Defining Folders For Project Window And On HD

Hi, haven't seen an option in edit/preferences or forum/search or google regarding defining folders (bins) in the project-window and on the hard-disk where for example audio recordings in Premiere would be organized in ... same for movie files created within Premiere ...
is there such an option available ?

This really comes down to how a person likes to work, and the level of organization, that makes them most comfortable. There is really no right way/wrong way (within reason), but personal choices.
For the HDD folder layout, this ARTICLE goes into a bit of detail, on how I like to work - however, it is personal to me, and also takes one thing into consideration, that might not be important to you - considering migrating a Project from one computer to computer. I give up some ultimate performance, by keeping things on one HDD. If migration is not a concern, performance can be improved, by placing certain folders onto separate, physical HDD's.
For Bins, it is pretty much the same setup, for me, though the exact Bins, and number of Bins, will fluctuare, depending on my Project, and one the various Assets. I like things compartmentalized, so might have a Video Bin, with several other Bins below that. Same for Audio/Music, or for Still Images. I like to have all of one type of Asset, say Titles (from Photoshop) in one Bin, under Titles, so I can twirl closed all other Bins, but still have everything that I need, at that point in the edit, in my one open Bin. This is especially important, if I will be working on that Project (at least part of the time) on my 17" laptop, where screen real estate is extremely important.
There is no one way to do either, the HDD folder/sub-folder layout, or one's Bins. Mine is but one way, and works for me - those last two words being very important.
Good luck,
Hunt

Similar Messages

  • [svn:fx-trunk] 13276: Min/ Max size fixes for AIR Window and WindowedApplication.

    Revision: 13276
    Revision: 13276
    Author:   [email protected]
    Date:     2010-01-05 07:18:31 -0800 (Tue, 05 Jan 2010)
    Log Message:
    Min/Max size fixes for AIR Window and WindowedApplication.
    AIR won?\226?\128?\153t allow you to set the min width greater than the current max width (same is true for height). You also can?\226?\128?\153t set the max width less than the current min width (same is true for height). The code that sets nativeWindow.minSize and nativeWindow.maxSize has been modified to take this into account.
    QE notes: None.
    Doc notes: None.
    Bugs: SDK-24566
    Reviewer: Corey
    Tests run: checkintests, apollo/spark/components/Window.as, apollo/spark/components/WindowedApplication.as, apollo/Window, apollo/WindowedApplication
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24566
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/Window.as
        flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
        flex/sdk/trunk/frameworks/projects/airspark/src/spark/components/Window.as
        flex/sdk/trunk/frameworks/projects/airspark/src/spark/components/WindowedApplication.as

    THank you , Nancy. Appreciate the input.
    So instead of this:
    <a class="brand" href="index.html"><img src="../img/logo-ca.png"alt="Consumers Advocate Review"> </a>
    Would it be something like this?:
    <a class="brand" href="index.html"><img src="http://ConsumersAdvocate/img/logo-ca.png"alt="Consumers Advocate Review"> </a>
    And if I do that, is there a way to cope with that locally so that DW can still display the images?
    jeff

  • Setting Cursor - For a window and application wide

    Hi,
    Can somebody please help with a cursor problem ? I am not able to set the busy cursor for a frame when the application is doing some work. I have tried many methods of doing this (some of them from these forums...) but still I am not able to make this work.
    1) setting the cursor before doing the work and resetting after the
    work doesnt work.
    2) setting the cursor for the window by calling
    Window window = SwingUtilities.windowForComponent(getRootPane().getGlassPane());
    window.setCursor(Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
    This works but the events are not blocked by the frame i.e if i
    click on any part of the window like a button or something, that
    event is fired after the work is done. So this is not good.
    3) created a glass pane for the window and blocked all the events. Then
    set the cursor for the the glass pane. This does not work either
    since the event thread is doing the work. So had to create another
    thread to do the work. This works but when the cursor is reset back,
    it doesnt reset. I have to move the mouse a bit to reset it. So this
    is not good either.
    4) created a work around for the cursor by creating a modal dialog box
    saying "Processing..." in the event thread and doing the work in the
    worker thread. The worker thread posts an event to dispose the
    dialog box after the work is done. This works perfectly though it is
    still not good because the cursor is not showing busy. Because of
    the modal dialog box, the user cant do anything in the application
    which is exactly what i want. Is this ok ? Can somebody provide any
    other work around for this ?
    5) Also I have another question for you guys. In the worker thread if i
    do something like updating the gui etc., it takes a lot of time
    almost 10 times more than when the work is done in a single threaded
    environment. Is this because of the communication between the worker
    thread and the event thread ? If I do only data related work not gui
    work in the worker thread, this is fine.
    I am new to Swing, so somebody please explain to me if they can.
    My environment is JDK 1.1.7, Swing 1.1 on Sun Solaris 2.5.1. Is this because I am using old versions. Is this resolved in the newer versions like 1.3 etc ?
    -Vijay

    moetunes wrote:I thought a
    chmod u+rw /path/to/.conf
    chmod go-rw /path/to/.conf
    would set the file to be read only by the user that owns it.
    That is all true.  The problem is the need to give a user the ability to run a program that has secrets that should only be visible by root.  If you give the user ownership, they cab see the keys to the kingdom.
    For example, you may want to allow a user to connect to an arbitrary wireless access point.  Generally, this is a privileged operation -- you want to give them permission to do it, but don't want to give them ownership.  You may also not want them to be able to see or modify the pass phrases.

  • Text for ipad,windows and android

    Hi
    I'll publish a folio for ipad , windows and android.
    If I have understood correctly, Is the best way to create an iPad version first and use the same folio to the other platforms.
    I have made a folio of 1024x768 and has 16pt for body text. PDF format.
    The problem is that the text is ugly in Android and Windows versions.
    What should I do to get the best deal on the windows and android versions?
    Regards
    Ake

    I have attached three screenshots.

  • Can we define users for both studio and integrator server

    Can someone please let me know how can we define users for both studio and integrator server so that the user can be used to view UI page but not modify it.I want to define user in studio which will access the Page but not modify it. And the user in integrator server should be able to view scheduled jobs.
    Thanks a lot.
    Regards,
    Amrit

    Amrit,
    Both Studio and Integrator Server support LDAP. See http://docs.oracle.com/cd/E35976_01/studio.240/eid_studio_users/toc.htm#Integrating%20with%20an%20LDAP%20System%20to%20Manage%20Users for details about implementing LDAP in Studio. For Integrator Server, see "LDAP Authentication", p. 38 (document pagination; p. 44 pdf file pagination) in the Integrator Server Guide (http://docs.oracle.com/cd/E35976_01/integrator.240/DataIntegratorServer.pdf).
    RLJII

  • How to defining mimetypes for project?

    Which is the way to define mimetypes for a project?

    Stephen,
    Now I know that setting this signal is not possible for this resource.
    But I always thought that the less threads in process are the less CPU consumption is, which means that not all cpu-shares are used?
    So if I have the case that application server has a control loop which
    is responsible for finding the optimal size of thread pool, then it can rely on SIGXRES which indicates that cpu-shares threshold is exeeded and size of thread pool shouldn't be increased.
    Anyway if signals are not supported threre is a possibility to analyze syslog messages which for me is unconfortable.
    I appreciate your help!
    marcin

  • External hard drive for both windows and mac

    hello, all - just bought a western digital 500gb my book premium edition external hard drive. will be using for both pc and macbook, not necessarily to share files (though i may on occasion), but rather as a backup. been researching the discussion boards and concluded that i should use it as pre-formatted fat32. few questions...
    1) if i do use to share files, from what i understand i will be able to read windows files with my mac but i can't read mac files with windows (unless i have macdrive installed). is this correct?
    2) since mac can read/write to fat 32, is it necessary to partition the drives and keep the files separated? i talked to a "computer guy" earlier today and he said i should consider having two completely separate external hard drives as having files from two different operating systems on the same drive could cause major problems for both... i didn't really believe him.
    3) i have seen different posts stating using fat32 format for mac limits file size to 4gb. another post said 32gb. which is right? i have os is 10.4.7 if that makes a difference.
    thanks in advance for any insight.

    2 - i don't mind partitioning at all. but he strongly suggested not even partitioning but using two completely separate hard drives. yeah, the 500gb was a bit overkill, so if i can use it for both as opposed to one and buying an additional, i'd rather.
    2/3 - if i partition, is it best to divide it into ntfs and hfs+? or should i keep the pc portion fat32? if the mac portion is hfs+, can i store any size file? i have videos that are anywhere from 10-20gb, and i'd like to get them off my computer and into the external drive.
    thanks.

  • Slideshows which work for Mac, Windows AND ipads/iphones???

    Hi.
    My first post here & just getting into mac after many decades of windows!!
    After much searching around I have finally found a place (Yola) where I can design a website which is compatible with all browsers/mac/windows..hurray.
    However, due to the type of work that I do I need to display 50 photos (before/after). I want to do this with a slideshow. I have made up around 8 from different sites but each time there's a compatibility problem with ipads or iphones (but no problem with mac/windows/nokia smartphone).
    Is there a slideshow (FREE) which will work across all platforms? Is iphoto the only way - and will that work with windows and is there a free version.
    Finally, the website design software uses 'widgets' to place code into the site for photos/slideshows etc etc.
    Any help would really be appreciated!
    David
    PS Hope to be getting an ipad soon.

    come on guys, someone here must play some games on their intel mac?
    please help me make my mind up

  • IMovie showing one thing on the project window and different one in preview

    I have create an iMovie project with iMovie 08. On the project window I could see my pictures as I have imported, in the perfect order and with the correct orientation. I just installed iLife09 and I opened the project on iMovie09. The project window shows pictures in a random order, the orientation of some pictures are wrong (upside down, portrait etc). But to my surprise if I play the video or move the mouse over the pictures it shows the correct picture on the preview window.
    What's wrong ?

    I'm having a similar problem. Any fixes?

  • How to export for both windows and mac users

    I'm new to the video stuff, so i have a few questions. i am planning to post videos on my blog. I want to have them in a format that both windows and mac users can play. is this a possibility or will i have to export .wmv for windows and quicktime for mac? i realize that windows users can download quicktime, but i either want the video to be viewable in a format that can be read by all without having to download anything (might be too big a wish :o) ). if i can't do that, then i'd like to have 2 links - one for quicktime and one to the .wmv. in this case, how to i export a .wmv file? i don't see that option anywhere on the share menu? do i need to buy quicktime pro? that leads me to another questions - if i have imovie, do i need quicktime pro? so far i'm having a hard time figuring out what quicktime pro has that imovie doesn't....thanks in advance!

    I'm new to the video stuff, so i have a few questions. i am planning to post videos on my blog. I want to have them in a format that both windows and mac users can play. is this a possibility or will i have to export .wmv for windows and quicktime for mac? i realize that windows users can download quicktime, but i either want the video to be viewable in a format that can be read by all without having to download anything (might be too big a wish :o) ).
    Posting to YouTube and providing a URL link might be the most universal method of playback although quality may be on the weak side.
    if i can't do that, then i'd like to have 2 links - one for quicktime and one to the .wmv. in this case, how to i export a .wmv file?
    WMV is a proprietary compression format. You will either have to purchase the authorized QT components from Flip4Mac or purchase a separate open source converter application like Visual Hub.
    i don't see that option anywhere on the share menu?
    Any you won't even if you purchase and install the QT component -- iMovie '08 only exports to QT compression formats.
    do i need to buy quicktime pro?
    It wouldn't help. Getting QT Pro only unlocks editing and conversion features. It does not add any additional codecs which don't already have installed.
    if i have imovie, do i need quicktime pro? so far i'm having a hard time figuring out what quicktime pro has that imovie doesn't.
    As indicated above, QT Pro allows you to convert to/from any compression formats for which you have working import/export QT components. This can already be be done using GarageBand and iMovie. GarageBand allows you to access any installed QT import/export component while iMovie '08 restricts you to Apple QT components. In addition, QT Pro allows you to create player displays with multiple audio/video tracks, gives you ability to layer graphic elements (e.g, create watermarks, create pictures-within-pictures, etc,), allow the viewer to switch between alternate audio and/or video tracks, and may other things.
    ADDED: If you really want to see what QT Pro can do, check out QTKirk's examples on his DotMac account.
    Message was edited by: Jon Walker

  • Skype for Modern Windows and Skype for Windows Desktop on a tablet???

    Hi All. I am a newby here so please be patient I have a 6 month old Toshiba Encore that comes installed with "Skype for Modern Windows". When I opened Skype today I received an advice/advert saying that this service will cease July 7 and I should uninstall and update to "Skype for Windows Desktop". News flash.... I have a tablet and it is telling me to install a Desktop version? Is this correct, dispite that my device is a (Windows 8.1) OS tablet, am I still required to make the conversion? Any advice most appreciated.  

    And just in case your next question is "Why". I am just a user like you so no inside knowledge but from what I have read it is partly down to the "Modern" version actually being based on "Old" tech, so it couldn't intergrate with the cloud based future of Skype and partly down to it isn't probably worth fixing (It had a lot of issues that I could see). Unfortunatly for some it is a bit inconvenient that it's being killed off before Windows 10 is released. The one thing I liked about the "Modern" version was the intergration with for example your contacts in the people app, but if you uninstall (Or when it gets killed off in a couple of weeks) you lose that intergration. I know you still have it in Outlook with intergration for the desktop version but to be honest Outlook isn't great on a seven inch tablet either. From my understanding when 10 is finally here and Skype catches up there will be full Skype intergration with your contacts again (Although I could be wrong and that is for the WP). Anyway, I for one would love MS to consider the universal app idea based on the WP version for smaller or all tablets. Maybe someone from Skype will reply?

  • APIs for Project Events and Project Invoices

    Hi All,
    Can anyone tell me the APIs for creating project events and project invoices.
    any help will be greatly appreciated.
    Thanks
    gt1227

    Hi
    go through the below link, all API for projects API's are listed
    http://docs.oracle.com/cd/B12190_11/current/acrobat/115pjapi.pdf
    Thanks
    Krishna

  • Project Plan/Schedule for Project Pro and Project Server 2013 Install

    Looking for a project plan/schedule for a dept. wide install of Project Pro and Project Server 2013. Anyone have one to share?

    In Project Professional 2013 there are two templates:
    Install Project Server 2013 and Upgrade to Project Server 2013.  You may search for either template.
    Here is a direct link:
    http://office.microsoft.com/en-us/templates/results.aspx?qu=project&av=zpj150&queryid=312801ca-a859-48dd-af56-714e81c97cf4#ai:TC103345703|

  • How to use Classification Characteristics for project definition and WBS

    dear all:
    my step is below:
    1,  CT04, create "Characteristic"
    2,  CL02, create "Class". and class type is "14".
    3,  now how to customize to use the class in project definiton and WBS.
    Please explain me all the steps to be required.
    Thanks in advance!

    Hi
    Classification is only assigned for the network profile or in the activity.
    CJ20N  -
    > Extra ---> Classification --- > Classification
    Hope this will help you.
    Regds,
    Uddhab

  • Enhancement for project definition and WBS element.

    Hi Experts,
    I have a client requirement for creation of the custom specific fields for the project definition and the WBS element level called IT relevant and they need to use this fields for the purpose of structured reporting in PS.Can you please guide me as to how do in need to do this.
    When i go in to the transaction CMOD and SAP Program SAPMSMOD it says you are not authorised.Please let me know the process as to how it has to be done.
    Thanks for your cooperation.
    Shivkumar

    Refer the IMG documentation against the SPRO node 'Create Customer-Specific Fields in a Project Definition' and 'Create Customer-Specific Fields in a WBS'.
    Regards
    Sreenivas

Maybe you are looking for