Defining a batch specification in batch mode

Hi All,
I'm interested in what the batch specification actually does, as there is very little info out there.
What happens if I define a new batch spec while already in the batch model? for example if I create 4 sockets and set 2 of them up with a different batch spec how will they behave.
I've been having troubles calling subsequences in the batch model and the solution I came to was to create new batch specs for each thread (all threads might run different subsequences). I'm really just trying to find out as to why this worked
Any info would be much appreciated

If all of your threads are running different sequences then it doesn't really make sense to use the batch model. Instead you should probably just use sequence call steps that call the subsequences in a new thread or new execution from your main sequence and just use the sequential model. Perhaps if you explain in more detail what you are trying to do, I can offer a better suggestion.
Hope this helps,
-Doug
Message Edited by dug9000 on 03-17-2010 10:45 AM

Similar Messages

How to add print buttons in teststand batch mode

Does anyone know how to add "print test report" buttons to the final test status dialog box in TestStand batch mode?. It would be nice to have a print button for each DUT and also a "print all" button to print all of the reports for the batch.

Hi Hollister,
I found this example program titled "Programmatic Printing of TestStand Reports - Modular". It should give you some of the functionality you need while giving you a good springboard to customize it for your specifications.
Cheers,
KyleP
Applications Engineer
National Instruments

How to Ouput data in Excel format in Batch mode?

Hello, I would like to know how can I write a file in Excel format to Unix box in Batch mode using ABAP. Is it possible?
Currently, we are generating this Excel file in foreground using the FM "XXL_SIMPLE_API".
Your help will be appreciated.

Hello Sam,
in the batch mode it is impossible to use OLE as it requires frontend connection, in this case you can use transformation instead. It means you call some transformation which is created by you according to your specific requirement, the source of transformaton is ABAP internal tables, and the output is xml source, and when you save the xml source as .xls file to your local PC and double click it, it will be opened by excel. You can read the wiki below, it is very helpful.
http://wiki.sdn.sap.com/wiki/display/Snippets/XMLXLStransformation
Best Regards,
Jerry

To run a program in batch mode

I have to creaet a program to run in batch mode to update anln1 and anln2.
selection screen : company and cost center.
I have to read z table
update anln1 and anln2 ( from table anla )
Can anybody help me how to write a program in batch mode and update....

Hi,
Write the entries logic with the condidtion like below.
after selecting the required data,
if sy-batch = 'X'.
Now update the required table.
endif.
Even you can put the select statement also after if condition.
now go to SM36 and define the Job with Program name or any other name.
Under Job condition select the execution mode/time of your program.
As you have mentioned the sy-batch condition , your program will work only for Back ground mode.
Hope it helps you.
Kind Regards,
Ravi Sankar.Z

Allow Bridge to work in Batch mode

Whenever you go into a new photo directory, Bridge has to go through a laborious process of building the thumbnails and creating the huge file "droppings" called Adobe Bridge Cache.bc and .bct (note, these "droppings" stay around taking up space, so assuming they're important, why not let them be created in batch mode?
In other words, why not be able to point Bridge at a directory called "Photos" or something, and tell it to go find the files in every folder/subfolder, create the "droppings" and not make people wait so long to get into a new directory the first time. I would much rather tell Bridge to go to work and come back an hour later and find out that I can now go from one directory to another without paying the penalty real time.
Seems logical to me.
Is there anything that can be done about the size of the "droppings" Bridge leaves behind? I'm looking at one that's 20MB right now, and I've seen them much larger on my system. I sure don't want to have to back them up in every directory unless absolutely necessary.
Thanks for the consideration.

Have you tried Tools > Cache > Build Cache for SubFolders?
You can point it to your collection and let it go build it's 'droppings'.
Since you didn't find this feature - is there a way we can make this more accessible to more users?
Another approach is to have background indexing process that runs independent of Bridge and watches specific folders. Personally I am not a big fan of background apps - but maybe this feature would be user controlled: run always, run only when Bridge is running, run manually.
Gunar

Module Pool in Batch Mode

Hi
Can I run module pool program in batch mode....
If so how.... can anyone help me out.....
Thanks
Jay

hI,
Yes sure I need the help..... how to run in batch process this progra,/// can I go direct and define in sm36 or so....
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
Program
PROGRAM ZASSET .
tables: anla,zasset.
constants :
                         C_O(1) TYPE C VALUE 0,
C_INSERT(10) TYPE C VALUE 'INSERT'.
DATA: IT_ZASSET LIKE ZASSET.
DATA:   V_emp_exist(1) type c,
                                V_ANLN1 like zASSET-ANLN1.
*--For Pf status
data: begin of it_pf occurs 0,
       stat(8) type c,
      end of it_pf.
DATA: SAVE TYPE C,
       DELETE TYPE C,
       CLEAR TYPE C,
       EXIT TYPE C,
       BACK TYPE C,
       CANCEL TYPE C,
       OK_CODE LIKE SY-UCOMM.
*&      Module EXIT INPUT
      text
MODULE EXIT INPUT.
case sy-ucomm.
when 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " EXIT INPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE. "OK_CODE.
WHEN 'INSERT'.
IF NOT ZASSET-ANLN1 IS INITIAL.
MOVE ZASSET-ANLN1 TO IT_ZASSET-ANLN1.
ENDIF.
WHEN 'SAVE'.
MOVE IT_ZASSET-ANLN1 TO ZASSET-ANLN1.
INSERT INTO ZASSET VALUES IT_ZASSET .
COMMIT WORK.
CLEAR IT_ZASSET.
*REFRESH IT_ZASSET.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
*APPEND IT_ZASSET.
*CLEAR ZASSET.
     leave to screen 200.
*ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
&      Module STATUS_0100 OUTPUT
        text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ASSET'.
SET PF-STATUS 'POOL'.
SET TITLEBAR 'UPDATING ZASSET TABLE'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module exitscreen INPUT
      text
MODULE exitscreen INPUT.
Case OK_CODE. "_100.
    WHEN EXIT.
      Leave to screen 0.
    when BACK.
      Leave to screen 0.
    when CANCEL.
      Leave to screen 0.
Endcase.
ENDMODULE.                 " exitscreen INPUT
*&      Module USER_COMMAND_0200 INPUT
      text
*OK_CODE = SY-UCOMM.
*MODULE USER_COMMAND_0200 INPUT.
*Case OK_CODE.
When 'MODIFY'.
Perform move_values.
Perform lock_table.
Perform change_dbase.
Perform unlock_table.
Message s999(z1) with text-001.
Leave to screen 100.
When SAVE.
Perform move_values.
Perform lock_table.
Perform insert_dbase.
Perform unlock_table.
Message s999(z1) with text-002.
Leave to screen 100.
When c_delete.
Perform move_values.
Perform lock_table.
Perform delete_dbase.
Perform unlock_table.
Message s999(z1) with text-003.
Leave to screen 100.
When EXIT.
*Endcase.
*ENDMODULE.                 " USER_COMMAND_0200 INPUT
*&      Form check_emp_exist
      text
--> p1        text
<-- p2        text
FORM check_emp_exist.
Clear IT_ZASSET-ANLN1.
Move zASSET-ANLN1 to IT_ZASSET-ANLN1.
Clear zASSET.
Select single * from zASSET where ANLN1 = IT_ZASSET-ANLN1.
If sy-subrc ne 0.
    Clear v_emp_exist.
Else.
    Clear zASSET.
    Select * up to 1 rows from ztrytxn where empno = v_empno.
    Endselect.
    Move : ztrytxn-valfr to v_date,
               C_x to v_emp_exist.
Endif.
ENDFORM.                    " check_emp_exist
*&      Form move_values
      text
--> p1        text
<-- p2        text
*FORM move_values.
**MOVE ZASSET-ANLN1 TO IT_ZASSET-ANLN1.
**MOVE IT_ZASSET-ANLN1 TO ZASSET-ANLN1.
**MOVE ZASSET-ANLN1 TO IT_ZASSET-ANLN1.
*MOVE IT_ZASSET-ANLN1 TO ZASSET-ANLN1.
*INSERT INTO ZASSET VALUES IT_ZASSET.
*COMMIT WORK.
**MODIFY ZASSET . "INDEX SY-TABIX. " FROM TABLE IT_ZASSET1 .
**COMMIT WORK.
**LEAVE TO SCREEN 100.
*ENDFORM.                    " move_values
ENDFORM.                    " change_dbase
*&      Form delete_dbase
      text
--> p1        text
<-- p2        text
FORM delete_dbase.
Delete zASSET from IT_ZASSET-ANLN1.
Commit work.
ENDFORM.                    " delete_dbase
*&      Module check_BUKRS INPUT
      validating bukrs
MODULE check_BUKRS INPUT.
if zasset-bukrs <> 0.
    Message e999(z1) with text-005.
Endif.
ENDMODULE.                 " check_BUKRS INPUT

Scripting with Automate Batch mode

Recently I've been running scripts on lots (1000+) files by putting the script in a action and then applying that action to a load of subdirectories in Automate Batch mode.
The script work fine, but I was wondering if is possible to control the way the script is controlled within the batch mode; to be more specific this is what I had in mind: Alter the history and cache levels to a minimum, start a timer, run the image processing script on all the 1000+ files, write the timer result to a text file, put the history and cache levels to how they were previously and finally close down photoshop when the whole thing is finished.
Cheers

If you look about 6 posts down the list you will find Paul's function to recurse folder contents… Swap your batch action for that… Then you just need to get date twice do a little math…
var start = new Date();
$.sleep( 2000 ); // do all your stuff between replacing this…
var end = new Date();
alert( 'Seconds: ' + (end-start)/1000 );
Your timings are milliseconds… I just divided to get seconds… You may want something other…

Can GATP work in batch mode

Hi all,
Can GATP work in batch mode i.e. all salesorders for a location/product has to go for availability check of stock in one batch.
For example, stock of Product A @ Loc A is 90 EA. 10 customers have ordered the same product. In this case i want to run the availability check of all orders in one batch so that all customers will starved equally.
Please let me know if we can run GATP in batch mode for availability check.
Thanks for help in advance.
Regards,
Sanjog

You can schedule BOP in batch mode by tocde :
/SAPAPO/BOP - Backorder Processing in the Background
In this you can use filter to pull all the material/location as per your selection, can define filter in IMG or S_AP9_75000212 - Filter Type .
Also you can sort orders as per customer by special sorting rule.
S_AP9_75000183 - Special Sorting
Manish

Download created XML File in batch mode // Parse XML file into single lines

Hello!
I upload a CSV file and based on that CSV file I create an XML "object". First I uploaded and downloaded it via gui frontendclass, but as it has to be run in a batch in the night I need to upload and download the data via OPEN DATASET.
The import and transformation of the CSV file works fine, also the transfer into an itab with the same structure as a CSV line is ok. I also create the XML file, which could be downloaded easily with gui-download but it is not permittet.
Import of data: I scan the folder and get the filenames into a itab, I loop over that itab and read the single files like this:
     OPEN DATASET ls_convert_batch FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      CLEAR tab.
      IF sy-subrc = 0.
        DO.
          READ DATASET ls_convert_batch INTO line.
          IF sy-subrc <> 0.
            EXIT.
          ELSE.
            CLEAR tmptab.
            SPLIT line AT ';' INTO tmptab-product
                                    tmptab-contract
                                    tmptab-extagent.
            APPEND tmptab TO tab.
          ENDIF.
        ENDDO.
      ENDIF.
The XML file has a strucutre like
<file>
- <file formant_no="1.1" format_date="02.10.2003">
<status>V</status>
<number>001001025</numbner>
<name>Schmeisser,Christof</name>
- <details>
-    <detail>
         <contract>00000003494</contract>
         <name>Schmeisser, Christof</name>
         <invoice_no>000000003840</invoice_no>
         <due_date>20100601</due_date>
         <amount>140,00</amount>
     </detail>
-    <detail>
         <contract>00000003495</contract>
         <name>Schmeisser, Christof</name>
         <invoice_no>000000003841</invoice_no>
         <due_date>20100601</due_date>
         <amount>130,00</amount>
     </detail>
- </details>
<elements>2</elements>
<amount_overall>270</amount_overall>
</file>
At the moment I download it like this:
CALL METHOD cl_gui_frontend_services=>gui_download
        EXPORTING
          bin_filesize = l_xml_size
          filename     = filename
          filetype     = 'BIN'
*        CONFIRM_OVERWRITE = '0'
        CHANGING
          data_tab     = l_xml_table
        EXCEPTIONS
          OTHERS       = 24.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSEIF sy-subrc = 0.
        lv_create_counter = lv_create_counter + 1.
      ENDIF.
But I need to download it via OPEN TRANSFER CLOSE Dataset as it has to run in batch mode.
Anyone has an idea? I am really desperate here. One idea would be to parse the single lines into a string and then create the XML file line by line as text and save it with ending XML, should work. But I don't know how!
Thank you very much in advance,
kind regards from Tallinn, Estonia,
Christof!
Edited by: Christof Schmeisser on Nov 25, 2010 7:51 PM
I edited the heading, would be too general and missleading!

Tipos Pools
TYPE-POOLS: ixml.
CLASS cl_ixml DEFINITION LOAD.
TYPES: BEGIN OF xml_node_type,
         node   TYPE char50,
         vlnode TYPE string,
       END OF xml_node_type,
       BEGIN OF xml_line_type,
         data(256) TYPE x,
       END OF xml_line_type.
Tabelas Internas
DATA: ti_xml_node        TYPE TABLE OF xml_node_type.
Variáveis TYPE REF
*Type REF para utilizar no XML
DATA: ixml_type             TYPE REF TO if_ixml,
      streamfactory_type    TYPE REF TO if_ixml_stream_factory,
      ostream_type          TYPE REF TO if_ixml_ostream,
      istream_type          TYPE REF TO if_ixml_istream,
      parser_type           TYPE REF TO if_ixml_parser,
      renderer_type         TYPE REF TO if_ixml_renderer,
      document_type         TYPE REF TO if_ixml_document,
      encoding_type         TYPE REF TO if_ixml_encoding,
      node_type             TYPE REF TO if_ixml_node,
      element_dtrans_type   TYPE REF TO if_ixml_element,
      element_xml_in_type   TYPE REF TO if_ixml_element,
      element_roteiros_type TYPE REF TO if_ixml_element,
      element_roteiro_type TYPE REF TO if_ixml_element,
      element_vias_type     TYPE REF TO if_ixml_element,
      element_via_type      TYPE REF TO if_ixml_element,
      element_dummy_type    TYPE REF TO if_ixml_element,
      gw_xml_node           TYPE TABLE OF xml_node_type,
      gw_xml_node_ret       TYPE TABLE OF xml_node_type,
      gw_xml_node_err       TYPE TABLE OF xml_node_type,
      gw_xml_node_xml       TYPE TABLE OF xml_node_type,
      gw_xml_table          TYPE TABLE OF xml_line_type,
      gw_xml_table2         TYPE TABLE OF xml_line_type,
      gs_xml_node           TYPE xml_node_type, "WA para leitura do xml
      gs_xml_node_ret       TYPE xml_node_type, "WA para leitura do xml retorno
      gs_xml_node_err       TYPE xml_node_type, "WA para leitura do xml erro
      gs_xml_node_xml       TYPE xml_node_type, "WA para leitura do xml info sucesso
      gs_xml_table2         TYPE xml_line_type. "WA para importar xml
Variáveis do Programa
DATA: l_value              TYPE string,
      l_rc                 TYPE i,
      l_xml_size           TYPE i,
      cod_cartaorepom      TYPE char20 VALUE '123456789',
      v_caminho_exp        TYPE string VALUE 'C:TEMP',
      v_salvaarquivo       TYPE string,
      v_nomearquivo        TYPE string,
      w_nodetext           TYPE string,
      v_roteiros           TYPE string,
      v_roteiro            TYPE string,
      v_roteiro_codigo     TYPE string,
      v_percurso_codigo    TYPE string,
      v_percurso_descricao TYPE string,
      v_cidade_origem      TYPE string,
      v_estado_origem      TYPE string,
      v_cidade_destino     TYPE string,
      v_estado_destino     TYPE string,
      v_transporte_tipo    TYPE string,
      v_cartao_taxa        TYPE string,
      v_cobra_taxa         TYPE string.
Constants
CONSTANTS: cc_39         TYPE string VALUE '39', " Numero 39.
           cc_dt_trans   TYPE string VALUE 'data_transfer'," document_type(name)
           cc_metodo_cod TYPE string VALUE 'metodo_codigo'," document_type(name)
           cc_xml_in     TYPE string VALUE 'xml_in'," document_type(name)
           cc_ct_tx_ativ TYPE string VALUE 'cartao_taxa_ativacao'," document_type(name)
           cc_cartao     TYPE string VALUE 'cartao', " Parâmetro Perform.
           cc_xml        TYPE string VALUE '.XML'," extenção
           cc_bin        TYPE char10 VALUE 'BIN'." filetype
START-OF-SELECTION.
PERFORM yf_inicia_criacao_xml USING cc_39.
element_roteiro_type = document_type->create_simple_element(
                 name   = cc_ct_tx_ativ
                 parent = element_xml_in_type ).
PERFORM yf_dummy_roteiro USING cod_cartaorepom cc_cartao.
PERFORM yf_finaliza_xml.
PERFORM yf_exporta_xml USING v_caminho_exp.
PERFORM yf_convert_xml_to_itab TABLES gw_xml_node_ret
                                  USING v_salvaarquivo.
END-OF-SELECTION.
*&      Form yf_inicia_criacao_xml
      text
     -->VALUE(P_0783) text
FORM yf_inicia_criacao_xml USING value(p_0783).
DATA: s_encoding_type TYPE string VALUE 'ISO-8859-1'.
Cria o ixml factory
ixml_type = cl_ixml=>create( ).
*Cria o objeto com modelo
document_type = ixml_type->create_document( ).
*Cria o cabeçalho encoding="iso-8859-1"
encoding_type = ixml_type->create_encoding( byte_order = 0
                    character_set = s_encoding_type ).
*Cria o root "DATA_TRANSFER"
element_dtrans_type = document_type->create_simple_element(
                name = cc_dt_trans
              parent = document_type ).
*Cria o node "METODO_CODIGO" e preenche com um valor passado no L_VALUE
l_value = p_0783.
CONDENSE l_value.
element_dummy_type = document_type->create_simple_element(
                name = cc_metodo_cod
               value = l_value
              parent = element_dtrans_type ).
*Cria o node "XML_IN"
element_xml_in_type   = document_type->create_simple_element(
              name   = cc_xml_in
              parent = element_dtrans_type ).
ENDFORM.                    " yf_inicia_criacao_xml
*&      Form yf_dummy_roteiro
      text
     -->VALUE(P_0996) text
     -->VALUE(P_0997) text
FORM yf_dummy_roteiro USING value(p_0996)
                            value(p_0997).
l_value = p_0996.
CONDENSE l_value.
element_dummy_type = document_type->create_simple_element(
                name = p_0997
               value = l_value
              parent = element_roteiro_type ).
ENDFORM.                    " yf_dummy_roteiro
*&      Form yf_finaliza_xml
      text
FORM yf_finaliza_xml.
*Cria o stream factory
streamfactory_type = ixml_type->create_stream_factory( ).
*Conecta a internal table de XML com o stream factory
ostream_type = streamfactory_type->create_ostream_itable( table = gw_xml_table ).
CALL METHOD ostream_type->set_encoding
    EXPORTING
      encoding = encoding_type.
*Rendering the document
renderer_type = ixml_type->create_renderer( ostream = ostream_type
                                        document = document_type ).
l_rc = renderer_type->render( ).
*Salva o documento XML
l_xml_size = ostream_type->get_num_written_raw( ).
ENDFORM.                    " yf_finaliza_xml
*&      Form yf_exporta_xml
      text
     -->VALUE(P_0783) text
FORM yf_exporta_xml USING value(p_0783).
CONCATENATE cod_cartaorepom
              sy-datum
              sy-uzeit
              cc_xml
         INTO v_nomearquivo.
CONCATENATE p_0783
              v_nomearquivo
         INTO v_salvaarquivo.
TRANSLATE v_nomearquivo TO UPPER CASE.
*Exporta o XML
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
      bin_filesize = l_xml_size
      filename     = v_salvaarquivo
      filetype     = cc_bin
    CHANGING
      data_tab     = gw_xml_table
    EXCEPTIONS
      OTHERS       = 24.
IF sy-subrc = 0.
   PERFORM yf_sapgui_progress_indicator USING cc_msg_xml_ok.
ELSE.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " yf_exporta_xml
*&      Form yf_convert_xml_to_itab
      text
     -->P_GW_XML_NODE_RET text
     -->P_FILENAME         text
FORM yf_convert_xml_to_itab TABLES p_gw_xml_node_ret LIKE gw_xml_node
                            USING p_filename.
DATA l_count.
ixml_type = cl_ixml=>create( ).
Now Create Stream Factory
streamfactory_type = ixml_type->create_stream_factory( ).
CALL METHOD cl_gui_frontend_services=>gui_upload
    EXPORTING
      filename   = p_filename
      filetype   = cc_bin
    IMPORTING
      filelength = l_xml_size
    CHANGING
      data_tab   = gw_xml_table2
    EXCEPTIONS
      OTHERS     = 19.
IF sy-subrc = 0.
    istream_type = streamfactory_type->create_istream_itable( table = gw_xml_table2
                                                        size = l_xml_size ).
    document_type = ixml_type->create_document( ).
    parser_type = ixml_type->create_parser( stream_factory = streamfactory_type
                                     istream         = istream_type
                                     document        = document_type ).
    IF parser_type->parse( ) NE 0.
      IF parser_type->num_errors( ) NE 0.
        l_count = parser_type->num_errors( ).
      ENDIF.
    ENDIF.
    CALL METHOD istream_type->close( ).
    CLEAR istream_type.
    node_type = document_type.
    PERFORM yf_get_data USING node_type.
    p_gw_xml_node_ret[] = gw_xml_node[].
    CLEAR gw_xml_node[].
ENDIF.
ENDFORM.                    " yf_convert_xml_to_itab
*&      Form yf_get_data
      text
     -->VALUE(X_NODE) text
FORM yf_get_data    USING value(x_node) TYPE REF TO if_ixml_node.
DATA: indent      TYPE i.
DATA: ptext       TYPE REF TO if_ixml_text.
DATA: string      TYPE string.
DATA: temp_string(100).
CASE x_node->get_type( ).
    WHEN if_ixml_node=>co_node_element.
      string = x_node->get_name( ).
      w_nodetext = string.
      CLEAR string.
      string = x_node->get_value( ).
      IF NOT w_nodetext IS INITIAL OR
         NOT string IS INITIAL.
        gs_xml_node-node   = w_nodetext.
        gs_xml_node-vlnode = string.
        IF NOT gs_xml_node-vlnode IS INITIAL.
          APPEND gs_xml_node TO gw_xml_node.
          CLEAR gs_xml_node.
        ENDIF.
      ENDIF.
ENDCASE.
Get the next child
x_node = x_node->get_first_child( ).
Recurse
WHILE NOT x_node IS INITIAL.
    PERFORM yf_get_data USING x_node.
    x_node = x_node->get_next( ).
ENDWHILE.
ENDFORM.                    "yf_get_data

Help needed in consuming BTQueryAUI query in batch mode

Hi Friends,
I am trying to consume BTQueryAUI in a custom function module. I have a requirement where in when i receive a external ref nbr, i need to update the status of crm service request to completed. We have already built logic to store the external nbr info in AET field on Service request and enhance inbox search to take give the results accordingly. now when i try to consume the query service with standard query parameters in batch mode..its not working..
REPORT ZTEST_CSOCRM.
DATA : ob_oref           TYPE REF TO zcl_im_z_badi_inbox_search,
C_ITEM_1O                TYPE CRMT_AUI_MAP_ITEM_TYPE VALUE 'ONEORDER',
   l_param1o_tab   TYPE crmt_name_value_pair_tab,
   is_name         type standard table of CRMT_NAME_VALUE_PAIR,
   wa_name         like line of is_name,
      l_sort_1o_tab   TYPE crmtt_aui_sorting,
       lv_result_1o TYPE REF TO cl_crm_bol_entity_col.
data QUERY_1O type ref to CL_CRM_BOL_QUERY_SERVICE.
CONSTANTS:
abap_true      TYPE abap_bool VALUE 'X',
abap_false     TYPE abap_bool VALUE ' '.
data: c_BTQueryAUI          TYPE crmt_ext_obj_name
                                    VALUE 'BTQueryAUI',
       c_query1o              TYPE crmt_ext_obj_name VALUE 'BTQueryAUI',
      ob_query                    TYPE REF TO
                                    cl_crm_bol_query_service,
ob_result                   TYPE REF TO if_bol_bo_col,
ob_core                     TYPE REF TO cl_crm_bol_core,
         lr_aui_dq        TYPE REF TO cl_crm_aui_advquery_service,
         lr_aui           type ref to cl_crm_aui_query_service.
wa_name-name = 'ASSIGNEDTYPE'.
wa_name-value = '0000'.
append wa_name to is_name.
wa_name-name = 'DATETYPE'.
wa_name-value = '0001'.
append wa_name to is_name.
wa_name-name = 'MAINCATEGORY'.
wa_name-value = 'ZBGW'.
append wa_name to is_name.
wa_name-name = 'SORTEDBY'.
wa_name-value = '0000'.
append wa_name to is_name.
wa_name-name = 'SORTEDBY2'.
wa_name-value = '0000'.
append wa_name to is_name.
wa_name-name = 'TIMEPERIOD'.
wa_name-value = '0000'.
append wa_name to is_name.
wa_name-name = 'ZZFLD000006'.
wa_name-value = '0000012345'.
append wa_name to is_name.
wa_name-name = 'DESCRIPTON'.
wa_name-value = '*test*'.
append wa_name to is_name.
l_param1o_tab = IS_NAME.
ob_core = cl_crm_bol_core=>get_instance( ).
        ob_core->start_up( 'ALL' ).
TRY.
      query_1o = cl_crm_bol_query_service=>get_instance( c_query1o ).
    CATCH: cx_crm_unsupported_object.
ENDTRY.
query_1o->set_query_parameters( EXPORTING it_parameters = l_param1o_tab
                                              iv_convert    = abap_false ).
lv_result_1o ?= query_1o->get_query_result( ).
        ob_query = cl_crm_bol_query_service=>get_instance( c_BTQueryAUI ).
ob_query->set_query_parameters( EXPORTING it_parameters = l_param1o_tab
                                              iv_convert    = abap_false ).
lv_result_1o ?= ob_query->get_query_result( ).

Tried obtaining the output using SQL and the result is as follows:
SQL> WITH T AS
2 (
3 SELECT 1 COL1 FROM DUAL
4 UNION
5 SELECT 2 COL1 FROM DUAL
6 UNION
7 SELECT 3 COL1 FROM DUAL
8 UNION
9 SELECT 4 COL1 FROM DUAL
10 UNION
11 SELECT 5 COL1 FROM DUAL
12 UNION
13 SELECT 8 COL1 FROM DUAL
14 UNION
15 SELECT 9 COL1 FROM DUAL
16 UNION
17 SELECT 10 COL1 FROM DUAL
18 UNION
19 SELECT 13 COL1 FROM DUAL
20 UNION
21 SELECT 14 COL1 FROM DUAL
22 UNION
23 SELECT 15 COL1 FROM DUAL
24 UNION
25 SELECT 16 COL1 FROM DUAL
26 UNION
27 SELECT 23 COL1 FROM DUAL
28 UNION
29 SELECT 24 COL1 FROM DUAL
30 )
31 SELECT OUTPUT FROM
32 (
33 SELECT DECODE(COL3,NULL,COL1, COL2) || '-' || LEAD(DECODE(COL3,NULL,COL3, COL1)) OVER (ORDER BY DECODE(COL3,NULL,COL1, COL2)) OUTPUT FROM
34 (
35 SELECT COL1, LEAD(COL1) OVER (ORDER BY COL1) COL2, LAG(COL1) OVER (ORDER BY COL1) COL3 FROM T
36 )
37 WHERE
38 (COL2 - COL1 > 1 OR COL2 IS NULL OR COL3 IS NULL)
39 )
40 WHERE OUTPUT != '-';
OUTPUT
1-5
8-10
13-16
23-24

How to Upload a file in a Batch Mode ?

Hi, I want to upload a Comma separated value File via RFC to a BW system.
The scenario is the following: From a Portal server i call the BAPI using JC0/JCA.
The problem is that GUI_UPLOAD does not support a BATCH job. At least i get a error when calling the BAPI: Exception condition "NO_BATCH" raised.
How do i upload a file in a Batch Mode ?
Thanks,
Kai

Hi Kai,
Sorry for the delay. The delay was in trying to get to talk to the Basis team.
Here is how we have it.
On the message server of every instance, there will be a SAP admin id that is '<SID>ADM' or 'SAPSERVER<SID>' where SID is the system ID. We use the '<SID>ADM' user id.
On the external NT fileserver, there has to be a user id created on the NT box with the same SAP admin id and this id on the NT box should have access rights do Read/Write.
All of these have to be in the same domain (or different domains that have trust access to each other).
So, there is basis,network and security groups involved.
Once these are in place, we can have file access to the external fileserver box.
We use logical filenames at our place (Transaction FILE).
This makes all the file transfer locations well organized and manageable.
Hope that answers your question regarding this.
Regards,
-Ramesh

Getting a COM error when calling MenuItemExecute in batch mode

I support an internal document management system for our corporate contracts. Among other applications, I have one that runs nightly in batch mode to store new invoices and connect them via bookmarks to their corresponding “parent” contract files. The original program was created in 2005 with Acrobat 7 (later updated to Acrobat 8) and it worked well for several years. However, a few months ago I upgraded the system to Acrobat 9 and since then the program has not run consistently.
The “program” actually consists of a VB application and two plug-ins. The VB application does as much work as it can with IAC and the JSO bridge, but because the files are (owner) password protected one plug-in automatically applies the necessary password using AVDocDidOpen when the VB application opens the AVDoc. The VB application then also calls the other plug-in using MenuItemExecute. The second plug-in is used to create the bookmarks between the two files by grabbing info off bookmark strings and creating the necessary actions. It also applies the password to the files.
Here is brief outline form is how this is all structured:
pdDocParent.Open
         pdDocInvoice.Open
                 avDocParent.Open (This triggers the first plug-in to apply the password)
                         Create bookmark strings in both files using JSO bridge
                                MenuItemExecute (To create the bookmark action in the parent)
                                pdDocParent.Save
                        avDocParent.Close
                        avDocInvoice.Open (This triggers the first plug-in to apply the password)
                                MenuItemExecute (To create the bookmark action in the invoice)
                                pdDocInvoice.Save
                        avDocInvoice.Close
                pdDocInvoice.Close
        pdDocParent.Close
Since the upgrade, I’m getting a COM error [The server threw an exception. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))] on a non-consistent basis when the application tries to call MenuItemExecute. When I say “non-consistent” I mean that some days the program will process several hundred files just fine. Other days it won’t process any. Then some days it will not process the first, oh, four files but will process the next 300. Usually it runs fine when started interactively, but even then the error sometimes occurs.
I recompiled both plug-ins and the VB app using the Acrobat 9 SDK (headers for the plug-in and the Acrobat type library for the VB app) but that didn’t make any difference. I added code to check if the MenuItem is available and it is in all cases.
After reviewing this more, I got to thinking that perhaps a race condition was the culprit—that a string hadn’t been completely written before the second plug-in tried to create an action for it. So I added some half-second pauses along the way, but that doesn’t seem to have helped, either.
At this point the only thing I can think of is to rewrite the application as a pure plug-in. But it’s a long and involved application and if I can get the current app to work I’d prefer to do that. I tested it with Acrobat 10.1 and encountered similar problems.
As I said, it’s been working fine up until Acrobat 9. Does anyone know of anything that might have changed with Acrobat 9 that I haven’t considered? Is there anything else I might check? Thanks.

Leonard,
I'd be interested in hearing why you think that because others at Adobe have told me it's OK. Acrobat is only being called by one user at a time and we've paid for a full license.
Thanks,
Dick

Photoshop CS3 Actions Batch mode bug?

I posted this in the Mac forum but received no responses after a couple of days, so I am trying it here.
Photoshop CS3 Actions seem to have a bug such that when used in Automate > Batch mode it will use the name of the first file opened in the batch session for every file processed in that session. Since that name is used in Save step, this means having to deal with the "File Already Exist" dialog for every file in the batch because it is attempting to save at the designated location with the same file name. If the continue option is chosen each time, the final result is one file with the first opened file name, but with the contents of the last processed file.
To confirm that this is a problem particular to the opening step, I have disabled all processing steps as well as the saving step by toggling them in the Actions panel. I then ran the action in batch mode on a folder containing 4 files. This resulted in 4 opened files all with the same name but different image content.
This was with the "Override 'Open' Action Commands" checked/not checked, and the "Suppress File Open Options Dialogs" checked/not checked. The problem described also occurs when using a Droplet.
By comparison, Photoshop CS exhibits the expected behavior: when an action is used in batch mode to process an entire folder of files, the name of each file is retained after opening and used after processing in the save or export step.
The above described behavior of CS3 is a change acquired along the way to the CS3 version (I do not have the CS2 version to test). But more importantly, can someone please report if the CS4 version behaves as I described for CS3, or if it has been returned to the CS behavior?
OS X 10.4.11
G4 800 MHz 2 MB L3/processor 1.25 GB SDRAM
Is this a known bug?
Al

Hello Miguel,
I was going to come back to post some of my findings, one of which relates to your staement:
"- The open command created by Photoshop 6 doesn't keep the file's name, it is a much simple open command, and so it opens the file with the own file's name."
In my case I found that my CS version of the "same" action worked, while the CS3 version failed, precisely because the earlier one records less detail for the open step.
My need is to convert dozens of Quark pdf files to GIF and JPEG files for the web. What I found after several days of testing is that it is best to record the opening step in CS3 NOT using a pdf file, so that the "Open As Generic Pdf with 'Name____' " would not be coded into the opening step. Instead I recorded the whole action using a PSD file. Then I can proceed to run it in Batch mode choosing a folder of Quark pdf files as the source location with "Override 'Open' Action Commands" checked, and the "Suppress File Open Options Dialogs" checked, and it opens all the pdf files just fine in some background process, not getting stuck in the details of the file name, and proceeds to cary out the flattening, saving, and closing steps to my chosen target location and uses the finder file name of each pdf files in the source folder to save a filename.ext in the Target folder.
Contrary to what I stated in my original post, "Override 'Open' Action Commands" checked/not checked does indeed make a difference. If it is not checked, the files do open in batch mode, but the other steps are not performed. There is much more about this that I would like to know, and this may not be a general solution for all types of files that a user may wish to process in batch mode, but it works for my case. The main trick is to use as simple an opening step as possible when recording the action, and then letting Photoshop use whatever background process it requires to open a particular file type. I tested this by manually saving a pdf file to each of the twenty some odd formats available in the save as dialog to a Source folder, and then proceeded to batch process that folder with the action described above, and it worked for all except one.
So while there may not be a bug involved in this problem, there certainly is a lack of documentation about how the "improvements" in the opening step in newer versions of Photoshop affect using Actions in Batch mode.
Please comment if you can further explain any of the reported results. In particular, what is the situation in CS4?
Thanks,
Al

RE: Reporting after many forte tasks run in batch mode?

Actually, if you're looking for MAKEAPPDISTRIB (I assume that's how you
create distributable) you can see if the command was succesfull or not.
<<deployrep.js>> This Jscript will look for this string and it will
generate a report based on the next line in the log file.
The script assumes you have an environment variable (DESCARTES_ROOT) that
points to a folder (let's say "D:\TEST"). Under that folder you have a log
folder ("d:\test\log") which holds the deploy.log log file. You can easily
change the script to reflect your systems settings.
The generated report looks like that : <<deployrep.txt>>
Norocel Popa
Forte SysEng
(519)746-8110 x 2292
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, March 16, 1999 11:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in batch mode ?
Hi,
I would like to know if overnight builds went okay, and therefore need to
parse the log(s).
The issue is that I don't have a proper string to look for (i.e. for
grep).
If I consider 'ERROR", then the following message won't be understandable.
There might a way to cheat with the indentation (i.e. the lines with only
two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an existing
partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1,
taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in application
"fscript", pid 22713 on node rambo in environment SuperEnv.

Hi,
To trap error message from Forte log, I usually do this
egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
This takes a regular expression to 'egrep' all occurrences of "exception" or
"error" not matter they are in upper case or lower case.
Hope this help.
Regards,
Peter Sham.
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, March 17, 1999 12:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in
batch mode ?
Hi,
I would like to know if overnight builds went okay, and
therefore need to parse the log(s).
The issue is that I don't have a proper string to look for
(i.e. for grep).
If I consider 'ERROR", then the following message won't be
understandable.
There might a way to cheat with the indentation (i.e. the
lines with only two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object
MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an
existing partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition
"Fscript_cl9_Client",
(partitionId =
B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
application
"fscript", pid 22713 on node rambo in environment
SuperEnv.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

How to run a 10g report in quiet\batch mode

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
Thank you,
Dmitri

So the server (we will call it server1) you have "Redwood Cronacle 6.0.2" installed on has a C: drive and a D: drive. On the D: drive is installed Developer 6i (D:\ORADEV6I). You can install Developer Suite 10g also on the D: drive (D:\ORADEV10G for example). After that, setup Oracle iAS on server2. The good news is you have to change very little code. You can:
Not use the iAS server at all and use the following command (similar to how you are doing it now) in Redwood:
return 'D:\ORADEV10G\BIN\RWRUN.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' batch=yes paramform=no destype=file'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE';If you want to use the iAS server, you have to consider where the report will physicall exist. You can have it exist on the reports server or you can have it brought back to the client. If you bring it back to the client you will lose the ability to run this asynchronously (or in batch mode). You will have to play with some of these parameters to get it to work perfectly, but this should be a good start. These are examples of have the report results saved locally on server1...not server2:
1. Use rwclient to submit a report request
return 'D:\ORADEV10G\BIN\RWCLIENT.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=localfile'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';2. Use rwservlet to submit a report request
return 'D:\ORADEV10G\BIN\RWSERVLET.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=localfile'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';I would think that Cronacle 6.0.2 can submit a url as a job and wait for the results to be streamed back, so you could look into doing that also, in which case the url you would submit for the job would be something like:
return 'http://server2:7777/reports/rwservlet?'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=cache'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';

How to run a 10g report in batch mode.

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
Thank you,
Dmitri

For those of you interested in following this refer to the same thread in the Reports Forum:
How to run a 10g report in quiet\batch mode

Defining a batch specification in batch mode

Similar Messages

Maybe you are looking for