Defining an SLD Strategy for XI Migration using CMS

Can the following scenario occur? Please explain if any of my assumption are incorrect.
-> An XI DEV, QA, and PRD environments each with a separate "slave" SLD.
-> A separate "master" SLD that contains all XI dimensions (i.e. transport, solution, and technical).
-> This "master" SLD will deploy all relevant SLD components (Products (versions), SC (versions), Technical Systems, and Business Systems) to the specified SLD "slave" environment. For instance, the master SLD will provide only DEV SLD components to the DEV "slave" SLD specific instance. No QA or PRD SLD relevant components will be stored on the DEV "slave" SLD.
-> All Integration Repository (IR) and Integration Directory (ID) objects will be exported from DEV "slave" SLD and imported into the "master" SLD.
-> All ID components will have transport targets defined in the master SLD for DEV to QA and QA to PRD, respectively.
-> CMS will perform all transports from DEV to QA and from QA to PRD for both IR and ID components by defining "tracks" for specific SC and development configurations for each of the development states of an SC.

The following scenario can occur. That's what we're doing at our customer site.
-The only thing is that you can import QA and PRD relevant components to DEV. If you want to define the transport targets between the systems, then this information will need to be the individual SLDs (slave SLDs).
I hope this helps.
Regards,
Jay Malla
SAP XI Consultant
Licensed To Code

Similar Messages

What is the best SLD strategy for CE?

We have some options like a single centralized SLD or a local SLD or something between them, e.g. an SLD for dev systems, etc.
Could you share your opinion -- what is a good SLD strategy for CE? Thanks!

Hi,
It wud depend on the landscape u have and requirement stategy.............
If you have a productive version...............obviously centralised SLD wud be preferred.....
Either case......juz to touch-base features of CE 7.1 i.e for exploration and R&D purpose..........lacal SLD and developer edition wud do.......

Release strategy for Release POs

Hi Every one,
We have a requirement.
A contract is created and approved as per the regular strategy.
The releases (POs) are created against it and sent directly to the vendor.
As the Contract is already approved, standard SAP does not apply the release strategy for the POs created for the contract.
But the business wants the PO releases too to follow the release strategy.
Can you please look in to this and let me what changes we need to make this happen.
Regards
Pavan

As the Contract is already approved, standard SAP does not apply the release strategy for the POs created for the contract
This statement is not correct, it's upto you to use or Not to use Release Process for release Orders (PO) created w.r.to Contract.
As the table & fields are Common for both Contract & PO release ..you need to choose the PO relevant fields & values in the Release Strategy..
So that the Release Process is applicable to PO's created w.r.to Contract also..
For ex: if you use the field purchase Doc category as a Character in the Release , it differentiates whether it is PO or Contract..
So that you can define different Release Strategy for PO & Contract
Or if you maintain the Doc type of PO in the Contract Release Strategy in CL20N / CL24N trxn code..
then the release strategy applies to PO also..

Release strategy for PO and Contract

Hi,
I maintain characteritic for PO
Plant
Doc Type
Net Order Value
Purchasing Group
I maintain characteristic for contract
Company code
Target Value
Doc Type
Purchasing group
My class consist of
Plant
Doc Type
Net Order Value
Purchasing Group
Company code
Target value
Q1: Do i need to maintain ALL characteristic value when i define my release strategy for PO or Contract as some characteristic only apply to PO only or contract only?
Q2: What option do i have if i need to maintain all characteristic value ? leave it blank ? empty
Currently my PO release is working fine but when i try to maintain the contract release inside the class . my PO release is not triggering . I maintained diffrent release group for both PO and Contract .
Thank for your advice

First of all
For purchasing like PO,pr,contract you can able to get in ekko table.No need to maintain separate release unless if it your business requirement.Take Document type as one of the characteristics it will distinguish whether it is PO or contract.
You have to maintain all the characteristic value then only it will trigered release.
Check the release indicator as well.
Hope it will help.

The tax code entered is not defined in the country for this company code

HI ALL
when we relase billing document to finance i am getting this below error
Diagnosis
    The tax code entered is not defined in the country for this
    company code.
System Response
Procedure
    Check and, if necessary, correct the entry.
Procedure for System Administration
    If it is not an input error, check and possibly change the
    system settings.
    To do this, choose Maintain entries (F5).
    1. Check whether the required tax determination procedure
        is assigned to the relevant country. the Procedure
        field is in the detail screen.
    2. Create a new tax code if required.
Thanks & Regards
Aarman

You can define the tax code for your country using the following menupath in customizing:
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales and Purchases>Calculation-->Define tax codes ........... in the next screen enter your country and then the tax code you wish to create and press enter. You would be then directed to another screen, where you would maintain the description and whether it is a Input tax or Output tax and then maintain the appropriate tax percentage and save.
Your country should also be assigned to a calculation procedure. You check the same using the same menupath as mentioned above: .............Tax on Sales and purchases>Basic Settings>Assign country to calculation procedure........In the next screen, enter the appropriate tax procedure for your country. Eg: for country DE assign tax procedure as TAXD and save.
Hope this helps.
Regards
SATYA

Best strategy for migrating GL 6 DW CS4?

First I gotta say that -- as decade-long user of several Adobe products -- Adobe has really screwed over long-time users of Adobe Golive. After a week of messing around with something that should be a slam dunk (considering the substatial amount of $ I've paid to Adobe over the years for multiple copies of GoLive 5, 6 and CS2), I can tell you Adobe's GL > DW migration utility ONLY works for sites created FROM SCRATCH in GL CS2 (they must have the web-content, web-data folder structure). This means that Adobe's migration utility only works for maybe 10% - 15% of the GoLive sites out there, and about 10% - 15% of Adobe's loyal GoLive customers, and it particularly screws over Adobe's longtime GoLive customers. Sweet! ( (Just like Adobe screwed over users of PhotoStyler -- which was a better image editor than PhotoShop, BTW.) Obviously, I would walk away from Adobe and make sure I never ever paid them another cent, but the Republican-Democrat "free market economy" has made sure I don't have that option.
So I've gotta make Dreamweaver work, which means I've gotta migrate several large sites (the biggest has 5,000 static pages and is about 2 gigs in size) from GoLive 6 (or GoLive CS2 with the older folder structure) to Dreamweaver CS4.
Which brings me to my question -- what's the best strategy for doing ths? Adobe's migration utility is a bad joke, so here's the alternative, real world plan I've come up with. I'd apreciate any suggestions or comments...
1) create copies of all my GL components in the content folders for my GL site (not in the GoLIve components folder)
2) replace the content of all GoLive compnents (in the GoLive components folder) with unque character strings, so that instead of a header with images and text, my old header would look something like xxxyyyzzz9
3) create a new folder called astoni in the root of my hard drive. Copy all my GoLIve web site content (HTML, images, SWF, etc.) into astoni in exactly the structure it was in with GL
4) create a new Dreamweaver site by defining astoni as the local location for my site, astoni\images as the location for images, etc.
5) use Dreamweaver and open the newly defined astoni site. Then open each of the GoLive components I copied into a content level folder in astoni, and drag each into the Dreamweaver Assets/Library pane, in order to create library items just like my old GoLive components
6) use Dreamweaver to Search & Replace out the unique text strings like xxxyyyzzz9 with the content of my new DW library items
7) refresh site view to make all the links hook up...
Thanks for your help. Hope this discussion helps others too...

Instead of ragging on people who are familiar with DW and Site Development, you should be gracious and accept the practical advice you've been given. A "best strategy" would be to read some tutorials and learn how to work with HTML, CSS and server-side technologies. Without some basic code skills, you're going to find DW an uphill, if not impossible battle.
Frankly, I don't have free time to hand-hold someone through the excruciating process of migrating a 5,000 page static site from GoLive to DW. And I doubt anyone else in this forum has either. We're not Adobe employees. We don't get paid to participate here. We are all product users JUST LIKE YOU.
I'm sorry you're frustrated. I'm also sorry for your clients. But the problem you have now isn't Adobe's fault. It's yours for not keeping up with server-side technologies or handing-off these huge static sites to more capable web developers. I'm not saying you need to buy anyone's books, but they are good resources for people willing to learn new things.
That said, maybe you should stick with GoLive. The software doesn't have an expiration date on it and will continue working long into the future. If you're happy using GL, keep using it to maintain your legacy sites. At the same time learn X/HTML, CSS & PHP or ASP. Use DW CS4 for the creation of new projects.
FREE Tutorial Links:
HTML & CSS Tutorials - http://w3schools.com/
From Tables to CSS Web Design Part 1 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt1.html
From Tables to CSS Web Design Part 2 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt2.html
Taking a Fireworks (or Photoshop) comp to a CSS based layout in DW
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
Creating your first website in DW CS4 -
http://www.adobe.com/devnet/dreamweaver/articles/first_cs4_website_pt1.html
Guidance on when to use DW Templates, Library Items and SSIs -
http://www.adobe.com/devnet/dreamweaver/articles/ssi_lbi_template.html
Best of luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

What is the use of Release Strategy for Sales Document

Hi,
Can i know what is the use of Release Strategy for Sales Document? Difference between lowest level and Highest level.

Hi,
Can i know what is the use of Release Strategy for Sales Document? Difference between lowest level and Highest level.
Lowest Status No: Sale Document can have several statuses at the same time. However, only one of the statuses may have a status number. If another status with a status number is activated; the old status with status number is deactivated. This is only valid under certain conditions. The system makes a note of the status with the highest status number that has been reached up to the present. The "lowest number" of this status number determines which status number a new status must have.
Highest Status No: Sales Document can have several statuses at the same time. However, only one of the statuses may have a status number. If another status with a status number is activated, the old status with a status number is deactivated, provided the new status number does not exceed the 'highest number' defined for the old status number
If you want more clarity try to check below link
http://www.sapfunctional.com/SD/ReleaseStrategy/Index.htm
Regards,
Prasanna

What is your strategy for form validation when using MVC pattern?

This is more of a general discussion topic and will not necessarily have a correct answer. I'm using some of the Flex validator components in order to do form validation, but it seems I'm always coming back to the same issue, which is that in the world of Flex, validation needs to be put in the view components since in order to show error messages you need to set the source property of the validator to an instance of a view component. This again in my case seems to lead to me duplicating the code for setting up my Validators into several views. But, in terms of the MVC pattern, I always thought that data validation should happen in the model, since whether or not a piece of data is valid might be depending on business rules, which again should be stored in the model. Also, this way you'd only need to write the validation rules once for all fields that contain the same type of information in your application.
So my question is, what strategies do you use when validating data and using an MVC framework? Do you create all the validators in the views and just duplicate the validator if the exact same rules are needed in some other view, or do you store the validators in the model and somehow reference them from the views, changing the source properties as needed? Or do you use some completely different strategy for validating forms and showing error messages to the user?

Thanks for your answer, JoshBeall. Just to clarify, you would basically create a subclass of e.g. TextInput and add the validation rules to that? Then you'd use your subclass when you need a textinput with validation?
Anyway, I ended up building sort of my own validation framework. Because the other issue I had with the standard validation was that it relies on inheritance instead of composition. Say I needed a TextInput to both check that it doesn't contain an empty string or just space characters, is between 4 and 100 characters long, and follows a certain pattern (e.g. allows only alphanumerical characters). With the Flex built in validators I would have to create a subclass or my own validator in order to meet all the requirements and if at some point I need another configuration (say just a length and pattern restriction) I would have to create another subclass which duplicates most of the rules, or I would have to build a lot of flags and conditional statements into that one subclass. With the framework I created I can just string together different rules using composition, and the filter classes themselves can be kept very simple since they only need to handle a single condition (check the string length for instance). E.g. below is the rule for my username:
library["user_name"] = new EmptyStringFilter( new StringLengthFilter(4,255, new RegExpFilter(/^[a-z0-9\-@\._]+$/i) ) );
<code>library</code> is a Dictionary that contains all my validation rules, and which resides in the model in a ValidationManager class. The framework calls a method <code>validate</code> on the stored filter references which goes through all the filters, the first filter to fail returns an error message and the validation fails:
(library["user_name"] as IValidationFilter).validate("testuser");
I only need to setup the rule once for each property I want to validate, regardless where in the app the validation needs to happen. The biggest plus of course that I can be sure the same rules are applied every time I need to validate e.g. a username.
The second part of the framework basically relies on Chris Callendar's great ErrorTipManager class and a custom subclass of spark.components.Panel (in my case it seemed like the reasonable place to put the code needed, although perhaps extending Form would be even better). ErrorTipManager allows you to force open a error tooltip on a target component easily. The subclass I've created basically allows me to just extend the class whenever I need a form and pass in an array of inputs that I want to validate in the creationComplete handler:
validatableInputs = [{source:productName, validateAs:"product_name"},
                     {source:unitWeight, validateAs:"unit_weight", dataField:"value"},
               {source:unitsPerBox, validateAs:"units_per_box", dataField:"value"},
                    {source:producer, validateAs:"producer"}];
The final step is to add a focusOut handler on the inputs that I want to validate if I want the validation to happen right away. The handler just calls a validateForm method, which in turn iterates through each of the inputs in the validatableInputs array, passing a reference of the input to a suitable validation rule in the model (a reference to the model has been injected into the view for this).
Having written this down I could probably improve the View side of things a bit, remove the dependency on the Panel component and make the API easier (have the framework wire up more of the boilerplate like adding listeners etc). But for now the code does what it needs to.

HT204350 The instructions for "Migrating using FireWire or ThunderBolt" are WRONG

The instructions for "Migrating using FireWire or ThunderBolt" in this article are wrong for a transfer from a Mountain Lion Mac to a Mavericks Mac. You should not put the source Mac in target disk mode. Rather, you should start up Migration Assistant on the source Mac and choose "To another Mac"

Apple doesn’t routinely monitor the discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Want to read a Query list of results into a defined variable "as Collection" for later use (ie create reports)

The following code works great (Functions Main and OpenThisFile ) to select files from a folder and read into defined variable "FileToProcess As Collection" (I guess then renamed fil) and use that list of files to run through
an import process defined in a function "StartMe".
What I want to do is read the results of a query into a similar collection variable and then use in a function like "StartMe" to run a series of reports. The functions to do that below (PrintCKListTables and ReadQueryOfSDGs) currently
don't work erring out "For Each s In .selectedQuery".  I would appreciate any help guiding me how to fix function
      ReadQueryOfSDGs() As Collection
Thank you very much in advance for your help!
Public Function Main()
Dim FilesToProcess As Collection, fil
Dim initialFilePath As String
initialFilePath = CreateObject("WScript.Shell").specialfolders("C:\temp")
Set FilesToProcess = OpenThisFile(initialFilePath)
For Each fil In FilesToProcess
StartMe fil
Next fil
End Function
Public Function OpenThisFile(initialFilePath As String) As Collection
'Requires reference to Microsoft Office 12.0 Object Library.
Dim fDialog As Office.FileDialog
Dim varFile As Variant
'Clear listbox contents.
'Me.FileList.RowSource = ""
'Set up the File Dialog.
Set fDialog = Application.FileDialog(msoFileDialogFilePicker)
With fDialog
'Allow user to make multiple selections in dialog box.
.AllowMultiSelect = True
.InitialFileName = initialFilePath
'Set the title of the dialog box.
.Title = "Please select one or more files"
'Clear out the current filters, and add our own.
.Filters.Clear
.Filters.Add "XML Files", "*.XML"
'Show the dialog box. If the .Show method returns True, the
'user picked at least one file. If the .Show method returns
'False, the user clicked Cancel.
If .Show = True Then
'Loop through each file selected and add it to the list box.
Dim s
Set OpenThisFile = New Collection
For Each s In .SelectedItems
OpenThisFile.Add s
Next s
Else
MsgBox "You clicked Cancel in the file dialog box."
NotContinue = True
End If
End With
End Function
Public Function PrintCkListTables()
    Dim FilesToProcess As Collection, fil
    Dim ListSDGs As String
    Set FilesToProcess = ReadQueryOfSDGs(ListSDGs)
    For Each fil In FilesToProcess
        fNameExportpdfReport (fil)
    Next fil
End FunctionPublic Function ReadQueryOfSDGs() As Collection       DoCmd.OpenQuery "y_qs_DataIn_All_SDGList"
       Dim s
       Set ReadQueryOfSDGs = New Collection
       For Each s In .selectedQuery
       ReadQueryOfSDGs.Add s
       Next s
End Function

There are a few problems here. In function PrintCkListTables() you define a string variable ListSDGs and then use that as an argument to the function ReadQueryOfSDGs(), but ReadQueryOfSDGs() as written does not accept any arguments. It's also not clear
what ListSDGs represents...a list of files, names of queries? Also, the line
For Each s In .selectedQuery in
ReadQueryOfSDGs()
references something called .selectedQuery which is undefined.
Is it that you want ReadQueryOfSDGs() to loop through the records returned by a query and add a field from each record to a collection? If so, something like the following might better serve you:
Public Function ReadQueryOfSDGs() As Collection
    Dim C As New Collection
    Dim rst As DAO.Recordset
    Set rst = DBEngine(0)(0).OpenRecordset("y_qs_DataIn_All_SDGList", dbOpenForwardOnly, dbReadOnly)
    Do Until rst.EOF
        C.Add rst!MyField ' where MyField is the field in y_qs_DataIn_All_SDGList you want to add to your collection
        rst.MoveNext
    Loop
    rst.Close
    Set rst = Nothing
    Set ReadQueryOfSDGs = C
End Function

How to get the exact sql developer which used for data migration?

Hi all,
Hope doing well,
Sir i seen a link for data migration that is : http://www.oracle.com/technetwork/developer-tools/sql-developer/sql-server-connection-viewlet-swf-089886.html
in this link when they are connecting to sql database so after clicking on new connection four tab is showing that is oracle, access, my sql, sql server.
i downloaded latest version of sql developer which version is: 3.02.09.30 when i opened this i am not getting those option.
and one more thing i am not getting miragation menu name in menu items.
please help me.
thanks and regards

Hi,
To connect to non-Oracle databases from SQL*Developer youneed to download the relevant JDBC driver.
This is detailed in the documentation in the User Guide -
http://docs.oracle.com/cd/E35137_01/appdev.32/e35117.pdf
in the section -
Database: Third Party JDBC Drivers
The Third Party JDBC Drivers pane specifies drivers to be used for connections to third-party (non-Oracle) databases, such as IBM DB2, MySQL, Microsoft SQL Server, or Sybase Adaptive Server. (You do not need to add a driver for connections to Microsoft Access databases.) To add a driver, click Add Entry and select the path for the driver:
■For IBM DB2: the db2jcc.jar and db2jcc_license_cu.jar files, which are available from IBM
■For MySQL: a file with a name similar to mysql-connector-java-5.0.4-bin.jar, in a directory under the one into which you unzipped the download for the MySQL driver
■For Microsoft SQL Server or Sybase Adaptive Server: jtds-1.2.jar, which is included in the jtds-1.2-dist.zip download
■For Teradata: tdgssconfig.jar and terajdbc4.jar, which are included (along with a readme.txt file) in the TeraJDBC__indep_indep.12.00.00.110.zip or TeraJDBC__indep_indep.12.00.00.110.tar download
To find a specific third-party JDBC driver, see the appropriate website (for example, http://www.mysql.com for the MySQL Connector/J JDBC driver for MySQL, http://jtds.sourceforge.net/ for the jTDS driver for Microsoft SQL Server and Sybase Adaptive Server, or search at http://www.teradata.com/ for the JDBC driver for Teradata). For MySQL, use the MySQL 5.0 driver, not 5.1 or later, with SQL Developer release 1.5.
You must specify a third-party JDBC driver or install a driver using the Check for Updates feature before you can create a database connection to a third-party database of that associated type. (See the tabs for creating connections to third-party databases in the Create/Edit/Select Database Connection dialog box.)
Regards,
Mike

No HTTP port defined in Exchange Profile for sld

Hi all,
During the BI and portal connectivity, we successfully executed the template installer, however, we have not yet imported the abap and related sp from SAP note.
After successful execution of template installer or CTC, we ran the supportdesk tool resolved errors and are left behind with two errors as below.
ERROR 1. RED BI Mastersystem
Message:
Error while connecting to BI mastersystem via RFC: Checks related to ABAP information cannot be executed because an outdated version of function module RSPOR_SETUP_CHECK is implemented. Please implement the recent version of note 937697.
Solution:
Check connection properties in Portal Systemlandscape for the property category 'Connector' (Systemlandscape/SAP_BW)
Issue: Now looking at connector properties that are set by CTC are complete and set. Connection Test for both Connector and SAP Web AS Connection are successful, only ITS is neither setup by template nor by us. Please suggest how to resolve this.
ERROR 2. RED Error in Check Class: com.sap.ip.bi.supportdesk.checks.impl.MultipleUserMappingCheck
(Error during retrieval of inverse user mapping for ABAP user 'null': No backend user ID provided for inverse user mapping. com.sapportals.portal.prt.runtime.PortalRuntimeException:...)
Looking at log file server<#>/log/defaultTrace.trc it points the following error:
No HTTP port defined in Exchange Profile for sld.BIW.bcs AND
Error reading from AII properties for sld.BIW.bcs
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.rb_exception.MESS_INVALLD_PARAMETER_VALUE
com.sap.aii.utilxi.misc.api.InvalidArgumentException: Parameter httpPort has the invalid value null
Issue: Checking we find that ICM is running with correct dns and port 8000 (http), only smtp is holding port 0. Where do we maintain http port for sld? Kindly suggest.
Finally the support desk tool is leaving the following checks with status UNDEFINED, would this impact the connectivity?
1.   UNDEFINED Deployed Components
2.   UNDEFINED Export check (PDF lib, ADS, ...)
3.   UNDEFINED Synchronized Clocks on WebAS Java and ABAP
4.   UNDEFINED URLs Prefixes Customized on Both J2EE and ABAP Side
5.   UNDEFINED WebAS ABAP Certificate and Login Modules Configuration
6.   UNDEFINED WebAS ABAP Settings
Looking at support desk tool and RSPOR_SETUP I notice the errors in RSPOR_SETUP appear green in support desktool such as User mapping (step 12) appears green in support desktool but red in RSPOR_SETUP.
Please suggest.
Best regards.

Hi,
If Support desk tool is showing some of the components undefined, than there may be posisbility that your ABAP BI and BI JAVA patch may not in sync.
ABAP BI and BI JAVA works only with specific patch set combinations. I will suggest that please refer to below note and correct the patch level, if required. Once the patch level is corrected, please run the support desk tool again, you will see new picture in support desk tool.
"SAP Note 1013369 - SAP NetWeaver 7.0 BI - intermediate Support Packages"
With Regards,
Saurabh

Warning: "No terminating events defined for the task used"

Dear all,
I created a task with ABAP class and method as its object method. This task is a background task. The ABAP class inherits the IF_WORKFLOW interface but doesn't implement any method of the interface.
When I try to confirm the task settings in transaction SWDD, a message shows up "No terminating events defined for the task used" and I cannot continue the work. Does anybody have any idea what I should do?
Thanks + Best Regards
Jerome

Hi Jerome,
If you set a background task in your workflow, and if it is asynchronous, then you need some way to tell the template if it is finished and what happened. In this case you set terminating events - that is events which are published in the system as a result of your method (ie document.posted etc).
Either use a synchronous method for your task or set appropriate terminating events in your task setup.
Regards
Gareth

Cannot construct URL for runtime check using entries in SLD

Hi,
we are using high availability for PI 7.1 and are facing to the problem to construct the url for Communication channel monitoring etcv. in rwb.
In the exchange profile it looks good. Is there another place to check parameters for sld?
Thanks in advance
Frank
Message: Cannot construct URL for runtime check using entries in SLD for component af.rbi.s3p1028; correct the entries in SLD
Stacktrace:
com.sap.aii.rwb.exceptions.OperationFailedException: Cannot construct URL for runtime check using entries in SLD for component af.rbi.s3p1028; correct the entries in SLD
at com.sap.aii.rwb.core.XIJavaRTCComponent.getConnector(XIJavaRTCComponent.java:211)
at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:623)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:428)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:528)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:555)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:484)

Hello
A combination of the notes below should resolve this error:
#764176 Error in XI due to inconsistent SLD contents
#1117249 Incomplete Registration of PI components in SLD
#1334053 No automatic PI 7.10 SLD Registration
#1278563 Specification of message server host in Exchange Profile
Regards
Mark

Define Derivation Strategy for Control Objects - Value Not Transport

I created Rules Value in Define Derivation Strategy for Control Objects (SPRO). Then, I perform the below steps for Transport the Request to other client.
1. Select Derivation Strategy name, Table View > Transport
2. Select Request Number
3. Click Include in Request, then save
4. Go to the Steps in Logical Order, Extras > Transport
5. Select Request Number and back to SPRO screen
After SCC1, there is only Derivation Strategy Name appeared but the rules value (Steps in Logical Order) is not appeared.
How can I transport the Rule Value?
Regards
Ton

Hi,
When you are in the derivation transaction and select to transport it, the system asks you whether you want the values to be transported as well. If you choose 'yes' your change request will include this information.
Regards,
Eli

Defining an SLD Strategy for XI Migration using CMS

Similar Messages

Maybe you are looking for