Also see tables MARM and T006. -
IS-Retail:how to maintain different unit of measures for a article
hi experts,
can anyone tell me how we maintain different unit of measures for sales and purchasing for a article.base unit of measure,order unit,var unit.Hope for a good answer.
RegardsHi,
Go to MM42, select basic data view
In,Units of measure/ EANs /dimensions sub tab
there u can see four radio buttons
B.Un Unit of measure is base unit (used internally only)
O.Un Unit of measure is the order unit - Purchasing
D/L.Un Unit of measure is delivery unit/issue unit - Logistics
S.Un Unit of measure is the sales unit - Sales
for eg:
First line enter EA (each) or PC (piece) in Auom for a material and enter 1 in Number and select radio button for B.Un
Second line enter CT (carton) in Auom and enter 10 in Number and select radio button for O.UN (when you creating a PO it UOB automatically picks as CT)
Third line enter PALin Auom and enter 50 in Number and select radio button for D/l .UN (when u creating a delivery UOB picks as PAL ie pallets)
Fourth line enter EA or PC and enter 1 in Number and select radio button for S.UN (when u creating a Sales order UOB picks as EA or PC as u defined)
Mohan -
Alternative unit of Measure for variant material
Dear All,
Here is an interesting scenario,
There is a naterial Billet with two variant characteristics length and size. and base unit of measure is TON. Now alternative unit of measure is PCS. How can define the conversion factor on the basis of these two variant characteristics.
In normal material (without variant char.)
we can define conversion factor 1PCS= 2TON
For variant material,
For the material Billet with variant charc length and size how can i define conversion
so that system calculates diff. PCS with diff. length and size but material is same. So how can i Do that.
for example for same material Billet but variant char. Length is 6 M and size is 120*120 ,its wt will be 2 TON for 1 PCS.
for the same material Billet with variant char. length 12 M and size 120*120, its wt will be 12TON for 1 PCS.
How can i cater this for the same material.Hi Shoaib,
We have faced the similar scenario for steel industry. Based on my experience, it is not possible to define variable values for Alternative UOM conversion with the variant characteristic/configuration, specially if you want SAP to maintain inventory with variable conversion rate.
Use the Batch specific unit of measure for this situation.
1) Create batch specific UOM i.e. Ton_per_pc (TOP) --- User proportional unit conversion
2) Create batch characteristic ton_per_pc and assigned UOm.
3) In material master additonal data select proportion unit and enter the standard conversion rate between ton & pcs.
4) While doing GR - In batch creation you can enter whatever the conversion rate is and Inventory will be updated accordingly.
Regards,
Ravi. -
HELP Make Settings for Units of Measurement for Monitoring of Consumption
Hello All:
I just cant' define an unit of measure to stablish consumption calculation. I know how to make all the other settings, but I just can't stablish the unit of measure to use in there.
Could please somebody gime this explanation ? Step by step ?
I've read that are preconfigured units of measure for examplo MPG miles per gallon US but I will use Kilometers per litre.
I want to know how to create this unit
how to link it with an existing SI group
So I can use it in the step Make Settings for Units of Measurement for Monitoring of Consumption
thanks in advance
Luis HenriqueDear Luis,
Please use CUNI t code for creating unit of measurement. Please follow any exist Unit of measurement and replicate the same. This is a configuration so will have transport requirement
Regards
Gajesh -
User-defined units of measurement - cannot see mine in the MDM Console
Hi,
I've created some user-defined units of measurement through the UOM Manager. But when I try to assign those for a field type in my repository (through the Console) - I cannot do this because my custom units are absent in the list.
The situation makes me doubt if it is even possible to work with custom user-defined uom's in MDM...
Any ideas?
Thanks in advance.Hi Aliaksandr,
I don't know if this can solve your problem, but I have catch some problems on Measurements that have been solved when I installed the MDM Hotfix 1 (5.5.41.70 version 5.5 SP5).
Hope this can help you.
Vito -
Report for Units of measurement for Material
Hi
Is there any report to extract the alterante unit of measurements for materials in a plant.
ThanksHi,
Please use the below table,
Related to Materials:
MARA - Material Master: General data
MAKT - Material Master: Description
*MARM - Material Master: Unit of Measure*
MAPE - Material master: Export control file
MARC - Material master: Plant data
MARD - Material master: Storage location
MAST - Material link to BOM
MBEW - Material valuation
MLGN u2013 Material Master: WM Inventory
MLGT u2013 Material Master: WM Inventory type
MDIP - Material: MRP profiles (field contents)
MKOP - Consignment price segment (old versions of SAP)
EBEW - Valuation of sales order stock
QBEW - Valuation of project stock
MVER u2013 Material Master: Consumption <Plant>
DVER u2013 Material Master: Consumption <MRP Area>
MVKE u2013 Material Master: Sales <Sales Org, Distr Ch>
MLAN - Material Master: Tax indicator
MARC - Material Master: Plant data
MAPR u2013 Material Master: Forecast
MARD u2013 Material Master: Storage Location
MCH1 u2013 Material Master: X Plant Batches
MCHA u2013 Material Master: Batches
MCHB u2013 Material Master: Batch Stock
MDMA - MRP Area data
DBVM - MRP Planning File Entry: MRP Area
MOFF - Outstanding Material Master Records (Maintenance status)
MARCH - Material Master C Segment: History
MARDH - Material Master Storage Location Segment: History
MBEWH - Material Valuation: History
MCHBH - Batch Stocks: History
MKOLH - Special Stocks from Vendor: History
MSCAH - Sales Order Stock at Vendor: History
MSKAH - Sales Order Stock: History
MSKUH - Special Stocks at Customer: History
MSLBH - Special Stocks at Vendor: History
MSPRH - Project Stock: History
MSSAH - Total Sales Order Stocks: History
MSSQH - Total Project Stocks: History
Regards,
Mohd Ali. -
Unit of measure for calculation type C must be completed
Hi All
When releasing some contracts in SRM , we are getting the error message as above.
The error message doesn't specify any particular part and the contract has more than 3000 parts.
There are no conditions at header or item level.
There is no Target quantity also. Just a Target value for the contract and prices for individual items are maintained.
We are using extended classic scenario and the contract is manually created in SRM.
I have checked the OSS notes for this error, but they are mostly for contract creation in Bidding and not for a manually created SRM contract.
We checked the UOMs for all the contract parts with the UOMs ( Base and Purchasing) in ECC Material Master and they are OK.
In our scenario , MM changes in ECC are replicated to SRM in real time
Any pointers towards pin pointing the error will be rewarded!
Regards
KedarHi,
We encountered this error message and resolved the problem by applying the following 3 SAP Notes:
a) Note #1022928 - Unit of Measure for Calculation Type C Must Be Completed
(Previously Mentioned)
b) Note #1702484 - Unit of Measure for Calculation Type C Must Be Completed
c) Note #1517648 - Default Conditions Added for Product Category Item Type
Although the contract required is similar to a "Limit" item, but had to be placed for bid, then the RFX PS Item Type was set to "Service" to receive the bid responses. After accepting the bid response, then we created a contract from the bid response. Since it was to be a "Limit" type contract, then we immediately removed the data from the following fields:
Remove the Quantity
Remove the Unit of Measure
Remove the Price
Remove the Price Condition
After removing the values from these fields, then we switched the PS Item Type from "Service" to "Product Category". We added the Guaranteed Minimum and account assignment data to encumber the funds. We were able to "Release" the contract successfully.
Bob Zinsmeister -
Dear Friends,
I have cretaed RFQ for services such as Manpower Hiring where Item category is,"D".Unit of Measure is UT.
Now I have selected the line item and clicked on Services to enter the details of Manpower such as Welders,Fitters,Carpenter etc. and here Unit of measure is HR (Hours).
Now when I am taking print out of this RFQ.Unit of Meauser for Manpower is UT,it is correct.But unit of Measure for Welders,Fitters,Carpenter etc is STD.Infact it should be HR.
I have checked the table ESLL and value of Unit of Measure here for Welder,Fitters,Carpenter etc and it is STD.
Can anyone explain me why the values are flowing as STD but not as HR?
Thanks in advance.
Regards,
ShrikantHi ,
Check is there any translation happening for your unit mentioned..
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1c/1b5d427609c153e10000000a1550b0/content.htm
I remember i had this issue once ..
Thanks,
sudhi -
Unit of measure for stock , Goods issue , Purchase.
Dear All Experts,
How we can maintain different unit of measure for Stock, Goods Issue, Purchase?
Regards,
Sandeep.Hi,
The UOM qualifies the quantity you enter on the
purchase order line. This will default in if you entered an item number, if not enter
a UOM of your choice using the List of Values.
Please Refer the following links...hope it helps you....
http://help.sap.com/saphelp_45b/helpdata/en/c6/f83bb94afa11d182b90000e829fbfe/content.htm
http://www.admin.cam.ac.uk/offices/finance/training/manuals/inv_training_stores_user.pdf
Regards,
Udaya. -
How to update Unit Of Measure for a material in BAPI_SALESORDER_CHANGE
Hi All
How to update Unit Of Measure for a material in BAPI_SALESORDER_CHANGEhi,
in BAPISDITM structure, which is their in orderitemin
update updateflag of BAPISDITMX, which is their in orderiteminx for the same field with update flag = 'U'
kindly try with <b>T_UNIT_ISO</b>
or
<b>TARGET_QU</b>
comeback with u r comment
regards,
pavan
Message was edited by:
pavan kumar pisipati -
Do you have any idea of 'Mass Unit Of Measure for DESADV'?
XI mapping
'Mass unit of measure for DESADV'
What action is supposed to do to for above words?To my understanding DESADV is an Idoc type we use when we deal with deliveries. I presume that the filed Unit of measure is not mapped in this idoc type in your system.
Pls give us more details.
Regards,
Mani. -
Need Multiple Units of Measure for a given material due to multiple vendors
Hello,
We have a requirement where we must have multiple units of measue (each, box, case, pallet) for a given material.
Background:
We have multiple vendors for one SAP material number. We need to store 4 levels of units of measure for each vendor+material combination.
Unit of Meaure levels
1. Each
2. Innerpack (ex: 12 each = 1 innerpack)
3. Box (ex: 36 eaches = 1 box)
4. Pallet (ex: 100 eaches = 1 pallet)
Standard SAP allows in MM01 additional data --> Units of Measure only 1 Ea, Box, Plt, etc.
Our requirement is to allow multiple Units of Measure due to multiple vendors providing the same material.
So, our unique combination is by a Material+Vendor.
We are considering adding the vendor name and vendor number to the material master --> additional data --> Units of Measure tab.
Does this seem like a good solution? What impacts do you foresee with approach?
Any alternatve solutions?
We thought we could enhance the purchasing info records to allow multiple units of measure too but then we need to also add many fields to hold the weight, lenght, height, width, volume, country of origin, etc.
Please recommend a best practice or solution to handle this requirement.
Thanks in advance!!!Hi,
Maintain the alternative units in Material Master in Additional Data -> Units of Measure section with proper conversion factors.
Create individual info-records i.e. per mtl-vendor combination & in the info-record maintain the order unit, along with other details as required.
Now when you create a PO, the details will be read from the info-record. To test the same, create them in your sandbox & see if it meets your requirement.
Hope the above clarifies your query.
Regards,
Vivek -
How to hide/suppress unit of measure for values of columns in structure
hi,
hi i am using following in rows and columns.
Rows:
1. material group
2. structure (key figures)
key figure 1
key figure 2
key figure 3
3. base unit of measure
Columns:
1. structure (time scale)
fiscal period 1
fiscal period 2
fiscal period 3
fiscal period 4
If I run the report I am getting unit of measure for each key figure in each fiscal period. I wan to show unit of measure only once in a base unit of measure (row).
I want to suppress / hide unit of measure in columns (time scale - fiscal period). If I wasn't using strcture, I could have used NODIM in formula. But I dont think that I can use NODIM in strctuere.
Is there any alternative.
pls suggest. Thanks.It seems that i have found the answer. I have checked the query properties --> check the option - Display scaling factors for key figures.
Pls let me know if you have any other alternatives. Thanks. -
Leave unit of measure for calculation type A empty
Hi Gurus,
We are in SRM Extended classic scenario with 5.0 version.
Here in SRM we have Procurement contact with process type Global Outline Agreement (GCTR).
Currently we are facing problem while amending the condition type in the contact line item. When we change the condition type for particular line item then getting error message "Leave Unit of Measure for calculation type A empty. (item 10).
On the line item the condition could look like this
Condition Price Start Date End Date
Price(Contract/Bid) 100 EUR 2010-02-22 2010-12-31
gross surcharge % 5,5 % 2010-02-22 2010-03-31
gross surcharge % 6,5% 2010-04-01 2010-06-30
gross surcharge % 8,5 % 2010-07-01 2010-12-31
when we try to add additional conditon like "gross surcharge %" then we got this error message
Leave unit of measure for calculation type A empty
if I delete all condition "Gross Surcharge%" then the error disapear and then I can try again, sometime we could create those condition without problems but offen we have this error.
Can any one help me to get rid of this error message.
Thanks In Advance,
Jakob Banginitially you could do multiple periods but when you change the condition it is not allowing you.
can you make inactivate that andd new line item and add same item with new condition
(SRM might have limitations)
I tried this works for me
MM 123 -
FIRST :-
price contract bid - 43.99 USD 2010.09.02 to 2010.09.02
Discount (Absolute) - 3 % 2010.09.02 to 2010.09.02
Discount (Absolute) - 5 % 2010.09.03 to 2010.09.03
same GOA edited change version created
price contract bid - 43.99 USD 2010.09.02 to 2010.09.02
Discount (Absolute) - 4 % 2010.09.02 to 2010.09.02
Discount (Absolute) - 5 % 2010.09.03 to 2010.09.03
no erorr for me and GOA released too and reached backend too.
Muthu
Maybe you are looking for
-
Error when trying to burn a Data DVD
Whenever I try to burn a Data DVD I get the same error - "The items in this playlist will not fit on one data disc." The playlist in question is 2.88gb, well under the 4.3gb limit. Is this a known issue? I remember an older version of iTunes would do
-
My Western Digital external hard drive which I use as a Time Machine Backup stopped working. I tried repairing the disk using the Disk Utility program,but got the message that the utility can't repair the disk and to erase and reformat the disk. When
-
where can I download the newest version? Some of the games i used to play does not load now?
-
IPhone 3GS Camera Crashes iOS 4.3 When Device Used In Cold Weather
I was in Chicago today where the weather was in the low 40's (high 20s with the windchill). As I was sightseeing and using my iPhone to shoot casual snapshots, the OS completely crashed when I was trying to take the picture. My iPhone has never crash
-
The fill rate for the ad in my app seems to have plummeted after the 26th of December last month and has remained simply horrible. The ad used to have a fill rate of between 4% and 20%. It has dropped to 0.15%-0.54% since the 26th. All other metrics