Defined Named Ranges Not Showing in Publish Options

Greetings,
First off I have:
- 1 workbook with:
- 10 worksheets with data transpoosed in different manners
- 7 worksheets with charts and named ranges for each worksheet
The 5 chart worksheets have charts based on data directly from the 5 data worksheets. Each chart worksheet contains about 5 uniques charts.
There are separate named ranges defined within each chart worksheet that should encompass each of the different groups of charts on their respective worksheet. The probem I am having is that of the 7 named ranges I have defined only 4 of them show in the
Publish Options when I try to Save & Send the workbook tyo SharePoint. There isn't anything special about the 4 named ranges that show nor is there anything special about the named ranges that don't show. I have tried many different things to
get the named ranges to appear but they won't. I can publish all of the graphs withing the named ranges individually but that's not an ideal way to maintain them going forward. Any ideas on where to look to see why the named ranges are being excluded?
TIA,
MP
I have been able to define named ranges for
I am having an isssue where I hav

Today, I tried it again and now I could see the Name range under Browser View Options list, this is my step as below:
1. Type the value in Cell A1 to B4. (Same as the screenshot as the last reply)
2. Directly type Test in Name Box.
3. Go to File > Info > Browser View options > Items in the Workbook.
Now the Name is appearing.
But when we define a name to a blank range, we would not see the Name in the Browser View options anymore. Try in your site.
By the way, My using version is Office 36 ProPlus, version 15.0.4551.1005.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Similar Messages

No Mirroring in Ipad 2? I have IPAD2 and Apple Tv 4.3. I can airplay videos/music from Ipad2 to my HDTV via ATV, but I cant mirror it. When I select airplay to switch from Ipad2 to Apple TV, Mirroring does not show as an option. What am I missing?

No Mirroring in Ipad 2?
I have IPAD2 and Apple Tv 4.3. I can airplay videos/music from Ipad2 to my HDTV via ATV, but I cant mirror it. When I select airplay to switch from Ipad2 to Apple TV, Mirroring does not show as an option. What am I missing?

That feature is not yet available, it is coming with IOS 5
http://www.apple.com/ca/ios/ios5/features.html

HT2534 It's not showing a none option

It's not showing a none option on my phone plz help

The None option is not available in all Regions and Countries.
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

URL links do not show once published

Links added in PSM do not show once published. The links lists shows and works in preview but fail to appear in iTunes when published.
Ger.

Links added in PSM do not show once published. The links lists shows and works in preview but fail to appear in iTunes when published.
Ger.

Hello Sir i'm from Pakistan my iphone have not show update ios7 option how can i do?

hello Sir i'm from Pakistan my iphone have not show update ios7 option how can i do?

You've been answered multiple times now. Please look at your other posts with this question.
https://discussions.apple.com/people/millerlog4684
Regards.

Excel Named Items not showing up in Browser View Options list

Hi,
Using excel 2013 - when I create named ranges under the 'formulas' tab, I expect to see them show up in the 'show' tab under Browser View options. However they aren't there - when I look at the 'items in the workbook' list I only see the charts and
pivot tables in my workbook, not the named items.
Is there some setting I need to flip on to see these times (and then use them in sharepoint)?
Thanks

Today, I tried it again and now I could see the Name range under Browser View Options list, this is my step as below:
1. Type the value in Cell A1 to B4. (Same as the screenshot as the last reply)
2. Directly type Test in Name Box.
3. Go to File > Info > Browser View options > Items in the Workbook.
Now the Name is appearing.
But when we define a name to a blank range, we would not see the Name in the Browser View options anymore. Try in your site.
By the way, My using version is Office 36 ProPlus, version 15.0.4551.1005.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Why do I not have any publishing options besides MobileMe?

iWeb '08 is not showing any alternative publishing options.

With iWeb 2 (08) the only option now is to publish you site to a folder on your hard drive via the File ➙ Publish to a Folder option
and then upload the site folder and the index.html file to the ftp server with a 3rd party FTP client like YummyLite, Transmit, Cyberduck, etc.
Note: If you plan on upgrading to Mt. Lion know that iWeb 2 is not compatible with it. You will need to upgrade iWeb to Version 3.
OT

Text field not showing record set options

I entered the following php code to a text field in a form:
<p>
      <label for="date">Select Available Date</label>
      <select name="date" class="text" id="date">
        <option value="0" selected="selected">select your preferred travel date</option>
            <?php while ($row_rsDep = mysql_fetch_assoc($rsDep)) {
                  echo '<option>' . date('d.m.Y',strtotime($row_rsDep['Start_Date_Eur'])) . ' - ' . date('d.m.Y',strtotime($row_rsDep['End_Date_Del'])) . '-' . $row_rsDep['Itinerary_Code'] . '</option>';
          ?>
      </select>
    </p>
In the text field it shows only the option=0 "select your preferred travel date" and does not show the rest of the options as available from the database.
Any idea what is wrong with my code?
Thanks,
zabberwan

I do have it showing in the sidebar showing as a repeating region. I commented it out and entered your code, but this time it shows nothing at all, not even an error!
The problem may have to do with "VIEWS" as I am working partly with Views on the external server. The server guys are having problems allowing Views. They did allow it for my account, but somehow this is not working. So I update my database leaving out the 3 tables created as views out of a total of 8. On the contrary on the local server the database is working fine, so that may not be the problem after all.
I had got it work a fortnight back, but lost it as I had to redo a few things with the forms it is in. On the sidebar it is working fine otherwise as a repeating region and showing all the dates of all itineraries. Only it's not working in the form, where it shows the preselected string (select your preferred travel date), but not the rest of the options.
About changing the email, one has to change the whole ID and profile etc. and then you can't log into your own account with the same user name, you have to have a different one, so that your own thread is no longer your own. What a pile of goons at the wheels! And what a disappointment with otherwise such a great bunch of forums.. I'll now have to contact the staff and would like them wipe out all my ID's and Profiles at Adobe and make a new one. It's such a rotten mess. This thing even ruined my ID at Adobe Browser Lab.
I suppose we'll leave it for Mr. Nobody to fix it, like so many other things especially around Christmas!
zabberwan

Itunes 10.2.1 does not show remote speakers option

I have been having a strange issue on one of my laptops. I have two laptops - one with Windows 7 64bit and Windows XP 32 bit. On both laptops, I was able to connect to the airport express to stream music to my home theater (receiver) till a few months back. Both have the latest version of Itunes - 10.2.1. Now, the Windows 7 laptop continues to work fine but the Windows XP laptop is having problems. *Itunes does not show the remote speaker option. The airport utility does not recognize the airport express.* In the Windows Firewall exceptions, there are entries for Bonjour (port 5353 UDP), Bonjour Service (mDNSresponder.exe) and Itunes.exe and all are checked. Even if I disable firewall, it does not resolve anything.
The airport express is connected through an ethernet cable to the Belkin Wireless N router. The wireless mode for the airport express is switched off. The firmware on the airport express is version 6.3.
Few differences between the two laptops
Windows XP: I use a Belking Wireless N Notebook card to connect to the Belkin Wireless N Router. Antivirus is "McAfee VirusScan Enterprise + Antispyware Enterprise 8.7.0i"
Windows 7: I use the inbuilt wireless to connect to the same router. Antivirus is "ESET Smart Security 4.0"
Can someone help? I have researched the forum and tried the following things but still does not help.
1. Tried uninstalling Itunes and Airport Utility and reinstalling
2. Tried disabling Windows Firewall

I solved my problem I tried several other programs to play my music and since nothing seemed to work, i started deleting other software from my computer and apparently Uniblue's RegistryBooster was the one that caused the problem. Now able to enjoy music from my computer again

History - recent history -time range not showing

Hi i have a problem with clearing my recent history.
The problem is my time range to clear is buged and not showing.
I tried with reinstalling firefox and clearing all settings but it didn't help.
So i decided to write here for some help.
Thanks

I've installed the Bulgarian Firefox version and I see the same small Clear Recent History window.
The DOM Inspector shows a width of 14em and that is really too small compared to what I get with the en-US version (width: 34em).
Add code to the userChrome.css file below the default @namespace line to increase the default width.
*http://kb.mozillazine.org/userChrome.css
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#SanitizeDialog {width: 34em !important;}</nowiki></pre>
See:
*view-source:chrome://browser/locale/sanitize.dtd
Sounds that something got wrong here and maybe a bug should be filed:
<pre><nowiki>
<!ENTITY dialog.width2 "14em"> (shouldn't this be at least 28em ?)
<!ENTITY column.width2 "14em"></nowiki></pre>
The sanitize.dtd in the en-US locale:
<pre><nowiki>
<!ENTITY dialog.width2 "34em">
<!ENTITY column.width2 "17em"></nowiki></pre>

OWB is not showing some default options like contol center,import/export

Oracle (11.2.0.1.0) databse is installed on linux.
it is successfully installed on linx.
when i am trying to login to OWB GUI with owbowner/owbwoner.it is opend successfully.
1)when i right click on that 'MY_PROJECT' it is not showing any options like NEW,validate,import/export .
2)Under TOOL tab,control centre is not showing
3)Under TOOL tab,in preferences,it not showing OWB Environment properties
Like this way lot of default options are not showing.
Can anybody help on this issuue........?
Edited by: krishna on Dec 24, 2011 12:48 AM

Oracle (11.2.0.1.0) databse is installed on linux.
it is successfully installed on linx.
when i am trying to login to OWB GUI with owbowner/owbwoner.it is opend successfully.
1)when i right click on that 'MY_PROJECT' it is not showing any options like NEW,validate,import/export .
2)Under TOOL tab,control centre is not showing
3)Under TOOL tab,in preferences,it not showing OWB Environment properties
Like this way lot of default options are not showing.
Can anybody help on this issuue........?
Edited by: krishna on Dec 24, 2011 12:48 AM

Finder option not showing all the options

Hi, the finder option in MAC shows "mobile partner" when plugged on to internet...it does not show other options like folder, documents, drives etc. Can anyone please tell me how to access these drives and folders through finder when the internet is ON.

Welcome to Discussions, HaylieFoxe
HaylieFoxe wrote:
On Flash bashed chat rooms such as Stickam and Tinychat, my camera doesn't respond but when I right click>settings >Camera the drop down box only shows one option (Built-in iSight) when it usually shows three (Built in iSight, USB Class Video and Something else that slips my mind right now.)
Screen shot: http://i983.photobucket.com/albums/ae318/KaitheHeartless/Picture2.png
Can anyone tell me how to fix this?
Thanks for the help! ...
Try the suggestions offered in this recent topic on the same subject:
http://discussions.apple.com/message.jspa?messageID=12717402
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Presenter 10 - theme info not showing in published video

Using Presenter 10 - when I publish a video using powerpoint my theme with presenter info and selected panes does not show. I start by going to power point and creating a custom theme within the presenter tab and check the presenter info and panes I want to show and press ok. I then hit record and it sends me to adobe presenter video express. I record the video and publish the project. However no theme shows in the final published video. Maybe adobe presenter was not meant to show theme information in a published video?
Thanks for any help

Presenter Video Express (APVE) does not use the theme for the PPT output. If you embed the MP4 in a PPT slide using Presenter, then publish it out it will have the theme wrapper around the PPT content, which contains your APVE video.
If you want to customize the theme in the APVE you can do that when editing your video in that tool.

Xml menu not showing in published html

Hi all my problem is that when iam trying to publish an flash
project containing a dynamic xml menu as html file ,the menu is not
showing although it is showing in the accompannying swf file,any
body knows the problem??

There is not enough here to know what you are doing.
Flash reads XML fine. You can then use that XML inside of
Flash to create menus (or any UI thing) using Flash objects such as
MovieClips and TextFields.
You will not be able to create HTML based menus as Flash does
not handle more than a few HTML tags via the TextField object.

HT1222 Software update option not showing in settings option of my iPad 2

Software Update option not showing in settings of my iPad 2

Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/e0f22e92de98ebae10e 3fd537c16619e.jpg

Defined Named Ranges Not Showing in Publish Options

Similar Messages

Maybe you are looking for