Defining a diferent local IP to entablish connection with ttatsc

With the command rdesktop you can use the -n option to define the hostname or the IP address if you have more than one IPs on your machine, and you need to use one of these in particular.
Can I do the same with the ttatsc command?? Do I need to modify some *.exp flie???
Thanks in advance

Thanks for your help Paolo,
This is so logical! I've think about this when i wrote this message...
I'm back on tuesday.
I'll try with one side fxo and fxs to the other!
thanks a lot

Similar Messages

ANN: Video tutorial for defining a PHP local testing server on Windows

I have created a video tutorial to show how to define a PHP
local
testing server on Windows. It's just under 8 and a half
minutes, and can
be found here:
http://experts.na3.acrobat.com/phplocalsitewin/
I made it for Windows only to avoid confusing viewers with
too many
bewildering choices. I'll try to make a Mac version in the
not too
distant future, but don't yet have video capture software for
a Mac.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

"David Powers" <[email protected]> wrote in message
news:gfc9vd$2qt$[email protected]..
>I have created a video tutorial to show how to define a
PHP local testing
>server on Windows. It's just under 8 and a half minutes,
and can be found
>here:
>
>
http://experts.na3.acrobat.com/phplocalsitewin/
>
> I made it for Windows only to avoid confusing viewers
with too many
> bewildering choices. I'll try to make a Mac version in
the not too distant
> future, but don't yet have video capture software for a
Mac.
Great tutorial David, thanks for sharing
Thierry
http://www.TJKDesign.com/go/?0
| Articles and Tutorials
http://divahtml.com/products/scripts_dreamweaver_extensions.php
| Extensions
that keep your markup clean
http://www.fourlevel.com/ |
CSS Menus, Gallery, Tab Panels, etc

Odbc.ini entry on local unix server to connect to a T10 on remote server

I am trying to setup an entry in the ODBC.INI file on local unix server that has T10 client installed. I want to connect to a T10 datastore on a different server using this ODBC entry (client/server connection for a Informatica tool)
Could some one tell me how this ODBC.INI entry should look like on my local server.

Say your remote dsn is called 'mydsn' and your remote server called 'TTserver' then the entry on the client machine would be:
[mydsn_cs]
TTC_SERVER_DSN=mydsn
TTC_SERVER=myserver
You would then also need an entry in the sys.ttconnect.ini file as follows:
[myserver]
Network_Address=TTserver
TCP_PORT=<port of server daemon on server>
The port of the server daemon is typicaly 2 more than the port of the main daemon - you can check this by typing 'ttStatus' and looking for the line starting with 'TimesTen server pid'.
Then test your connection with 'ttIsqlCS mydsn_cs'.
*Note: the dsn entry for 'mydsn' on the server needs to be in the sys.odbc.ini file. It can not be in a private .odbc.ini file.

Configure Jabber for Mac with local CUCM and WebEx Connect

Hi, I was wondering if anyone has been able to configure the Jabber for Mac 8.6.2 client to use the WebEx Connect presence server with a local CUCM and Unity Connection servers. The preferences accounts tab does not show or allow the addition of the voice services. I have added from a working local CUCM preferences plist file what I believe are the correct entries however I still cannot see the accounts on the preferences tab. We currently do not have a local cisco presence server hence the requirement to trial the WebEx Connect server as I can't get past the first configuration step without it.
regards
paul

Hi - I have done this via the admin portal but still cannot get the Jabber client for Mac to register for voice. The Windows version works fine for the same user and CUCM device. Are there any other settings that need to be enabled specific to the Mac client?
Thanks.

Cannot connect to local network while connected with EasyVPN

Hi All,
I'm looking on many forums for an answer, but I cannot get it working.
I have configured EasyVPN with CCP and also with CLI. I had it both working perfect, except the most important thing.
I can connect with the Cisco VPN client to the router, but i'm not able to connect or even ping a system inside the remote network. My laptop gets an IP address from the address pool of the router.
I really hope someone can help me before my manager is losing his patience :-)
Here is my config. (before someone is mentioning it, i have to clean up my config a bit...I mean, look at the acl's )
Current configuration : 13939 bytes
! Last configuration change at 12:26:53 UTC Thu Jan 9 2014 by admin
version 15.2
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname Router
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 10240
logging console critical
enable secret 4 ********
aaa new-model
aaa authentication login local_authen local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization exec local_author local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa session-id common
no process cpu extended history
crypto pki trustpoint TP-self-signed-********
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-********
revocation-check none
rsakeypair TP-self-signed-********
crypto pki certificate chain TP-self-signed-********
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33303239 34303934 3438301E 170D3133 30343032 30353436
31345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 30323934
30393434 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B9C3 F8E6BD43 3351D861 68398114 D31AACC1 CE16CDDA 7F0876BC 6E55EA3C
5F258D90 20FC882D 42C90257 92DB9113 B461DD81 4080153F 6AE041AD E5BDDF7E
7C21BD1B 35F05CCB F6D34A4D 6B04C309 F39D8426 865E2BFE 9E8051F2 6F411A49
D71FBF0C 1AC85BEE 355563FB 2353D0C7 28D49071 840AF99B AF59D768 FCDCDF03
94FF0203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 145ACD47 89D51095 70BE5400 595E826A 6A9E5E95 71301D06
03551D0E 04160414 5ACD4789 D5109570 BE540059 5E826A6A 9E5E9571 300D0609
2A864886 F70D0101 05050003 8181003B 1988FFCD 93112A99 707B7AD8 B56A08C0
C274B974 B076AA19 BAFCC868 F118AE7D 4D8A55E2 42D8F9A9 9D617093 7EF6D459
6BC0A990 BF5AF3E8 8E7F2787 41F4BFE2 65A1A3B0 D726033A 47A24D29 159ABF92
16DBCF5C EC6602C2 E6137C0B C1FC7125 37E9CE49 82B45E18 FAB31A36 990BB3BC
30D9EE8E 8B0A9F7C DC0B6C2B FA2740
            quit
no ip source-route
ip cef
no ip bootp server
ip name-server ********
ip name-server ********
no ipv6 cef
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
server name scsc.msg.yahoo.com
server name scsd.msg.yahoo.com
server name cs16.msg.dcn.yahoo.com
server name cs19.msg.dcn.yahoo.com
server name cs42.msg.dcn.yahoo.com
server name cs53.msg.dcn.yahoo.com
server name cs54.msg.dcn.yahoo.com
server name ads1.vip.scd.yahoo.com
server name radio1.launch.vip.dal.yahoo.com
server name in1.msg.vip.re2.yahoo.com
server name data1.my.vip.sc5.yahoo.com
server name address1.pim.vip.mud.yahoo.com
server name edit.messenger.yahoo.com
server name messenger.yahoo.com
server name http.pager.yahoo.com
server name privacy.yahoo.com
server name csa.yahoo.com
server name csb.yahoo.com
server name csc.yahoo.com
parameter-map type protocol-info msn-servers
server name messenger.hotmail.com
server name gateway.messenger.hotmail.com
server name webmessenger.msn.com
parameter-map type protocol-info aol-servers
server name login.oscar.aol.com
server name toc.oscar.aol.com
server name oam-d09a.blue.aol.com
multilink bundle-name authenticated
license udi pid C3900-SPE100/K9 sn ********
username admin privilege 15 secret 4 ********
username guido privilege 15 secret 4 ********
redundancy
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
class-map type inspect imap match-any ccp-app-imap
match invalid-command
class-map type inspect match-any ccp-cls-protocol-p2p
match protocol edonkey signature
match protocol gnutella signature
match protocol kazaa2 signature
match protocol fasttrack signature
match protocol bittorrent signature
class-map type inspect match-all sdm-nat-http-1
match access-group 101
match protocol http
class-map type inspect match-all sdm-nat-user-protocol--1-2
match access-group 102
class-map type inspect match-all sdm-nat-user-protocol--1-1
match access-group 101
class-map type inspect smtp match-any ccp-app-smtp
match data-length gt 5000000
class-map type inspect match-any ccp-skinny-inspect
match protocol skinny
class-map type inspect match-any ccp-h323nxg-inspect
match protocol h323-nxg
class-map type inspect match-any ccp-cls-icmp-access
match protocol icmp
match protocol tcp
match protocol udp
class-map type inspect match-any ccp-cls-protocol-im
match protocol ymsgr yahoo-servers
match protocol msnmsgr msn-servers
match protocol aol aol-servers
class-map type inspect match-all ccp-protocol-pop3
match protocol pop3
class-map type inspect match-any ccp-h225ras-inspect
match protocol h225ras
class-map type inspect match-any ccp-h323annexe-inspect
match protocol h323-annexe
class-map type inspect match-any ccp-cls-insp-traffic
match protocol pptp
match protocol dns
match protocol https
match protocol icmp
match protocol imap
match protocol pop3
match protocol tcp
match protocol udp
class-map type inspect pop3 match-any ccp-app-pop3
match invalid-command
class-map type inspect match-all SDM_GRE
match access-group name SDM_GRE
class-map type inspect match-any ccp-h323-inspect
match protocol h323
class-map type inspect match-all ccp-invalid-src
match access-group 100
class-map type inspect match-any ccp-sip-inspect
match protocol sip
class-map type inspect match-all ccp-protocol-imap
match protocol imap
class-map type inspect match-all sdm-nat-https-1
match access-group 101
match protocol https
class-map type inspect match-all ccp-protocol-smtp
match protocol smtp
class-map type inspect match-all ccp-protocol-http
match protocol http
class-map type inspect match-any CCP_PPTP
match class-map SDM_GRE
class-map type inspect match-all ccp-insp-traffic
match class-map ccp-cls-insp-traffic
class-map type inspect match-all ccp-protocol-p2p
match class-map ccp-cls-protocol-p2p
class-map type inspect match-all ccp-protocol-im
match class-map ccp-cls-protocol-im
class-map type inspect match-all ccp-icmp-access
match class-map ccp-cls-icmp-access
policy-map type inspect pop3 ccp-action-pop3
class type inspect pop3 ccp-app-pop3
log
reset
policy-map type inspect smtp ccp-action-smtp
class type inspect smtp ccp-app-smtp
reset
policy-map type inspect ccp-pol-outToIn
class type inspect ccp-protocol-http
inspect
class type inspect CCP_PPTP
pass
class type inspect sdm-nat-http-1
inspect
class type inspect sdm-nat-https-1
inspect
class type inspect sdm-nat-user-protocol--1-1
inspect
class type inspect sdm-nat-user-protocol--1-2
inspect
class class-default
drop log
policy-map type inspect imap ccp-action-imap
class type inspect imap ccp-app-imap
log
reset
policy-map type inspect ccp-inspect
class type inspect ccp-invalid-src
drop log
class type inspect ccp-protocol-http
inspect
class type inspect ccp-protocol-smtp
inspect
service-policy smtp ccp-action-smtp
class type inspect ccp-protocol-imap
inspect
service-policy imap ccp-action-imap
class type inspect ccp-protocol-pop3
inspect
service-policy pop3 ccp-action-pop3
class type inspect ccp-protocol-p2p
drop log
class type inspect ccp-protocol-im
drop log
class type inspect ccp-insp-traffic
inspect
class type inspect ccp-sip-inspect
inspect
class type inspect ccp-h323-inspect
inspect
class type inspect ccp-h323annexe-inspect
inspect
class type inspect ccp-h225ras-inspect
inspect
class type inspect ccp-h323nxg-inspect
inspect
class type inspect ccp-skinny-inspect
inspect
class class-default
drop
policy-map type inspect ccp-permit
class class-default
pass
policy-map type inspect ccp-permit-icmpreply
class type inspect ccp-icmp-access
inspect
class class-default
pass
zone security in-zone
zone security out-zone
zone-pair security ccp-zp-self-out source self destination out-zone
service-policy type inspect ccp-permit-icmpreply
zone-pair security ccp-zp-in-out source in-zone destination out-zone
service-policy type inspect ccp-inspect
zone-pair security ccp-zp-out-self source out-zone destination self
service-policy type inspect ccp-permit
zone-pair security ccp-zp-out-zone-To-in-zone source out-zone destination in-zone
service-policy type inspect ccp-pol-outToIn
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group jmgvpn
key ****
pool SDM_POOL_1
include-local-lan
max-users 10
netmask 255.255.255.0
crypto isakmp profile ciscocp-ike-profile-1
   match identity group jmgvpn
   client authentication list ciscocp_vpn_xauth_ml_1
   isakmp authorization list ciscocp_vpn_group_ml_1
   client configuration address respond
   virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
mode tunnel
crypto ipsec profile CiscoCP_Profile1
set transform-set ESP-3DES-SHA
set isakmp-profile ciscocp-ike-profile-1
interface Null0
no ip unreachables
interface Embedded-Service-Engine0/0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
shutdown
interface GigabitEthernet0/0
description JMG$FW_INSIDE$
ip address 10.0.14.*** 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
zone-member security in-zone
glbp 10 ip 10.0.14.***
glbp 10 authentication text JMG
glbp 10 forwarder preempt delay minimum 100
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/1
description Cloud$ETH-LAN$$FW_INSIDE$
ip address 10.3.15.*** 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
zone-member security in-zone
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/2
description Internet (Only in use on R01)$FW_OUTSIDE$$ETH-WAN$
ip address 46.144.***.*** 255.255.255.240
no ip redirects
no ip proxy-arp
ip verify unicast reverse-path
ip flow ingress
ip flow egress
ip nat outside
ip virtual-reassembly in
zone-member security out-zone
duplex auto
speed auto
media-type rj45
no mop enabled
interface Virtual-Template1 type tunnel
ip unnumbered GigabitEthernet0/0
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
ip local pool SDM_POOL_1 192.168.1.1 192.168.1.10
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 10 interface GigabitEthernet0/2 overload
ip nat inside source list 11 interface GigabitEthernet0/2 overload
ip nat inside source static tcp 10.0.14.*** 443 interface GigabitEthernet0/2 443
ip nat inside source static tcp 10.0.14.*** 80 interface GigabitEthernet0/2 80
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/2 permanent
ip route 10.0.0.0 255.0.0.0 GigabitEthernet0/1 permanent
ip route 10.1.14.*** 255.255.255.0 10.0.14.*** permanent
ip access-list extended SDM_GRE
remark CCP_ACL Category=1
permit gre any any
logging trap debugging
access-list 1 remark HTTP Access-class list
access-list 1 remark CCP_ACL Category=1
access-list 1 permit 10.3.15.24 0.0.0.3
access-list 1 permit 10.0.14.0 0.0.0.255
access-list 1 deny   any
access-list 3 remark CCP_ACL Category=2
access-list 3 permit 10.5.14.0 0.0.0.255
access-list 3 permit 10.0.14.0 0.0.0.255
access-list 5 remark CCP_ACL Category=2
access-list 5 permit 10.0.14.0 0.0.0.255
access-list 6 remark CCP_ACL Category=2
access-list 6 permit 10.0.14.0 0.0.0.255
access-list 7 remark CCP_ACL Category=2
access-list 7 permit 10.0.14.0 0.0.0.255
access-list 8 remark CCP_ACL Category=2
access-list 8 permit 10.0.14.0 0.0.0.255
access-list 9 remark CCP_ACL Category=2
access-list 9 permit 10.0.14.0 0.0.0.255
access-list 10 remark CCP_ACL Category=2
access-list 10 permit 10.0.14.0 0.0.0.255
access-list 11 remark CCP_ACL Category=2
access-list 11 permit 10.0.14.0 0.0.0.255
access-list 100 remark CCP_ACL Category=128
access-list 100 permit ip host 255.255.255.255 any
access-list 100 permit ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip 192.168.253.0 0.0.0.255 any
access-list 101 remark CCP_ACL Category=0
access-list 101 permit ip any host 10.0.14.153
access-list 102 remark CCP_ACL Category=0
access-list 102 permit ip any host 10.0.14.173
no cdp run
control-plane
banner login ^CCCPlease login. Or leave if you have no right to be here.^C
line con 0
login authentication local_authen
transport output telnet
line aux 0
login authentication local_authen
transport output telnet
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
access-class 23 in
authorization exec local_author
login authentication local_authen
transport input telnet ssh
line vty 5 15
access-class 23 in
authorization exec local_author
login authentication local_authen
transport input telnet ssh
scheduler allocate 20000 1000
scheduler interval 500
end

Remove the ip nat outside command for a moment during a permitted downtime.
I have a feeling you should do some NAT excemption for the VPN traffic (deny vpn traffic for nat policies).

Local Account can't connect to address server

Hi there, since a few days my addresses and calendar are not synced anymore. I found out, I can't connect with my local accounts to my local mac os x server mavericks on the same machine anymore. The same days I changed something on my security and firewall settings, maybe there is a problem. Anyone knows, what I have to do, please?
The following error messages are printed in console log:
04.08.14 05:09:22,738 com.apple.preferences.internetaccounts.remoteservice[27121]: [CardDAVPlugin-ERROR] Unable to find additional info dictionary for key: /principals/__uids__/E276D199-408C-44EA-AA27-9AA0142D3B47/
04.08.14 05:09:23,283 com.apple.preferences.internetaccounts.remoteservice[27121]: [CardDAVPlugin-ERROR] Unable to find additional info dictionary for key: /principals/__uids__/E276D199-408C-44EA-AA27-9AA0142D3B47/
04.08.14 05:09:23,284 com.apple.preferences.internetaccounts.remoteservice[27121]: [CardDAVPlugin-ERROR] No 'AddlInfoKey' present to save: {

Now I have the first Part of the solution. First I had to empty the Folder ~/Library/Caches/ . Than I deleted the File ~/Library/Preferences/com.apple.internetaccounts_old.plist . Not sure, the last one is necessary. And third step was, I recreated the accounts from inside iCal and the Address Book.
But now I still can't connect from my iPhone to the Server... Any suggestions?

Define R/3 system in EP: System Connection Test failes

Hi all
I want to configure a R/3 system (fixed application server) in SAP EP Netweaver 04. I am pretty sure that the connection details and the user mapping is ok. When I test the connection I get
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
I now used the tool described in OSS Note 785029:
- When I test connection for the JCO Client Service using the system alias the test is successful
- When I test connection for the Connector Gateway Service for the same system alias I get an exception:
com/sap/portal/connectivity/ConnectivityRuntimeException
Any idea? What can go wrong between the Connector Gateway Service and the JCO?
Bye
Michael

Hi Jan
Thanks for your help. I could only find trace files under
/usr/sap/<SID/><instance>/j2ee/cluster/server0. They seem to contain only the successful calls from testing the JCO Client Service.
I guess the UIDPW and JCO must be working because the JCO Client Service returns success. Only the Connector Gateway Service returns an exception.
I looked at various traces and log files, also used the RFC trace on the backend instance (SAP R/3 4.7). It looks like the Connector Gateway Service returns and exception before as actual call is done. Where would I find more information about the exception thrown in the Connector Gateway Service ?
Thanks
Michael

Access local mpls network surf internet with pda(gprs/edge/3g connection)

dear sir,
we have the hp pda 6365 and wish to use this pda connect with gprs/edge/3g and hopefully can access the local mpls network and surf internet. Any idea how to perform this? please share. thank you very much.
hereby is the link to the pda.
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp &lang=en&cc=us&contentType=SupportManual&docIndexId=179166&prodTypeId=215348&prodSeriesId=430120&lang=en&cc=us

Hi,
For this kind of case, normally, I anticipate the connection comes from internet cloud which refers to remote access.
Since we have managed firewall services that associated with customer VRF, on windows based client, just configure/enable PPTP/IPSec on client - like most laptop or maybe perhaps pda...
cheers..
maher

I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define

I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
Thanks,
Eyal

I tried this! Somebody suggested it in another thread. It did not work, sadly.

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

Where is sign when you call international number, but first you call local number and after connect open keyboard and see that sign doesn't exist only 0

Where is sign when you call international number, but first you call local number and after connect open keyboard and see that sign doesn't exist only 0

No that is not work. Try to call some number and when is connect click on keyboard and you can see that sign "+" doesn't exist.
So I use local number, when I'm connect I have option to call international number but like "+3193675xxxx" how I can put?
Before on iOS 6 I do it.

Can I set up a local network without being connected to internet?

Can I set up a local network with Airport without being connected to internet?

Yes. Your AirPort Express router, by default, will create an unsecured wireless network and does not need to be connected to the Internet to do so. Local clients can then connect to this wireless network and be able to "see" each other.

I formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated why and how can i fix this i bought it for my daughter for x m

i formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated why and how can i fix this i bought it for my daughter for x mas and that is tomorrow

AdaS_VZW,
I'm not sure if the area has been surveyed; it's a large group of apartment buildings about a within a couple miles of Dulles International Airport in Northern Virginia, so I would imagine that it probably has, but I'm not sure. How would I find out?
I understand that the Network Extender does not support LTE connections (I know there are two models, the 1x-only and 3g, both made by Samsung - I have the 3g model, SCS-2U01). I know that it can support a 3G data connection, but that should be irrelevant - I'm always connected to my wifi network in my apartment.
What's particularly vexing, however, is that both a Galaxy S4 and Galaxy Nexus in my apartment (the other lines on my account) do not seem to have this issue. While I haven't done so with the S4, the Nexus exhibits this problem when my SIM is in it - and again, this is a fresh SIM from just a few weeks ago.
I'm currently trying to disable Mobile Data when in the apartment to see if that will make it more stable. I'll post in a day or two with results from that.
Shawn

Failed to Establish Connection with SQL Database Server (EAS)

Hi,
We have recently installed version 11.1.2.1 of essbase. Everything is working just peachy. One of my users tried to build a load rule using an Oracle ODBC data connection and gets the error:
Failed to Establish Connection with SQL Database Server. See log for more information.
When I look in the log I see this:
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1013091)
Received Command [SQLListDsn] from user [mressler@EnCanaAD]
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1013091)
Received Command [SQLRetrieve] from user [mressler@EnCanaAD]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021004)
Connection String is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021041)
Connection String is [DSN=Test;UID=...;PWD=...;]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021006)
SELECT Statement [SELECT '1' from dual] is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Warning(1080014)
Transaction [ 0x140002( 0x4f4cfd87.0x7b890 ) ] aborted due to status [1021001].
I have tested that the ODBC connection can connect to the database. The sql query has been dumbed down to select '1' from dual. I have not included the word "select" in the query.
Anyone seen this before? We are in the process of uninstalling the Oracle client completely and re-installing it to see if this solves the issue. We only installed the 64 bit version of the Oracle client. I am running on Windows Enterprise 2008 R2 - 64 bit. EAS, Essbase, EIS are all 64 bit installs. I believe Studio is the only one that is 32bit. However we are not currently using this product.
Thanks,
Mike

Hi Mike,
With Oracle Support's help, we got 3 of the 5 servers working now. We were using the Datadirect drivers but were configuring them wrong! You have to use the Standard Connection portion in the setup, specifying the Host, Port Number (1521) and the SID. We were using the TNSNames Connection which worked in the past, but apparently does not now.
So I am down to 2 servers not working. They are both Windows 2008 R2 Enterprise 64 bit, running Oracle EPM Essbase 11.1.2.1. When I Open SQL in EAS it prompts for database (Essbase Server, App, DB) and when I hit ok it pops up with "Network error: Cannot Locate Connect Information For []". We did not do any of the suggestions in the document you linked to get the other 3 servers working. When you hit ok on that error, you then get another error stating, "There are no Data Sources defined. 'SQL data sources' option will be disabled". We do have datasources defined on the server.
Any ideas?
Thanks,
Mike
Edited by: Mike on Mar 1, 2012 8:38 AM

Connection with a server or service is lost

I have small network setup with Mac OS X as the server and around 6 clients (mix of PC's and Mac's) authenticating from OD on the server. Since last week I am getting this strange error from server admin "Connection with the server or service is lost. Contact the n/w administrator or try log on again.". I get this error message every morning and none of the server features can be accessed including the log in to the network which fails on all the machines. Everything will work fine when I reboot the server.
So, I wanted to know what is causing this problem & how to go abt fixing it?

I can confidently rule out the possibility of an intruder interfering with the network.
Who said "intruder"?
So there is no malware on the local client and server boxes, nor on any printers, nor on any WiFi widgets or managed switches or other network infrastructure, and there are no unauthorized wired or wireless connections? That's a very rare achievement. Congrats; most excellent work! (It's probably not malware, though; it's more likely some authorized activity or authorized person and not malware. Though yes, it could be malware.
As for the disconnection here...
This could be building cleaning crew borrowing an electric outlet for some of their cleaning equipment. Unplug router, plug in the cleaning equipment, clean, plug router back in, leave. Or some helpful security guards shutting off a power switch or a breaker as part of the nightly rounds, or any number of other variations, too. A vacuum cleaner running across a damaged network cable, or a glitch or sag or transient caused by a high-demand electric device changing its power state.
Find out which widget (router, switch, firewall, whatever) is involved and work from there.
Also look for traffic spikes and other such; for odd network traffic patterns.
Scheduled reboots of network devices or such?
Hardware problems?
Also look for time-out programs and idle activity monitors and related; these are rare on Mac boxes, but have been seen in other environments, and have been seen on various network servers.

Defining a diferent local IP to entablish connection with ttatsc

Similar Messages

Maybe you are looking for