Defining budget after the commencement of activity 8.81

Hello experts,
In the "How To Mg Budgets 88.pdf' page 18 under section 'Defining budget after the commencement of activity' it states that when a budget is defined the system will ask 'Do you want to restore the accounts accumulators?'.
This does not happen except for the Main budget. Is this correct system behavior? My customer will not use the Main Budget but instead each budget has a defined profit center and project; Main Budget can not have those values.
My concern is that this may affect budget reports. If the accumulator is only used for checking budget deviation then no problem, they are aware that that check is only made against the main budget.
8.81, patch level 5, US localization
Thanks for your thoughts,
Beverly

Hello Beverly,
For your question:
This does not happen except for the Main budget. Is this correct system behavior?
The answer is yes.
Only Main budget is used for real calculation. All others are only scenarios to do what-if analysis.
Thanks,
Gordon

Similar Messages

FileReceiver communcation channel inactive even after the status is Active

Hi,
i am not able to find whats the problem. i have activated the communation channel and the status is also Active. still when i do a CC monitoring it shows as the CC is inactive.
i have refereshed the cache.
CPA referesh is also done
modified and activated again and again
object is not locked
can some one tell what can be the problem

HI Deepika,
Is the yellow status is just for your CC or for all File receivers ?
If its just in your case, try to create a new Receiver CC and see if it helps.
Thanks,
Pooja Pandey

Is it possible to change the name of the characteristic after the PA is act

Is it possible to change the name of the characteristic after the PA is activated?
If yes what should I do?

Hi,
yes its possible and it works in the same way as the creation of a new characteristic / assigment to an up- and running operating concern.
Thats because the "name" of a characteristic is not stored in a text table but it is the field label of the data element.
Search in the SDN forum if you are unsure how to do that.
Best regards, Christian

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

Have you tried to reboot your phone(hold home and lock button simutainiously)?

HT201407 Per the "Completing Authorized iPhone Unlock" instructions, I connected to iTunes to back up and restore so my iPhone can be unlocked! But after the restore my iPhone is stuck at the activation screen, it will not activate.

Received an authorized unlock code from apple/AT&T for my off-contract 3GS (8GB). Per the “Completing Authorized iPhone Unlock” instructions, I connected to iTunes to back up and restore so my iPhone can be unlocked! But after the restore my iPhone is stuck at the activation screen, it will not activate saying “Your iPhone cannot be activated because the activation server is temporarily unavailable”. I tried this again and again for countless times, no way! I have my old AT&T simcard and other carrier’s simcard. Both will not help. Please help me to activate and start using my phone.

Hello,
I got like the same problem, last days I get message to restore my iPhone, so I did it yesterday and it work very well. In the afternoon I saw that at top in the left corner show invaild sim card or so (only knew the german version). so I restore it again but now it won`t activate after I enter SIM-PIN and it accept it, it shows "No Service".
Anybody can help? My Carrier is o2 Germany.
Thanks!

What do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

Season Pass - Still active after the season is completed

Some time ago I purchased a pass for the first season of Breaking Bad.
After seven episodes the season was officially over.
However, the season pass remains active (it still is).
When I want to switch to a different iTunes store (different counry), iTunes tells me that it is not possible as long as I have active season passes.
Is a season pass supposed to expire/end automatically after the respective season is complete?
If it is supposed to be this way, how can I close/end my still active season pass.
Thank in advance for the help

Hi Girish,
My bad, forgot to put all the required info in the post. Sorry about that.
Database 10.2.0.2.0 - enterprise, Linux OS. I have enough SGA (64gb), PGA, undo, temp tablespace space.
The select is a "normal" read only select that needs to read millions of blocks from data files. The main table is partitioned and the waits are on reading data from partitions. In v$session the main session and the child processes are marked as killed.
In v$lock I see that the wait is on db read scan. Everything is working. That's actually my issue.
Why it's still querying data/reading from disk when I killed all the sessions.
Doesn't Oracle stop the processes associated with a killed session?
I killed the session: alter system kill session 'sid,serial';
Do you think "alter system disconnect session 'sid,serial' immediate" is better?
What I don't understand is how can I stop fast (ok I get that it can not happen in a few seconds) a query that is only read only that is running for too long. When I kill a session I was expecting the processes associated with it to stop. In a update/insert/delete, the server will wait for the rollback, but this is not changing data.
If you think more debug is necessary I will upload on Monday AWR and all the statistics I collected. I am not in the office now.
Thanks,
Daniel

Using Firefox 3.6 after a few mouse click/ keyboard input the firefox window is no more active, mouse click and keyboard input is inactive ; then I click on the taskbar and the keyboard is active again during a few click then it stops again etc.

Using Firefox 3.6 after a few mouse click/ keyboard input the firefox window is no more active, mouse click and keyboard input is inactive ;
to solve it I click on the taskbar and the keyboard is active again during a few click then it does not work any more and I click again on the task bar etc.
after several repetitions, I have to call the task manager alt+del+ctrl, then come back to the firefox window to be able to use keyboard and mouse again

Attaching the picture for the tab shape I want...

Hi I update my I Phone 3 GS for IOS 6.1. but he asking activate Iphone after we process for activation he shown error. please do the needfull

hi I update my I Phone 3 GS for IOS 6.1. but he asking activate Iphone after we process for activation he shown error. please do the needfull

Try to restart or - if necessary - to restore the iPhone:
See this document: iPhone: Troubleshooting activation issues
Disable your Firewall and Antivirus software - it may be blocking the access to the server. Wait a day, maybe the server is down.
If your iPhone cannot be activated, because it has been modified, we cannot help, see: http://support.apple.com/kb/HT3743

I am having problems launching the standalone version of Lightroom 6 after I have gone through the install and activation process? Lightroom starts to open but "hangs" before any photos in the catalgue are displayed. I have contacted the chat support twic

I am having problems launching the standalone version of Lightroom 6 after I have gone through the install and activation process? Lightroom starts to open but "hangs" before any photos in the catalgue are displayed. I have contacted the chat support twice but they have not been able to fix the problem.

I went through the activation process yesterday and shut down my PC when I went to bed last evening. When I got up this morning and turned my PC on and then started Lightrom 6 (I upgraded from version 5) it started to launch but then just hung and became "not responsive". I I then uninstalled and then reinstalled the product today but the same thing happened. What is weird is that when I install from the standalone file I downloaded when I purchased the upgrade it looks like it's downloading the software again over the Internet? I have been having these problems for the last four or five days. I have contacted the chat support folks twice and they were able to get it working but whatever they did did not last as the problem reappeared again once the PC was shut down and then started up again.

Help!!! After the transition to iOS7 not activated!!!

Hello. After the transition to iOS7 not activated prishet iphone 4s sim card is invalid, before all was in order. MD242DN/A S/N DNYAGM9U3DT7

Hi James,
Thanks a lot for the clarification. But I feel that the volume of my device has got reduced.
Thats the reason why most of them are complaining like their speaker is not working.
Will there be any reason for this issue related to ios7. I hope there should be something to be fixed to enhance the volume via an another update.
Thanks.

After the currently active tab is closed, can the previously acitve tab be automatically displayed?

After the currently active tab is closed, I don't want to see the tab on its right or on its left. I want to see the tab that was active before the closed one, whatever its position is on the tab strip.
Can that be achieved?

My trackball has 4 buttons and a scroll wheel. Each of the 4 buttons is programmable. The 4 buttons are normally pre-programmed for single-click, double-click, drag and right-click by simply pressing on them
Each of the 4 buttons may be programmed to also have other functions. For example, I programmed "control/single-click" to produce a middle click. I could also have used "shift/single-click" or "alt/single-click" to produce the middle-click. Or I could have similarly programmed double-click or drag or right-click. The Kensington Expert Mouse is quite versatile ... once you get the hang of programming it.
I have had it for about 4 years and I had never had the need to program one of them until you told me about using a middle-click.
Milt Beychok

JMS subscription stays active after the Flex client exits

Folks,
I have BlazeDS deployed in Tomcat 6.0.18. My Flex UI application
subscribes to a JMS Topic in GlassFish.
My problem is that the JMS subscription stays active after the
Flex client exits.
Can I add code to handle this scenario? Shouldn't BlazeDS pick this up
automatically when the TCP connection closes?
Thanks,
Shane

Hi Shane,
I think this question is answered by my response to the following post:
http://www.adobeforums.com/webx/.59b7c936/2
-Alex

My headphones have broke for the third time will apple replace them after the third time (my warranty is still active)

my headphones have broke for the third time will apple replace them after the third time (my warranty is still active)

So i am likely to get new headphones? & yeah personally i think i do handle them with care, i have no idea how they keep messing up. Btw thank you for the reply.

Defining budget after the commencement of activity 8.81

Similar Messages

Maybe you are looking for