Defining End point

Hi all,
I have a standalone XI 2.0 and my scenario is
file - XI - idoc (R/3)
i have the flat file in my XI box and im using inbound file adapter.
but i have a problem in defining the end point .
im getting an error message like
end point not defined for the sender system
my sender system is XI and my receiver system is R/3
im using file inbound adapter and idoc outbound adapter.
i have defined the end point for the receiver system as idoc.
wht will be my sender system endpoint .
if any has any idea pls help me.
thankx,
shree

Hi Shree,
Yes, it's true that in your case the flat file my in fact reside on the XI machine. However, from an XI point of view, you must still register the file adapter first within the SLD and then do the appropriate configuration within XI as Bjorn mentioned. Consider a situation where you may have a file to file scenario with XI performing transformation in the middle...in this case you need two "logical" systems here even though they are installed on the same physical box. One for the first file adapter instance and another for the second file adapter instance.
Good luck!!!
...Scottd

Similar Messages

End point error

I m facing the following error when I process a file using the file adapter .
my system is a standalone XI box, im file inbound adapter and idoc outbound adapter.
For inbound interface I have imported the idoc interface from R/3 and for outbound interface(file adapter ) I have created the message interface in the repository and using it in the directory.
I have defined an inbound interface in the directory and defined the end point as idoc adapter.
Do I need to define the endpoint for the outbound interface (file adapter)
Please let me know where is the problem

Hi Homiar,
Thankx for the reply i have resolved the problem ..
but my idoc is created with no data in it .. has only the value of the segment like
<ORDERS04>
- <IDOC BEGIN="1">
<E1EDK01 SEGMENT="1" />
</IDOC>
</ORDERS04>
iam not sure whr is the problem .. idoc is created with red light and it says partner profile not found but i have defined the partner profile..
please let me know if u have any idea abt this..
thankx,
shree

End Point Reference Error

Hi,
We are working on a project where SAP system will be integrated with Intalio BPM suite. When we try to create a sales order from Intalio, we are getting "End Point Reference Error" . We are using "BAPI_SALESORDER_CREATEFROMDATA" to create the sales order.
When we tried with "BAPI_SALESORDER_CREATEFROMDAT2" we are not able to map the partner details to the BAPI parameters as it is not displaying the existing parameters under the "Order_Partner_In" head.
Also it will be great if someone can provide us with the mandatory fields for "BAPI_SALESORDER_CREATEFROMDAT2" as we are not able to create the sales order with the following mandatory inputs.
ORDER_HEADER_IN : DOC_TYPE     Sales document type
                  SALES_ORG    Sales organization
                  DISTR_CHAN   Distribution channel
                  DIVISION     Division
ORDER_PARTNERS..: PARTN_ROLE   Partner role, SP sold-to party
                  PARTN_NUMB   Customer number
ORDER_ITEMS_IN..: MATERIAL     Material number
Please help us in resolving this issue.

Hi Homiar,
Thankx for the reply i have resolved the problem ..
but my idoc is created with no data in it .. has only the value of the segment like
<ORDERS04>
- <IDOC BEGIN="1">
<E1EDK01 SEGMENT="1" />
</IDOC>
</ORDERS04>
iam not sure whr is the problem .. idoc is created with red light and it says partner profile not found but i have defined the partner profile..
please let me know if u have any idea abt this..
thankx,
shree

Trading partner - End Point URI

Hi,
I have trying to creat a B2B application based on similar lines as the Buyer Supplier
workflow provided as the part of the samples.
Now, when I am defining the trading partner, I need to define the end point URI.
I believe this is some entity (probably) a servlet, that listens to requests fro
other trading partners. Now the enity that I entered here, should I create it or
doe the integration platform create it for me.
I feel that its not getting created, because when defining the CPA, and when trying
to enable it, the B2B server front end hangs. There is a log though in the log file.
INFO: Collaboration Agreement test/163.122.33.185:5a6c6b:edfce8a856:-8000 is successfully
enabled in Collaborate Server.>
INFO: Collaboration Agreement test/163.122.33.185:5a6c6b:edfce8a856:-8000 is registered
successfully
Now, are these two problems related.
Thanks and regards
RAD

Again after this I was getting Document Protocol Error, and PROTOCOL_ENDPOINT = null
I came to know from dheeraj's reply that these errors are only due to me bad payload.
In document Editor if we say generate the data, actually the data is not valid data, I opened the .dat file in Document Editor analyser and it showed me the errors.
I corrected teh errors, and now I am still getting error "5016: A mandatory data element is missing"
Segment ISA(Interchange Control Header) at guideline position (N/A) is missing.
I am still checking with the payload for the validation against the ecs file.
Thanks Dheeraj for your answer, I got some confidence.

PSTN to Lync end points

Hi everyone,
our setup is PSTN to Mediatrix to Lync which works well.
I can dial out from Lync end point to the PBX/PSTN local, long distance and International
However I can receive calls to the Lync end point.
My URL address in Lync control panel is +1234567891;ext=7xxx
If it works one way shouldn't it work the other way.
I have heard of something called RNL ( reverse number lookup ) but how does this apply to myt set up.
Please assist.

Hi,
The Inbound call issue often caused by lack of voice route or some wrong configuration on the Trunk configuration such as translation rule or pattern, would you please check the following link about trunk deployment?
http://technet.microsoft.com/en-us/library/gg398755.aspx
Which protocol did you use (TLS or TCP)?
IF you use TCP, please double check if you defined the port correctly when defining the gateway in the Lync topology builder.
More details:
http://technet.microsoft.com/en-us/library/gg398833.aspx
Please also make sure the dial plan is correct. All phone numbers coming inbound to Lync should be normalized to the E.164 format.
If the issue persists, you can use the Lync server logging tool on FE server and Mediation server.
Here is the link of using the Lync logging tool:
http://blog.schertz.name/2011/06/using-the-lync-logging-tool/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found
there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Problem getting parameter values at the service end point

I am having problem getting parameter values at the service end point. I created service end point and this method is having 35 parameters and then i created test client file using Sun One Studio 5. but when i run this test client and make a call to service it sends wrong value to first three parameters to the service end point. I tried all the way round but it gave me same sort of problem. I change the order of parameters change the names of parameters but it didn�t work. And then i started chopping of parameter from the left side. And my problem is solved when my parameter list reached to 12 from 35. So is it a bug or some problem with my configuration or some thing else.
I am using sun one studio 5 with sun one app 7. My service end point does very simple thing. It only takes out put of the parameter to the server log file. And my wsdl file seems all right. There is no conflict with the count and data type of the parameter information it contains.
�     Service End Point Definition (in EJB)
public java.lang.String setNewAddress(java.lang.String propertyName, java.lang.String status, java.lang.String PMSCode, java.lang.String streetNumPrefix, int streetStartNum, java.lang.String streetStartNumSuffix, int streetEndNum, java.lang.String streetEndNumSuffix, java.lang.String streetName, java.lang.String streetType, java.lang.String streetSuffix, java.lang.String localityPrefix,java.lang.String localityName, java.lang.String postcode, java.lang.String stateCode, java.lang.String countryCode, java.lang.String description, java.lang.String coordinateAccuracy, int longitude, int latitude, java.lang.String planNumber, java.lang.String lotPrefix, int lotNumber, int siteID, java.lang.String countryName, java.lang.String parishName, java.lang.String section, int portionNum, int crownAllotNum, int titleVol, java.lang.String folio, java.lang.String esa, int aliasID, int aliasTagID,String ID) {
System.out.println(propertyName);
System.out.println(PMSCode);
System.out.println(streetNumPrefix);
........ taking printout of all the paramters
�     This is my WSDL file
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="NMService" targetNamespace="urn:NMService/wsdl" xmlns:tns="urn:NMService/wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types/>
<message name="NMServiceServantInterface_setNewAddress">
<part name="String_1" type="xsd:string"/>
<part name="String_2" type="xsd:string"/>
<part name="String_3" type="xsd:string"/>
<part name="String_4" type="xsd:string"/>
<part name="int_5" type="xsd:int"/>
<part name="String_6" type="xsd:string"/>
<part name="int_7" type="xsd:int"/>
<part name="String_8" type="xsd:string"/>
<part name="String_9" type="xsd:string"/>
<part name="String_10" type="xsd:string"/>
<part name="String_11" type="xsd:string"/>
<part name="String_12" type="xsd:string"/>
<part name="String_13" type="xsd:string"/>
<part name="String_14" type="xsd:string"/>
<part name="String_15" type="xsd:string"/>
<part name="String_16" type="xsd:string"/>
<part name="String_17" type="xsd:string"/>
<part name="String_18" type="xsd:string"/>
<part name="int_19" type="xsd:int"/>
<part name="int_20" type="xsd:int"/>
<part name="String_21" type="xsd:string"/>
<part name="String_22" type="xsd:string"/>
<part name="int_23" type="xsd:int"/>
<part name="int_24" type="xsd:int"/>
<part name="String_25" type="xsd:string"/>
<part name="String_26" type="xsd:string"/>
<part name="String_27" type="xsd:string"/>
<part name="int_28" type="xsd:int"/>
<part name="int_29" type="xsd:int"/>
<part name="int_30" type="xsd:int"/>
<part name="String_31" type="xsd:string"/>
<part name="String_32" type="xsd:string"/>
<part name="int_33" type="xsd:int"/>
<part name="int_34" type="xsd:int"/>
<part name="String_35" type="xsd:string"/></message>
<message name="NMServiceServantInterface_setNewAddressResponse">
<part name="result" type="xsd:string"/></message>
<portType name="NMServiceServantInterface">
<operation name="setNewAddress" parameterOrder="String_1 String_2 String_3 String_4 int_5 String_6 int_7 String_8 String_9 String_10 String_11 String_12 String_13 String_14 String_15 String_16 String_17 String_18 int_19 int_20 String_21 String_22 int_23 int_24 String_25 String_26 String_27 int_28 int_29 int_30 String_31 String_32 int_33 int_34 String_35">
<input message="tns:NMServiceServantInterface_setNewAddress"/>
<output message="tns:NMServiceServantInterface_setNewAddressResponse"/></operation></portType>
<binding name="NMServiceServantInterfaceBinding" type="tns:NMServiceServantInterface">
<operation name="setNewAddress">
<input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></input>
<output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></output>
<soap:operation soapAction=""/></operation>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/></binding>
<service name="NMService">
<port name="NMServiceServantInterfacePort" binding="tns:NMServiceServantInterfaceBinding">
<soap:address location="http://localhost:80/NMService/NMService"/></port></service></definitions>
�     I followed steps given this example. http://developers.sun.com/prodtech/javatools/jsstandard/reference/docs/s1s5/stockapp.html.
If some one know what is wrong. Is it me or some thing wrong with the method I followed. But I am sure that I followed exactly the same method as it given in examples. So if some one can guide me
Thanks

I just found that there is a bug with Sun One Studio 5. It creates faulty JSP file to test the client for the web services. With above problem I tested my web services using different developing environment such as Jdeveloper 10g. I created client stub using wsdl file generated by sun one studio. And made call to my web service and all the parameter reached perfectly at service end point. And then I used stub class created by sun one studio for the client and made the same call. And it also went well. So the problem is with the test application (JSP File) sun one creates for my web service.
This is the majore problem i faced during the development. But still there is many problem along with this which is not seriouse enough but requires attension. I would like sun developers to make sun one studio IDE simpler and handy .

When using option right/left arrow in clip trimmer end point handle won't stick

From the help menu:
In the Clip Trimmer, do either of the following:
Drag the handles at either end of the yellow clip selection to set a new startpoint and endpoint.
Move the handles one frame at a time by placing the pointer near the handle that you want to adjust, and then holding down the Option key as you press the Left Arrow or Right Arrow key.
Move the entire yellow selection box to the left or right by pressing the Left Arrow or Right Arrow key, or by clicking within the box and dragging. Using this technique, you can change which video frames are selected without changing the duration of the selection
End of help menu clip
The bug I've found is that when I place the pointer near the end handle I can hit option arrow and trim the end one frame forward or backwards but when I then hit option arrow a second time the start handle is trimmed. Thus it is hard to quickly option arrow the end handle trim multiple frames without having to move the pointer each time before hitting option arrow. Trimming the start point handle works like I would like as I can just keep hitting option arrow and the start point handle will trim a frame each time. The end point handle should work the same way but it doesn't. I'm on the latest ver 9.02

Tea,
One thing you can do to help yourself out is to create bookmarks to give you a visual reference for the beats in the music.
You create a bookmark by choosing Bookmarks>Add Bookmarks or by typing command-b.
So you can place your song in the timeline and then play it while tapping out command-b's to the beat of the music. You'll then have little green diamonds in the timeline to use as reference points.
Similarly, you can choose View>Show Audio Waveforms to identify the beats in the music by seeing the peaks in the waveforms.
These techniques should make it a bit easier to make your edits in time with your music.
Keep in mind though, that your movie is built from left to right in the time line. When you edit a clip your clips will always slide in to take up any space to the left of the clip.
When they do that, you can slide them apart again. Doing so will create a clip of black between them that can later be replaced.
One last thing to mention. If you select your music track and then choose Advanced>Lock Audio Clip at Playhead you can then slide a clip around and the locked audio will move with it.
It's a bit quirky I've found, but may also be useful.
Matt

Error while creating the end point ICMON_UI_WS - SP11

Hi All,
We have upgraded the SAP Solution Manager 7.1 SP04 to SP11.
Currently i am working on system preparation.
solman_setup -> System preparation -> 5.3 Enable Web Services getting the below error
CX_URLAPI_URL_EXCEPTION : Error during End Point creation
Long Text(1)
Error during End Point creation.
Text(2)
CX_SRT_WSP_CONFIG : Error when reading variant "ICMON_UI" of service
definition "ICMON_UI": Web service object does not exist
Also checked the note :1900781 - Missing services required by Solman Setup System Preparation Step 4.3 Enable Web Services.
But this note is available for download.
Any idea about this issue.
Rg,
Karthik

Hi
Try out these point
1. Take the backup of the folder .dtc ,.dtr in your home directory.Delete .dtr & .dtc folders in your directoryt,hen try to create it.
2.Check NWDS, WebAS, NWDI, and its compatability ? Which versions are you running now?
3. [Connect to DTR Fails |http://help.sap.com/saphelp_erp2005/helpdata/en/69/21244134a56532e10000000a1550b0/frameset.htm]
4 . See the Note : 939041 & 772755
Best Regards
Satish Kumar

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

BPEL End Point URL using External Load Balancer URL

Hi All,
We have Oracle SOA Suite installed in a clustered environment as per the Enterprise Deployment Guide 10g Release 310.1.3.3.0 E10294-02.
I have deployed a BPEL process to the clustered environment and the end point refers to the internal url of the load balancer e.g. http://internallink:8001/orabpel/default/testService/1.0
When we just paste this end point in a browser, enter the parameters and click on invoke, the BPEL Process gets invoked.
However, if we try to use the external url(which is on https) of the load balancer as the enpoint url eg https://externallink/orabpel/default/testService/1.0 to invoke the same BPEL process, the page which is used to accept the parameters and the used to invoke the BPEL process is successfully displayed. However, when we try to invoke the service, the connection times out.
Please note that internallink and externallink are the internal and external VIPs, respectively.
Does someone have an idea of what may be wrong or what needs to be corrected to be able to invoke the BPEL process using the external VIP, please?
Thanks in advance.

Check if the port of ESB in your server is open.
I think that the port is: 7777
try from ESB server:
wget WSDLURI
if you got the file then the port is closed.

Is there any way to achieve dynamic end point in SOA 11g (non-AIA process)

Hi,
We are using SOA Suite 11.1.1.5.0 and we are not using AIA product..Is there any mechanism to achieve dynamic end point?If so can you please tell me how we can achieve this.
Thanks in advance.

Hi All,
We can achieve dynamic end point in oracle soa suite 11g
Check the below link
https://blogs.oracle.com/ateamsoab2b/entry/invoking_web_services_dynamically_in
regards
Shankari

End Point URI change in Business service?

Hi all,
We had done all our osb code development and moving from one environment to other(Eg. E2E testing to UAT, Then UAT to Production). When we move the codes from one server to the other we need to change the End Point URI in the business service for almost all the OSB services which calls external systems else Calling BPEL services. SO is there any other way to make the end point URI's in some other file and read that file to get the end point URI and set in BS. Or did any one have any other suggestions?? Because each and every time we need to make the code change when we move on from one server to other.
Regards,
Prabhu

Why don't you use customization file -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15867/customization.htm#CACJCAGD
Regards,
Anuj

Issue with variable while in a PSSession connected to an end point

Ok so Ive put together a simple script that will allow our helpdesk to look at permissions on a specified folder or share adn display in a nice html page. I need it to run under different credentials so I set up an endpoint which I can connect to remotely
and run the script. The issue is in the variable that needs to get set. It prompts for the folder location and once you put it in, it just freezes up. If I run the script locally its fine and works perfectly. but running it in the remote
session connected to an end point, it just doesnt do anything once you put in the information after it prompts you. For testing also I set the $folderpath to a specific path and it does run fine through a remote session so its just an issue passing
that input back to the variable while in the remote session. Any idea?
$a = "<style>"
$a = $a + "BODY{background-color:peachpuff;}"
$a = $a + "TABLE{border-width: 0px;border-style: solid;border-color: black;border-collapse: collapse;}"
$a = $a + "TD{border-width: 3px;padding: 5px;border-style: solid;border-color: black;background-color:PaleGoldenrod}"
$a = $a + "</style>"
$folderpath = Read-Host -Prompt "Enter full folder path here"
$cname ="Permissions for $folderpath : "
Get-Acl $folderpath | select access -ExpandProperty access| select identityReference | ConvertTo-HTML -head $a -body "<H2>$CNAME</H2>" | Out-File \\server\PermReports\perms.html

Here's some napkin code, FWIW
On the user side:
$Session = New-PSSession -ComputerName remoteservername -ConfigurationName checkperms
$ADIdentityReference =
#Coax an AD identity reference out of the button monkey
Invoke-Command -ScriptBlock { .\PermissionsScript.ps1 } -Session $session -Argumentlist $ADIdentityReference |
ForEach-Object {
#Ask for more input, or quit
Remove-PSSession $Session
and on the remote end:
Param ($IdentityReference)
Try {
Get-ADSomething -Identity $IdentityReference -EA Stop |
foreach-object {
Do-SomeStuff
Catch {
#Return validation fail message
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Exporting line end point coordinates?

Hi,
I'm in desperate need of a script to export the coordinates of lines, or paths, it doesn't really matter, into a text document.
I've set my ruler up so the 0,0 is in the center of the image, because I need both 0,0 and -0,-0 to work for what I have in mind, basically using a document as a large Cartesian grid, which you can then extract coordinates of 'edges' or end points of lines from.
A little background on why I need it, for anyone curious. I figured out a way to build new worlds/maps for a game that generates terrain based on 'boundaries', which are drawn on, in a 2d plane, but I need coordinates to map these boundaries correctly. I could do it manually, where I'd hover my mouse over every edge or end of the line point, but this would save a LOT of time.
I'd be insanely grateful if anyone can help me out. I've tried looking for scripts or other software, but haven't been successful at all for what I really need.
The way I have my document setup is, 1 pixel per cm, 16384x16384cm. It's quite large, so most 'graph' software won't work for it. The grid itself works fairly well, I just need a decent way to export the coordinates from it.
Thanks in advance!
Edit:
Here, I made an example of a rectangle to give you guys the idea of which coordinates I'd need:
http://i.imgur.com/VILOwrL.png

Don't appologize, I was stuck on cm because I thought there wasn't another way, I only figured out after JJMack mentioned it, that it's possible purely by pixels.
First time working with coordinates, I'm in total new territory.
The above works great, except now I've stumbled across 2 new problems, sorry to make it so complicated!
What I have now, slightly tweaked what you gave me:
var dataFile = new File('~/desktop/exportData.txt');
var doc = app.activeDocument;
    for(var c =0; c<doc.layers.length;c++){
       doc.activeLayer= doc.layers[c];
var pathItem = doc.pathItems[doc.pathItems.length-1];
var dataStream = "";
for(var subPathIndex = 0;subPathIndex<pathItem.subPathItems.length;subPathIndex++){
    for(var pointIndex = 0;pointIndex<pathItem.subPathItems[subPathIndex].pathPoints.length;pointIndex++){
                dataStream = dataStream+doc.activeLayer.name+'\t';
        dataStream = dataStream+pathItem.subPathItems[subPathIndex].pathPoints[pointIndex].anchor+'\t'+'\r';
        dataStream = dataStream+'\r';
dataFile.open('w');
dataFile.write(dataStream);
dataFile.close();
But this outputs this:
Background     4222,0
Background     2963,-3550
Background     4330,-4210
Background     6450.3937,-2459
Background     6141,2387
Background     4834,2891
Background     3970,924
Which made me realize, that the paths aren't bound to a layer (It's been a while since I've used paths), so it'll just use the Background layer. There is no way around that, right? Since this script only targets layers, it'll ignore path names, which brings me to another question, is it possible to use the same thing, only for saved paths? So if you had 2 paths, one named P1 and the other P2, that it would display it like:
P1     4222,0
P1     2963,-3550
P1     4330,-4210
P1     6450.3937,-2459
P2     6141,2387
P2     4834,2891
P2     3970,924
And the other thing, because I'm using a loop now, which basically repeats the \r after ever coordinate, there isn't a way to collect all coordinates and display them in a chain, basically, and then using the \r after all the coordinates for one path is exported, before it moves on to the next path, or? Basically like the post previous to this, except with paths, instead of layers.
Thank you guys so much for helping me though, would been completely lost without it.

Getting the end point to end point connections paths that exist from Switch Exe

Can I query the Switch Exe data base and get a list of the existing paths that Switch EXE has connected?
I have a debug app that reads the channel names (via a property node) and present them to the operator to manually connect and disconnect paths using the end points. I would like to have an indicator showing the current paths that are connected and I was hoping to be able to get that from Switch Exe without me having to add code to keep track of it myself.
The goal is to be able to click on any existing path to disconnect it.
I do query the switch cards and display the actual relays that are closed, but that is hard to relate that to what channels that are connected when we have 8 matrix cards all interconnected.
Thanks
Omar
Omar

Hi Omar,
Try using something like the example below that incorporates an array to check every connection. If the path is found to exist, then you could add that combination to an array that is displayed on the front panel. Also see this knowledge base article about the known issue with the Find Routes VI. Use the VI from the bottom of the page in place of the Find Routes from the palette. Hopefully this helps!
Regards,
h_baker
National Instruments
Applications Engineer
Digital Multimeter Resources

Defining End point

Similar Messages

Maybe you are looking for