Defined crop aspect ratios work only in landscape mode (LR2.1) (Mac, Win)

When I try to use pre-defined or user-defined crop aspect ratios, e.g., 5x7, on a picture in portrait mode, the crop always goes into landscape mode. This makes no sense; PS doesn't do that.
As an interim solution I have been rotating my portrait pictures 90 degrees into landscape orientation just to get the cropping done, and then rotating them back to portrait, but my neck is beginning to hurt. What is the correct method for cropping in portrait mode using pre-defined aspect ratios?

The method I use is to set the ratio, then do not drag from the corner; plop the crop tool inside the edges and draw as you would in PS. Then adjust via edges, corners, etc.

Similar Messages

What is the fix for constarined crop aspect ratio changing when the image is rotated

I've migrated through LR 3, 4 and now 5 up to 5.4. I have been able to set a crop aspect ratio and synch pictures to that ratio as well as other editing selections. When I edit a particular picture and rotate it , the aspect ratio has stayed constant - to the value originally selected.I've never had a problem and it has consistantly worked properly even through last weeks editing activities. Now, when I set aspect ratio and then rotate, the aspect ratio really changes. If I go back and reset aspect ratio and select Done, it seems to be ok. This issue seems to perform wrong with portrait orientation but not in the landscape orientation. I have uninstalled LR, gone through registry cleanup, reinstalled LR, claened up the registry but nothing gets better. I do note that the settings aren't totally removed as the reinstalled software wants to pick up where I left it prior to uninstalling. As best as I can tell, all of my settings and preferences are the same as last week. It works on last weeks folders but not on new ones.
I have now seen many forum write-ups about this problem but have never found any solution. Help - I can't go through life cropping and straightening images sideways.

Here is a thread that I think addresses this problem. There were MULTIPLE bugs in the crop tool when Lr5.0 came out, probably due to adding the Upright Tool, but they are slowly getting worked out. Maybe this one will be fixed in Lr 5.5
http://forums.adobe.com/message/6218903#6218903

Crop Aspect Ratio, width, height, resolution locks up

I am running PSE6 on an XP PC platform.
This anomaly happens about 75% of the time.
After processing a batch of raw images in Camera Raw, highlighting them and clicking on Open Image to open the converted images in PSE, I sometimes find I cannot open the Crop Aspect Ratio selection drop-down box. Nor can I type in changes to Width, Height, and Resolution fields--I can, however change the values by using the sliders that appear when I mouseover the Width, Height or Resolution titles, but even that's limited--whatever is to the right of the decimal point remains unchanged.
I've also experienced this Crop "lock-out" when just opening JPEG/TIFF/PSD images directly from the image file folder.
The only way I have found to clear this anomaly has been to close and reopen PSE. Today, for the first time, that didn't fix the problem. It came up with Crop locked up.
Has anyone else run into this? If so, what, if any, solution is there?
Thanks,
dale

First try clicking the little arrow at the far left of the options bar and choosing reset tool. If that doesn't do it, quit the editor, then restart it while holding down ctrl+alt+shift. Keep holding the keys till you see a window asking if you want to delete the settings file. You do.

Crop Aspect Ratio Lock fails

Lightroom Crop aspect ratio lock no longer remembers the last setting. Everytime it is unlocked. Annoying. Is this a bug in the new version? or is there some new way to define the default state?

an interesting, I think I found the answer on my own
if you hit 'r' for crop, 'a' to toggle aspect ratio lock, then ENTER to apply the crop LR will not remember the apect-ratio lock setting.
You can force it to remember by hitting 'r', toggling the state with 'a', then hitting 'r' again to close the crop tool.
apparently ENTER fails to apply the crop and SAVE the new default state (lock/unlocked)

Synchronizing crop aspect ratio

Using Windows and Lightroom 5.5, I'm no longer able to synchronize a crop aspect
ratio of 2:3 across a series of images. All the other settings I use are synchronized,
but crop aspect keeps reverting to "Original".
I've tried setting it Quick Develop and in Develop. It's worked before, but not now.

an interesting, I think I found the answer on my own
if you hit 'r' for crop, 'a' to toggle aspect ratio lock, then ENTER to apply the crop LR will not remember the apect-ratio lock setting.
You can force it to remember by hitting 'r', toggling the state with 'a', then hitting 'r' again to close the crop tool.
apparently ENTER fails to apply the crop and SAVE the new default state (lock/unlocked)

Notification center only in landscape mode

On my Iphone 4S the notification only works in the landscape mode and not working in the portrait mode (e.g.on the home screen). I've done the "reset" thing - but its still the same. I use the latest iOS. Some help please!

So throughout the forums there are numerous questions but noone posts a clear fix.
I have rounded some of them up here.
https://discussions.apple.com/thread/3377222?start=15&tstart=0
https://discussions.apple.com/message/18483744#18483744
https://discussions.apple.com/message/19921337#19921337
https://discussions.apple.com/message/17569682#17569682

CRM_ORDER_MAINTAIN works only in debug mode

Hi Experts,
I am currently facing a strange issue. I am trying to add a line item to a service ticket, but the code works only in debug mode. Sample code is given below:
lv_product_i-ref_handle = '0000000001'.
lv_product_i-ref_guid = lv_header_guid.
INSERT lv_product_i INTO TABLE lt_product_i.
ls_orderadm_i-header = lv_header_guid.
ls_orderadm_i-itm_type = 'ZSG5'.
ls_orderadm_i-number_int = '0000000010'.
ls_orderadm_i-ordered_prod = 'SERVICEITEM_SG5'.
ls_orderadm_i-handle = '0000000001'.
ls_orderadm_i-mode = 'A'.
ls_orderadm_i-itm_proc_ident = 'SRVC'.
INSERT ls_orderadm_i INTO TABLE lt_orderadm_i.
ls_input_fields-ref_handle = '0000000001'.
ls_input_fields-objectname = 'ORDERADM_I'.
CLEAR ls_field_names.
ls_field_names-fieldname = 'HANDLE'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'HEADER'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'ITM_PROC_IDENT'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'ITM_TYPE'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'MODE'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'NUMBER_INT'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'ORDERED_PROD'.
APPEND ls_field_names TO ls_input_fields-field_names.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
it_product_i = lt_product_i
CHANGING
ct_orderadm_i = lt_orderadm_i
ct_input_fields = lt_input_fields
EXCEPTIONS
error_occurred = 1
document_locked = 2
no_change_allowed = 3
no_authority = 4
OTHERS = 5.
LOOP AT lt_orderadm_i INTO lv_tempvar.
lv_item_guid = lv_tempvar-guid.
ENDLOOP.
The item guid is coming as initial and no item is being added.But if i put a breakpoint in CRM_ORDER_MAINTIAN, then the guid is being generated properly. Any pointers why the code is behaving like this or someone has faced a similar issue before?
Thanks and Regards,
Rohit

Hi Rohit,
The above said is also correct + U have to write
CALL FUNCTION 'CRM_ORDER_SAVE'
    EXPORTING
      IT_OBJECTS_TO_SAVE = GT_OBJ_GUIDS
    IMPORTING
      ET_SAVED_OBJECTS   = GT_SAVED_OBJECTS
    EXCEPTIONS
      OTHERS             = 2.
COMMIT WORK.

CRM_ORDER_MAINTIAN works only in debug mode!

Hi Experts,
I am currently facing a strange issue. I am trying to add a line item to a service ticket, but the code works only in debug mode. Sample code is given below:
lv_product_i-ref_handle = '0000000001'.
lv_product_i-ref_guid = lv_header_guid.
INSERT lv_product_i INTO TABLE lt_product_i.
ls_orderadm_i-header = lv_header_guid.
ls_orderadm_i-itm_type = 'ZSG5'.
ls_orderadm_i-number_int = '0000000010'.
ls_orderadm_i-ordered_prod = 'SERVICEITEM_SG5'.
ls_orderadm_i-handle = '0000000001'.
ls_orderadm_i-mode = 'A'.
ls_orderadm_i-itm_proc_ident = 'SRVC'.
INSERT ls_orderadm_i INTO TABLE lt_orderadm_i.
ls_input_fields-ref_handle = '0000000001'.
ls_input_fields-objectname = 'ORDERADM_I'.
CLEAR ls_field_names.
ls_field_names-fieldname = 'HANDLE'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'HEADER'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'ITM_PROC_IDENT'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'ITM_TYPE'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'MODE'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'NUMBER_INT'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'ORDERED_PROD'.
APPEND ls_field_names TO ls_input_fields-field_names.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
it_product_i = lt_product_i
CHANGING
ct_orderadm_i = lt_orderadm_i
ct_input_fields = lt_input_fields
EXCEPTIONS
error_occurred = 1
document_locked = 2
no_change_allowed = 3
no_authority = 4
OTHERS = 5.
LOOP AT lt_orderadm_i INTO lv_tempvar.
lv_item_guid = lv_tempvar-guid.
ENDLOOP.
The item guid is coming as initial and no item is being added.But if i put a breakpoint in CRM_ORDER_MAINTIAN, then the guid is being generated properly. Any pointers why the code is behaving like this or someone has faced a similar issue before?
Thanks and Regards,
Rohit

Well, during debugging an implicit COMMIT WORK is executed on a regular basis. This might cause the ITEM GUID to be created during debugging.
However, normally, after CRM_ORDER_MAINTAIN, you should use the CRM_ORDER_SAVE as well. This will return a list of SAVED_OBJECTS. If all objects were saved correctly, do an explicit COMMIT WORK.
Works fine for us.....

Function Module working only in debug mode

Hi all,
The following Function Module works only in debug mode. The purpose of this FM is to create a notification and to put it in progress status. If I put a breakpoint before "CALL FUNCTION 'BAPI_ALM_NOTIF_PUTINPROGRESS'" it works. If I execute this FM without putting a breakpoint at that place it creates the notification but doesnt put it in progress status.
In other words, the last BAPI call doesnot work if I dont put a breakpoint before.
Can somebody help me to find out where is the problem?
Thanks,
Younes
FUNCTION ZFM_CREATE_NOTIF_IN_PROCESS.
""Local interface:
*" IMPORTING
*"     VALUE(NOTIFTYP) TYPE CHAR2
*"     VALUE(NOTIFHEADER) TYPE BAPI2080_NOTHDRI
*" EXPORTING
*"     VALUE(NOTIFNUMBER) TYPE CHAR12
*"     VALUE(NOTIFCURSTATUS) TYPE CHAR40
DATA: gs_bapi2080_nothdre TYPE bapi2080_nothdre,
      gt_return TYPE TABLE OF bapiret2.
The notification is created with a temporary number
CALL FUNCTION 'BAPI_ALM_NOTIF_CREATE'
EXPORTING
    notif_type         = NOTIFTYP
    notifheader        = NOTIFHEADER
IMPORTING
    notifheader_export = gs_bapi2080_nothdre
TABLES
    return             = gt_return.
READ TABLE gt_return TRANSPORTING NO FIELDS WITH KEY type = 'E'.
CHECK sy-subrc IS NOT INITIAL.
*The notication will be saved with a number which isnt temporary
CALL FUNCTION 'BAPI_ALM_NOTIF_SAVE'
EXPORTING
    number      = gs_bapi2080_nothdre-notif_no
IMPORTING
    notifheader = gs_bapi2080_nothdre
TABLES
    return      = gt_return.
READ TABLE gt_return TRANSPORTING NO FIELDS WITH KEY type = 'E'.
CHECK sy-subrc IS NOT INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
The Notif is already created, it will be put in progress status
NOTIFNUMBER = gs_bapi2080_nothdre-notif_no.
   CALL FUNCTION 'BAPI_ALM_NOTIF_PUTINPROGRESS'
        EXPORTING
          NUMBER             = NOTIFNUMBER
          LANGU              = SY-LANGU
       IMPORTING
         SYSTEMSTATUS       = NOTIFCURSTATUS
       TABLES
         RETURN             = gt_return.

Hi Emmanuel,
Now I get your problem: you want to wait to have the commit finished! The call to BAPI_TRANSACTION_COMMIT has an optional parameter 'WAIT' which is space by default which causes only a commit. When you set this parameter to 'X' it will do a commit work and wait.
This should solve your problem!
Regards,
John.

How to check for different crop aspect ratios

The problem I'm having is that I have hundreds of images that I need to send to a photo print lab. Before sending off my images I have to make sure they all will fit correctly for 8x10 prints (5:4 aspect ratio) and other ratios but I need to keep them cropped in my camera's default 3:2 aspect ratio for people who want to buy 4x6 prints.
So what I do when I open all my images in Bridge's Camera RAW browser is fit and crop any images that need cropping but using the 3:2 aspect ratio. I then need to check to see if my crop will work as an 8x10 crop picture so that nobody's heads are cut off, etc. The problem Bridge is giving me is that when I crop the first time it doesn't allow me to check another crop without losing the original first crop. For example, I do my first crop as an 3:2 aspect ratio and then when I click on 5:4 to check for 8x10 prints it resizes the crop area which lets me check the crop for 5:4 but when I go back to 3:2 it doesn't go back to the original crop so I have recrop the original crop from memory. Is there any way to solve this problem? Basically crop it twice without loosing the first crop so that I can go back.
Also is there any way to quickly click on all aspect ratios like 5x7, 8x10, etc and have the crop centered in the image so that I can quickly check if anything is cut off? My lab is a high volume automated photo lab so they crop by using the center of each picture and I can only give them one image per person. Most of my images don't need cropping because I try to do it in camera but I have to check to see if they will fit for other crop sizes. Currently Bridge makes me create the crop size manually and then visually center the crop over my image. I would prefer quick buttons that when clicked on will show me what the crop will look like in different crop ratios. Is there anyway to do that?
Thanks for any help you can give me

You might want to try this in Adobe Lightroom (it uses the same Camera Raw
engine as PS and Bridge).
In the develop mode you can use the crop tool with presets and custom
options that works faster and has an easier and better history tool to
retrieve your original crop setting than Camera raw in Bridge and PS has to
offer.
I would prefer quick buttons that when clicked on will show me what the crop
will look like in different crop ratios. Is there anyway to do that?

Cropping aspect ratio changes randomly

Each time I crop a new image, the aspect ratio seems to change randomly. Sometimes it will pop up as "Do Not Constrain." Sometimes it will appear as 4x5. Or 2x3. Etc. You get the idea. I have no idea why it's changing. It's very disruptive to the workflow. Any thoughts on what might be causing this?
I encounter the issue on both my MacBook Pro and my iMac.

Thanks, Stan.
I just posted a draft video on Youtube for a client last night. Not sure if viewing a clip of what I see will help you but I suspect it will.
http://www.youtube.com/watch?v=v_hzhCeCGR0
If you go to about 4:34 in the clip you'll see it change over to a different aspect ratio.
This sequence was exported directly from PPro CS4 to FLV. The FLV file was uploaded to Youtube.
I'm editing this morning and just came across this same issue again.
I'm amazed that none of my clients have mentioned it yet. Of course, I'm not making Hollywood movies - these are just short videos people send out to college coaches.
Thanks,
Dan

Where are crop aspect ratio settings stored?

I have created a few custom aspect ratio settings in the develop module crop tool that I would like to get rid of. These pop up in the bottom section of the "Aspect" popup window right under "Custom". I would like to know of a way to clean this up a bit.

I don't think it's possible - at least not without major surgery.
This has been commented on in previous versions.
I can't think of any other S/W where the user can enter info, and then no way of clearing it.
Steve

Locking / unlocking crop aspect ratio lock

I somehow am missing the magic; I know that one can click on the Develop module's lock to constrain an aspect ratio or to allow free cropping. But how can I set it by default not to be locked? In version 2, I seem to recall that it would end up with a different default for a while till I did something unknown to switch the default. So far in LR 3 beta and LR 3 itself, it always seems to be in locked mode. Thanks for any insight I am missing!
Dilip

Thanks, Hamish, for your kind posting. I am indeed aware that the padlock visually informs about the locking status. I would just like to be able to set a preference to always leave that padlock open, or perhaps leave it as I last set it. Thanks!

Cropping, aspect ratio

most of my crops are set for custom. i want an 8x10 print. if i change the aspect ratio from custom to 4.5/8x10 it screws up my crop completely. that means that i cannot upload to an online website, be printed automatically and have it come out the way it want.
but can that custom crop image be printed 8x10 manually?

i may have just answered my own ?
i went into the print module of LR and checked each of my images and then printed one. the result was my custom crop on an 8x10 sheet of paper with 1 3/4 inch borders top and bottom and 1/4 inch borders on each side.
am new to the digital printing game. without matting it does looks sort of weird. ideally am i supposed to be aiming for equal borders all the way around?
i suppose that you would have to have it custom matted to make it look normal.

Changing cropping aspect ratio

Hi all;
I want to crop a picture not using a standard aspect ratio.
(ie want to change the width (or height) without the other changing.
Any thoughts please.
Thanks Mark

Mark,
set the crop style to "Custom" or to "Do not constrain". Then you can change one dimension without the other dimension changing too.
Regards
Léonie

Defined crop aspect ratios work only in landscape mode (LR2.1) (Mac, Win)

Similar Messages

Maybe you are looking for