Defined pattern is not covering the whole image

I want to use the Pattern Stamp tool to clone a painting effect from a photograph to a new layer.
What I am finding is that the pattern is perfectly replicated on the new layer except that a thin strip of the sky is appearing at the bottom of the image. It seems like a strip of the top of the image is appearing at the bottom of the new layer version
I am selecting the whole area of the source image before defining the image as a pattern. It is not a problem of the "Aligned" setting - that is always selected.
Grateful for any ideas as to what is going on.
Thanks..

Does the layer with the painting effect have transparency in the layer at the top or bottom or is the effect layer smaller in size than the document bounds?
If your using the pattern stamp on another image and the image has bigger pixel dimensions, then then the pattern will start to repeat.
Maybe you could post a screenshot incuding the layers panel.
added:corrected spelling error
Message was edited by: R_Kelly

Similar Messages

IPad retina via iOS simulator can not display the whole image (2048x1536)

Hi,
I am developing cartoon ebooks with iOS simulatort 7.0. The target device is iPad retina. I use the image whose size is 2048x1356. After building by iOS simulator--iPad retina, only center part of image was displayed. I hope to show the whole image with simulator, how should I do?
Thanks!

You would do better to ask your question on the developers' forum. We are but simple users here....

Why can't I see the whole image?

I can not see the whole image in the viewing area. All I get is a partial rectangular section, with the rest being either white, or checkerboard. It doesn't matter what size the image is, nor how many layers, or even whether I use the 32 or 64 bit versions of the software. I even have the same problem when I create a new image from scratch. It doesn't matter whether I reboot the system either.
I am using Windows Vista, on a two year old machine, but it does have a powerful processor, and 4GB of RAM. I've checked the system resources, and the CPU is only 25% occupied with 2GB or RAM to spare... so what gives?

You need an updated display driver.
Go to the web site of the maker of your video card (not Microsoft), and locate their current release for your hardware and OS. Download and install, and it will almost certainly solve this issue.
-Noel

Firefox covers the whole screen so I can not see other programs opened at the bottom of screen

firefox covers the whole screen so I can not see other programs opened at the bottom of screen

It is possible that the screen is too high and that the status bar and scroll bar fall off at the bottom.
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
* http://kb.mozillazine.org/Corrupt_localstore.rdf

I'm editing a wedding that I shot for a family member but when I play it in the viewing window the top of it is cropped off but I can see the whole image in the project strip. will the whole image transfer when I make a dvd or will it crop the top ?

I'm editing a wedding that I shot for a family member, But when I play it the top of the image is cropped off in the veiwing window but it shows the whole image in the project strip. When I make a DVD with it transfer the whole image or will it be the chopped off image and how do I make sure it is the whole image ?

What version of iMovie are you using?
For 9.09..
If the image is not 720p, you might have to crop it to have freehand control over which bit gets cut off.
How to crop it...
In the project window hover your cursor over a section of the clip in the bottom right corner as seen below:
Click on the cog and open up Cropping,Ken Burns and Rotation.
Click on Crop and drag and set to where you want it to be cropped, then click Done. (Because mine isn't 720p, iMovie automatically makes it so I cannot include the black border. If you do not mind this click Allow Black.)
Glad if this helped! Please rate up.

Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense...

Not printing the whole page

the printer is not printing the whole page it is cutting the right side
hp photosmart 7520

My HP Photosmart model 5520 is only printing part of a page.

Windows 8.1, BootCamp does not find the ISO image.

When I try to install Windows 8.1, BootCamp does not find the ISO image.
I purchased Windows 8.1 Pro, I downloaded the .exe requested file from a Windows computer, performed the steps recommended by Microsoft in order to create the ISO file saving it on a flash drive as well and, as a precaution, on a DVD too.
I performed the "Download the latest Windows Support Software from Apple" step directly into another flash drive and having it completed BootCamp displays the following message:
"The installer disc could not be found – Insert the Windows installer disc and wait a few seconds for the disc to be recognized. "
So happens that I have tried this using the DVD, pendrive and also copying the ISO file to the desktop and to the "Documents" folder as recommended in certain websites, but none of this has made the process go ahead. What can I do?
My equipment is a mid 2011 iMac running Mac OSX 10.10.1.

Dear Loner T,
thanks to my coworker, the solution was unpacking from that ISO file which I had recorded (according to the steps indicated by Microsoft), but now using Nero software (Windows) and then recording by the most common way in a new DVD. See the screen of the first DVD before unpacking:
This true saga only demonstrated that the generated ISO file as an option at the time of the Windows installation, is not for direct installation through BootCamp, and as a I could check, even for direct installation on a Windows PC. See the last DVD burned using Nero and again recorded:
The execution of BootCamp, was perfect
Thank you for attention to my problem!

Why can I not check the 'shuffle images' box in a slide show settings in iPhoto 9.6?

Why can I not check the 'Shuffle images' box in settings of a slide show in iPhoto 9.6? All other settings I can check but this one.

Hey Brad,
If you are unable to select the shuffle images checkbox, follow the steps in this article -
iPhoto '11: Change slideshow settings
Specifically -
To display slides in random order, select “Shuffle slide order.” If you don’t see this option, play the slideshow, move the pointer to make the slideshow controls appear, and then click the Settings button.
Thanks for using Apple Support Communities.
Be well,
Brett L

How do I extend my WiFi with Airport Express? I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work.

I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work. I have tried to get it into my network and it get connected via the WiFi but not the Ethernet. Also when it gives a green light I cannot see that it is giving any signals to my devices (iPhone etc).

You need to pay attention to something, while extending your network with the latest AirPort Express upgrade, your devices will be connected to it except your iPhone, you'll see your iPhone always connected to the capsule instead, even if you're at 1 foot from the AirPort Express.
You need to change the radio settings from automatic to 802.11a - 802.11b/g on your capsule, then I put it back to the default settings...
Now in the AirPort utility you should see your iPhone connected to the AirPort

How to fit to size to show the whole image in image display?

HI, I am using a control palette to display my video images using image display. However, the size is alway out of proportion. How do i show the whole image in the small box screen size. Basically how to fit to size for the images?
Solved!
Go to Solution.

This should do the trick:
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What should I do?

My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
Thanks !!
Alain

Could that read " . . . could not access . . ."? If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here.

Some PDF files and other emails do not display the whole page. Is there a way to change that?

Some PDF files and other emails do not display the whole page. Is there a way to change that?

If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

TS1362 When I purchased a song on itunes, for some reason it did not download the whole song. How can I re-download the song without having to re-pay?

When I purchased a song on itunes, for some reason it did not download the whole song. It quits about 1 and 1/2 minutes through the song. Is there a way I can re-download the song without re-paying for it?

were you able to solve this problem??

I have Lightroom 3.6 and it does not recognize the raw images from my Canon 7d mark II, suggestions?

I have Lightroom 3.6 and it does not recognize the raw images from my canon 7d mark II, suggestions, do I need to upgrade?

Yes, you need an upgrade for native support in Lightroom. You need version 5.70 or higher; current version is 5.71.
Alternatively, you could use the most recent DNG converter and convert the raw files to DNG files before importing into Lightroom.

Defined pattern is not covering the whole image

Similar Messages

Maybe you are looking for